Grupo hogar PCs windows 7 starts there Windows 7 home prermiun
What debo hacer para put computers can share windows media center¿?
Hello
You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.
If you can't find a suitable language, please go here:
http://support.Microsoft.com/common/international.aspx
for other international support options.
Thank you.
Tags: Windows
Similar Questions
-
I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help. I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit. and the bios HP 7.07 (seems no possible to upgrade the bios).
As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...
I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start. However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something. There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.
and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...
There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.
Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation
makes no since to me. the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).
But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.
Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make. to see if something pops up in a month or something.
It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8
but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?
HP you really need to get on the ball and give us a straight answer on this subject. Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?
anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand
It's a PCI express 16 x slot card that is 3.0
Here are the specifications of deetailed according to the guidelines of your page
http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835
the card SHOULD WORK fine. I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.
However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector
so it SHOULD work.
and performance tests indicate that it FACT it's just stupid... bios that asks the question.
I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...
HP you are one of the largest suppliers of computers you know technology what are YOUR computers. WHY cant you give us a direct awnser on this.
ITS VERY frustrating
and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.
because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.
and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...
He shoudnt be as much hassle there?
Thank you.
Hello
You need update the BIOS that is listed under Windows 8 to support the new graphics. You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS. While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way. 8 BIOS version is your best chance to get the latest graphics cards to work.
You can Windows 8 Enterprise 90 days trial.
If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.
The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.
-
Problem between Windows XP Home and Windows 7 Starter of file sharing
Hello, I have a problem with file sharing: my desktop computer running Windows XP Home Edition and my netbook runs Windows 7 Starter Edition.
On Windows XP, I shared a folder: Win 7 is able to open the directory and the files in the list, but there is no way I can open any file in the folder XP, nor that I can transfer the any of these files to my netbook.
All I get is an error "access denied."The XP Workgroup is the same as the 7 home network, and the users have all the privileges on both computers.
Can you help me to sort out what is happening, please?
Thank you.
B.As a first step, you have XP Home, which means that the 'Simple file sharing' is applied on this machine. In addition, this means that any network connection on your XP Home of any another machine machine is forced to authenticate you as a user 'Guest', regardless of what a privilege that may be the real user. In from here, it would seem that the 'Guest' user doesn't have privilege for the files or folders that you share. To resolve this problem, you must change the access permissions to these files.
If you drag (move) files on your computer in your share folder, the origin on the file permissions will be maintained. On the contrary, I would say that you copy the file to the shared folder by dragging with the right button of the mouse and select 'Copy' instead of 'move '. A copied file will end with permissions for the destination folder that will be generally more suitable for sharing.
To the files and folders that are already in this folder, to change permissions, you must Access the 'Security' tab under the Properties screen. In XP Home, this is possible if you log in as administrator in "safe" mode To start your computer in Safe Mode (repeatedly tap the F8 during the startup key key), connect you as an administrator user, navigate to the file or the folder with problems of access, right-click on it, select 'Properties', select the 'Security' tab and set security such as 'everyone' (or 'guest') has the privilege of access you want.
HTH,
JW -
Windows xp starts
I lost my backup for windows xp home disks and now my computer asks me for the startup disk. Is there anywhere I can download the file on a dvd?Hi DrKathy1950,
· Did you do changes on the computer before the show?
· When she asks the startup disk?
· You get the error message?
· Are you able to boot to the desktop?
Answer with the information required to help more.
For reference:
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Error - NTLDR missing Windows XP Home computer does not start.
Original title: XP-based computer does not start.
XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!
The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.
As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.
Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Your system have IDE or SATA disks?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
System32 error, you see, is what exactly?
Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.
After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.
Here's how:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).
This is not the same as recovery disks that may have come to a store to purchase the system.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=trueA good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?
original title: slow start- Faster processor.
- Fastest hard drive.
- Faster or more RAM/memory.
- Less things loading at startup.
- Appropriate and the most recent hardware device drivers.
In XP, you can cleanup and optimize it in some way, by using the following tips:
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
I recently installed a network storage drive to my network environments with desktop computer running windows 7, windows xp professional and windows xp home.
Have this problems that even when the drive has been mapped with identification information entered and save selection 'auto re - connect on each session' in windows xp home. Computers running windows xp professional, and windows 7 allows me to create and record identification information that allows the reader to reconnect each time the system starts up, but not on xp family.
Tried several methods of control over the update of the firmware, upgrade of service pack, part 3 card utilities and windows drive mapping manual, but it does not help.
Hope someone could give advice what could be done to solve this problem because it seems very likely that it due to windows problems.
Under user account, manage stored password options, I could create credentials in XP Pro, but not at home.
Thanks for your reply.
Correction of syntax: there is an oblique lack between "servername" and "share name". The slash in front of 'USER' is also the polarity. It should be rather than the oblique as in:
NET use Z: \\servername\sharename / USER: username password
-JW
-
Unable to start boot corrupted files Windows Vista Home premium
Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.
Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go
burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)
-
my laptop hp dv5 with windows vista home premium series starts do not
my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help
Hello
Power outages often lead to problems of material with computers / laptops.
If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.
If under warranty contact HP.
If this isn't the case, under services, contact a repair shop, local.
See you soon.
-
Validation in Windows Vista Home Premium at the start: errors and complications.
I was directed to this forum as a last chance for my situation. I'll copy what I wrote before:
First of all: I can't run Microsoft Genuine Advantage Diagnostic Tool.
With that of the road, I'll try to explain my situation. Earlier today, I ran in the hope to get rid of some unnecessary files in disk cleanup. Well, he eventually delete most everything out of my C: drive. So I ran a restoration of the system to an earlier time. After the restoration, I tried to connect but received a box saying that my Windows Vista Home Premium product key is not valid. They gave me three options:
Reduced functionality mode (does not work; see below)
Enter the product key
Contact HP - do you have this: they wanted $ 100.
Now before to get started by offering suggestions, you need to get more information.
I can't use the reduced functionality mode. When I click on it, an error with file not found window appears. The only way I can access my desktop is by going into safe mode, and I can't go in safe mode with network. So based on this little bump in the road, I was not able to use the tips I found online, because none of those working in safe mode.
Now there is more. Frustrated, I tried to follow guides anyway. So I followed the following steps:
Step #3 game
(1) open Internet browser
(2) Type%windir%\system32into the browser address bar.
(3) find the CMD.exe file
(4) make a right click on CMD.exe and selectrun as administrator
(5) type: net stop slsvc (it may ask you if you are sure, click Yes)
(6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
(7) type: Rename tokens.dat tokens.bar
(8) type: cd %windir%\system32
(9) Typenet start slsvc
(10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
(11) restart twice
Not only that not solve my problem (since I was in safe mode I was refused permission), but it has created a new problem. Now when I start my computer normally, IM is more given three options (reduced functionality mode, enter a product key, contact HP).
Instead, when I log on, an error pops up saying: "Insert the Windows CD or installation DVD into your computer to begin the process of resettlement." Now, my computer was shipped with windows and everything installed by the factory with the sticker on the side of the tower. I have no Dvd or Cd.
I've had this computer for almost 3 years and I can not lose what I have on my computer. I have a genuine copy of Windows. I have no idea what I'm supposed to do now.
I used these links:
http://social.Microsoft.com/forums/en-us/genuinevista/thread/3561f32a-d581-4DBD-b90e-fd680f970258/
http://social.Microsoft.com/forums/en-us/genuinevista/thread/c9340e5d-7efb-4edd-B256-defa6b997062/
http://social.Microsoft.com/forums/en-us/genuinevista/thread/ae720c35-3C91-4f07-85AD-82d99297cb11
and many others that I can't find my way.
I am posting this from my laptop not my computer with the problem.
Here is the link to the original thread:
http://social.Microsoft.com/forums/en-us/genuinevista/thread/6b962e8b-ff83-4b4d-a3bd-c7d9a8dc2471
Is it possible that I can fix this? Can I install Linux or something, just so that I can access my files? Thank you.
Hello
Since you are concerned about the data on the drive, I suggest you first backup of data.
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-filesI recommend you contact the manufacturer of the system to help about it.http://h30434.www3.HP.com/
http://welcome.HP.com/country/us/en/support.html
http://welcome.HP.com/country/us/en/contact_us.htmlThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Netlogon service does not start windows 7 Home Basic SP1
Hello
We will try to start the service net logon in Windows 7 Home Basic SP1 but mistake mentioned below.
Error:
There is currently no available connection server to process the logon request
Hi stephane,
The computer is on a domain network?
If the computer is on a problem of domain that you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
-
Windows Anytime Upgrade: Windows 7 Starter to Windows 7 Home Premium
It could not be upgraded.
I read the KB and found this upgrade from 32 bit to 64 bit Windows 7 is not allowed.
But not sure that this is the product key for Windows 7 Home Premium 32-bit or 64-bit. Can I know how to check? There is no word such as x 64 or 64-bit key on the COA label.
What I am sure, is that Windows 7 Starter is SP1, while the Windows 7 Home Premium has no preloaded service pack.
The above information is sufficient for anyone to help out me? What other ways can I try? (I don't have DVD of Windows 7 Starter, the reason why I don't have the DVD Windows 7 Home Premium, is that the PC was purchased from HP that came without any Windows installation disk and the recovery disks that I created were easier to read by the optical drive).
It could not be upgraded.
I read the KB and found this upgrade from 32 bit to 64 bit Windows 7 is not allowed.
But not sure that this is the product key for Windows 7 Home Premium 32-bit or 64-bit. Can I know how to check? There is no word such as x 64 or 64-bit key on the COA label.
Product keys are not specific architecture (32-bit or 64-bit), as long as you have corresponding to a key for the edition you want to install, you can use either 32-bit or 64-bit version of it.
What I am sure, is that Windows 7 Starter is SP1, while the Windows 7 Home Premium has no preloaded service pack.
Windows 7 Starter Edition is 32-bit only, so if you had to do an upgrade to Home Premium, it would lead to a 32-bit version of Windows 7 Home Premium only. If you need to migrate to a 64-bit version of Home Premium, you will need to invest in a license to upgrade to Windows 7 Home Premium retail that includes 64-bit disk.
The above information is sufficient for anyone to help out me? What other ways can I try? (I don't have DVD of Windows 7 Starter, the reason why I don't have the DVD Windows 7 Home Premium, is that the PC was purchased from HP that came without any Windows installation disk and the recovery disks that I created were easier to read by the optical drive).
If you have Windows 7 Starter installed, it is likely on a Netbook, running a 64-bit would probably be too much for such a system, I suggest you stick with 32 bit Windows 7 Home Premium if you need the features it offers.
Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.
Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstall
-
So if I have a Windows7 Home Premium 64 - bit operating system and I use a processor dual core (Intel Dual Core e5300 CPU) are fully compatible or how they work together, given the fact that Windows 7 recognizes that one of the two processors? Playback of the system is expressed in the fact that it has two current processors. Both processors work simultaneously to form a combined data stream is a dormant or they turn on and off opposing to another so that each works half the time? Many scenarios as possible, but I would like to know... the real answer as to what needs to be changed eventually to bring together a system more fluid? My main question is the operating system and the processor may be an incompatibility problem that has not yet been addressed? I can't find any answer in the Center Compatabiity of Windows 7 or anywhere else. Or is the limitation of windows 7 Home Premium and only be able to support an unfounded processor see the fact that there are many systems that are in work today with these components. ?
Hey Randy,
If your system has two separate physical processors (not hearts) and you are running Windows 7 Home Premium, the second processor is completely ignored. It turns on and turn his fans, but it does not all rights for the computer. Windows 7 Home Premium will not take advantage of a single processor.
However, if you have a single physical processor with multiple cores, Windows 7 64-bit will benefit from up to 256 cores. It is very probably the type of machine that you have because it is quite rare to have multiple processors co-location in a workstation computer.
In this scenario, Windows will use two cores for separate tasks. Applications will be evenly distributed between the carrots, unless the application has been written to take advantage of multiple cores. The two hearts are turned on and both are used when the system is running.
You can check if Windows has recognized the two hearts looking Manager of the tasks of your system:
- Open the Task Manager by right-clicking the taskbar, and then click Start Task Manager.
- Click the performance tab.
The top two graphs show how much CPU is used, as well at the moment and for a few minutes. If the CPU usage history graph seems shared, your computer has multiple processors, a single dual-core CPU or both.
Windows 7 system requirements also go in a little more detail on how many windows cores/processors can take in charge:
http://Windows.Microsoft.com/systemrequirements
Hope this helps to answer your question!
-
TS-l663b cd/dvd "device cannot start code 10" after uppgrade from vista to windows 7 home
Compaq CQ60-216DX
Hi, I've updated from Vista to Windows 7 Home, and now the CD player is missing and displays an error code "10" DEVICE cannot NOT START, under Device Manager.
Looked for the drivers updated on the HP Support, there is none for CD player.
Cannot back driver, grayed out.
Restore opportunity to go back 2 months and still no progress. Installed software recently withdrawn from the HP (C5280) printer as well.
Immediately after the upgrade, the CD player worked fine. Same load of music in iTunes.
I am at a loss. Any ideas?
Thank you
Fabe
Paul, thanks for the quick response!
Although the tool automated fix - It did not tour, the link you provided, was told in the right direction.
http://support.Microsoft.com/kb/314060#win7fix
It seems that it is a well known problem of incompatibility between the TS-L663B with the Windows 7 upgrade.
I just had to read the Let Me Fix It Myself solution because that relates to Windows7 and change the registry.
Thanks again,
Problem SOLVED!
-
Windows xp Home does not start
Computer is a Dell Dimension 4700 running Windows XP Home Edition
Power failed during the installation of an update online. (Not sure if from Dell, Microsoft or other software like Ms guitarsid was at the controls at the time). Windows does not start, not in normal, not safe, not in the last successful startup - nothing. The windows screen comes up, hard drive shuts off and the blue pulse goes from left to right as always. (In safe mode, a list of files appears on the screen, then the hard drive goes off and nothing works)
CTRL/Alt/Del does not work, no Esc. In the configuration, the CD player turns out be "(pas présente)" so that the computer is not even there for my windows xp reinstall disk even if the CD driver lite shows the disk iteslf is read to the Conference on disarmament. " All disks except the hard disk are displayed in the form of "(absent)" "
Maybe you are looking for
-
identify and eliminate unwanted startup programs
How can I determine if the programs that run at startup can be eliminated to improve performance? (win XP pro)
-
I get a blue screen everytime I reboot my laptop. I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I am not able to know which driver is causing this pro
-
message please install moble control me get rid of this latest version of Itunes!
When the message box from outlook stands up and says "Please install the latest Itunes Mobile control me, how can I get rid of this?
-
my computer keeps showing an error at startup:-run DLL error in c:\window\system32\nvcpl.dll.
He said entry missing: NV STARTUP, any idea of please, not very irritable Peter
-
the d3100 docking station will work with any machine with usb 3?
Hey out there, I'm trying to find out if the work of the docking station d3100 with any machine with usb 3? I want to be able to have my two screens, keyboard and mouse plugged into the docking station and then plug it into my laptop 15 xps but I wan