Grouping of different MCU series

Similar Questions

• If compro el plan annual para todos los programas podre each tanto in e como mi mac pc? in spite of different equipos ser?

  If compro el plan annual para todos los programas podre each tanto in e como mi mac pc? in spite of different equipos ser?

  Hi Danielacfv,

  Yes, absolutely you would be able to use it on computers (PC and Mac).

  Like any creative cloud subscription is allowed to use on 2 computers (mac & windows), however you cannot use it at the same time.

• Supervisor, who belongs to a group of different companies

  Hello
  
  We have several business groups created. Can we have a supervisor who belongs to a group of employees and different companies under him are part of a group of different companies?
  
  Thank you
  KK

  Yes, you can.

  See the note below-
  How does the cross profile Option Business Group influence the Application [ID 224822.1]

  Please select the value for the profile HR: Cross Business Group accordingly.

  See you soon,.
  Vignesh

• can I use same address pool of policies and groups of different remote access VPN tunnel

  Hi all

  I want to create an access remote VPN in ASA different profile. IHAVE a RA vpn already configured to achieve a purpose.

  can I use the same ip address pool used to that existing for the new tunnel-group (to avoid adding rotuing on internal devices for new pool) and it is a temporary condition)

  Thanks in advance

  Shnail

  Yes, the local filtering on the SAA will be perfectly fine. My point of view with different pools is based on customer requests where later after some time, the requests came to distinguish the VPN-users group on servers and so on. For another client, I had to implement filtering on an internal firewall where the VPN gateway (which was out of our control) uses a de.100 pool-. 200. And it's a PITA, if the pools are not aligned on subnets.

  But anyway, your solution will work.

  Sent by Cisco Support technique iPad App

• Is it possible to have several buttons send grouped with different fields in the subforms on a single page?

  Hello world

  I have a form with two sections. Each section is a subform (the green boxes represent subforms in the screenshot) and each subform contains three required fields and a release button (the button submit to an e-mail address). The problem is that I can't seem to keep them separate. If I fill in the fields required in Subform1 and then click on the button 'Submit to regional HR', he took over the fields required in the subform 2. Is there a way to 'point' or 'group' these fields to each Submit button in their respective subforms?

  I can not be understanding the appropriate function or expects subform correctly. I learned designer of the life cycle on my own and with the help of this forum. Thank you very much for your help. -Chris

  

  I'm an amateur, but I decided to start helping as much as possible on these forums.

  I had a similar problem in the past and found a solution. I can't say with certainty that it is the best solution, but since each button has only 3 mandatory fields, it's a workable solution.

  So this is complicated but also somewhat simple solution that works. Please keep in mind my script experience is limited.

  For the first submit button allow the script to remain in its natural state. Make sure that your email presentation is correct. You will create a second button which will be a standard button. Change the text to be the same as the text for the first submit button. Within this button, the click event, puts a script like this.

  (

  If

  Required.Field.1.rawValue == null or

  Required.FIeld.2.rawValue == null or

  Required.FIeld.3.rawValue is nothing

  then

  xfa.host.messageBox = ("If you please fill all required fields")

  on the other

  Submit.Button.execEvent ("mouseUp")

  endif

  Repeat this step for the second button on the subform.

  now do the real hidden submit button and place the second button in its place. He will check the required fields have entered values and if they entered it will be then press the button to send real otherwise it will put in place the error message. This method requires that the mandatory fields are not marked as required by the value tab. They must be optional, if not built in scripts will interfere with the written order. This is a work around, but I found that it allows better control of the required fields. You can add a floating asterisk or perhaps a border coloured fields so that users are aware of what fields are mandatory.

  I really hope this helps. I know this can be confusing, but I understand that sometimes it can be difficult to get a response, so if I can be useful, I'll try.

• VCenter: User in several groups with different permissions, smaller approvals

  Hello

  We finally hit the use of our VCenter setup where we need to begin to use permissions group instead of the individual user's permissions.  I have set up several groups (QA, automation, App, VCenter users and administrators) for our users.  However - I ran into a problem where a user must be in QA Automation and administrators, and I put the appropriate permissions on a pool of resources (QA - unalterable, automation and administrators full control).

  When you connect as long as user is as VCenter uses by default the * least * permissions for the object being verified and the user has only read-only for the resource pool (and spread points).  Is this expected authorizations and vcenter behavior?  I guess the user must get the permissions for all the groups, they are in.

  Thank you

  Ben

  If you set permissions in vCenter level, then Yes, you need to uncheck spread it to child objects.  What you can do then is add permissions on each individual resource pool.

  Is the ultimate goal only allow these members to have access to resource pools, any VI?

• Grouping on different levels

  Hello
  
  Here is my structure:
  <>company
  < name > company #1 < / name >
  <>Agency
  Paris < ag_name > < / ag_name >
  < > 100 turnover < / turnover >
  < / Agency >
  <>Agency
  London < ag_name > < / ag_name >
  < > 250 turnover < / turnover >
  < / Agency >
  < / company >
  <>company
  < name > company #2 < / name >
  <>Agency
  Berlin < ag_name > < / ag_name >
  < > 100 turnover < / turnover >
  < / Agency >
  < / company >
  
  I don't want to display that data like this
  ________________________________
  Company 1. Paris: 100 k€ |
  | London: 250 k€ |
  ____________|___________________|
  Company 2 | Berlin 100 k€ |
  ____________|________________ __|
  Total | 450 k€ |
  
  
  I can't do it with the wizard, because it allows to work only a single node. By the classical way, all agencies are listed for all businesses (i.e., Berlin appears on the first line and Paris and London on the second).
  
  I searched for a way to do with the current - group (), but I did ' t do!
  
  Is there a solution for this?
  
  Thank you

  Take a look at this blog: http://blogs.oracle.com/xmlpublisher/2009/09/formatting_concatenated_dataso.html

  Thank you!

• All series on stacking MCU 5300

  Hello world

  As my topic above.

  I have several questions on stacking MCU 5300 series

  1. what type of series 5300 MCU only stackable? 5310 + 5310? or + 5310 5320? or + -5320 5320?

  2. If I cumulation 5320 + 5320 MCU, can I do conference call with 40 participants from HD in a room?

  3. How about the layout?

  4. What are the different between stacking and cascade MCU?

  Please advise,

  Thank you

  Ovindo Prastyo Utomo

  Hello Ovindo-

  For questions 1 and 2, you can take a look at this powerpoint which shows different stacking combinations for the 5300 series MCU and port capacity for each.

  Regarding the page layouts, the 5300 series follow the same layouts class microcontrollers such as the 4000 series and MSE 8510.  In the MCU 5300 Administrator's guide, it covers some of these layouts.

  The packing is just another word as reunification when compared with other microcontrollers, it allows you to join two or more microcontrollers (two can only be stacked/grouped in the 5300 MCU series).  Once on the other two microcontrollers are treated as a big MCU.

  Cascade, creates a link involved between two microcontrollers.  A MCU dials to the other as a participant and is treated as such in order to allow a larger participants to attend a conference of MCU another if one is at capacity.

  Hope this helps some.

• Binary read with one of the many possible definitions - or - how ot loop over different groups?

  Hi all

  I have a group of different data types that I save as a binary file and read it again at a later date with an another VI. I saved the definiton of cluster with a typedef, so I am sure that I use the same type of reading and writing.

  Now, I needed to change the cluster in the writing program should include another value. However, I still want to be able to use the VI of reading to read the old and new data files. I also have the opportunity to change the definition of binary file in the future (in VI writing) and be able to quickly adapt the VI to read the new definition while maintaining compatibility with the old.

  My plan was to have a typedef of the pole for each revision, say v1.ctl, v2.ctl, v3.ctl...

  Suppose I have a binary input file that has been saved using one of these typedefs but I don't know which. I now open the file and try to read its binary contents with each of my typedefs for data type and to stop once the reading of the binary VI gives no error. Then I would translate this cluster to the definition of cluster current version by wiring through existing values and assigning values of model / default for variables that are not on the binary file.

  My idea on how this could work is described here, with three versions of filetype:

  

  For each new version of filetype I would need a new business structure although the content of the business structures is almost identical.

  Because I save the file type definition version in my files, I could even simplify and use a separate case structure to update the data and fill in the dummy data:

  

  Now the error structures are completely identical, only their inputs differ by type. How can I work around this? How can I loop over the typedefs from different cluster effectively?

  I use LabView 2012 SP1.

  Since you already have a version of the cluster, just read this byte digital itself and then use a case structure date back to before the version and read the entire cluster based on whatever the version of the type definition read you.

• Tandberg MCU 5300 series supports the Conference me the feature?

  Hi all

  I would like to know that the 5300 Tandberg MCU series supports the Conference me the feature?

  We checked the 5320 MCU data sheet,

  Cisco TelePresence MCU 5320 CTI-5320-MCU-K9

  Comes with: 5320 - MCU and cables - MCU ports must be enabled with optional port licenses

  Software for Cisco TelePresence MCU 5320 license options

  1 nHD full HD/2 HD/4 SD/8 ports on 5320 MCU (max 10 with this option (6 used for nHD)) LIC-5300-4PL

  Second option Ethernet port (VFO) for the MCU 5320 LIC-5300-VFO

  AES and HTTPS option for the MCU 5320 LIC-AESMCU53-K9

  However, there is no information related to Conference me function.

  So, can we know everything that Tandberg MCU 5300 series supports the Conference me the feature?

  Best regards

  Ben

  Hi Ben,

  Conference is not compatible with the MCU 5300 series.

  Best regards

  Markus

  Sent by Cisco Support technique iPad App

• APEX 4.2 Radio Group NULL value behaves differently than on APEX 4.1.1

  DB version: 11.2.0.3 Linux
  APEX: 4.2
  APEX listener 1.1.4 on tomcat6
  Firefox 16.0.2
  
  Values NULL Radio Group behave differently than on APEX 4.1.1.
  4.2 creating radio group and selecting:
  Display Null value = Yes
  NULL, Display value = no value (or any string)
  NULL Return Value = (leave blank, for the NULL value returned)
  
  When the user selects that option 'No value', then APEX point value is set on "on", but on APEX 4.1, the element has the value NULL as expected.
  
  When you look at the Web page source code, the reason seems to be that APEX does not generate an attribute value for the NULL value (if the browser returns the default "on"):

  <input type="radio" id="P1_X_0" name="p_t01"  ><label for="P1_X_0">No value</label>

  Hi Ilmar,

  same thing here. The best solution I could come up with is to create a process to request again (before the calculation / validation)

  BEGIN
    FOR x IN (
         SELECT *
         FROM (
           SELECT item_name
           FROM apex_application_page_items aapi
           WHERE aapi.application_id = :app_id
           AND aapi.page_id = :app_page_id
           AND LOWER (aapi.lov_display_null) = 'yes'
           AND aapi.display_as_code='NATIVE_RADIOGROUP'
           AND aapi.lov_definition IS NOT NULL
           AND aapi.lov_null_value IS NULL
           AND ROWNUM > 0
      ) x
            WHERE LOWER (v (x.item_name)) = 'on'
    ) LOOP
      apex_util.set_session_state (x.item_name, NULL);
    END LOOP;
  END;
  

  Jens

• iRecruitment Site external candidate for different groups of companies

  Hello
  
  Is it possible to create several Sites of external candidates iRecruitment each linked to a group of different record companies?
  The client instance has 3 business groups.
  
  Is it possible to implement this standard / recommended?
  
  
  
  We have created three responsibilities of custom external candidates, each was to grant the set of permissions to the external candidate of IRC and IRC profile option: join Business Group has been set at the level of RESP. The guest user has only the responsibilities of the custom external candidate.
  
  
  Kind regards
  Buxant

  If you have 3 different "external pages" for the different BGs, then simply associate the BG record a different value for each external page.

  Concerning

  Tim

• Ringtone for group

  Hello how can I do a different ringtone for a contact group

  Sony z3 series is not possible, but some programs may set the tone for all the contacts in a group

• Two mcu 4205 cluster?

  Two mcu 4205 (4.4) with the same software both have 12 media port, now I have to make them work together as an mcu and 12 multimedia ports, have also the active guard and can be composed of devices or conferences by identification number, also I need if one of them is toward the bottom of the can function as main mcu and conferences continue

  How can I get there?

  Grouping/stacking of the MCU is not supported for 4200 series or 4500 to two MCU operate together as one.

  Clustering/stacking is supported only for the 5300 MCU series. You can only cluster/stack two units of the MCU.

  The idea of clustering/stacking the MCU is to increase capacity. The cluster will provide the sum of the capacities of the individual units. For example, if group you two microcontrollers that each supports 10 ports x 1080 p you supported a cluster which takes 20 ports x 1080 p.

  Optionally you can mount your two cascading 4205 microcontrollers:

  http://www.Cisco.com/c/en/us/support/docs/conferencing/Telepresence-MCU-4505/118763-config-MCU-00.html

  Another solution is that you need a Cisco conductor who works with VCS/CUCM.

  Take a look at these links for more information about deploying Cisco conductor:

  http://www.Cisco.com/c/en/us/products/collateral/conferencing/Telepresence-conductor/data_sheet_c78-709046.html?CacheMode=refresh

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/conductor/config_guide/XC3-0_docs/Telepresence-conductor-Cisco-VCs-B2BUA-deployment-guide-XC3-0.PDF

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/conductor/config_guide/XC3-0_docs/Telepresence-conductor-unified-cm-deployment-guide-XC3-0.PDF

  Kind regards

  Acevirgil

• Question on the addition of LUNS to the disk group

  The GI version: 11.2.0.3.0
  Platform: OEL
  
  I have to add 2 TB for the following disk group. Each logic unit number is 100 GB in size.
  
  100 x 20 GB is 2 terabytes. Which means that I have to run 20 orders as below
  

  SQL> ALTER DISKGROUP DATA_DG1 ADD DISK '/dev/sdc1' rebalance power 4;

  Each ALTER DISKGROUP... Rebalancing of the command Add DISK takes about 30 minutes to complete.
  Thus, this operation will take 10 hours to complete.

  ie. 20 x 30 = 600 minutes = 10 hours !!!

  I have a 3-node RAC. Can I run DISKGROUP ALTER... Orders of DISK to be added in parallel with each node? Will ASM instance allows
  several operations of rebalancing in a single disk group?

  http://docs.Oracle.com/CD/E11882_01/server.112/e18951/asmdiskgrps.htm

  Oracle ASM can rebalance of Group of disk at once on a given instance. If you launched balances multiple groups of different drives on a single node, Oracle then processes these operations simultaneously on additional nodes if necessary; otherwise, the rebalancing is performed in series on the single node. You can explicitly run balances on groups of different disks on different nodes at the same time.

  Why do you need to run 20 of these commands?

  You can not only add 20 records at one time:
  ALTER DISKGROUP DATADG ADD DISK
  "diska5/devices / ' NAME disk1.
  "diska6/devices / ' NAME disk2.
  "diska7/devices / ' NAME disk3.
  ...
  .. .etc

  You will need to should not manually rebalance as Oracle will automatically do the rebalancing when configuration changes unless you want to use a default value of such power as defined by the ASM_POWER_LIMIT parameter. You can run the command above with an option of rebalancing so if you you need to do.