Volume + switch

Similar Questions

• What to do when ipod touch volume turns down by itself

  iPod touch 5 has started to turn down the volume in itself the sep 11.

  I have already restored like new, it did not work.

  Today it didn't turn... so I decided to connect it to the PC... I opened ITunes and you press the power button and open a whole... it turned on.

  Open ITunes window saying there was a problem and it should be updated... If it did not work it needs to be restored again.

  What should I do?

  I tried to make an appointment at the Genius Bar, but so far nothing

  Thank you

  -Do you have a case on the iPod that could be turned on the switch?

  -Is what the volume switch/look stuck?

  -If you have restored the factory settings successfully / new iPod via iTunes that indicates a hardware problem. Try the Genius Bar

• Button Sansa Clip Plus Volume increases no volume decreases only

  Hello

  I hat managed to install the new firmware hoping that solve this problem. Unfortunately no luck, reset to factory settings only allows me to decrease the volume, but not increase it. If I decide to turn down the volume I can't unless I have resett to factory settings find volume...

  In short, I think that the volume button is broken because when I push it decreases but does not increase, never... My camera is only 6 months old and it is not good. :/

  Any help?

  Contact SanDisk directly on a replacement under warranty. There has been a few people who have had problems with the volume switch.

• On HP DV9000 (DV9700) volume slider does not work with Windows 7

  There is not too long, the volume button, next to the volume on my laptop cursor no longer works.  After reviewing the comments I found, has been able to adjust the volume switch number, by shutting down the PC, unplug and remove the battery and put again.  I still can't get the volume slider to work!  I can go in the audio mixer and volume control, but it would be nice to make it work again.  I had this problem with the original operating system (Vista) and have upgraded to 7 Ultimate and it still continues.

  I found the solution me!... I installed the software of quick launch (because it isn't a Windows 7 post yet, my old OS is Vista Home) and it worked!  My volume slider works, as it did before!

• There are three applications of volume control? Which one?

  I'm looking for a new application of volume control.  There are three applications, its named aptly (like a good play on words) of the volume.  I know that several people have recommended an app called volume control, I don't know which!  I downloaded RingGuard, but it is not stable.  Doesn'r always my ringtone.  When I think that I have the volume up and all of a sudden, I look down and it vibrates on the desktop with no ring but a happy face watching me upwards!

  So, I thought I'd try the volume control.

  It turns out that RingGuard works very well on the phone from Linda.  She is missing calls because another application has set the volume to 0.  RingGuard no is not asking to confirm when he sees the volume has been set to 0, and 'ringtone mode' is 'normal' instead of 'silent '.  You can get this combination through the volume switch, so RingGuard know.

• When I click check updates I don't get a message just the icon of thought and then nothing

  I have version 1.0.1 and I want to improve. The reason why I did not yet is because I recently bought second hand phone. But I'm unable to update and what's happening is the circular icon indicating that something is happening shows upward, then disappears and there is no message was updated. If I can't update, is there another way to upgrade the browser because I can't use it properly at the moment.
  Thank you

  Something is lost in translation. Unzip the package. Copy the zip (inside the folder that you have just unpacked) file to the root of the SD card, renaming it "update.zip". Then apply by starting the phone into recovery by now the volume switch mode up everything with power.

• My Hp Slate Tablet Wont turn on HELP!

  I recently bought a hp slate 7tablet 2 days ago and its doesn't turn is not on. As I put it to load, but it won't turn. I tried to load it into a different power outlet, but nothing happens. I know for sure the plugs work fresh body of my mother her phone to the Jack of all I tried pois it you PLEASE someone TELL ME HOW TO TURN IT ON AGAIN!

  Try to keep the power, volume up and volume DOWN all pressed at the same time for about 20 seconds (or until you see a menu appear).

  If you get the menu, navigate using the volume switch then select "Reboot".  See if the Tablet starts normally.

  In addition, if you have another convenient micro-USB cable, try using it with the charger supplied with the Slate7.  It is possible that the original cable have been damaged.  Do not use a cell phone charger because they are not able to provide enough "juice" for the Slate7.

  WyreNut

• Satellite C660 - ESC key no longer works

  Hello

  I have a question about ESC on my Satellite C660. I am very pleased with the laptop, but what bothers me is that from time to time the ESC key works. If I restart the computer, it works again. In addition, the volume switch function (FN + ESC) works, so I don't think it's a hardware problem.

  I don't know if there is a combination of keys secret to stop the ESC, work that I press without knowing, or if one of the own programs of Toshiba manages the operation of the key.

  Can you help me?

  Thank you!
  CK

  Hello

  If someone has done test this using an external USB keyboard?
  Otherwise, do it because if it would be a related issue of BIOS, the external USB keyboard ESC key should not be working too

• Satellite 1730 - sound card problems

  Hello world

  I have a Satellite 1730 supporting his Crystalsound Fusion card.

  After using the recovery for any other problem disc, the sound card does not work. Everything looks OK (Device Manager detects the card; there is no conflict ever), but while the audio of the executed file, I have no sound from the speakers (they are not on mute selection).

  I also download the provided driver CD in the computer, with no result. Please advise me. Thank you

  Hello

  You also checked the volume switch. You will find it on the side or the front of the laptop.

  You should also check if "Mute everything" is enabled in the sound properties!

  Bye Bob

• Satellite P775 program-S7230 - after installing Win8 32 bit, keyboard collapsed work

  Can someone please help?

  I installed Windows 8, 32 Bit, as a clean install.
  Used Toshiba Wizard and everything went well until the second day when I turned on the laptop
  The keyboard is not all the essential features.

  I plugged a Logitech keyboard and wireless mouse, functions such as DVD, Volume, switch & worked, the rest of the key traits does not save.

  F2 & F12 function keys does not work so I can't get into the BIOS settings.

  Can anyone suggest a solution?

  > F2 & F12 function keys does not work so I can't get into the BIOS settings.

  This has nothing to do with the system installed.
  If you are not able to access the BIOS because the "F2" does not work, then it means that the material of the keyboard is not recognized by the BIOS / laptop.

  In this step, windows drivers are not responsible for the keyboard because at the BIOS level (by turning on the unit in place) the system is not loaded so it cannot be a Win8 problem or other question of system, it looks like a hardware keyboard problem.
  I think that it s just a bad luck that it happened shortly after the installation of Win 8

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard slim pro F # Dell place 11

  It seems that the slim keyboard function keys are priority on the F keys # (F1, F2, etc.). So for example, if I press the F1 key, it will switch volume switch instead of appear in menu "help" in the programs. In order to trigger the function F1 in the programs (for example to open the Help menu), I have to press the Fn key and F1 key at the same time. And this type of behavior applies to all keys F #. Is there a way to reverse the trend so that the F-keys # work when they are in a hurry, and the 'function' keys require pressing the Fn key?

  I'm on the place of reference dell I3 7130 11 pro with slim keyboard (without batteries).

  Posted bytimebend on September 12, 2014 16:35

  OK, here's a possible solution, I came up with that. It is not perfect, but makes this device more usable for me at least: http://timebend.com/venue11fix

  + 1 for this fix. In fact, I like to have the brightness of the screen (F11 and F12) does not and all the rest (F1 - F10) fixed.

  Run the .exe don't require or even request administrator rights. Until there is an option in the BIOS, this .exe will be later in my startup folder!

• Z10 Z10 BB blackBerry won't boot to the top

  Charged my z10 all night then in the morning that there was only one red light on the upper right side.

  Disconnected the usb charging cable (I was loading via the wall jack and not a pc) and the light goes out, but it won't start.

  Connected to a pc and just suite and every few seconds, he's trying to start because I see the words 'blackberry' lights up for about half a second, then it turns off and the Red led will return to red light.

  Software link BB confirms that the device tries to connect but disconnects...

  Any suggestions?

  Disable bb software link, use "check for updates" and run it while the camera is connected via USB.

  http://CA.BlackBerry.com/software/smartphones/update/blackberry10-OS.html?CPID=van:BB:Jan2014:vanity...

  You select device and follow the instructions... When you are prompted to turn off the device, you may need to use the power button or the HIGH to the LOW volume switches to turn on the lamp unit out... Green must appear on the device... it took me several attempts to make it work, but it works fine now... thank you all for the help.

• Need to switch volume for Satellite U200

  Where can I get a new switch for volume control for a PLUA1E-00700JEN?
  I don't want the full jury only the switch.

  Contact nearest authorized service provider. Call and ask if they can order this small part for you.
  You want to exchange it only?
  Have you already taken apart your laptop?

• keyboard volume and switch control wireless - HP Pavilion Entertainment Notebook

  My volume control keyboard & wireless switch (to touch those at the top of the keyboard) has just left the other day of work. I can't understand how do I know if I disabled something accidentally or what. Reset did not help. The only thing I did differently this day was to connect my laptop via a cable and stops the wireless. (I usually work wireless).

  Laptop HP Pavilion dv6-2157sb

  Windows 7 64 bit

  Thanks in advance for any help.

  Hello

  Problems with the capacitive band can sometimes be helped by doing a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K