Remote access Windows Server 2012 through internet with desktop connection

Summer messing about with it for days and don't get no love.

Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

Tried all these steps found in this promising and useful article:

http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.
Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.
Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command
Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.
Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.
Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

But the result of the message is always the typical:

(1) remote access to the server is not enabled.

> But this is not true, that I am capable of the DRC at home on the server machine.

(2) computer remote is not off.

> But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

(3) the remote computer is not available on the network.

> Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

So... what to do, what to do...

The wifi booster is a problem?

Connects to the Data Center edition a problem?

What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

Thanks for any input.

/ Markus

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance? We received the Error Message:

The following error occurred during the occultation session 2 on the server...

This function is not supported on this system. (120)

I found the link: http://documents.software.dell.com/doc78042 or

http://documents.software.Dell.com/DOC145926

But this article has no recommendation for Windows Server R2 Standard 2012

Any help, I would be grateful.

THX in advance

Thomas

This question is not met at the time of the request

I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

Graphic driver Intel HD in Windows Server 2012

Hey guys, I downloaded Windows Server 2012 through Dreamspark yesterday and installed on my desktop. But the system cannot identify the Intel HD graphics 2000.When I try to install the official driver for Windows 8 to Intel. An error window came out and said that "the system does not reach the installation requirements.

Could someone help on this problem, please? I expect Windows Server 2012 for a long time and this problem has made things stuck. I can't use my HD display at a very low resolution.

Thank you.

Uninsured, I don't know exactly what a thing make you laugh. No matter you believe it or not, it's here: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21180&lang=eng

As I already said, what I find funny is the fact that some people like to say things like: "they have been waiting for Windows Server 2012 for a long time..." As it was the most important thing in the world, and as they wait for so long - it is a situation of fire for volunteers drill, they ask to. It is the exaggeration of the issue that I find humorous. Always, always will exist. People think if they fall a few names, to mention a few things that make this situation 'important' for them - others will be more willing to help. Often, this is the case - the human nature.

Back to the part that mattered...

"This software package will install the driver for the Intel® WHQL Intel HD Graphics 3000/2000 and® HD Graphics 4000/2500 for Windows 8 * Release Preview."

Intel has drivers on Windows Server 2012 for other devices, but obviously not for the one you look at. Just because they have one for Windows 8 does not mean it will work in 2012 Windows.

Your problem is with Intel and what drivers they offer, not Microsoft (as I said already.)

The drivers that you linked are for the Preview Release (foot) of Windows 8.

If I were you, I would try all the drivers Windows Server 2008/2008 R2 for the product in question. Although my quick research shows that none occurred for this chipset (probably because Windows Server is not a market that intel pushes for this chipset)-Yes, then I suggest to try the driver for Windows 7. Using a Windows driver 8 beta is obviously NOT to give you the desired results.

Try the Forums from Intel.

Displacement of 10g windows server 2003 to 11g windows server 2012
Hi all

I installed oracle database 10g r2 32-bit on 32-bit windows server.

I want this database to the next server.

Windows server 2012 64-bit with Oracle database 11g r2 64 bit.

How to do this?
Currently 11 GR 2 is not taken in charge/certified on Win 2012 - so you will not be able to perform this migration/upgrade

Re: What is Oracle database supports Windows server 2012?

HTH
Srini

Windows Server 2012 BEX problem

Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...

Problem signature:
  Problem Event Name:   BEX
  Application Name: Tibia.exe
  Application Version:  10.9.3.0
  Application Timestamp:    5726e97b
  Fault Module Name:    Tibia.exe
  Fault Module Version: 10.9.3.0
  Fault Module Timestamp:   5726e97b
  Exception Offset: 00362276
  Exception Code:   c0000409
  Exception Data:   00000007
  OS Version:   6.3.9600.2.0.0.16.7
  Locale ID:    1033
  Additional Information 1: e6cc
  Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b
  Additional Information 3: 996a
  Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=280262

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

Can U help me?