Tecra A4 noisy display card

Similar Questions

• Tecra S11 - hotkey display screen rotation

  Hi all
  I use a Tecra S11 with Windows 7 64 bit.
  By pressing "Ctrl + alt + down arrow" my screen rotates 180 degrees.
  Unfortunately this shortcut is one of my favorite hotkey in Eclipse, so I have to disable the shortcut of display rotation.
  After a long search I haven t found a solution.

  does anyone know how can I disable the shortcut of screen rotation?

  Thanks for the tips

  Concerning

  I put t know exactly how to do this on your Tecra, but this option must be available in the Advanced display settings.

  Also graphics card settings check (for example the NVIDIA settings).

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Tecra 9100: Circle sound card - yellow in Device Manager

  I have a Tecra 9100 using win XP pro SP2. Recently, my sound disappeared, and I use the card his Yamaha AC - XG. The unit displays a with a circle yellow exclaimation mark. I tried to use the help to solve this problem, but still works cant, also tried to download the drivers to date but did not help either.
  Is it possible to fix this problem.

  Hello Bernard

  I have the same unit pre-installed with Windows XP Home SP2 edition too and I installed the audio driver Yamaha 6.13.10.2152 version and it works well.

  Test if you wish.

  Good bye

• Tecra 730XCDT size display - possible to repair problem?

  In 1024 × 768, the screen is full, but change to 800 × 600 and 640 × 480, the visible screen shrinks a bit and drastically in that order. Is it possible to get a screen resolution less than completely fill the display area?
  I already have the BIOS to stretch the text, but there is no parameter to stretch the graphics.

  If anyone has had this work, they can send me the name of the driver file, and I'll hopefully find somewhere to install it?

  Sorry mate but could you please start with some details by providing more information about your model Tecra and preinstalled Windows system?

  The XCDT series seems to be old and I mean very, very old post so not quite sure if the community would be able to help you, however, please the information required above.

• Tecra R950 - 16L - display sometimes dark rest under tension

  Hello

  I have a Tecra R950 - 16L for about 3 months now, everything works fine. Since a few days, I now the problem that sometimes, especially after I transported the laptop before, the internal screen is black after that I turn on the laptop.

  Blindly, I can type my password and see the disk activity that windows probably begins, but none is displayed.

  After I move the laptop and shake a little sometimes it works again and the computer remains work until I move the laptop again (at least this is what seems to make the effect occur).

  Seems to me like a connector loose on the screen or something like that?

  Is it possible to fix this on my own?
  I need my cell phone all the time and do not want to send it for repair if it is not not 100% necessary.

  What do you suggest me?

  Michael Czierwitzki

  > Seems to me like a connector loose on the screen or something like that?

  Yes, it seems that there is a bad connection or maybe something wrong with the sensor cover.

  > Is it possible to fix this on my own?
  I don t think so.
  You would need to check what's wrong exactly. Once this has been verified, you would need to disassemble the laptop and it's not easy. Finally and above all you need compatible parts to replace the affected hardware I put t would think that you can do

  > I should I my laptop all the time and do not want to send it for repair if it is not not 100% necessary.
  Well, you could ask the Toshiba authorized service provider for details and how long such repair would take.

  You will find here all the FSA all over the world:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Tecra S1, no display with beep sound

  My Toshiba Tecra S1 is having a beep.
  Two short beeps then a Long beep after 1 s 3 short beep.

  All ideal. Thank you.

  Google says-> 1 long, 3 beeps = error display adapter.

  unsecured ;)

• Tecra A9 - LCD display very Dim

  Hi all!

  My Tecra A9 age of 4 years has recently developed a problem with the screen. While using it, I heard a zap and the cut screen. He has not worked since. I was able to plug it into an external to continue monitor to use it even if.

  But I found that the screen is not actually dead, its just very dim. If I look closely and shine a torch above, I can see what is on the screen. Which leads to believe me its something to do with the backlight of the LCD screen.

  Also, I checked, and this isn't a problem with the sensor thinks the lid is closed.

  In any case, I would like to know if anyone has an idea on what the problem is specifically? If so, is the kind of problem that I can fix myself or do I need someone from Toshiba to do for me?

  Thank you!

  Hi Matt89,

  I agree with Akuma. If an external monitor works, it looks like that the FL inverter is faulty. This inverter controls the backlight of the internal display and even it would be defective you can see the picture but very very dark.

  If think the best would contact an authorized service provider. Guys can order a FL original inverter which is compatible and replaces it for you because the screen itself must be dismantled, and that's not easy.

  If your laptop isn't under warranty gift more worry because FL inverter is not so expensive. :)

• Tecra M5 NVS graphics card adapter

  Hello

  My question is simple: can I change my Tecra (NVS 110) with an another NVS graphics card?
  If "Yes" how?

  Any help will be apreciated.

  M

  No, you can not replace or upgrade of the chip of the graphics card.
  This is not possible because the graphics card chips are not extensible parts.

  You should check the FAQ here box in the forum.
  I found here a nice article that explains it.

  The technology of the laptop is simply different and in most cases only the common areas like RAM or HARD drive can be improved.

  Cheers mate

• Tecra M3 dark display, checked the usual problems

  Hello

  My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

  If haven't tried a new cable from the screen, no difference and a new inverter, also no difference.

  Sometimes if I switch between views (Fn + F5) I can get the display works fine, but as soon as the screen is turned off for some reason it won't once again.

  I also re-greased the heatsink on the NVidia chip.

  And I checked the backlight by plugging a converter working on another laptop.

  I have a M1 and there is a relay type sound when something has changed on the screen, I can't remember if the M3 never makes a similar sound, even if I used it for about 5 years.

  I also saw that he suggested that he might think that the cover is closed, I don't know how the M3 detects that the lid is closed.

  Any suggestion or help would be welcome.

  > My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

  This means that the graphics card chip was Ok, which means that it could be a display problem
  I doubt that it ups s related question. If FL inverter would be defective, then you'd see everything on the screen, but everything would be visible behind a thick fog.

  Of course, it s that my personal opinion and nobody would be able to tell what dysfunction part without running any hardware, test procedures
  Then maybe you should ask a support technician

• Tecra M2 - update VGA card

  Hello
  How are you?? I have toshiba tecra M2 and it's a real neat machine, I was wondering what can I upgrade my 64 MB graphics card 128? and also the speed of treatment?

  Thank you
  Maïwenn

  Hello

  As much as I know this notebook applies to a graphics card nVIDIA GeForce FX Go5200 with 32 MB or 64 MB of video ram. But you cannot upgrade the video card or the speed of the CPU. The only thing you can do is buy devices such as hard disks in option or memory Modules.
  For more information, you can try to contact the service partner.

  Good bye

• Tecra S10 - change graphics card

  Hello

  I hava a Tecra S10 and it's a good computer. The only thing I would change is the graphics card. I have a Nvidia Quadro NVS 150 M and I would like to know if it is possible to change it to another. I wish I had a better game experience.

  Good day
  Thank you

  Hello

  I think that this article is right for you
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZW0007R01.htm

• Tecra A5 and SDHC cards

  Hallo,

  the Tecra A5 SD card reader supports SDHC cards?

  Best regards
  Volker

  Hello

  I can't answer your question, but I found info about the maps compatible and tested on Tecra A5. It may be interesting for you:

  SmartMedia No. voltage - carrying capacity
  Card SD Yes (supported by 5-in-1 slot) capacity 8MB - 1 GB SD - IO No. (to be determined)
  Mini SD Memory Stick Yes (supported by 5-in-1 slot) capacity 8MB - 256 MB Magicgate No. MemoryStick Pro Yes
  MemoryStick Duo No.

  Bridge Media slot Yes
  Support Media Type SD Card, xD picture card, Memory Stick, Memory Stick Pro,

  Ability of MultiMediaCard
  SD card 8 MB - 1 GB
  4 to 512 MB xD Picture card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256-1 GB
  8 to 256 MB MultiMediaCard

  I do not have Tecra A5, but you can test only if it works.
  Please post the results. It may be useful for other owners of Tecra A5.

• Tecra A4 - ATI display driver problem

  Hello I have this problem in my Tecra A4 Display driver, the mobile hangs and write this journal in Nevada Viewer:
  Event type: error
  Event source: ati2mtag
  Event category: no
  Event ID: 108
  Date: 02/07/2006
  Time: 15:06:32
  User: n/a
  Computer: QUIMERA
  Description:
  The ati2dvag driver for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a problem with the device itself or with the incorrect programming hardware device driver. Please check with your hardware device vendor updates the driver.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 00 00 00 00 03 00 52 00... R.
  0008: 00 00 00 00 6 c 00 04 c0... l... TO
  0010: 00 00 00 00 00 00 00 00...
  0018: 00 00 00 00 00 00 00 00...
  0020: 00 00 00 00 00 00 00 00...

  all the solutions for this?
  Thank you

  Hello

  Try to install the latest driver.
  See this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Tecra M7: Vista display driver (NVidia NVS110)

  Hello!

  I was wondering if someone else encounter the following issues, which I believe are linked to the display driver.

  1. black screen after the release of the mode standby (no hibernation). The solution I found is to close and reopen the lid (assuming that you have not any operation assigned to closing the lid). But it's really "fun", this back when you are in tablet mode.

  2. the other - that I just found-seems more serious. I can't get the external VGA connector to work. Even after setting up so I can see an office empty on the other monitor, just move any window on the desktop results in a mess on this screen (as synchronization signal is lost or something). And it is with a single monitor, while my other one does not recognize the signal at all.

  Has ANYONE else try to use the external screen on Tecra M7 on Windows Vista (32-bit)?

  The latest Vista driver available for this laptop is 98.13 version, while the latest ForceWare is 100,65 (stable since February). I found some info that the first problem I described is a known bug in the nvidia drivers, and it has BEEN fixed in this version. Unfortunently this driver package from NVidia does not support the NVS110M. When can we expect Toshiba to make the point?

  I had the same problem with the external display. I solved it by downloading the latest version of the BIOS (v3.2) on Toshiba Canada website. It was a bit of a risk, as the model numbers are different, but I can say that it fixes this problem and I can now work with external monitors very well.

  Mark