Groups & redundant index
First of all, I read the Cisco Content Services Switch redundancy Configuration Guide for version 7.40 and version 8.10. I am active-backup VIP and Virtual Interface redundancy configuration. I like Cisco documentation, but sometimes I can not just to wrap my brain around their examples. In my case, they are simply too simplistic; In addition, I have a few unanswered questions:
1. what happens if I do not create an "essential service"? Will be my redundant services and content still rules maintain flows if my assets goes down?
2. do I need to source in order for the ASR groups function properly? My stand-alone configuration uses them, and I'd rather not add them if they are not necessary (Cisco docs aren't clear on the need).
3. is there a meaning to the #s what to choose for "redundant-index? They must just be different for each rule of service/content, correct?
Thank you - I appreciate the comments (I'm still waiting for an engineer Cisco sent me a configuration of redundant balancer with several personalities...)
1 critique service: is used to detect a failure in the respectable which should lead to the (failover) failue of the css. So it is an option. most of the time, it is also used for the sharing of fate: two virtual routers (client/server side) use the same critical service
2 source groups are used for nat - ing are not necessary for the asr, but if you have them in the normal design u should make redundant
3 redundant-index: there is not matter
Tip: do not forget global portmap
Tags: Cisco DataCenter
Similar Questions
-
Using of "get the N first lines only" does / * + FIRST_ROWS ([N]) * / redundant index?
I know FIRST_ROWS indicator shows the optimizer to minimize the time of the first row. I know that the new feature of 12 c for "fetch [FIRST |]» [NEXT] [N] LINES [ONLY |] WITH LINKS] "get first/next N lines only / with ties" will implement the query using ROW_NUMBER(). Should I leave hint in case it improves performance, or the clause FETCH FIRST made this redundant suspicion?
Hi Wes and Hoek,
Oracle said on the indicators in the 12 c setting guide. Each version of this statement becomes stronger.
The disadvantage of the advice is additional code that you must manage, audit and control. Tips have been introduced in Oracle7, when users have little recourse if the optimizer generated suboptimal plans. Because changes in the database and host environment can make obsolete tips or negative consequences, it is a good practice to test the use of indicators, but use other techniques to manage the execution plans.
Oracle provides several tools, including how to set up SQL, SQL plan management and SQL Performance Analyzer to solve performance problems unresolved by the optimizer. Oracle strongly recommends that you use these tools instead of advice because they provide new solutions like the change of environment data and database.
Oracle presents advice in V7, basically as an admission that its optimizer based on CSSTidy based cost did not get things right all the time and tried to get rid of them since. In addition, the preferred method of setting when you are browsing the major updates was to review advice to remove them. It will be interesting to what extent can it be pushed in V12.
In what concerns the first lines index and ROWNUM limiting, unless you just try to get the garbage data, it's meaningless without the presence of an ORDER BY. Once you have an ORDER BY, the query must retrieve all the data before it can return anything. The exception to this rule is if there is an index that the database can use to retrieve already ordered data, that is to say on the order of columns. Therefore, the essence of the indication of FIRST LINES. It will be aggressive looking in the index in favor if the index is in line with the order of. (Try the setting of a SIEBEL instance if you need proof)
I don't have a 12 c to test at the moment, but looking at the examples of Martin, it appears the optimizer is aware of the new windowing function in the new FETCH FIRST/NEXT structure and selects a plan that gives the best answer. If you go through the effort to review suggested rownum limited requests to remove the tips if possible, maybe you should just rewrite with new windowing function.
Concerning
André
-
Triple mirrored in normal redundancy
Hello
I noticed that my controlfile and backup controlfile are triple mirror is the diskgroup redundancy is not normal. Measure map also shows each extension is three times in the opposite direction, the third issue of the disc shows also some waves as 65534, please let me know what does this mean.
GROUP_NUMBER NAME TYPE ------------ ------------------------------ ------
1 DATA2 NORMAL ASMCMD > ls-l
Name of type Redund time scratched Sys
CONTROLFILE HIGH END SEP 20 16:00 Y Backup.260.858787529
CONTROLFILE HIGH FINE 11 OCT 16:00 Y current.256.858786763
Virtual Allocation unit physical measurement Disc -------------- --------------- --------------- ----------
0 0 265 0 0 1 364 2 0 2 4294967294 65534 1 3 365 2 1 4 266 0 1 5 4294967294 65534 Thanks in advance for your time
There is fault of mirroring the standard for each file created in the diskgroup regardless of the disk group redundancy
For more information, see http://docs.oracle.com/cd/B28359_01/server.111/b31107/asmfiles.htm#OSTMG94194
I hope that answers your question
-
Difference between ADVM Volume and filesystem ACFS ASM disk group
Q1. What is the difference between an ASM disk group and a Volume of ADVM?
In my opinion, an ASM disk group is actually a logical volume to the database (including the FRA files) files.
11 GR 2 appears to have introduced the notions of volumes ADVM and filesystems ACFS.
11 GR 2 ASM disk group can contain:
- ASM disks
- Volumes ADVM
- Filesystems ACFS
Q2. ADVM volumes appear to be dynamic volumes.
However is it therefore not effectively overlaying a logical volume (the volume ADVM) under ASM disk group (conceptually a logical volume as well)?
Even worse, if you left the ASM disk group redundancy in hardware RAID / SAN level (as recommended Oracle), you actually have 3 layers of logical disk? (ASM on top of ADVM on top of RAID/SAN)?
Q3. If it is 2 layers of logical disk (i.e. on top of ADVM ASM), what makes this better than 2 layers using a 3rd party volume manager (for example the DSO at the top of the 3rd party LVM) - something Oracle encourages against?
Q4. ACFS file systems, seem to be file systems clustered for not including ORACLE_HOMEs database files, application exe etc (but NOT GRID_HOME, OS root, OCR or voting records)
Can you create / modify filesystems ACFS using ASM.
The diagram of topology of oracle for ASM in ASM 11 GR 2 administration guide, says ACF in ASM. I'm not sure about that if ACFS belongs to ASM or ASM is located at the top of the ACF?
Q5. Connected to the 4th quarter. There seems to be a number of different ways, ACFS file systems can be created? Which of this is the valid methods?
- Thanks to ASM?
- through native OS file system creation?
- through OEM?
- through acfsutil?
my head explodes
Any help and clarification appreciated
Jim
Q1 - volume ADVM is a type of special file created at the DG of the DSO. Once created, it creates a block device on the BONE itself which can be used as any other block device. http://docs.Oracle.com/CD/E16655_01/server.121/e17612/asmfilesystem.htm#OSTMG30000
Q2 - the asm disk group is a group of disks, not really a logical volume. It combines the attributes of both when it is used for purposes of database as the database and some other applications know how to talk about Protocol 'ASM '. However, you won't find all the versatile applications that can do. In addition, some clients prefer to deal directly with files and devices of volume systems which ADVM is forced to make. In your thinking, you have 3 layers of logical disk, but each of them provides features and different attributes. This is not a bad thing, though, as each has a slightly different purpose - os file system\device, specific database and storage-centric.
Q3 - ADVM is specifically developed to extend the features of the DSO for use by General applications of BONE. It includes the performance of database features and is tuned to work well in this situation. Because it is developed in-house, it benefits from the design of ASM model. In addition, rather than having to communicate with several vendors for support, your support is limited to calling Oracle, a single window.
Q4 - you can create and modify filesystems ACFS by using command line tools and the ASMCA. Creation and modification of logical volumes coming through SQL (ASM), asmcmd and ASMCA. EM can also be used for the two elements. ACFS is located at the top of the ADVM, which is a file in an ASM disk group. ACFS is aware of the characteristics of the ASM\ADVM volumes and tunes it's IO make best use of these features.
Q5 - several ways:
1) connect to ASM with SQL, use 'alter diskgroup add volume' as Mihael points out. This creates an ADVM volume. Then, put in shape volume using the "mkfs" (* nix) or acfsformat (windows).
(2) use ASMCA - a GUI to create volume and a file system. Probably the easiest if your head is explosion.
(3) use "asmcmd" to create a volume and 'mkfs' to put in shape file ACFS system.
Here is information on the ASMCA, with examples:
http://docs.Oracle.com/CD/E16655_01/server.121/e17612/asmca_acfs.htm#OSTMG94348
Information about the command line tools, with examples:
-
JavaScript to determine the color of background/outline named pathItem [index]?
I'm looking to build a control upstream of sorts for my Illustrator workflow (because for some reason... upstream in illustrator does not exist...).
Essentially, I need to loop through the pathItems on each work plan looking for a specific spot color (first check that the task of color does NOT exist as a fill color in one of the work, then check for any pathItem that contains the task of color such as a stroke).
This seemed to be a very simple task, but it seems that pathItems.fillColor or pathItems.strokeColor is not a valid property? Which confuses me because she works to apply a color to a pathItem... It seems to me that if you can apply a color via pathItems.fillColor, you should also be able to create an if clause that determines if pathItems.fillColor is (regardless of color). However, test it in the simplest of documents in which I know what the result of the if clause should be, it does not work. is there something I'm missing here on the fillColor/strokeColor property?
Here's the code I'm working with. Thank you, all.
#target Illustrator var docRef = app.activeDocument; var aB = docRef.artboards; var swatchList = docRef.swatches; var tC = swatchList.getByName("Thru-cut"); var tCCount = 0; //how many artboards/top level groups contain at least 1 Thru-cut stroke? var artLayers = docRef.layers; var groups = artLayers[0].groupItems; var aBtCCount = 0; // how many artboards have var aBnoTC = []; // which artboards/top level groups (by index) do not contain at least 1 Thru-cut stroke? for (a = 0; a < aB.length; a++){ aBtCCount = 0 var items = groups[a].pathItems; for (b = 0; b < items.length; b ++){ if (items[b].fillColor == swatchList.getByName("Thru-cut")){ alert("You have Thru-cut fills in your document!!"); break; } //end if // thru-cut is fill else if (items[b].strokeColor == swatchList.getByName("Thru-cut")){ tCCount++; break; } //end if // thru-cut is stroke else{ tCCount = 0; } //end else // set counter to 0 }//end for loop B // checking items on each artboard if(tCCount == 0){ aBnoTC.push(" " + a); }//end if // artboard has no cut line else{ aBtCCount++; }//end else // add to counter for total artboards w/ thru-cut alert(tCCount); }//end for loop A if (aBtCCount < aB.length){ alert("Artboard/s " + aBnoTC + " are missing Thru-cut lines"); }//end if // not enough cut linesAccess to the task of color by color background or outline of a path element when it is a spot color is just a little bit more complicated, you've got to go pathItem.fillColor.spot.name.
To see if an undesirable color is found in the document, you can use a more effective method by analyzing the InkList of the document - it has the information you see in the print output dialog box.
alert (document.inkList) will show you the collection of ink plates. -
Error using nested for each activity group transform Oracle SOA 11 g
I posted this problem in XML general forum section. I don't know if it was in the right place because the error occurs in a BPEL.
Thank you for taking the time to post this thread.
I created a XSLT transformation that runs on oxygen, but does not work in a SOA transformation activity.
Given this XML-
< country >
< info enum = "CTRY" name = 'United States' States-total = "50" / >
< enum = 'ST' index info = '0' sname = "New York" population = "8 244 910" / >
< enum = 'ST' index info = '0' sname = "Chicago" population = "2 707 120" / >
< info enum = "CTRY" name = 'Germany' States-total = "16" / >
< enum = 'ST' index info = '1' sname = population "Berlin" = "3 469 910" / >
< enum = 'ST' index info = '1' sname = population "Brandenburg" = "2 500 000" / >
< / country >
Work of XSLT in the oxygen-
< xsl: template match = "/" >
< country >
[< xsl: for each group-select = "" countries / * ' group-starting-with="info[@enum='CTRY"] ">"
< CountryInfo >
< xsl: Call-template name = "ctry" / >
< / CountryInfo >
< / xsl: for each group->
< / country >
< / xsl: template >
< xsl: template name = "ctry" >
< name > country: < xsl: value-of select="@name"/ > < / name >
districts of <>< xsl: value-of select="@total-states"/ > < / districts >
< xsl: for each group-select = "current - group ()" group-by="@index" >
< xsl: Call-template name = "States" / >
< / xsl: for each group->
< / xsl: template >
< xsl: template name = "States" >
< name of xsl: variable = "index" select="@index"/ >
States <>
< xsl: for each select = "current - group ()" >
< name >
< xsl: value-of select="@sname"/ >
< / name >
< / xsl: foreach >
< / states >
< / xsl: template >
I get the desired oxygen - result
< country >
< CountryInfo >
< name > country: United States of America < / name >
< > 50 districts < / districts >
States <>
< name > New York < / name >
< name > Chicago < / name >
< / states >
< / CountryInfo >
< CountryInfo >
< name > country: Germany < / name >
< > 16 districts < / districts >
States <>
< name > Berlin < / name >
Brandenburg < name > < / name >
< / states >
< / CountryInfo >
< / country >
In a transformation of Oracle, I get an error "cannot perform XPath expression. I have narrowed down the cause of the error. The error is caused by
the nested for each group - using 'current - group ()' and 'group-by=@index '.
< xsl: for each group-select = "current - group ()" group-by="@index" >
< xsl: Call-template name = "States" / >
< / xsl: for each group->
Oracle does not throw an error if I use ' Country/info' instead of ' current - group () or group-starting-with, but this does not produce the desired result.
because he needs to be grouped by "@index."
Does anyone know why the Oracle processing activity is not able to use the nested < xsl: for each group-select = "current - group ()" group-by="@index" >?This error has been fixed by modifying
It seems that the XSLT for Oracle parser does not correctly XSLT 2.0. This is understandable since in 11g does not have full support for XSLT 2.0.
-
Error using nested for each group - in Oracle XSLT
Hello everyone. Thank you for taking the time to post this thread.
I created a XSLT transformation that runs on oxygen, but does not work in Oracle.
Given this XML-
< country >
< info enum = "CTRY" name = 'United States' States-total = "50" / >
< enum = 'ST' index info = '0' sname = "New York" population = "8 244 910" / >
< enum = 'ST' index info = '0' sname = "Chicago" population = "2 707 120" / >
< info enum = "CTRY" name = 'Germany' States-total = "16" / >
< enum = 'ST' index info = '1' sname = population "Berlin" = "3 469 910" / >
< enum = 'ST' index info = '1' sname = population "Brandenburg" = "2 500 000" / >
< / country >
Work of XSLT in the oxygen-
< xsl: template match = "/" >
< country >
[< xsl: for each group-select = "" countries / * ' group-starting-with="info[@enum='CTRY"] ">"
< CountryInfo >
< xsl: Call-template name = "ctry" / >
< / CountryInfo >
< / xsl: for each group->
< / country >
< / xsl: template >
< xsl: template name = "ctry" >
< name > country: < xsl: value-of select="@name"/ > < / name >
districts of <>< xsl: value-of select="@total-states"/ > < / districts >
< xsl: for each group-select = "current - group ()" group-by="@index" >
< xsl: Call-template name = "States" / >
< / xsl: for each group->
< / xsl: template >
< xsl: template name = "States" >
< name of xsl: variable = "index" select="@index"/ >
States <>
< xsl: for each select = "current - group ()" >
< name >
< xsl: value-of select="@sname"/ >
< / name >
< / xsl: foreach >
< / states >
< / xsl: template >
I get the desired oxygen - result
< country >
< CountryInfo >
< name > country: United States of America < / name >
< > 50 districts < / districts >
States <>
< name > New York < / name >
< name > Chicago < / name >
< / states >
< / CountryInfo >
< CountryInfo >
< name > country: Germany < / name >
< > 16 districts < / districts >
States <>
< name > Berlin < / name >
Brandenburg < name > < / name >
< / states >
< / CountryInfo >
< / country >
In a transformation of Oracle, I get an error "cannot perform XPath expression. I have narrowed down the cause of the error. The error is caused by
the nested for each group - using 'current - group ().'
< xsl: for each group-select = "current - group ()" group-by="@index" >
< xsl: Call-template name = "States" / >
< / xsl: for each group->
Oracle does not throw an error if I use ' Country/info' instead of 'current - group ()', but this does not produce the desired result
because he needs to be grouped by "@index."
Does anyone know why my XSLT does not work in a transformation from Oracle?oracleistheway wrote:
Does anyone know why my XSLT does not work in a transformation from Oracle?What do you mean by "transform Oracle?
If you are referring to the integrated database XSLT processor available through XMLTransform or DBMS_XSLProcessor API, it does not support XSLT 2.0, 1.0 only.
If you use the XDK Java (oracle.xml.parser.v2) Please give the exact version.
-
360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours
My x 360 spectrum stops to get into sleep after a few hours of normal behavior. In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period. It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours. It stops working after the computer has been for a few hours. I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system. Once the problem occurs, the computer turns off the screen but that's it. He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.
I watched powercfg /requests and there is nothing listed that could prevent sleep. I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.
NOTE: The energy report is also EVEN if the system still works correctly.
I could use help to determine what is the cause of this condition.
Thank you. See below for diagnostic information:
Here is the result of the /requests powercfg command:
C:\Windows\System32>Powercfg /requests
DISPLAY:
None.
SYSTEM:
None.
AWAYMODE:
None.
PERFORMANCE:
None.
PERFBOOST:
None.Here is a release of energy report (Note: site Forum HP changed the HTML code):
Power efficiency Diagnostics report
X 360 computer name
Analysis time 2016-01 - 06 T 15: 16:32Z
Scan duration 60 seconds
System manufacturer Hewlett-Packard
Product system name HP spectrum x 360 Convertible 13
Date of the BIOS 10/23/2015
Version of the BIOS F.2D
Build OS 9600
PlatformRoleMobile platform
Plugged In true
Number of processes 164
Contexture 1892
Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
Results of the analysisErrors
Suspension device: USB get USB selective suspend
This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
Name of device Microsoft mouse and driver detection keyboard (USB)
Host controller ID PCI VEN_8086 & DEV_9CB1
Host controller location PCI bus 0, device 20, function 0
Device ID USB\VID_045E & PID_0745
1 port wayCPU utilization
rocessor use is high
The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
Average use (%) 11.12
Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.Device drivers:
Devices with missing or misconfigured drivers can increase energy consumption.
Card device name Cisco Systems VPN for Windows 64-bit
Device ID ROOT\NET\0000
State of the device 0 x 1802401
Code 0 x 16 device problemCaveats
Platform timer resolution
latform Timer resolution
Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
Current resolution of the clock (100ns units) 10007
Maximum Timer (100ns units) 156250
Platform timer resolution
utstanding Timer request
A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
Requested period 10000
Asking to process ID 11968
Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name chrome.exe
PID 8464
Average use (%) 1.09
Module Module average use (%)
\Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
0.48
\SystemRoot\system32\ntoskrnl.exe 0.00
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name chrome.exe
PID 1360
Average use (%) 1.09
Module Module average use (%)
\Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
0.47
\SystemRoot\system32\ntoskrnl.exe 0.01
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name chrome.exe
PID 9788
Average use (%) 1.08
Module Module average use (%)
\Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
0.47
\SystemRoot\system32\ntoskrnl.exe 0.00
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name HPSF.exe
PID 11968
Average use (%) 0.71
Module Module average use (%)
\SystemRoot\system32\ntoskrnl.exe 0,14
\SystemRoot\System32\win32k.sys 0.10
\Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name netsession_win.exe
PID 5828
Average use (%) 0.67
Module Module average use (%)
\SystemRoot\system32\ntoskrnl.exe 0.42
\SystemRoot\system32\drivers\ndis.sys 0.10
\Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name chrome.exe
PID 5712
Average use (%) 0.63
Module Module average use (%)
\Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
\SystemRoot\system32\ntoskrnl.exe 0.08
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Name of process system
PID 4
Average use (%) 0.55
Module Module average use (%)
\SystemRoot\system32\ntoskrnl.exe 0.42
\SystemRoot\system32\drivers\ndis.sys 0.05
\SystemRoot\system32\DRIVERS\dne64x.sys 0.02
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Name of process explorer.exe
PID 3988
Average use (%) 0.43
Module Module average use (%)
\SystemRoot\System32\win32k.sys 0.15
\SystemRoot\system32\ntoskrnl.exe 0,14
\Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name chrome.exe
PID 7920
Average use (%) 0.39
Module Module average use (%)
\Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
0.14
\SystemRoot\system32\ntoskrnl.exe 0.00
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name WWAHost.exe
4604 PID
Average use (%) 0.28
Module Module average use (%)
\SystemRoot\system32\ntoskrnl.exe 0.10
\SystemRoot\SysWOW64\ntdll.dll 0.03
\Windows\SysWOW64\jscript9.dll 0.03
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name UoipService.exe
PID 2544
Average use (%) 0.25
Module Module average use (%)
\SystemRoot\system32\ntoskrnl.exe 0,14
\SystemRoot\system32\drivers\afd.sys 0.02
\Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
Process CPU Utilization: individual with significant CPU usage.
This process is responsible for a significant part of the total CPU utilization recorded during the trace.
Process name chrome.exe
PID 6600
Average use (%) 0.24
Module Module average use (%)
\Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
0.04
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00Information
Platform, resolution: timer Timer application stack
The battery of the modules loaded for the platform timer low in this process.
Requested period 10000
Asking to process ID 11968
Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
\Device\HarddiskVolume4\Windows\System32\kernel32.dll
\Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
\Device\HarddiskVolume4\Windows\System32\kernel32.dll
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
Political power: Active Power Plan
The current power in use plan
Plan custom name
Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
Power politicsower Plan personality (on battery)
The personality of the current power plan when the system is on battery power.
Personality power saver
Political power: video quality (on battery)
Windows Media Player allows to optimize the quality or energy savings during video playback.
Mode of quality balancing video quality and energy savings
Power politicsower Plan personality (Plugged In)
The personality of the current power plan when the system is connected.
Personality power saver
Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
Political power: video quality (connected)
Windows Media Player allows to optimize the quality or energy savings during video playback.
Quality optimization for video quality mode
Success of queries: analysis of system availability
The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
Battery information: battery
Battery ID Hewlett-PackardPrimary
Manufacturer Hewlett-Packard
Serial number
Chemistry LION
Long term 1
0 seal
Nominal capacity 54720
Last full 54720
Platform power management capabilities
looking at the States of sleep
Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
False S1 sleep taken in charge
False S2 taken sleep support
True S3 Sleep taken in charge
True S4 sleep taken in charge
Platform power management capabilities: connected standby support
Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
Connected supported watch fake
Platform power management capabilities: Adaptive brightness is supported.
This computer allows Windows to automatically control the brightness of the built-in display.
Platform power management capabilitiesrocessor power management capabilities
Effective processor power management allows the computer to automatically balance the performance and power consumption.
Group 0
Index 0
Idle state head 3
Idle Type idle ACPI (C) States State
Nominal frequency (MHz) 2401
Percentage of maximum Performance 100
Percentage the lowest performance 20
More low percentage of gas 2
Control of performance Type ACPI Performance (P) / (T) States of butterfly
Platform power management capabilitiesrocessor power management capabilities
Effective processor power management allows the computer to automatically balance the performance and power consumption.
Group 0
Index 1
Idle state head 3
Idle Type idle ACPI (C) States State
Nominal frequency (MHz) 2401
Percentage of maximum Performance 100
Percentage the lowest performance 20
More low percentage of gas 2
Control of performance Type ACPI Performance (P) / (T) States of butterfly
Platform power management capabilitiesrocessor power management capabilities
Effective processor power management allows the computer to automatically balance the performance and power consumption.
Group 0
Index 2
Idle state head 3
Idle Type idle ACPI (C) States State
Nominal frequency (MHz) 2401
Percentage of maximum Performance 100
Percentage the lowest performance 20
More low percentage of gas 2
Control of performance Type ACPI Performance (P) / (T) States of butterfly
Platform power management capabilitiesrocessor power management capabilities
Effective processor power management allows the computer to automatically balance the performance and power consumption.
Group 0
Index 3
Idle state head 3
Idle Type idle ACPI (C) States State
Nominal frequency (MHz) 2401
Percentage of maximum Performance 100
Percentage the lowest performance 20
More low percentage of gas 2
Controls of Type ACPI Performance (P) performance / Throttle (T)I found a thread on Microsoft answers community web site. Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year. This has been driving me crazy. In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer. If the account is not connected, after a few hours the computer stops to fall asleep. If you close the MS account, then the computer will sleep normally. My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft. This process is easy to do, go into the settings of PC and disconnect the account. It will keep your original profile.
Here is the link to the thread that got clued in the solution:
I consider this resolved issue that HP is concerned. Microsoft needs to address the issue. I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.
-
My client uses Windows Search to help track the files in a fairly large groups. Indexing and everything seem to work very well, but when the user performs a search, it returns the information that are expected, but when you click on some of the files that it generates this error:
"Cannot find 'file:///s:/XXXXX/XXXXXX.pdf'. "Make sure that Internet address or pat is correct.
(where XXXX/XXXX are the path and name, of course. It varies and is not a specific place, or all in the same places is originally the same error)
Varies depending on the issue and the only consistency I've found is than that error all tend to share the same name of 'Owner' and those who work divides different. Yet once again, the 'owners' vary. When browsing directly on the elements, following the exact path in error, the files open fine. In our case, 's:' is a mapped network share, but which seem to be the question either, as the other files in the search located on the same mapped share and in the same directory path work very well.
To make it even more confusing, the search of all works perfectly on another computer. All users have the same access right, reading/writing/execution, in the cases in question. The file doesn't seem to be open and in-use by other users.
The system in question is running Windows XP Professional SP3 and is connected to a domain active directory running Windows Server 2003. We have tried to do, and it did not help.
Any ideas? Thanks in advance for anything that can help you!
-Sean
Hello Grouchy_M,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the category of server on Technet. Following your question thanks for posting the link below:
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Problem with server HQ after upgrade
Just going through the process of upgradeing our current working installation.
We have server HQ upgrades of version 3.1.4 who was running successfully under windows 2003 server by using the postgre database integrated in version 4.1.0 on the same server.
The upgrade process seems to happen unhindered. Then we have configured the option "Run as service" went to windows services and the service started.
We waited 2 hours and whenever we try to connect to the site we get the message.
The HQ server is always from. The database is a bit more than 5 GB in size.
Should expect us start to have finished now?
Is there something in particular, that I must look in the newspapers?
I noticed that there was a previous post with a link to the ports required for HQserver.
I have checked and I can say none of the ports are used by other programs. Firewall Windows is not lit on this machine.
concerning
SpencerIt is indeed a redundant index, don't know why it is added here. Search for db - upgrade.xml in the installer and modify it. Find the following section:
precision = columnType "512" = "VARCHAR2" / >
targetDB 'postgresql' = >
CREATE INDEX cresp_err_idx ON EAM_CONFIG_RESPONSE USING btree (validationerr)
Remove the creation of the index:
targetDB 'postgresql' = >
CREATE INDEX cresp_err_idx ON EAM_CONFIG_RESPONSE USING btree (validationerr)
Restart your upgrade. He will have to investigate why it was put there in the first place.
Charles
-
Distribution of ASM & Failgroups
Hi gurus,
After Googl-ing as I had only blurry image on ASM aggregation and Fail groups.
Could you please contact intertwining of ASM 1. Concept,
2 ASM Fail group Concept. At least guide me through a URL.udayjampani wrote:
Understand the following scenario and explain,
I chose normal redundancy and provided no one fails the group specification.
So I have two groups of disks, the DATA and the FRA, which in turn have four discs, DATA_0000, DATA_0001, FRA_0000 and FRA_0001.
1. in the document, DATA_0000, DATA_0001 will be two groups of failure automatically.is that at the time?Yes, both discs would be in two different groups of failure and each of them would be owned by a single drive.
2. but the concept of interleaving, mirror file will be stored on discs, for example for a table, some data is stored in a disk, and remaining will be on the other disks. But this scenario will no data when there is failure of the right drive?
You mix two things. Do not combine striping and mirroring together. You have two disc mirroring would be but since you have only two disks, if we left, there will be no other drives available to support the disk group redundancy, loss of a drive would lead to term for the disassembly of the entire disk group. To confirm this, create a group of records with 3 disks and then lose one of the disks.
Aman...
-
How to give more relevance to one of the column in multi-column data store
Hi gurus,
When using multi-column datastore necessary to give more importance to one of the other column. How can we achieve the same?
SQL > create table test_sh4 (text1, text2 clob clob);
Here, while querying how can I give more relevant for the text1 Text2 column as column?
Table created.
SQL > alter table test_sh4 Add (Text3 clob);
Modified table.
SQL > start
2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
3 ctx_ddl.set_attribute
4 ("nd_mcd",
5 "columns."
6 ' replace (Text1, "", "") nd, Text1 text1, replace (Text1, "", "') nd, Text1 text1');
7 ctx_ddl.set_attribute ('nd_mcd', 'separator', 'new line');
8 ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
9 ctx_ddl.set_attribute ('test_lex1', 'spaces', ' /--------|-_ + "");
10 end;
11.
PL/SQL procedure successfully completed.
SQL > create index IX_test_sh4 on test_sh4 (Text3)
indexType is ctxsys.context
parameters
("nd_mcd of the data store
lexer test_lex1')
/ 2 3 4 5 6
Index created.I gave an example below. I added some data to your example. You had tags and columns duplicated in your multi_column_datastore, so I fixed it those. I removed the newline delimiter and added a section with sections of field group and add this section to the index settings group. Allows you to search in each section of field and apply different fats. You can apply weights by multiplying by a value entre.1 and 10 or several times multiplier to reduce or increase the score for a particular section.
SCOTT@orcl_11gR2> -- table structure you provided: SCOTT@orcl_11gR2> create table test_sh4 (text1 clob,text2 clob); Table created. SCOTT@orcl_11gR2> alter table test_sh4 add (text3 clob); Table altered. SCOTT@orcl_11gR2> -- added data: SCOTT@orcl_11gR2> insert all 2 into test_sh4 (text1, text2, text3) 3 values ('testword', 'word2', 'word3') 4 into test_sh4 (text1, text2, text3) 5 values ('word4', 'testword', 'word5') 6 into test_sh4 (text1, text2, text3) 7 values ('test word', 'word2', 'word3') 8 into test_sh4 (text1, text2, text3) 9 values ('word4', 'test word', 'word5') 10 select * from dual 11 / 4 rows created. SCOTT@orcl_11gR2> -- fixed duplicate column names and tags and SCOTT@orcl_11gR2> -- removed newline delimiter and SCOTT@orcl_11gR2> -- added section group with field sections: SCOTT@orcl_11gR2> begin 2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore'); 3 ctx_ddl.set_attribute 4 ('nd_mcd', 5 'columns', 6 'replace (text1, '' '', '''') nd1, 7 text1 text1, 8 replace (text2, '' '', '''') nd2, 9 text2 text2'); 10 ctx_ddl.create_preference ('test_lex1', 'basic_lexer'); 11 ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+'); 12 ctx_ddl.create_section_group ('test_sg', 'basic_section_group'); 13 ctx_ddl.add_field_section ('test_sg', 'text1', 'text1', true); 14 ctx_ddl.add_field_section ('test_sg', 'nd1', 'nd1', true); 15 ctx_ddl.add_field_section ('test_sg', 'text2', 'text2', true); 16 ctx_ddl.add_field_section ('test_sg', 'nd2', 'nd2', true); 17 end; 18 / PL/SQL procedure successfully completed. SCOTT@orcl_11gR2> -- added section group to index: SCOTT@orcl_11gR2> create index IX_test_sh4 on test_sh4 (text3) 2 indextype is ctxsys.context 3 parameters 4 ('datastore nd_mcd 5 lexer test_lex1 6 section group test_sg') 7 / Index created. SCOTT@orcl_11gR2> column text1 format a10 SCOTT@orcl_11gR2> column text2 format a10 SCOTT@orcl_11gR2> column text3 format a10 SCOTT@orcl_11gR2> -- without weighting: SCOTT@orcl_11gR2> select score (1), t.* from test_sh4 t 2 where contains 3 (t.text3, 4 'testword', 5 1) > 0 6 / SCORE(1) TEXT1 TEXT2 TEXT3 ---------- ---------- ---------- ---------- 6 testword word2 word3 6 word4 testword word5 3 test word word2 word3 3 word4 test word word5 4 rows selected. SCOTT@orcl_11gR2> -- with weighting: SCOTT@orcl_11gR2> select score (1), t.* from test_sh4 t 2 where contains 3 (t.text3, 4 '(testword within text1) * 10 or 5 (testword within nd1) * 5 or 6 (testword within text2) * .5 or 7 (testword within nd2) * .1', 8 1) > 0 9 order by score (1) desc 10 / SCORE(1) TEXT1 TEXT2 TEXT3 ---------- ---------- ---------- ---------- 48 testword word2 word3 20 test word word2 word3 2 word4 testword word5 1 word4 test word word5 4 rows selected. -
Problem in loop... How to create and lock a set of PathItems?
Hi all!
I'm a noob... a very confused
And I'm not trying to get this thing to work
So here's what I have. The first loop catches from geometries in the active document and he turns around itself to create duplicates. The second loop is supposed to work around several geometries autour geometries newly created.
But instead of creating a radiating pattern, copy the following code builds a Tower: for the second loop every time, he seized the last geometry drawn instead of what is in the 'Original '.
Can someone explain what is the problem? Thank you!
NumPaths = 1 to frontDocument.PathItems.count
Set myPath = frontDocument.PathItems.item (NumPaths)
For index = 0 to 30
Define newPath = myPath.Duplicate
Call newPath.translate (100 * sin (6.14* index/30), 100 * cos (6.14* index/30))
Call newPath.rotate (360 * index/30)
Next
Next
The original value = frontDocument.PathItems
NumPaths = 1 to Original.count
Set myPath = Original.Item (NumPaths)
For index = 0 to 30
Define newPath = myPath.Duplicate
Call newPath.translate (100 * sin (6.14* index/30), 100 * cos (6.14* index/30))
Call newPath.rotate (360 * index/30)
Next
Next
something like that?
first loop is a 'ring', in order to make this 'ring' turning around to make the sphere that you do a group, so the second loop duplicating the 'ring' (Group) and basically does the same thing as the first, but uses the group instead of pathItems.
For NumPaths = 1 To frontDocument.PathItems.Count Set myPath = frontDocument.PathItems.Item(NumPaths) Set myGroup = frontDocument.GroupItems.Add 'add a group For Index = 0 To 30 Set newPath = myPath.Duplicate(myGroup) 'add each duplicate to the group Call newPath.translate(100 * Sin(6.14 * Index / 30), 100 * Cos(6.14 * Index / 30)) Call newPath.rotate(360 * Index / 30) Next Next Set Original = frontDocument.GroupItems 'make original all groupItems instead of pathItems For NumPaths = 1 To Original.Count Set myGroup = Original.Item(NumPaths) ' For Index = 0 To 30 Set newGroup = myGroup.Duplicate 'duplicate the groups Call newGroup.translate(100 * Sin(6.14 * Index / 30), 100 * Cos(6.14 * Index / 30)) Call newGroup.rotate(360 * Index / 30) Next Next -
referring to an object in a repeating subform
Trying to get the value of a text field in a repeating subform (lets call it the subform "Identify") of my form to be set to the value of "TextField18" in the corresponding instance of Subform subform 'groups '.
In more detail:
In the form, I ask the question - groups how do you have? The number of this answer is the number of instances of the subform 'Groups' that I have. Within this subform is a text field ("text Field18") where the user will enter the name of the group.
Later, in a completely different section of the same shape, I have a subform called "identify." I understand how to set the number of instances of "Identify" to match the number of instances of 'groups '. I want to do is have a field 'Identify' display the name of each group (as he entered "TextField18" in the "Groups" subform) - one per instance of the subform. So if the groups were in Orange, red and purple entered instances of 1-3 respectively on the subform "Groups". I want the field 1 of the "Itentify" subform to autopopulate with Orange and the field in case 2 of autopopulate pending with red and so on.
Is this possible? All advice is appreciated!
Hello
Your repeated subforms, groups and identify, will have a property index to identify their appearance. Thus, in the case of calculation of the object textfield to identify using JavaScript place the following code;
xfa.resolveNode ("groups [" + Identify.index +"]. TextField18") .rawValue;
This will return the corresponding value in the subforms of groups. Note You may need to adjust the SOM expression if the groups and identify them are not at the same level.
Bruce
-
ctx_doc. Markup html if break keywords found in the html tags
Running Oracle 9.2.0.8
I said to me the following indexes:
In my user data store, I build an XML representation of the content, by wrapping each column with a XML tag clob value and the content of CLOB is ignored with CDATA blocks, as it contains various html tags.DROP INDEX MULTI_CONTENT_EN_IDX; DROP INDEX MULTI_CONTENT_FR_IDX; Begin CTX_DDL.drop_preference('CRT_PREF_EN'); CTX_DDL.drop_preference('CRT_PREF_FR'); CTX_DDL.drop_section_group('CRT_XML_SECTION'); ctx_ddl.drop_preference('crt_user_datastore_en'); ctx_ddl.drop_preference('crt_user_datastore_fr'); ctx_ddl.drop_preference('CRT_LEXER_FR'); ctx_ddl.drop_preference('CRT_LEXER_EN'); ctx_ddl.create_preference( 'crt_user_datastore_en', 'user_datastore' ); ctx_ddl.set_attribute( 'crt_user_datastore_en', 'procedure', 'ctxsys_multi_index_en_prc' ); ctx_ddl.set_attribute('crt_user_datastore_en', 'output_type', 'CLOB'); ctx_ddl.create_preference( 'crt_user_datastore_fr', 'user_datastore' ); ctx_ddl.set_attribute( 'crt_user_datastore_fr', 'procedure', 'ctxsys_multi_index_fr_prc' ); ctx_ddl.set_attribute('crt_user_datastore_fr', 'output_type', 'CLOB'); CTX_DDL.create_preference('CRT_PREF_EN','BASIC_WORDLIST'); ctx_ddl.set_attribute('CRT_PREF_EN','FUZZY_MATCH','ENGLISH'); ctx_ddl.set_attribute('CRT_PREF_EN','STEMMER','ENGLISH'); ctx_ddl.set_attribute('CRT_PREF_EN','SUBSTRING_INDEX','TRUE'); CTX_DDL.create_preference('CRT_PREF_FR','BASIC_WORDLIST'); ctx_ddl.set_attribute('CRT_PREF_FR','FUZZY_MATCH','FRENCH'); ctx_ddl.set_attribute('CRT_PREF_FR','STEMMER','FRENCH'); ctx_ddl.set_attribute('CRT_PREF_FR','SUBSTRING_INDEX','TRUE'); CTX_DDL.create_section_group('CRT_XML_SECTION','XML_SECTION_GROUP'); CTX_DDL.add_zone_section('CRT_XML_SECTION', 'title', 'title'); CTX_DDL.add_zone_section('CRT_XML_SECTION', 'content', 'content'); ctx_ddl.create_preference('CRT_LEXER_EN', 'BASIC_LEXER'); ctx_ddl.set_attribute('CRT_LEXER_EN', 'skipjoins', '-'); ctx_ddl.set_attribute ( 'CRT_LEXER_EN', 'index_text', 'YES'); ctx_ddl.set_attribute ( 'CRT_LEXER_EN', 'base_letter', 'YES'); ctx_ddl.set_attribute ( 'CRT_LEXER_EN', 'index_stems', 'ENGLISH'); ctx_ddl.set_attribute ( 'CRT_LEXER_EN', 'index_themes', 'YES'); ctx_ddl.set_attribute ( 'CRT_LEXER_EN', 'theme_language', 'ENGLISH'); ctx_ddl.create_preference('CRT_LEXER_FR', 'BASIC_LEXER'); ctx_ddl.set_attribute('CRT_LEXER_FR', 'skipjoins', '-'); ctx_ddl.set_attribute ( 'CRT_LEXER_FR', 'index_text', 'YES'); ctx_ddl.set_attribute ( 'CRT_LEXER_FR', 'base_letter', 'YES'); ctx_ddl.set_attribute ( 'CRT_LEXER_FR', 'index_stems', 'FRENCH'); ctx_ddl.set_attribute ( 'CRT_LEXER_FR', 'index_themes', 'YES'); ctx_ddl.set_attribute ( 'CRT_LEXER_FR', 'theme_language', 'FRENCH'); end; CREATE INDEX MULTI_CONTENT_EN_IDX ON CONTENTS (top_html_content_en) INDEXTYPE IS CTXSYS.CONTEXT parameters ('filter ctxsys.null_filter DATASTORE crt_user_datastore_en LEXER CRT_LEXER_EN wordlist CRT_PREF_EN section group CRT_XML_SECTION'); CREATE INDEX MULTI_CONTENT_FR_IDX ON CONTENTS (top_html_content_fr) INDEXTYPE IS CTXSYS.CONTEXT parameters ('filter ctxsys.null_filter DATASTORE crt_user_datastore_fr LEXER CRT_LEXER_fr wordlist CRT_PREF_fr section group CRT_XML_SECTION');
My point culminating procedure resembles the following:
I use SQLXML to retrieve the nodes (since I'm on XML_SECTION_GROUP), and stripping the CDATA blocks... then copy it into the out CLOB, back to the appellant.PROCEDURE highlight_query_result ( p_query_string_in IN VARCHAR2, p_index_name_in IN VARCHAR2, p_pk_id_in IN NUMBER, p_top_content_html_out IN OUT NOCOPY CLOB, p_content_html_out IN OUT NOCOPY CLOB, pn_error_ind_out OUT error_logs.error_log_id%TYPE ) IS l_clob CLOB; l_cdata_start_len INTEGER := LENGTH ('<![CDATA['); l_cdata_end_len INTEGER := LENGTH (']]>'); l_top_content CLOB; l_bottom_content CLOB; l_len INTEGER; xmldoc XMLTYPE; PROCEDURE cleanuptemplobs IS BEGIN IF DBMS_LOB.istemporary (l_top_content) = 1 THEN /* Free the temporary LOB locator: */ DBMS_LOB.freetemporary (l_top_content); END IF; IF DBMS_LOB.istemporary (l_bottom_content) = 1 THEN /* Free the temporary LOB locator: */ DBMS_LOB.freetemporary (l_bottom_content); END IF; END cleanuptemplobs; BEGIN pn_error_ind_out := 0; DBMS_LOB.createtemporary (l_top_content, TRUE); DBMS_LOB.createtemporary (l_bottom_content, TRUE); ctx_doc.markup (index_name => p_index_name_in, textkey => ctx_doc.pkencode (p_pk_id_in), text_query => p_query_string_in, restab => l_clob, plaintext => false, tagset => 'HTML_DEFAULT', starttag => '<span class="highlight">', endtag => '</span>' ); xmldoc := XMLTYPE.createxml (l_clob); IF xmldoc IS NOT NULL THEN IF xmldoc.EXISTSNODE ('//bottom_content/text()') = 1 THEN l_bottom_content := xmldoc.EXTRACT ('//bottom_content/text()').getclobval (); l_len := DBMS_LOB.getlength (l_bottom_content); DBMS_LOB.COPY (p_content_html_out, l_bottom_content, l_len - (l_cdata_start_len + l_cdata_end_len), 1, l_cdata_start_len + 1 ); END IF; IF xmldoc.EXISTSNODE ('//top_content/text()') = 1 THEN l_top_content := xmldoc.EXTRACT ('//top_content/text()').getclobval (); l_len := DBMS_LOB.getlength (l_top_content); DBMS_LOB.COPY (p_top_content_html_out, l_top_content, l_len - (l_cdata_start_len + l_cdata_end_len), 1, l_cdata_start_len + 1 ); END IF; END IF; -- cleanup to avoid memory leaks... cleanuptemplobs; EXCEPTION WHEN OTHERS THEN -- cleanup to avoid memory leaks... cleanuptemplobs; pn_error_ind_out := SQLCODE; log_package_error_prc ('search_pkg.highlight_query_result', SQLERRM, pn_error_ind_out ); END highlight_query_result;
Everything seems to work fine, until I find myself with a culmination of the keyword in a HREF... which basically breaks the page with no html tags valid on exit... such as:
I have the feeling that this could be due to CDATA and XML block... being escaped on output html tags, and even if null_filter is used for indexing, it ignores the html escape characters and indexes all content stream.<a href="http://www.linktowebsite.com/<span class="highlight">keyword</span>.shtml#obtain">How to request a copy of a <span class="highlight">keyword</span> already issued</a>
Any ideas?If what you have is html and you must keep intact, then it makes sense to use html_section_group instead of xml_section_group. The following creates a minimal test environment, reproduces the problem with the xml_section_group, and fixes the problem by using html_section_group. Lists of multiples and lexers words are not necessary to reproduce the problem. Markup draws in the field index tables, so what you do afterwards are not relevant to the problem. What follows is therefore only of creating the table with primary key, the insertion of a row of data, the creation of the Group of sections and index, display of chips and markup output. If refine you the code like this, which makes it much easier to understand and reproduce the problem and refine the cause.
SCOTT@orcl_11g> -- test environment: SCOTT@orcl_11g> -- table and data: SCOTT@orcl_11g> CREATE TABLE CONTENTS_TEST 2 (CONTENT_ID NUMBER(10) PRIMARY KEY, 3 CONTENT_HTML_CONTENT CLOB) 4 / Table created. SCOTT@orcl_11g> SET DEFINE OFF SCOTT@orcl_11g> Insert into CONTENTS_TEST 2 (CONTENT_ID, CONTENT_HTML_CONTENT) 3 Values 4 (1, 5 '<![CDATA[AIG - Program Overview]]> Introduction
6 Apprenticeship 7 ]]><![CDATA[AIG - Program Overview]]> Introduction
apprenticeship.html">Apprenticeship ]]><![CDATA[AIG - Program Overview]]> Introduction
Apprenticeship ]]>
Maybe you are looking for
-
Share custom patches garageband
I have a number of patches custom in GarageBand on my MacbookAir 10.1.2 and would like to have these imported to garageband on my iMac. Can someone give a clue as how to get there?
-
I bought my mac (OS X 10.6.8) and my printer 1536 dnf mfp in March 2011. Two well worked until last week, when my scanner stopped scanning. Printer, copier and fax machine still work. The HP software appears to be scan when I press "scan" in that the
-
Equium A100 (PSAAQ) network adapter problem
Dear allI use * Equium A100 (PSAAQ) * laptop for 3 years. Suddenly, he has developed the kind of typical problem. I use Vista. The LAN is installed and I could access network through it, until the copula od days back. Now even if the network card is
-
Some fax machines do not receive
We have a HP Officejet 4620, which runs on Windows XP. It receives faxes, but not others. I had the phone line, checked and it works fine. The error message is received with faxes that are not received is "Connect".Receive failed"How can this be res
-
Windows Defender and Microsoft malicious software removal tool
I'm unable to download, install, or run Windows Defender, I do... I used to have Windows Defender, when I tried to run, I got a 'Closed' very quick scoring, but he disappeared too quickly to see more, so I removed and tried to download and install ag