GS116 V2 Dead on Arrival

Similar Questions

• All new iMac 5K dies after a month

  My latest iMac was a mid-2006 iMac Intel Duo2 which lasted 9 years. After a lot of contemplation on a template, I recently replaced by top-shelf configuration to a new iMac 27 "5K i7 4.0 GHz with 512 GB SSD and 16 GB of RAM. I bought this about a month ago. I had a single instance of the iMac to sleep but does not wake, who magically fixed itself. Yesterday, I saw my iMac fade to sleep, you press the USB keyboard. Nothing. I tried all kinds of technical support and hardware/power resets. Nothing. The unit is covered by the warranty and the long-term care plan, but the end result is out-of-commission the days with a repair. What happens here? Does anyone else have this problem? I'm not expecting one of the products the most expensive Apple have unexpectedly die. I know that Apple will fix and make it right, but what kind of remedies customer service I have here? I couldn't even find a mechanism to express my complaint and my sense of frustration. What can I do to make me feel like Apple recognizes the stress and inconvenience of this?

  I feel your pain. Around 2005, I bought a new laptop Mac that was almost dead on arrival. He was here Saturday night not the time to get back to the store and no chance to do anything until Monday afternoon. But this experience, like yours, is the case of 1%. In my work I have put in place and set up thousands of Mac computers and a very small percentage have been DOA or have died in the first weeks of the property. It happens. Make an appointment with a Mac Genius or find an authorized service center and take the computer for repair.

  Your computer has a 1 year warranty, and the fact that you bought AppleCare shows that you understand the risks of buying expensive electronic equipment.

  < edited by hosts >

• Tecra A4 noisy display card

  Hi all

  I am currently facing a very disconcerting problem on my Tecra A4. It has an ATI X 300 128 MB GPU.

  With maximum hardware acceleration turned on, I get continuous high sound tone every time that some parts of the screen changes. For example, if I drag a window around the screen, I hear this all the time.

  It worsens a lot a lot when I run graphics intensive games. For example, when a 3D graphics benchmark program was running, the sound is just unbearable.

  For purposes of normal work, I can reduce the noise by turning off graphics hardware acceleration. However, for games, it is impossible!

  Please advise what the problem might be and what I can do to solve. It's the replacement laptop that the company sent me the first was dead on arrival

  Thank you.

  Wishes
  Khim.

  Hello

  did you search for the Toshiba site for an update of the driver?
  I can't tell you what to do because this device is very new!
  In my opinion, you can make a single step (to be different if it's hard - or software).
  Save all your important data and do a full restore of the system. Then search for the driver on the Toshiba site updates and try to play a game. If the problem is still there, you have a hardware or driver problem.
  For an update of the driver, you will need to wait until what Toshiba give him!
  Sorry!

• HP ENVY 750-167c Desktop: I just bought this PC can support this new video card?

  We just bought this PC http://support.hp.com/us-en/document/c04812516

  We have installed a gtx 750 Ti and its drivers and it worked very well. After a few months, so we decided to move to a 970 gtx so we had a CX500 of Corsair power supply.

  I installed the gtx 970 and plugged all the connectors of power required for the card as well.

  Fans of 970's and the LED lights up, but there is no flow to the monitor.

  So I move the cable from the monitor to the gtx 970 e / s for the video embedded on the motherboard (realization of the motherboard is not pass to the output of the card) and check the Device Manager.

  Even, Device Manager does not detect the card.

  I then reinstall the Ti 750 with its drivers and it works fine again. I have uninstall the 750 Ti and its drivers and try again with the 970 and nothing.

  We bought the 970 off of ebay. The seller said that the card had been inspected and tested to work, but I can't make it work.

  I don't know if I'm doing something wrong or if the card is dead on arrival. Help, please.

  Someone asked me to update the bios of the motherboard, but I think that I already have the latest version of the bios for the motherboard of Odense. This motherboard is supposed to take on the gtx 970 or am I limited?

  Make sure you have the latest version of the bios A0.12 ROM SSID 2 b 47. It is on the page of downloading software to your pc. If you do and it still does not work. Most likely, he is dead and you've scammed. After all, it's Ebay. There are tons of people.

• A few questions about the Satellite A200 - 204 (PSAE6E)

  I recently bought a Toshiba model Satellite A200 - 204 (PSAE6E) bought the 05/12/2008, the garage.
  NATIONAL ALVAREZ (Al Khoudh, Oman),

  Sealed opening box, I realized that product had two questions, I immediately reported it to the dealer.
  (1) red spot on the LCD (Pixel damage)
  (2) LCD junk shows up after every 10-15 minutes of use.

  For the Point 1.*
  The Service Center authorized returned the noteback quote myself
  "The question of a white spot on the LCD is not the responsibility of the Department."

  For the point 2.
  The dealer has made installation of o/s for 2-3 hours of surveillance.
  Now ask to take me to authorized service center and keep for 2-3 days of surveillance.
  only then can the material be confirmed (as appropriate).

  However, I would like an honest of any opinion if this can be termed as "DEAD ON ARRIVAL" & can I request a replacement in these circumstances!
  Kind regards

  BILEL RAO

  Published by: ADMIN

  Hey Buddy

  As far as I know dead on arrival questions are always issues between business partners.
  So if something is wrong with your laptop, you could request a laptop replacement. You should ask your dealer to laptop.

  Now, I want to say something about your question;

  I found helpful article from Toshiba on the dead pixel problems:
  [What is the maximum number allowed and the type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels? | http://support.Toshiba-tro.de/KB0/TSB5400ZD0002R01.htm]

  Usually it is not big thing to do because there is a kind of tolerance of dead pixels.
  Only if the number of dead pixel is larger, then the number described in the document above the ASP will replace the screen.
  The best advice is to go back to the dealer and replace the notebook.

  On this second volume of Toshiba, you can find more information about the tolerance of dead pixel:
  [I have one or more bad pixels on my screen, I can fix? | http://support.Toshiba-tro.de/KB0/FAQ350079001NR01.htm]

  Good luck

• 23 - d160qd envy: new motherboard, now empty screen and 6 beeps. Cannot change the legacy BIOS. Help!

  Good ladies and Gentlemenof the Interwebulars, I hope someone can shed some light on my situation.

  Walked down one day to see that my computer would not start. A diagnosis which in a bad power port. Got a new motherboard because after desoldering (or that's what I tried to do) I realized that it was small to (re) welding in and I could not find the right part to reorganize.

  so I got a new motherboard. The number replacement part direct. Barefoot on my floor wood and ESD wrsitband on, I put in this bad boy. Double and triple check things and connections. Go to hit the power button and I get 6 beeps and 6 flashes of correspopnding of the powerbutton. The system does not appear to be on, fan is running with the other sounds of starting and running sounds, but I have a white screen and orange electric button. If I tap CTRL + ALT + DELETE it will restart and begin the process again. The 6 beeps by HP standards denotes missing graphics / card error. My original motherboard had a built-in graphics card so I thought that the same new part number card mother too. Obviously not. so I had a Geforce 2Go MXM graphics card update with heat sink. Barefoot, wood floor, bracelet ESD, thermal paste and turn it on to hear... SIX BEEPS AND SCREEN WHITE.

  After Googling around, some people say that I have to enter the BIOS and change boot legacy and fashion out of the UEFI mode that's killing me right now. I have join and would completely if I could see my screen of the BIOS, or anything for that matter. I can not go back also to my other card because it will not feed. So my question; How to make or change the BIOS settings so that my computer will recognize a graphics card or internal graphic that should be on the new motherboard itself so that it starts?

  I need this computer for CAD work soon so I thought help processor i7, 8GBs RAM, Geforce card and touch screen to perform a generation of PC.  So if someone has a great idea they would projected upward on this post, I'd appreciate it. Thank you!

  Your computer is not posting, sound rather give an error message in the form of 6 beeps and red LED flashing, indicating graphics / video issue.

  You can never get into the BIOS of the device, if its not posting, not on a HP Desktop atleast.

  I recommend, you disconnect all components and fittings connected to the motherboard i.e. cables SATA, power cables, RAM, processor, heatsink, power supply and battery CMOS as well.

  Now, press and hold button power unit for a minute or two., with the power and everything is still disconnected.

  Then,.

  (1) Insert the battery CMOS back into its slot, install the processor and the heat sink, connect all cables power that goes to the motherbaord in the PSU and CPU and etc., less SATA cable and cable power to drive hard and Optcal drive and turn on the device, of course after you have connected the rear power cable.

  (2) check if the machine beeps and check whether it is 5 times.

  (3) If yes install a memory in the first slot (slot black), connect the monitor and turn on the power and check if there is no video output.

  (4) if so, connect the return which is always disconncted, to their respective locations and ports and turn them the unit on and get on with your CAD stuff.

  IF NO,

  2 options:

  (1) if the unit is still under warranty, call 1800-474-6836 and have a technician on-site visit your place and replace the parts needed for the operational unit.

  (2) or the motherboard you purchased could have been Dead On Arrival. Get a warranty replacement for the DOA mobo and re install a new Board of Directors.

  Good luck!

  Please click on the "congratulations, Thumbs Up" at the bottom of this post if you want to say 'Thank you' for helping!
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

• Experiences of replacing motherboard

  So my new E540 boot - after that the 5th day I used it at all. All I get are two red power light. I tried a hard reset but it did not work. Call technical support first thing Monday. It's a shame as I like the computer and it took place just outside the fourteen day return window.

  This problem seems to be quite common, and almost always requires the replacement of the motherboard. So I was wondering what people's experiences were with replacing the motherboard. At they ruin your laptop? Have they worked? They have like the original?

  Thank you

  Have you tried a hard reset, semil? If so, then you and I have the same problem. It's a dead motherboard. Fortunately for me, when I checked, my laptop has been delivered and died within the 14 day window, so it fits in their 'dead' on arrival policy

  "Dead on arrival (DoA) policy."

  If a product fails warranty of 14 days of delivery, that the product is considered DoA and Lenovo will, at its discretion, repair or replace this product. Lenovo will organize and pay for a courier service to collect the original product from you.

  You should contact Lenovo Support within 14 days of delivery and must provide proof of purchase and the model and the serial number of the product.

  Please contact Support on 1800 041 267 [Australia] Lenovo technique.

  If Lenovo determines that the product is not DoA, then Lenovo reserves the right to charge you the cost of the product from collecting and returning it to you, more product inspection fees. »

  I'm trying to replace. Here are the steps:

  -Call technical support in your country and record details
  -Send your proof of purchase (and proof of delivery if sent to you) to an email from tech support provided to you
  -Will send you a dead on arrival reference number, or call tech support the next day to receive this Ref. number
  -Contact where you bought it. your retailer, in my case, sales of Lenovo.
  -They will take your laptop (because they will organize a messaging service online to look at their own expense) and send it to technical support to check it out, you can request that it be repaired or replaced.
  -They will repair or authorize a replacement and give it to you

  In your case, if it does not under the dead on arrival in Germany policy, I take it back to the retailer and require a refund or a replacement of their part ask a warranty repair is a bit more of a pain as the DoA policy. There is no reason to keep your laptop.

  If you love the brand, stick with it. Regarding changed the brand, I did research before I buy my brands and Lenovo was always near the top, and was regarded as the second behind Apple in 2013. My guess is that there is a manufacturing defect. This happens with technology, so I'll stick with Lenovo unless my replacement (when I get it) died as well.

• Satellite P35-S609: DVD burner Mat * one disappeared UJ-820 s

  I bought a P35-S609 end 2004. The DVD burner was dead on arrival. I brought back to the seller, and they exchanged the laptop.

  The dvd burner worked for the first two years and then he started to disappear and reappear, leaving events in the journal system such as pasted below. A few months ago, he has disappeared and I have not seen since. Help!

  THX,
  JD

  In the system event log:

  Event type: error
  Event source: PlugPlayManager
  Event category: no
  Event ID: 12
  Date: 26/02/2007
  Time: 05:04:26
  User: n/a
  Computer: BACK2OZ
  Description:
  The device "MAT * a DVD-RAM UJ-820 s '."

  (IDE\CdRomMAT***A_DVD-RAM_UJ-820S___1.50___\5&1cd2b8a9&0&0.0.0) disappeared from the system without first be prepared for removal.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hello

  Everything looks like a hardware malfunction.
  But what exactly do you mean by disappear? The drive is not listed in the my computer zone, or he can simply read and write media?

  However, after 2 years of work it s not unusual that the player will start malfunctioning I guess that the lens of the drive can read and write the CD or the DVD.
  So I agree with Marina4000 and it s time for a new

• Workstation Z600: card graphic Workstation Z600 error (Six beeps)

  Hello, this is my first time posting in the forums and I can't upgrade my video card. I'm relatively new to the PC upgrade, so bear with me.

  Currently, I use a HP Z600 workstation with a graphics card XFX Radeon HD 6670 1, without any problem. I have two slots for PCIe 2.0 x 16, and I've read that I should be able to also use cards which have PCIe 3.0. The 650W power supply also has a power cable 6 unique pins.

  The new card, I am using is a MSI Gaming R9 8 390, which uses the PCIe 3.0 and locations for a 8 pin and a power cable 6 pin.  When I replace the video card and you turn on the system, the repeated red power button blinks six times, each with a beep. The light on the card, but fans do not rotate, which may actually be a feature of the map in order to stay calm.

  So far, I was able to use a location for both, power cable or the 6 - 8 pins (using the 6-pin to 8 pin adapter supplied with the card). I tried the switch between the two slots (slots 2 and 4) PCIe card, but I still get the power button flashes red when turned on. I've also updated my bios to v3.57.

  I am able to start the computer when I replaced the HD6670, without the beeps. I tried to have 390 R9 also connected, but it does not appear in the Windows Device Manager.

  For me, it seems that the motherboard is not just pick up the card. Is it possible that the right card is not correctly powered and I need a power splitter cable? Have I not a card that is dead on arrival? Or is the 390 R9 simply incompatible with my system?

  I solved my problem by using the separator.

  In case someone else also try to upgrade their system gpu, it is indeed necessary connect the two power of the graphics card ports. Once, my card was required a 6 pins and a PCIe power plug 8-pole, and I used just splitters and adapters to connect to the extra cable 6 pin of the Z600.

  Beware however: because my card uses a decent amount of power, I had to underclock my card about 10% or my rig will re-start himself when running 3D applications. I read online that it can be solved if you use a separate extra, external power supply or connect to another pc supply, but I am satisfied with her downclock so I will do that now. Still, you can't replace the power supply of the Z600 because it is designed specifically for this workstation.

• Instant hard drive failure

  Hello

  I bought yesterday new laptop HP ENVY 17-j162no. The first time (and each time later) I started the laptop, I had a smart drive failure error. I have never on any known computer that even after such a mistake, nothing seems to be broken. I went to the BIOS and ran the examing tool, and you can see the results below. What is the next step to do?

  Thanks for all the answers,

  Arto

  SystemDiags.log

  2014-10-05 11:28:30 =.
  2014-10-05 11:28:30 EFI 5.4.3.0 diagnostic system has started
  2014-10-05 11:28:30 Load Options =
  2014-10-05 11:28:30 former Hii Protocol not found.
  2014-10-05 11:28:30 SysDiagsBiosData2011 Configuration variable acquired
  2014-10-05 11:28:30 pointer absolute Protocol not available
  2014-10-05 11:28:30 found HP thermal diagnosis Protocol
  2014-10-05 11:28:30 1394 controller is not present.
  2014-10-05 11:28:30 BIOS HP Image Interface Protocol Version 2.0
  2014-10-05 11:28:30 found 8 8 active processors, Max 8 processors
  2014-10-05 11:28:30 system family: = 2
  2014-10-05 11:28:30 PlatformLang reported as en-US.
  2014-10-05 11:28:30 selected language is currently (eng).
  2014-10-05 11:28:40 Player library initialization.
  2014-10-05 11:28:40 TscPerSecond = 0B374B73Ch
  2014-10-05 11:28:40 installed protocol commands ATA
  2014-10-05 11:28:40 found installed protocol commands ATA supporting Packet orders!
  2014-10-05 11:28:40 found 1 hard drive.
  2014-10-05 11:28:40 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x8198550F) to drive 0
  2014-10-05 11:28:40 found 1 optical disc.
  2014-10-05 11:28:40 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x81C9768F) to drive 1
  2014-10-05 11:28:40 ATA Total 2 records found
  2014-10-05 11:28:40 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2014-10-05 11:28:40 1 hard drive Total records found
  2014-10-05 11:28:40 1 total optical disk drives found
  2014-10-05 11:28:40 found 1 hard drives
  2014-10-05 11:28:40 found 1 optical discs
  2014-10-05 11:28:40 system model: = HP ENVY 17 Notebook PC
  2014-10-05 11:28:40 system SKU: = J1Y81EA #UUW
  2014-10-05 11:28:40 system ID: 1968
  2014-10-05 11:28:40 HDD 0 model: ST1000LM014-1EJ164-SSHD
  2014-10-05 11:28:40 HDD 0 series: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 ODD 0 model: hp DVD RAM UJ8E2
  2014-10-05 11:28:40 series 0 ODD: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 DIMM 0 serial number: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 DIMM 0 Part Number: M471B5173DB0-YK0
  2014-10-05 11:28:40 DIMM 1 serial number: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:28:40 DIMM 1 part number: M471B1G73QH0-YK0
  2014-10-05 11:28:40 BIOS revision: F.62
  2014-10-05 11:28:40 SysDiagInitErrorLog - no record found
  2014-10-05 11:28:40 BattInit: Protocol 2010.
  2014-10-05 11:28:40 from Menu of Diagnostic graphics system
  2014-10-05 11:28:50 selected system test
  2014-10-05 11:28:50 calculation time to Test memory
  2014-10-05 11:28:50 total 12533 MB of memory, Free 12110 MB (3100317 Pages)
  2014-10-05 11:28:50 trust parm buffer
  2014-10-05 11:28:50 test cases Init
  2014-10-05 11:28:50 calculated 0x000000000A9BE058 TSC ticks per MB
  2014-10-05 11:28:50 estimated duration total = 905 s
  2014-10-05 11:28:50 battery test started
  2014-10-05 11:28:50 SmartAdapter: State of the map is 0
  2014-10-05 11:28:50 number of batteries 1
  2014-10-05 11:28:50 BattResetCharger: No.0 (success).
  2014-10-05 11:28:50 BattResetCharger: n ° 1 (invalid parameter).
  2014-10-05 11:28:53 battery 0 returned 0 x 0000000000000000
  2014-10-05 11:28:53 overall result of battery = 1
  2014-10-05 11:28:53 CPU Test started
  2014-10-05 11:28:53 UDM Cpu start test.
  2014-10-05 11:28:53 features BIOS 0x001000004BF99880
  2014-10-05 11:28:53 ===========================================================
  2014-10-05 11:28:53 from CpuDiags.udm version 1.01 built March 13, 2014 15:08:44
  2014-10-05 11:28:53 init complete CpuDiags.UDM
  2014-10-05 11:29:02 test complete CPU - result 1
  2014-10-05 11:29:02 Wireless Module audit completed - results 1
  2014-10-05 11:29:02 test Board full system - result 1
  2014-10-05 11:29:02 SMART Check started
  2014-10-05 11:29:02 SMART Check completed - score 3
  2014-10-05 11:29:02 error code = 0 x 301
  2014-10-05 11:29:02 serial number: (I removed it, let me know if it is crucial to know)
  2014-10-05 11:29:02 guaranteed Start Date: 04/10/2014
  2014-10-05 11:29:02 WarrantyIDString size = 60
  2014-10-05 11:29:02 guaranteed ID = 94NH4J-78M78N-MFGH7F-60FW03
  2014-10-05 11:29:02 path of unity: PciRoot(0x0) /Pci(0x1F,0x2) /Sata (0x0, 0x0, 0x0)
  2014-10-05 11:29:22 completed Test System
  2014-10-05 11:29:24 path of unity: PciRoot(0x0) /Pci(0x1F,0x2) /Sata (0x0, 0x0, 0x0)

  And here's the SystemDiagsCeeHistory.log:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Dear customer,

  Welcome to the Forum from the HP Support

  Thanks for posting your question on the Forum of Support HP

  I would like first of all to appreciate your effors to solve this problem with your laptop

  I'm really sorry to hear that Your ' e not able to boot into the operating system with your new laptop. I understand how

  He feels when things doesn't work sometimes

  This is to inform you that I have are passed through the error report and did an analysis to arrive at a conclusion. According to the analysis I did the error you posted means 'hard drive is defective or is not & should be replaced '.

  I think the laptop is within 30 days of the date [the Date of the invoice /] you purchased this device. If your answer is

  Yes, this device will be considered dead on arrival and you must immediately contact HP Support by phone for further assistance immediately to get your Notebook, replaced by the Point of sale or directly by HP

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Problem with my new HP Pavilion TS 23-F202IN

  I don't know what the right forum? I checked that this reading All in One is only printers or also for all in a desktop PC?

  I just unboxed it today and now the first problem I faced...

  The keyboard and the wireless mouse do not connected possible fault in the USB receiver that displays no lights when it is connected to the computer... I tried to connect to all the PORTs and the receiver receives no LED light on it so is not conenct to the mouse and the keyboard, even if I keep the button connect, supported on the mouse and the keyboard. The mouse lights are turned on but it does not sync with my PC... I tried to call the HP support center here in INDIA that is not 24 hours, even if they announce it comes 24 hours support... no one answered it because their working time is from 09:00 to 18:00 so sick!

  Then I went to the HP site and followed the link to support that asked me my HP product number and serial number and then there was a link to cat technical support when I went through the cat asked the Executive he tried to solve problems and then when there probly came to a conclusion when he said he would send me a new mouse and receiver it asked me my address at the hearing, I am of the India he said that he will transfer the Chat to an Indian executive support, who came to ask me the same questions, then he told me it is a consumer product, so I need to talk to voice Support team and I could not help on the CHAT! How irritating is that... I have a printer HP ever made a problem with it... and this system has a value of 64 990 /-INR which isn't a small amount and it is the kind according to the sale, I get...

  Is he one of the support here for the response team and address this issue?

  There is also a cat Hillarious records I have if someone wants to read... I'll upload the picturesque images my serial number and address.

  
  Im a developer of Windows applications

  OK after almost 10 calls back to the HP Helpline, Station of Service HP, HP support line... Finally, I got a new keyboard, mouse and Receiver USB keyboard doenst look alike as it came with my system then obviously, it's just another keyboard HP wireless which is brought... they were just trying to buy time by saying that the keyboard is not available and other stuffs... slightly bad experience but finally the problem was solved...

  My only comments to HP India support would be

  (1) CHECK THE QUALITY OF THE PRODUCT THAT YOU SHIP BEFORE YOU SHIP TO THE CUSTOMER)
  (2) if one of the devices are dead on arrival, take the question on a priority support and fix before 48 hours.
  (3) notify your tracking service center and update the client on their case instead of them calling you 10 times.

  Thank you.

• Revolve 810 G2 Executive pen does not work

  Hello

  Revolve 810 G2 / Windows 8.1, all updates (Microsoft and HP) are carried out.

  Pen is not recognized. I can't find any driver associated with feather on the HP page turning G2.

  What I've read, the Pen 'pen tablet HP Executive R1' reference must match a G1 not turn a G2.

  Is this correct?

  Although this pen would work with a G2 810 or pen is dead on arrival, or a driver issue?

  I read a lot about the customers disappointed on the pen of the revolution, when they compare themselves to the generation 2740.

  G2 solved this?

  Thanks for your help,

  Jean-Jacques

  Please see the troubleshooting of pen and calibration

  http://www.HP.com/United-States/HP-Executive-tablet-pen-whitepaper.PDF

  Replace the battery

  For the G2 to test the new PEN

  HP Executive Tablet Pen G2

  "Write messages and notes in your own handwriting directly on your HP EliteBook turn 810 G2 [1] screen.

  http://h30094.www3.HP.com/product.aspx?SKU=10754734&mfg_part=F3G73AA&pagemode=CA

• How can I create an object for the vista HP 64 bit operating system installation disc?

  My PC shows signs a failure and I want to save my 'operating system', so I can "reinstall it later." Everything I saw in the forums are just consider my manufacturer. My Builder can not handle make me backups. I had to send them back 7 DOA (dead on arrival) and they never gave me a working copy. So in the end I just receive a refund. and geeksquad is way to expensive. so, how do I go about creating a disc of resettlement?

  Also the backup center and repair is more than the option to backup my operating system.

  Hello

  If you have a recovery disk partition hard HP are the people to contact about this

  It's their recovery partiton not microsofts

  and they have their own special way to make the recovery partition recovery disks

  If as you say your backup centers is not more work you can use 3rd party software to make a complete picture pc

  http://www.Acronis.com/homecomputing/products/TrueImage/

  or if you just want to reinstall a new copy of vista, read this:

  borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  then get the hp vista drivers

• Error message C8190014 to the FIRST boot of the NEW HP Officejet Pro X576dw

  Hello, a few minutes ago, I tried to install a brand NEW HP Officejet Pro X576dw (out of the box) for the FIRST time (it is not my FIRST printer installation!). Of course, I followed detailed procedures. When I pressed 'Start' I've seen for a very short time the first image on the screen where I have to choose the language, but before you make a choice, I get a bluescreen error mentioning C8190014 and after a second, I get a screen where all the icons are flashing and message: close and re-launch your printer.

  The process of re-starting organizes not anyhting!

  Help! And thanks in advance.

  Solution: you call HP support , your printer is considered DOA (dead On Arrival) , you get a credit note , return you the printer (at your own expense) , and you buy another (you pay once more transport) !

• 0x6100001d on photosmart AIO 6510 e ErrorCode

  When the printer starts, the "printer 0x6100001d error" message keeps appearing.

  What can I do to fix this?

  I tried the option reset, but without result. I contacted customer support HP here in Belgium and they offered to return the printer to the store and ask for a new. The seller agrees with this, and now everything works fine. Apparently, the first printer was DOA (dead on arrival).

  Conclusion: If the printer returns code 0x6100001d, it is a serious problem with the hardware.

  Thanks for your reply.