Guest account cannot be changed from Administarator or impossible to create new accounts.

Similar Questions

• Error downloading ' ID package cannot be changed from the previous version.

  I have an app on the App Store created with DPS, simple editing of long date, shortly after SE DPS became available. Now, I've updated the app, built a new version with DPS App Builder, created a new version of the app in iTunes Connect and tried to download the Distribution zip file using the application loader. I am getting 2 error messages:

  "This package is not valid. Cannot change the identifier of the bundle of the previous version. If you want to change the ID of your package, you will need to create a new application in iTunes Connect... »

  and

  "This application contains an embedded profile of provisioning that is not associated with your account. Please use a configuration profile associated with the team ID... »

  I did this several times before with other applications and never had these errors before. Any ideas of what's going on?

  I am able to view the file API Developer very well on my iPad.

  Too bad. I left for lunch, returned, took a new look at it and discovered that it was a stupid human error on my part.

• ITMS-9000 error: ' ID package cannot be changed from the current value,...» »

  I get this error of application loading multifolio with the application loader that comes with xcode (version 2.9).  I searched on this and cannot find that maybe that's a problem with Apple.  Has anyone seen this and resolved?

  This is because you created a .mobileprovision file that has an id different bundle for your application in and then tried to download on an old application. Change the id of the beam back and regenerate your .mobileprovision file or download with the new beam for a new application id in iTunes.

  Neil

• Phone Pswds cannot be changed from TUI or SA

  I'm under Unity 4.0 4 with Domino for Unified Messaging. The situation started when a user could not access VM through the TUI, kept getting invalid pswd. I tried to reset pswd of HIS page, but the change is not save. Have tested multiple accts users who can access their VMS via the TUI, but nobody can change their current pswd. Any ideas? I can't even remove the user for re - add.

  Check the logs of the app warnings or errors. Post if you have one for the time that you tried to change the password.

• Cannot copy files from the old hard drive to new

  Original title: crash and recovery of hard drive problem

  My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

  Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• BlackBerry Smartphones get my email to change from my old Blackberry to my new Blackberry Curve

  Help please, I got a new blackberry curve of work to replace my existing blackberry, I managed to copy my contacts but have had no luck with transfer on my e-mail or my conversations earlier by text ANY IDEAS please?

  Hello and welcome to the community!

  What is BES? If so, please see your BES Admins for assistance.

  Otherwise, please see the capabilities of the various methods to switch of the device:

  • KB05421 What is the switch device Wizard
  • KB23677 How to change device using BlackBerry Desktop Software

  Good luck!

• Photoshop (20151209.r.327 x 64) CC (10 Windows) cannot change the width, height or resolution creating new file

  When I started Photoshop CC (20151209.r.327 x 64) (Windows 10) and create a new file, I can't change the width, height, or resolution.

  I tried to reset the settings of Photoshops (Ctrl + K-> reset settings) without success.

  Any ideas?

  Concerning

  Simon

  SystemInfo:

  Adobe Photoshop version: 2015.1.1 20151209.r.327 2015/12 / 09:23:59:59 CL 1055659 x 64

  Operativsystem: 10 64 bitar Windows

  Version: 10 eller later

  Systemarkitektur: AMD Datorfamilj:15, Modell:1, Version: 2 med MMX, SSE-heltal, SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX FP

  Antal processorer fysiska: 3

  Antal processorer logiska: 6

  Processorhastighet: 3311 MHz

  Inbyggt minne: 8094 MB

  Ledigt minne: 4389 MB

  Minne having for Photoshop: 6973 MB

  Minne som anvands av Photoshop: 70%

  Basic but often made mistake, tried restarting your computer?

  Try it once and see if it still works very well.

  ~ Assani

• Cannot change the guest account group

  Long story short.  The guest account is somehow in the Administrators group.

  I use Windows Vista Home.

  When I am logged into the guest account and I look under the name he said administrator.  I'm going to change the type of account, it shows that it is in the standard group.  It won't let me even change for the management group.  It is in the Administrators group or what?  READ MORE that it gets better.

  When I'm on the command line and I type net user comments he says that membership in the local Administrators group.  Now, here's what I don't understand.  I do net localgroup guests comments / add and it will add to the guests group, and it is then in the customers and group administrators.  I can then do net localgroup guests comments/delete and it deletes it.  Now I CANNOT net localgroup administrators/delete comments because he says that it is not within the group, BUT if I net localgroup administrators comments / add that also says that he cannot do it because it's already in the Group?  That continues.  A I royally mess up something or it's a certain type of problem?  Please help me.  Thank you

  Hello

   

  Do the following and check.

   

  Check in the user management

  a. Click Start, type "Edit users and local groups.
  b. click on 'Users', which is located on the left side
  c. right-click Guest, and then select Properties.
  d. go to the Member tab, select the administrator group, and then click on remove.

   

  It will be useful.

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• You cannot change the settings of UAC with the guest account

  adadadsadadsada

  You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.

• Cannot change the guest account to admin account type

  Original Tilte: can not replace access admin comments

  Hi I have some problems with users. The guest account has admin access, I tried to change it, but it won't work. I want comments removed admin.
  Here is a video that I'm having the problem.

  http://www.YouTube.com/watch?v=mYzgBKwSERY

  Hello
  1. don't you make changes on the computer?
  2. what happens when you try to delete the guest account administrator rights?
  3. do you receive any error messages?

  Step 1: Perform a virus scan by using the Microsoft safety scanner
  Microsoft safety scanner
  http://www.microsoft.com/security/scanner/en-us/default.aspx.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Step 2: Remove administrative rights
  a. Click Start, type user accounts and press enter
  b. click on the guest account, then click on change the type of account and change the account type.

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• How can I recover the files deleted from a guest account?

  Original title: account file Lost comments

  I'm looking for a file that was created under a log of comments in... Looks like my son English newspaper is eliminated when it disconnects...? Help, please!

  Hi John,

  I suggest you log on to the guest account and check in the trash.

  If the file is not present in the trash, then he must have been permanently deleted.

  You can search your favorite search engine to find any third-party software to recover deleted files.

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps

• Installed NEWSid, restarted, now I am obliged in the guest account and can't make admin account or change the guest account.

  I had to run NEWSid due to software, I bought and installed (Stardock Objectdock) and required me to restart. Upon reboot, I had the guest account and couldn't change little matter what I tried. Here are things I tried.

  (1) goes UAC and by creating an account admin, but when I put a name in the name field, it tells me I have the invalid text when I do.

  2) restart in safe mode to create the Admin account or change the parameters of control of the accounts in this way and the same thing happens as a #1.

  Reinstall Windows Vista Home Basic 64-Bit 3) compared to the original, which does nothing to help.

  After research, I learned that using NEWSid with Vista causes this problem a lot, but the only solution I found is to use a recovery system disk (the only disc that came with my purchase of the computer has been the Cyberpower restore disc that contains only Windows Vista Home Basic 64-Bit.

  I am at a loss what to do, what I'm in the guest account and can't get out. System Restore did nothing as well until I reinstalled Vista. When I tried to run the system restore, it told me the Volume Shadow service was not working, but as part of the services, it has been set to automatic.

  Hi Rizzano,

   

  Welcome to Microsoft Answers Forums.

  If you are unable to connect to the administrator account, you will be unable to make changes on the computer by using the guest account.

  I think you did an in place upgrade which means it replaces the file system and makes no changes to the user account.

  You try to activate the construction in the administrator account and check if it works.

  If you are able to connect on windows first try to create a new administrator account.

  To activate the built-in Administrator account, follow these steps:

  
  1. click Startand type cmd in the Search boxof start.
  2. in the list of search results, right-click Guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  5. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.
  6. type exitand press ENTER.
  7 log off the current user account.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

   

  If the steps above does not resolve the question suggest that you try to restore the system from the mode or using the disk safe.

  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:

  1.	Insert the installation disc into the disc drive, and then start the computer.
  2.	Press a key when you are prompted.
  3.	Select a language, time and currency and keyboard or input method, and then click on Next.
  4.	Click on your computer repair.
  5.	In the System Recovery Options dialog box, click the operating system you want to repair, and then click on Next.

  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created before the problem occurred.

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• Unable to print from the guest account

  I have 5 PC's set up, the HP versions all the same.  All are running Win 7 Home Premium.  One of them, I can't print from the guest account.  I can print fine to the account Admin

  The printer is a network HP 1505N printer.

  I checked the Security tab & permissions - everyone is put to PRINT.  The printer appears in the list, but you cannot print to it (the "print" button is grayed out).

  I tried to remove and reinstall.

  If I'm going to troubleshoot the printer, I get "year error occurred while troubleshooting."

  The only AV/Firewall program running is Microsoft Security Essentials.

  Still, this is only a single 1 PC 5.  Help, please!

  Screenshots:
  http://imgur.com/yq9uY.PNG
  http://imgur.com/3r0z7.PNG

  Hi docsmody,

  Please see the following link for a post with a similar problem and the possible difficulty:

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/8e7c5cec-697d-4c12-a7cf-ad8920edf67a

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think