Similar Questions

• compare two table with cluster inside

  Hello

  I want to compare two tables containing a cluster with several groups in it. When you use the equal the result is the same pattern as the cluster of entry. But I just need a true or false. It doesn't bother me that it changed on position 1 or any other position.

  Is there an elegant way to do it?

  Thanks for any help.

  Yves

  Right-click equality and change to compare aggregations. That, or add a table and later.

  /Y

• TMS select only MCU, when two MCU are available

  Hi all

  I have two microcontrollers, one for US sites and the other for sites in the United Kingdom. Both are configured in TMS will host multi point Conference. During the planning of videoconference, TMS always select the MCU UK. Even points to end at the US site. I have observed MSDS id is 5 for UK MCU and MSDS ID is 12 for us MCU.

  Let me know, what are the settings that I need to check in MCU and TMS?

  How to check on TMS and MCU intellectual property areas?

  Thanks in advance!

  Kind regards

  Siva

  Take a read through the TMS Admin doc, in particular chapter of routing:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/admin_gu...

  Sent by Cisco Support technique iPad App

• Cannot configure a two-node MSCS cluster.

  Server configuration iSCSI by Starwind 5.4 on Win7 and Win two, 2003 virtual machines as nodes in cluster on vSphere 4.0. Using Starwind how to configure the Quorum and another disk shared between 2 virtual machines. The path that is on each virtual machine by the Microsoft iSCSI initiator to get both drives shared directly from iSCSI Server (win 7).  When configure a cluster on a node, download info on photo 1, check the yellow error, got the image 2. At the end of the installation, download the info from the error: the network path is not found (photo 3), check the logs of the Win system, download the info on photo 4. Before and after her, with check the 3 NICs IP network and ping them, all of them are good. After putting new IP Address/subnet mask on the network cards that are for the beats, the problem is still there.

  I'm confused what is wrong. Is it a problem that the pulse line connects via a vSwitch without physical NETWORK card as Microsoft says heart rate must be connected directly?

  I don't think it would be a network ESX problem since all your NETWORK cards are online and respond to pings.   I am curious about your first screen printing where the cluster cannot be brought online due to the INVESTIGATION period is already on the network.   Is it possible that the IP address is in use elsewhere on the network?

  I'll move this thread to the VM forum and the guest operating system to see if anyone can help troubleshoot the configuration of comments.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Replication Failover clustering & Hyper-v on a two-node cluster

  Hello

  We have two identical servers.  One to use as a main server, which houses two virtual machines.  The other should be used as a back up in case the main server is not somehow.  We planned on using a solution of third-party software to back up our virtual machines and launch them in the event of failure of the principal server.  However, we discovered just gave the failover clustering in Windows Server R2 2012.

  We have tried to set up a cluster 2 nodes, with our virtual machines properly replicated to the backup server.  Excited by the present, we tried then to simulate failure of the primary server (by pulling on the cable network).  We were a little disappointed to find that the backup server is not automatically run virtual machines.  We did a survey and read than a solution of two nodes requires storage space for additional network (in addition to our two servers).

  I wonder if that's okay?  In other words, a two-node failover cluster requires separate network storage space.  If this is not correct, can someone point me to a set of instructions to correctly configure a two-node failover cluster that will automatically launch the virtual machines on the server backup (in the case of a failure of the principal server).

  Thank you

  Mike Goldweber

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• VCS Cluster - record H.323

  Hi all

  We have a VS Cluster and would like to register 2 MCU´s and a gateway with H.323 on it.

  -Inscription on the first not peer very well - no prob. record of 2. Peer - does not (source unauthenticated received fron)

  VCS Trace... no this crypto token / / invalid cryptographic tokens.

  Its allways happened on 2. peer.

  Restart the MCU, restart Cluster, see time servers, disabling / enabling H.323 in VCS and MCU - all done, always the same failure.

  VCS Cluster / MCU / ISDN are all in the same subnet, but in another location. RTD between the location is less than 10 ms.

  BTW: SIP with tls runs without any risks.

  Does anyone have an idea?

  Thank you much for your helping hands

  /Dirk

  In general this should not happen.

  You said you checked the time servers, but have you also checked the actual time on the

  VCS and the endpoint? (for example the login as root and check with the date).

  Try to use the same NTP server on all VCS and endpoints.

  Is the group itself ok (see configuration / clustering)?

  Something not ok with the zone configurations?

  You have any local specific or server based CPLs on VCS?

  No matter what firewall/nat/alg between VCS and the endpoint?

  Do you have a xconfig on two VCS and compare the config of the differences?

  Your sure it's the right vcs you hit?

  Do you still review log files and compare what's happening the first relative to each other?

  A tcpdump and check on the VCS of debugging can be interesting as well.

  Please remember useful frequency responses and identify useful or correct answers.

• 2 microcontrollers in cluster with redundancy

  Hello

  I went thorugh some messages on this forum.

  and it turns out that it is impossible to have redundancy when two microcontrollers in same cluster if we conductor.

  But just in case, I want to discuss once more.

  Make the duplex-MCUs(when master failed during the calls, slave gets calls),

  What can we do?

  Suppose you have two MCU 5320, a conductor.

  Van

  Best wishes

  Paul.

  When clustering MCUs and a failure occurs:

  • If it fails, it will be the slave, the slave being related to the master.
  • case of failure of the slave, the master will always be online and running, but without the additional capacity of the slave.

  If you want a full redundancy, you will need to run two microcontrollers independently from each other and use a driver.  You will not get the functionality of additional for each MCU capacity because they are not grouped, but you get resilience.

  As you said there are several other discussions on this topic.

• Grouping of different MCU series

  I have a client with and old and a new microcontroller, he would like to cluster two of them to have ports up.

  MCU OLD: 4510 Version: s4.1 (1.51)

  New MCU: 5320 Version 4.4

  Under the new version 4.5, its supports two MCU.

  My questions:

  1.) if I spend two MCUS at the same version, I can their cluster.

  2.) if I don't pass the OLD MCU, is there anyway I can their cluster.

  Also don't I have to have a key cluster support to make it work.

  Thank you.

  It is not possible to combine different MCU models, all microcontrollers must be the same model to be clustered, the only exception to this is, this is the where you can group different of the MCU 5000 series models. Everything simply because the software MCU supports clusters, means that the material is, check out the specific model of MCU to see if it supports clusters. Grouping microcontrollers require a key option, however with the MCU 5000 series it requires a stacking cable, if media MCU clustering refers to its deployment guides on how to create a cluster.

• SFR in license cluster mode?

  If I run two ASAs in cluster mode, is there a special setting that I need to do on the modules of sfr?

  The pair of cluster ASAs forwards traffic to the two modules of sfr?

  Documentation is very vague on the subject of sourcefire, clustering, everything he says really is to "maintain a coherent policy on the modules of sfr and do not use areas during your period.

  Are there additional licenses required? IE I have control of x 2 + protect however only 1 AMP / URL license

  Does this mean that only SFR modules can process the malware and URL filtering?

  Any help would be greatly appreciated

  Thank you

  Are you running the ASAs in a pair of Active-Standby HA with module of firepower on each of them?

  If so, the licensing of the modules must match each module. Otherwise, you will not be able to appply URL filtering and policy file (AMP) on one of the modules.

  If the ASAs are truly in a cluster 2 nodes (not active-Standby) so it is even more important that licenses match because only by flow of traffic can take another Member as a transfer device.

  Ideally simply build you a set of policies in the Management Center FireSIGHT and apply them to two modules of firepower.

• Automatic standard MCU

  Hello

  I have two Codian MCU. A 4510 and a 4210. Currently I have my E Expressway pointed toward the auto attendant 4210, but want to show available on the MCU 4510 meetings as well.

  Is this possible?

  Thanks in advance

  Cam

  Hello Cam-

  It is not possible to link the two MCU auto attendants, as they are separated and free in their own MCU.

• C90 w/4210/5320 MCU H.239 Frame Rate

  I admit the departure, it's "H.239 101" type question, but our environment is transitional on very old rooms of 4:3 which were never designed to manage content on separate screens so I'm just now my hands dirty with the intended user, experience sharing content.

  My question is around H.239 - cadence for C90 endpoints as well as MCU-4210/5320...on the surface, it seems that they are able to share plenty of movement, full-video cadence in the H.239 channel, right? must be able to handle 720 p, 30 frames per second?

  In tests, I connected a C90 to two MCU to the relatively high rate of calls (1.5 MB, 2,0 MB) and when I check stats, H.239 channel turns to the expected bitrate and resolution-but very low frequency of frames... between 4/7 frames per second

  I think I am missing some setting commonly or game setting between the endpoint and MCU.

  In addition to setting minimum outflow for the content on the MCU, what other effects H.239 - cadence? I tried to play with the settings of weight main/presentation in the C90, but does not appear to affect the results.

  Thanks in advance for any response

  Take a look at this discussion, cisco-mse-8510-content-frame-rate-and-resolution-limitations.  In short, the cadence of the content that is being received and sent by the MCU are dependent on how you have the quality that is configured for the endpoint PC Input, that is to say: (default) sharpness or movement.  There is no middle ground, or dynamic parameters, it's one of those two.

• Problem with Oracle fail safe 4.1.1 on W2k8 R2 Cluster Failover and Oracle 11.2.0.4 database

  Hi all

  I'm doing some tests on a Windows 2008 (64-bit) R2 two-node failover Cluster.

  I installed and configured successfully bone and the Failover Cluster feature.

  So I followed Oracle Doc-ID 1916391.1 to perform the installation and configuration of Oracle 11.2.0.4 database and Oracle Fail Safe 4.1.1

  After a successful (via Fail Safe Manager) validation of cluster and group, now I'm trying to validate the stand-alone database, but I'm stuck with this error (output in verbose mode of PowerShell):

  PS C:\Users\demo > Test-OracleClusterAvailableDatabase TESTDB - SysPwd (Read-Host-AsSecureString-Prompt "SYS Password ')-verbose

  SYS password: *.

  DETAILES: FS-10915: NODE1: from verification of autonomous resources TESTDB

  DETAILES: FS-10371: NODE1: run the initialization processing

  DETAILES: FS-10371: NODE2: run the initialization processing

  DETAILES: FS-10372: NODE1: resource owner information collection

  DETAILES: FS-10372: NODE2: resource owner information collection

  DETAILES: FS-10373: NODE1: determine the owner of the TESTDB resource node

  DETAILES: FS-10374: NODE1: collection of cluster information required to perform the specified operation

  DETAILES: FS-10374: NODE2: collection of cluster information required to perform the specified operation

  DETAILES: FS-10375: NODE1: analysis of the cluster information required to perform the specified operation

  DETAILES: FS-10378: NODE1: preparation for the configuration of resource TESTDB

  TH: FS-10349: database TESTDB instance is not alive. You want to stop and restart the database instance?

  Confirmation

  Operation does?

  Running dell' operation sulla "Test-OracleClusterAvailableDatabase' likelihood 'TESTDB '.

  [S] Sì Sì [T] a [N] no [U] tutti a tutti [O] Sospendi [?] Guida (he valore predefinito e "S"):

  DETAILES: FS-10350: from the TESTDB database

  Test-OracleClusterAvailableDatabase: OCIEnvNlsCreate failed

  
  

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10999: an internal programming error

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10160: impossible to verify the Oracle of standalone TESTDB database

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10818: provider of resources of the database Oracle failed in preparing for

  treatment for TESTDB resource configuration

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10890: Oracle Services for MSCS failed during the verifyStandalone operation

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Attached is the log of the OFS Cluster Dump (no error in my opinion).

  I surfed around but I can't find anything to solve the problem.

  I think something about the language of the (Italian) OS and Oracle NLS settings (AMERICAN. AMERICA), but obviolsly I'm not sure about this.

  Thanks in advance for any suggestion,

  Alessandro

  Message modificato da 1d457339-524e-4aa5-94aa-fd7d1ae98732 updated: attached is also output trace of the fss.

  Hello Alessandro.

  Solution to the issue is:

  Patch 20744940: 4.1.1.1: ORACLE FAIL SAFE VERSION 4.1.1 PATCH SET 1

• Configure a cluster of vsphere with 2 host with internal storage shared via HP LeftHand - doubts

  Hi, I'm trying to create a two-node esxi cluster. These nodes will share their internal storage with HP Lefthand Appliance (HP StoreVirtual VSA). I need the first steps to create the cluster, or better, the macro blocks, IE:

  -install esxi on each node
  -install Virtual Center and create the vmware cluster

  -Deploy the VM VSA...

  I have a lot of doubts because of the reason why I can't have (installation of the HP guide said) virtual machines on other than the VM VSA itself VSA data store. How can I configure things? Creating first two warehouses of data, deploy VCenter on a data store, create the cluster, deploy VSA VM on the other data store...

  Can you help me please?

  DL380G5 host as the location for the ODM is ok, but you may need to upgrade the host in any case since v12 FOM requires ESXi 5.0 or newer.

  ... what happens if the update fails and the hypervisor does not start more?

  I know we can't answer a question with a question. Anyway, how do save you virtual machines on this host now?

  It is true that the VSA VM cannot be migrated, but I can migrate the VCenter to a to another data store when I will have created the DATA of VSA data store (one that the hypervisor consider as an iSCSI target), I'm good?

  I'm sure that it is correct. Unless I'm missing something, vCenter Server is just another virtual machine running on the cluster VSA VSA does not require vCenter Server to run.

  André

• Difficulty understanding the HA Cluster

  Hello

  can someone please explain to me why my vm HA cluster is not turn on/off?

  I have 2 guests clustered HA:

  Esx1.company.pri

  Processor clocked at 3395 x 2

  4 095 MB RAM (1287 used for esxi)

  ESX3.company.pri

  Processor clocked at 3395 x 2

  4 095 MB RAM (1287 used for esxi)

  TestCluster is configured as follows:

  Host failures tolerates the cluster = 1

  Enable: Ban the vm power on operations that violate constraints of availability

  No DRS

  I have 3 vm:

  Ubuntu01 1800 MB RAM, 1200 MB booking, no reservation of CPU

  Centos7-01-512 MB of RAM, 300 MB booking, no reservation of CPU

  Centos7-02 512 MB of RAM, 300 MB booking, no reservation of CPU

  I am using vCenter 5.5 and 5.5 esxi

  Whenever I start Ubuntu01 I get the error: "insufficient resources to meet the failover configured for vSphere HA.

  When I change Ubuntu01 to RAM of 1200 MB to 1000 MB, I can start to Ubuntu01, but after that I can't start Centos7-01.

  Can someone please explain to me why it does not work?

  A two hosts HA cluster with admission control by default settings, and only 4 GB of memory is not real good environment for the test. In any case, a host in a HA cluster requires a minimum of about 2.4 GB of memory, which may explain why there is only one location of 1 032 GB available for each host.

  André

• A point of view composer for 2 HA/DRS-Cluster or 2 data centers?

  Hey,.

  I have a question of design, on a separate installed View Composer.

  Is it possible to use a view of the Horizon with a vCenter and a View Composer environment, so that I can create view in desktop computers

  (a) two different ESXi Cluster in the same data center?

  (b) two ESXi-Cluster different, who are in their own dedicated data center?

  It would be nice to get a useful response.

  Best regards

  André

  Hello Andrew

  It is possible to deploy desktop computers view in two different groups in the same ms as well as two different groups under different domain controllers. However, where are deployed clones full and linked clone depends on where the image of the mother or the model is present. If the view desktop computers that are in the same pool will be deployed where the master image is present.