Group Policy (Windows Server 2012)

I am using Microsoft Server R2 Standard Edition 2012. I facing ' am question is, I applied a group policy, to block all USB ports on computers in the domain. So without knowing it also applied to the servers in the network. After a while I had to disable the NIC in the server and hit restart. To my great surprise, the group policy is applied, and I am unable to use same USB keyboard and mouse after the restart of the process to the Welcome screen.

Please post your query to:

https://social.technet.Microsoft.com/forums/

Server issues are better addressed there.

Tags: Windows

Similar Questions

  • Management of Group Policy Windows Server 2008R2

    Recently, the User Configuration Group Policy settings for my domain failed. I got the following error when you run the resultant set of policy on several different positions with a test user: Group Policy Infrastructure failed due to the error below. Not been found. Note: Due to the GP Core failure, no other component processes Group Policy policy. Consequently, status information for the other components are not available.

    We have a single domain with eight domain controllers, 30 servers members and approximately 220 positions clients working in three different time zones

    What should I watch?

    Your question is out of reach of these forums as server issues are best addressed on Technet:

    https://social.technet.Microsoft.com/forums/

    So please post your request there.

  • How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

    Hello

    I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

    I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

    "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

    Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • How can I add a language bar on taskbar domain member station work by windows server 2012 group policy

    How can I get the language bar on workstation member domain "taskbar of Windows server 2012. GPO

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Windows Server 2012 lost connectivity

    Hi all

    I created 6 virtual servers Windows Server 2012 R2 Standard. However, there are 2 weeks 3 to 6 servers randomly lost connectivity (ping returned request) outdated, unable to control remotely,... several times until I have restart servers, connectivity was back. Even if 3 other servers do not have this problem.

    I found the following error events in the event viewer, I don't know if they cause this problem or not:

    Log name: System
    Source: Schannel
    Event ID: 36888
    A fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is 252.

    Reference: https://msdn.microsoft.com/en-us/library/windows/desktop/ms678421(v=vs.85).aspx

    -------------

    Log name: System
    Source: NETLOGON
    Event ID: 5719
    This computer was not able to set up a session securely with a domain controller in the domain GHPFE because of the following:
    Currently, there are no available connection server to process the logon request.
    This can lead to authentication issues. Make sure that this computer is connected to the network. If the problem persists, contact your domain administrator.
    MORE INFO
    If this computer is a domain controller for the specified domain, it puts up the session for the specified domain PDC emulator. Otherwise, this computer sets up the session secure at any domain controller for the specified domain.

    Microsoft warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

    -------------

    Log name: Application
    Source: CAPI2
    Event ID: 4107

    Has not taken from the root list third-party auto update cab at: http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: these data are incorrect.

    -------------

    Log name: System
    Source: Client DNS events
    Event ID: 8015
    The system cannot save the host (A or AAAA) resource records (RR) for the network adapter

    -------------

    Log name: System
    Source: Group policy
    Event ID: 1054
    The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Check your service provider Internet (DNS, Domain Name System) is configured and working properly.

    Microsoft Cause: This problem may occur if the address of a preferred DNS server configured on the client is invalid or is inaccessible.

    -------------

    Is there anyone know of this problem and the resolution to it? Help, please.

    Thank you

    Khiet Manh

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Remote access Windows Server 2012 through internet with desktop connection

    Summer messing about with it for days and don't get no love.

    Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

    Tried all these steps found in this promising and useful article:

    http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

    1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

    2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

    3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

    4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

    5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

    6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

    But the result of the message is always the typical:

    (1) remote access to the server is not enabled.

    > But this is not true, that I am capable of the DRC at home on the server machine.

    (2) computer remote is not off.

    > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

    (3) the remote computer is not available on the network.

    > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

    So... what to do, what to do...

    The wifi booster is a problem?

    Connects to the Data Center edition a problem?

    What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

    Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

    Thanks for any input.

    / Markus

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Configuration VPN windows server 2012 essencial

    What policy I need to add in the game until I will configure the VPN in windows server 2012 essential? because when I install the remote access roles I received a message when done that mention me politics. later I activate access and remote access and I can't access the internet, I disable access and remote access to I can connect to internet from my server.

    There is no forums for Windows Server community.  Windows Server forums are on the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  • monitor Windows Server 2012

    Hi guys,.

    has anyone tried to monitor a Windows Server 2012?

    I have configured the IC agent and information identification and on the box, I added a user located in some management groups, but all I get is the following alarm:

    Could not establish a connection to the : receipt HTTP/401 - rejected powers

    Any ideas?

    Best regards, Falco

    FglAM tries to automatically detect the Kerberos parameters to Negotiate authentication, but (currently), this can be done on Windows machines. R & D is studying the possibility to detect automatically on Unix machines for a future version. Current to negotiate authentication from a Unix system, the krb5.conf file needs to be provided for WinRM (using the Negotiate authentication) to work. Foglight admins can provide the krb5.conf file themselves using the substitution of debugging option described in the section of the documentation of FglAM Configuration of Windows Remote Management (WinRM) .

  • Then Windows Server 2012 or any version of Windows Server can detect whether a USB WindowsToGo is used?

    Hi, I am a newly assigned system admin and don't make broad not yet know about it as I met recently. I managed a small business is composed of 15 to 20 computers. The previous system already admin configured everything ADC Policy GPO. An employee was able to install a software game on a computer she used when I checked, she was using the WindowsToGo USB. I am a little confused because it never trigger alarms on the ADC server, assuming a different computer on the WindowsToGo name. Is there a way to monitor this or any third party software that could determine if any WindowsToGo USB or a USB bootable is used?

    Sorry, bad forums.

    TechNet forums - Windows Server 2012 General - Microsoft

    Post here.

  • OMSA on Windows Server 2012

    I installed v7.3 of OMSA on a new Windows Server 2012 box.   The installation seemed to go OK, but I'm having a problem that can connect to it with the domain credentials.   He seems to accept the credentials, but then it immediately comes to the login prompt.  The reason why it seems to accept, is that if I type intentially incorrect credentials, then he will say "Login Failed", but if this is correct, it refreshes the screen just and returns to the login prompt.  This happens if I'm logged in locally on the server or do it remotely.   I added the server to my confidence and groups of the intranet in the browser.  I turned firewall.  I check the box "Active Directory" (although I tried it checked and it does not work either).  No errors appear in the newspaper, unless there is a newspaper in the OMSA directory I should be looking.   If I type in a local account, such as \Administrator with a password, it connects and works.   I have installed on all our other servers OMSA and they don't seem to have a problem, but it's our first box Server 2012, others are all 2008 R2.

    Any thoughts?

    FYI, Dell has released a fix for 7.3.0.1 and this issue seems to have been fixed!

  • Windows Server 2012 stuck at startup when running on top of KVM with active regrouping of CPU

    Hi all

    We observe an interesting problem when running Windows Server 2012 on top of KVM to multiple processors.

    When the collection of the CPU is disabled, Windows starts and works very well.

    When the grouping of CPU is activated by:

    bcdedit /groupaware on
    bcdedit /groupsize 2

    Windows hangs at startup while displaying a black screen with logo and won round progress indicator.

    We have produced the crash dump by injection of interruption NMI via QEMU/KVM debugging facilities, the look of stacks of appeal as follows:

    0: kd > ~ 0
    0: kd > kv
    Child-SP RetAddr: Args to child: call Site
    ' fffff803 ' 95645 c 08 fffff803 ' 941828de: 00000000'00000080 00000000' 004f4454 00000000'00000000 00000000'00000000: nt! KeBugCheckEx
    ' fffff803 ' 95645 c 10 fffff803 ' 93b66c09: 00000001' fffff803 00000000 ' 94196030 00000000 00000000' fffffa80' 05654968: hal! HalBugCheckSystem + 0x9a
    ' fffff803 ' 95645 c 50 fffff803' 94183204: 00000000 ' 000006 c 0 fffff803 ' 95645e30 fffff803 93 d 03100 fffff803'94196030: nt! WheaReportHwError + 0 x 249
    fffff803 '95645cb0 fffff803' 93be17a7: fffff803 '95645e70 00000000'00000010 00000000'80000005 fffff803' 93a2227d: hal! HalHandleNMI + 0 x 150
    fffff803 '95645ce0 fffff803' 93a84d02: 00000000' 32f7fc10 fffff803'95645ef0 00000000 00000000' fffff803 93 d 03180: nt! : FNODOBFM: 'string' + 0x13d6d
    ' fffff803 ' 95645 30 fffff803 d ' 93a84b73: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KxNmiInterrupt + 0 x 82
    ' fffff803 '95645e70 fffff803' 93abb0cb: 00000000 ' 00000000 fffff880 ' 0315efb8 00000000'00001000 00000000'00000000: nt! KiNmiInterrupt + 0 x 173 (TrapFrame @ fffff803'95645e70)
    fffff880 '0315eab0 fffff803' 93b0191b: 00000000'00000000 00000000'00000000 fffff880 '0315f200 fffff803' b 9417, 291: nt! KeFlushMultipleRangeTb + 0x3c0
    fffff880 '0315ecb0 fffff880' 01709b 45: fffffa80 '018a 7040 00000000' 0f0049ed fffff880' 0315f200 00000000' 00000000: nt! MmSetAddressRangeModified + 0x14b
    fffff880 '0315edb0 fffff880' 0170a 471: fffff8a0 '00ba0010 00000000' 0f004b81 00000000'00000001 00000000'00000500: Ntfs! LfsFlushLfcb + 0xa55
    fffff880 '0315efc0 fffff803' 93ac8df5: fffff880'0315f160 fffffa80 '0187a6a8 00000000 00000000' fffffa80' 05621b 80: Ntfs! LfsFlushLfcbCallout + 0 x 25
    fffff880 '0315eff0 fffff803' 93ac9d85: fffff880 '0170a44c fffff880' 0315f160 00000000 00000000' fffff803 93 d 03180: nt! KeExpandKernelStackAndCalloutInternal + 0xe5
    "fffff880 '0315f0f0 fffff880' 0170 has 434: 00000000'0000000 fffff803 ' 93 d d 03180 fffff803 93 d 03180 fffffa80 ' 018a 7040: nt! KeExpandKernelStackAndCalloutEx + 0 x 25
    "fffff880 '0315f130 fffff880' 017cbe9b: 00000000 ' fffff8a0 00000000 '00ba0010 fffff880' 0315f200 fffff8a0 ' 00b 18901: Ntfs! LfsFlushLfcbOnNewStack + 0 x 50
    fffff880 '0315f190 fffff880' 017c8f75: fffff8a0 '00ba0010 00000000' 0f004b81 fffff880 '0315f480 fffff8a0' 00b 18950: Ntfs! LfsFlushToLsnPriv + 0x13f
    fffff880 '0315f230 fffff880' 017c851f: fffff8a0 '00ba0010 fffff8a0' 00ba0010 fffffa80'057 c 2480 00000000'00000062: Ntfs! LfsWriteLfsRestart + 0 x 145
    fffff880'0315f290 fffff880'017 c 6083: fffff8a0'00b98c10 fffff880 '00000070 fffff880' 00002102 00000000 00000000': Ntfs! LfsWriteRestartArea + 0x15f
    "fffff880'0315f3d0 fffff880'017 c 9889: 00000000 ' 00000000 fffff880 ' 0315fa90 00000000'00000000 00000000'00000000: Ntfs! NtfsCheckpointVolume + 0x6f3
    fffff880 '0315f920 fffff880' 017c57eb: fffff880 '0315fa90 fffff880' 0315fa90 fffffa80'057 c 2188 00000000 00000000': Ntfs! NtfsCheckpointAllVolumesWorker + 0x61
    "fffff880 '0315f970 fffff880' 017c954c: fffff880'0315fa90 00000000 00000000' fffff880 ' 017 c 9828 fffff880 ' 0315fa40: Ntfs! NtfsForEachVcb + 0x1bb
    fffff880 '0315fa10 fffff803' 93ac0391: fffffa80 '018-7040 fffff880' 0175d6d8 fffff803 93 c 91080 fffff803 93 c 91000: Ntfs! NtfsCheckpointAllVolumes + 0x12c
    fffff880 '0315fcc0 fffff803' 93a2f521: 00000000'00000000 00000000'00000080 fffff803 '93ac0250 fffffa80' 018a 7040: nt! ExpWorkerThread + 0 x 142
    fffff880 '0315fd50 fffff803' 93a6ddd6: fffff803 93 d 03180 fffffa80 '018-7040 fffffa80' 018bd040 fffffa80'01897040: nt! PspSystemThreadStartup + 0 x 59
    "fffff880'0315fda0 00000000' 00000000: fffff880 ' 03160000 fffff880 ' 0315a 000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16
    0: kd > ~ 1
    1: kd > kv
    Child-SP RetAddr: Args to child: call Site
    fffff880 '031ce940 fffff803' 93a5319b: 00000000 00000000' fffff880'04171000 00000000 '80000002 00000000' 00000001: nt! KiIpiSendRequestEx + 0 x 166
    fffff880 '031ce990 fffff803' 93a4d364: 00000000'00000040 00000000'00000040 fffff880 '031cebb0 ffffffff' ffffffff: nt! KeFlushSingleTb + 0x11b
    "fffff880 '031ceab0 fffff803' 93a4e9fc: 00000000 fffffa80'20000000'd 250 0178 00000000' 0007d9b7 2aaaaaaa ' aaaaaaab: nt! MiStealPage + 0 x 914
    fffff880 '031cee60 fffff803' 93a4ff87: 00000000' ffffffff 00000000' 0007d9b8 00000000'00000103 20000000' fffff803: nt! MiClaimPhysicalRun + 0x1fc
    fffff880 '031ceee0 fffff803' 93e8ea59: fffff880 '031cf2e9 00000000 00000005' fffff880' 0198f000 fffff8a0'00015470: nt! MiFindContiguousPages + 0 x 337
    fffff880 '031cf030 fffff803' 93e8f0ec: 00000000' 7d9b8963 00000000' 0007d9b8 00000000 00000000' fffff8a0'00003000: nt! MiAllocateDriverPage + 0 x 49
    fffff880 '031cf0a0 fffff803' 93e9eafb: 00000000 00000000' fffff880 '031cf2e9 00000000 00000000' fffff6fc' 4000cc78: nt! MiLoadImageSection + 0x23c
    fffff880 '031cf230 fffff803' 93e9f43e: fffff880'031cf390 00000000'00000000 00000000'00000001 00000000'00000000: nt! MmLoadSystemImage + 0x1c3
    fffff880 '031cf340 fffff803' 93e9979c: fffff880 00000000'00000000 00000000'00000000 ' 031cf860 00000000'00000003: nt! IopLoadDriver + 0x2ca
    fffff880 '031cf610 fffff803' 93e97fb6: fffff8a0 '00d04e00 fffff880' 0097b 340 00000000'00000000 00000000'00000000: nt! PipCallDriverAddDeviceQueryRoutine + 0x22c
    fffff880 '031cf730 fffff803' 93e95bc0: 00000000 00000000' fffff880'00000002 00000000 '00000000 00000000' 000007ff: nt! PnpCallDriverQueryServiceHelper + 0x13e
    "fffff880 '031cf7b0 fffff803' 93e9611e: fffffa80 ' 01892010 fffff880 ' 031cfa40 fffffa80 ' 01887670 fffffa80'd 018 4700: nt! PipCallDriverAddDevice + 0x400
    fffff880 '031cf940 fffff803' 93f09c07: fffff803 '93a 91700 00000000'00000001 00000000'00000000 fffff803' 93d90a52: nt! PipProcessDevNodeTree + 0x1ca
    fffff880 '031cfbc0 fffff803' 93b1381f: fffff803 00000001'00000003 00000000'00000000 ' 93ce06e0 00000000' 00000000: nt! PiProcessStartSystemDevices + 0 x 87
    fffff880 '031cfc10 fffff803' 93ac0391: fffffa80 ' 01898040 fffff803 '93b134bc fffff803' 93ce06e0 fffffa80' 0189 c 600: nt! PnpDeviceActionWorker + 0 x 363
    fffff880 '031cfcc0 fffff803' 93a2f521: 00000000'00000000 00000000'00000080 fffff803'93ac0250 fffffa80'01898040: nt! ExpWorkerThread + 0 x 142
    fffff880 '031cfd50 fffff803' 93a6ddd6: fffff880 ' 02a 15180 fffffa80 ' 01898040 fffffa80'd 0188 040 fffffa80' 01897040: nt! PspSystemThreadStartup + 0 x 59
    "fffff880'031cfda0 00000000' 00000000: fffff880 ' 031 d 0000 fffff880 ' 031ca 000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16
    7: kd > ~ 2
    2: kd > kv
    Child-SP RetAddr: Args to child: call Site
    fffff880 '02aafa08 fffff803' 93b4e12a: fffff880 '00000006 fffff880' 00000003 fffff880 '02-92140 fffff803' 93b4e9e4: hal! HalProcessorIdle + 0xf
    fffff880 '02aafa10 fffff803' 93ab69a0: fffff880 '02a8b5c8 00000000' 05f5e100 00000000'00000000 00000000'00000000: nt! PpmIdleDefaultExecute + 0xa
    fffff880 '02aafa40 fffff803' 93ab53c0: 00000000 00000000' 0000040c 0000040'c fffff880 '02aafca8 fffff880' 02aafcb0: nt! PpmIdleExecuteTransition + 0x47f
    fffff880 '02aafc60 fffff803' 93ab354c: fffff880'02 has 86180 fffff880 '02a 86180 00000000 00000000' fffff880' 02a 92140: nt! PoIdle + 0x1e0
    fffff880'02aafda0 00000000' 00000000: fffff880 '02ab0000 fffff880' 02aaa000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c
    2: kd > ~ 3

    There are always two or more CPUs stuck in KeFlush...() functions dealing with IPIs. 

The problem looks like interrupt loss during IPI-ALL-BUT-SELF dispatching, we tried to track possible problems in KVM code that may lead to an issue like this but found nothing so far.The issue looks even more interesting taking into consideration that as far as we know CPU grouping is SW-only feature that doesn't have real effect on hardware.We will be grateful for any idea that could help to resolve the problem.Thanks in advance!P.S. Kernel crash dump is available at https://www.dropbox.com/s/07qb6wz9nacwhxn/MEMORY.DMP.zip?dl=0

    KV

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

    If you pt a link here I want a few resources for the thread on TN

  • AUSST 4.0 on Windows Server 2012 R2 installation

    Hello

    I am installing AUSST on Windows Server 2012 R2 with IIS 8.5, although I can't get the thing to work!

    I followed the instructions to use the Adobe update (AUSST) server configuration tool if I do something wrong.

    All updates have been downloaded to the directory "c:\AdobeCloudUpdate" (a little more than 80 GB). I created a new web site in IIS to point to this directory as root and set the permissions to the local group 'IIS_USERS' read, list, etc.

    I followed the instructions to add the types of files for maps to the level of the server, changed the classic and set AppPool to update the 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\web.config' file with the veriables add path to 5 file types.

    When you try to access the "updaterfeed.xml" of a client computer using the full URL of the "http://co-au-01.contoso.msft/webfeed/oobe/aam20/win/updaterfeed.xml", I get a XML page cannot be displayed error.

    Capture1.PNG

    I created a file of substitution of "AdobeUpdater.xml" and added this to a new package is created in Packager CC and deployed just Photoshop and Office CC application. When I load the soft CC I get a download error when you try to view the applications.

    Capture2.PNG

    I tried to change other web.config files not found on the Server IIS ("C:\Windows\Microsoft.NET\Framework\v4.0.30319\config") and also the v2 of .net and .net v4 in the 'C:\Windows\Microsoft.NET\Framework64', but no joy.

    I hope it's a very simple solution and just miss a step but little help would be highly appreciated.

    Thanks in advance,


    Tom

    Something I've discovered here is that you need to add a wildcard on the VAC/services/FAC file MIME type (more precisely the validation file), because the files of validation is not an extension so he threw back a 404 error.

    I hope it suits it for you!

  • Windows Server 2012 with EFI fails to start after reset of HA

    The purpose of this thread:
    1. a solution, if anyone else has this problem.
    2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

    The scenario:

    I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

    The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

    So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
    I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

    All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.


    Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

    Is it possible to test or confirm without killing an ESXi host?

    I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

    Hardware version is 9, EFI boot.

    Thank you!

    Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

    This is how I fixed the corrupt WS2012 boots:

    1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
    2. choose Help and then command Promt
    3. Run diskpart
    flight type list
    Locate the number of the partition-small FAT32 EFI, in my case nr 3
    Salt type flight 3

    type assign

    flight type list

    Choose the letter assigned, in my case E:
    Type exit

    4 cd /d e:\efi\microsoft\boot

    5 ren BCD BCD.bak

    6 bcdboot c:\windows/l en-us/s E: /f ALL

    7 bootrec /fixmbr

    Bootrec /fixboot

    Bootrec /scanos

    Bootrec /rebuildbcd

    Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

    8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

  • ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

    Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

    Thank you

    Hello:

    I don't work for or represent HP.

    All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

    With this track record, I doubt very much they will be.

    In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

    I've never seen a card driver wireless for windows server on the Intel Web site.

    Normally the equivalent standard windows drivers work on Windows server most of the time.

    For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

    But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

    You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

    Enable WMM for example.

  • Satellite C660 - 1 DG-drivers of Windows Server 2012

    I started Windows Server 2012 (for development purposes).

    Now... where can I find the drivers?

    * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
    * sound driver * -.

    What drivers Miss do you?

    Fact is that Toshiba offers all drivers for supported operating systems.

Maybe you are looking for