Group residential remote station sees only not all drives on the primary computer

Similar Questions

• I try to connect to the creative cloud on my MacBook Desktop App and sees only a spinning wheel where the application must be open. On a related note, I'm signing CC because I thought that my Lightroom Develop module is disabled. Clues?

  I try to connect to the creative cloud on my MacBook Desktop App and sees only a spinning wheel where the application must be open. On a related note, I'm signing CC because I thought that my Lightroom Develop module is disabled. Clues?

  Mac https://forums.adobe.com/message/5470608 spinning wheel

• I see not all panels in the design of the space.

  I use Windows. I've updated to 2015 of CC, and I see not all panels in the design of the space. I do not see the libraries and much more. I have only the layers, align them and the Style HELP!

  Hi MalaevKosta,

  If you do not customize enough Photoshop Panel after the recent update, please reset the Photoshop preferences to default.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Your lowered obtained resolution. This can occur if you are running an older game that uses 800 x 600 for example.

  Control Panel > display > settings - change the resolution to correct for your monitor. MS - MVP - Elephant Boy computers - don't panic!

• I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers.

  I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers. When I plug in the headphones, the sound is loud and clear. I have troubleshooted and updated but still not his monitor. When troubleshooting, it is said that it can not detect a problem. I have a sound card. IM at a loss of what else to do. Others that sound, the monitor works fine. Help, please!

  Hello

  Troubleshooting with the monitor speakers sound problems

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01289551&LC=en&cc=us&DLC=en&product=3770742

  Also try to update the drivers of his last.

  I hope this helps.

• How to transfer bookmarks on my computer from firefox 3.6.10, Firefox 4 (not yet installed) on the same computer?

  How to transfer from my computer, Firefox 3.6.1 to firefox 4 (not yet installed) on the same computer, without anything losing favorite bookmarks?

  If you want to make sure you have your bookmarks in FF4. You can always back up your bookmarks on your PC and import it in FF4 later:

  Bookmarks > organize bookmarks > export to HTML

  then save it anywhere in your PC.

• Remote Desktop shows only not in system properties

  I'm trying to allow connections on a portable computer and connect via the internet on another.
  I've upgraded from vista Home Prem to Win 7 Home Prem 64 bit.
  I am using the MS. Remote Desktop feature  I read MS Help directions.  When I open the System Properties window and go to the Remote tab, I have the current text of Remote Assistance, but there is NO Remote Desktop block in the window.  It's just not there.  Same situation on another laptop that I have improved.  Help indicates that the feature is available in all versions.  Have not loaded all the features during installation, pourrais I be looking in the wrong place or it is not available in the NVA Home Prem?
  Can I access another computer remotely via the internet without this step?
  Also, how can I identify my full computer name (I prefer just using an IP address if possible)?  Not connected to a domain (just an internet connection and the Working Group), how can I find the remote computer?
  Thank you, Ken.

  I'm sorry, but Windows 7 Home Premium cannot accept office connections remotely on other computers.  This requires the complete edition or professional version.

  All versions of Windows 7 can connect to another computer using Remote Desktop connection.  That's what shows the help file.

  These programs allow Windows 7 Home Premium accepts connections remotely on other computers: TightVNC , TeamViewer , GoToMyPC .

  To use TightVNC, your computer must have an IP address or DNS name.  Dynamics of most of the ISP issue IP addresses, which can change at any time.  You can use a dynamic DNS service like DynDNS or No-IP to give your computer a DNS name.

• ESXi 5.5 use only not all vmnic

  Hi all

  We have 2 switches configured in esxi, one for internal communication (between hypervisor and storage servers and others) and an external (i.e. ssh). But I often find my ssh connection gets very slow when you try to do an ls or something simple in the storage server. In any case I had a glance esxi and I noticed that in the tab performance that only 2 vmnic is used (we have 4 physical network cards, so we have 4 vmnic). An external and an internal. Grouping of NETWORK cards is implemented and all network cards are attached to assets. What's weird is that in the performance tab all NETWORK card can be used, if I switch to a standby mode, another takes over. But all 3 are not used at the same time... Someone at - it ideas? I've attached screenshots.

  Thank you.

  OK, cool.  The installation program looks good... with a warning.

  As you road based on the selected original Virtual Port code, you must confirm with your BOD network that the physical switch is configured correctly.

  An excerpt from the VMware KB

  • The default load balancing strategy is route based on the port virtual origin ID. If the physical switch uses the aggregation of links, route based on the IP hash load balancing should be used. For more information, see host requirements for the aggregation of links for ESX and ESXi (1001938) and the guide of VMware Virtual Networking Concepts .

  So really you need to know how the switch is configured to confirm that it is compatible with ESX, or change the configuration of switch to work with ESX :-)  If you prefer or are more standard.

  The Ko with more details is here

  VMware KB: Grouping of NICs in ESXi and ESX

  Hope that helps, but I think that you are in the place where you need to talk to the network before proceeding

• CD/dvd drive read only not all disks

  When I put a disc in the drive says that there is no disk in it
  I've uninstalled and restarted the computer, and used the program fix
  and the computer says that it works correctly

  as I looked to filter things and he's not here

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  If necessary:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Open dialog box appears only not all files

  I just bought a new iMac (Yosemite 10.10.5 running version) and I have a problem with Illustrator (race 2015.1.0) when I try to 'open' or 'save' a document all my files in any folder are not displayed.  No matter how big or small the dialog box is that all files are more fit in this box.  It's a little hard to explain so I enclose a photo.  There are dozens of additional files that should be showing in this area.  On the right side of the box, you can see how file names are cut off.  There is more to the right of that.  I'm not able to reproduce the problem in photoshop or any other program on my computer so I figure it's a framework or a problem in illustrator.  Anyone can shed some light on this?

  I do not wish to use the column view that I need preview buttons.

  

  ammyzan,

  If you use the column view, run away until Apple has resolved the issues.

  I think that the good order/way is to update the operating system, and then reinstall the applications. Which was how you did it?

  If this isn't the case, it may be best to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Parameter list shows only not all BEEP report

  Hi Expert,
  
  I created a list of parameters in the editor of BI, is of type menu. I can only select on org, if I use 'ALL', in fact is the default, I want to show all the associations, but it shows nothing. How can I make it work?
  
  Thank you!

  Just type this in your where clause:

  where org = nvl (: p_org, org)

  This is because when you select 'All' as the value of the parameter value being passed to the query is "zero".
  That's why when the when clause evaluates the nvl function will return org redundant manufacturing condition
  and thus will run your query for all values of the org :)

  It is explained here:
  http://download.Oracle.com/docs/CD/E12844_01/doc/BIP.1013/e12187/T518230T518233.htm#4511631

  Hope this helps

  See you soon

  Jorge
  p.s. If that answers your question, then please give the points and close the debate

• New drive sees only not in disk management

  I have a PowerEdge 2900 with PERC6 / i controller. It originally had four drives of 500 GB in RAID 5 MFT, shared between the system and your data.  A year ago, I added a 500 GB drive and the extended partition of data. Now, the data partition becomes new so I would like to add another disk.  Since it is not a GPT disk (the BIOS does not start on a GPT disk) I can't extend the data beyond 2 TB partition but I can live with that by shuffling stuff around with a third partition.

  So I put in another disk of 500 GB and went through the same procedure I did the last time. Now, when I look at the virtual disk in the Dell Server Manager there it lists as Go 2 326,25 and if I select reconfigure it shows all six as physical disks part of the table.

  But in (Small Business Server 2008 Standard) disk management I see all the unallocated space. just a 125,65 GB system partition and a 1735,29 GB data partition.

  Where's my unallocated space?

  Windows does NOT recognize a greater - than - 2 TB disk without TPG - this isn't simply a limitation of the partition.

  At this point, there is no way to remove the disc from the matrix, so you'll have to do a backup/restore of a newly configured small table... or add an another disk (s) of the new and set up a new table (each table is seen by the operating system as a separate 'disc'), lose the availability of a disk, but spare the downtime and the headaches of a backup/restore.

• Query based ViewObject does pull not all attributes, when the query has 'WITH' clause

  Hello

  12.1.2 and 12.1.3 JDeveloper

  When we try to create a custom query based ViewObject, and the query clause of "with."

  So not all the columns selected in the query are appearing as attributes of the View object in the wizard.

  This is the query. And it performs very well in Toad.

  WITH dept_count AS)

  SELECT department_id, COUNT (*) AS dept_count

  Employees

  GROUP BY department_id)

  SELECT e.first_name AS employee_name,

  DC1.dept_count AS emp_dept_count,

  m.first_name AS manager_name,

  DC2.dept_count AS mgr_dept_count

  E employees,

  dept_count dc1,

  m employees,

  dept_count dc2

  WHERE e.department_id = dc1.department_id

  AND e.manager_id = m.employee_id

  AND m.department_id = dc2.department_id;

  Only the EmployeeName attribute is extracted from the query. It does not show the rest of the attributes in the VO Wizard.

  

  (I also tried to create a VO from the EntityObject class and make it editable as false, even in this case all attributes are not displayed.)

  I was wondering if something changed in 12 c?

  It works in 11.1.1.7

  (A friend of mine just asked me this).

  Thanks for any help.

  Sameer

  Jdev dislikes the syntax

  You can rewrite as

  SELECT e.first_name AS employee_name,

  DC1.dept_count AS emp_dept_count,

  m.first_name AS manager_name,

  DC2.dept_count AS mgr_dept_count

  E employees,

  (

  SELECT department_id, COUNT (*) AS dept_count

  Employees

  GROUP BY department_id) dc1,.

  m employees,

  (

  SELECT department_id, COUNT (*) AS dept_count

  Employees

  GROUP BY department_id) dc2

  WHERE e.department_id = dc1.department_id

  AND e.manager_id = m.employee_id

  AND m.department_id = dc2.department_id

  who must work and give you the same result.

  Timo

• Source Import Lightroom devices shows not all images on the card

  After importing images via the Lightroom Import Panel, I found that not all images on a card camera appear if "Source: devices" is selected.

  My camera creates a new image file (located in the DCIM folder) after 999 images taken by the camera. In this particular case, the images numbered _DSF0999. RAF and this is in the folder 110_Fuji and all that (for example, _DSF1000. RAF and above) is located in the 111_Fuji folder. However, Lightroom "Sources: Devices" (in this case, "Untitled") shows all the images in the second image file, 111 - Fuji. Only images in 110_Fuji are visible.

  
  

  "Copy all" is selected in the central part of the import Panel.

  The images are displayed if you select the card (in this case called "Untitled") in section "Files" from the dialog box import on the left side of the import Panel and check the box "include subfolders." It is not subfolders box or selection in the devices section of the import Panel, but rather a "eject after the entry" checkbox if the device is selected.

  Is this normal, or is there a way for all images on the card to be seen (and imported) through Sources: devices? Yet once, there is nothing like 'include subfolders' through Sources: devices, since it is in the section "Files" from the import Panel. Is there something that I am missing, or is this a bug? I looked through many books, google this deliverance, etc and I've not seen anything that addresses this issue. I usually just insert an SD card into a card reader and click on "import". The Lightroom import default settings of the control panel to the Sources: devices.

  Wadiest wrote:

  So, he was at least six months as this was reported and it has not been fixed or even recognized by Adobe? Awesome.

  This is the wrong forum. You can not "report" a bug to Adobe in this forum, and they don't recognize it in this forum.

  If you want to report a bug to Adobe and get a response, try here: http://feedback.photoshop.com/photoshop_family