Guest operating system fails in VirtualBox

Similar Questions

• Is it possible to install multiple copies of Windows 7 in Virtualbox as guest operating system

  Hello

  My laptop runs on Linux OS, I installed VirtualBox. Now, I would like to install multiple copies of Windows 7 on VirtualBox as a guest operating system.

  Is this possible?

  My activation will expire after 3 installations?

  What are the limits in this situation?

  Microsoft treats several facilities in VirtualBox (as guest operating system) as a single installation instance? I think that the hardware (motherboard) is used as a fingerprint to detect changes in the systems, but as the material is going to be the same custom installation will be treated as a single instance?

  Help, please...

  Thank you

  one

  Hello

  There are not 3 installs with 1 license

  A Windows license is for a single installation, and this includes in Virtual Machines.

  See you soon.

• As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. Because of this issue, can we use RHEL 5.7 as guest operating system?

  As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. There is no rejection of STAF for RHEL 6.

  Because of this issue, can we use RHEL 5.7 as guest operating system? If so, it will lead to problems when VMware Certification?

  Seems to have been solved in WB 3.0.1

• T of what guest operating systems will start the VMware Support for EFI?

  Is there a list of support guest OS for the EFI firmware?  Mianly supported by VMware - do not try, fail, call support technique etc etc.   My experiences on the TP forums, I guess that there is not.  Some OS (such as Windows Server) come with a screen to choose BIOS/EFI firmware.  If not, you need to go to setting > Hard Drive OPtions-> advanced _ > boot using EFI.  In particular there at - it versions of Linux that you give you option of BIOS/EFI firmware before the confutation of VM is complete, so the hard drive then be custom.

  We will officially support the EFI firmware for any guest operating system to which all the following conditions are met:

  • We list this guest operating system, supported in the VMware Compatibility Guide for operating systems and your virtualization product.
  • The guest operating system supports EFI in the operating system installation media.
  • Support the guest OS EFI has no catastrophic flaws (for example Fedora 12 x 64, FreeBSD 11, Centos 6.0 through all the 6.2 have catastrophic flaws).

  New computer virtual assistant of 11 workstation has only the option of EFI firmware for Windows clients.  Special mention, do not yet support us Easy Install for non EFI customers in 11 workstations.  For all other customer support EFI OSes, you can do a manual installation after choosing the EFI firmware in the virtual machine settings > Options > Advanced > Boot with EFI instead of the BIOS.

  I don't understand your concern about the personalization of the hard drive... Could you elaborate?

  See you soon,.

  --

  Darius

• CPU pegged at 100% in the guest operating system

  Hi all

  New to this forum, so I hope I'm posting in the right place. Note that I'm not our VMware admin, but rather, I have a server I have to admin that has been converted to VM via the P V. apparently process, our group has converted nearly 50 PMs successfully and of course one of mine is the only one who has a problem now. We have a custom application that has been developed to synchronize data between ESRI GIS and databases SAP. The code is about 7 years old and runs on a version of Oracle (9.2) and is Java based, both on the same vintage. It is not possible to upgrade by the creator going out of business and not having is not the source code. I ask this to understand that the problem is probably with the programming, but thought it was worth it.

  Anyway, one of our guard batch process fail with a Java out of memory error on the virtual machine. It works well on the PM. A consultant ran the diagnosis with a Profiler memory on the virtual machine and concluded that the program never went beyond 256 MB and we have 1 GB allocated to the guest. We now consider the CPU issues. The only other thing we know is different is a matter of hyperthreading (HT). The PM is certainly HT'd (1 physical CPU showing that 2) and it does not appear that this setting met on the virtual machine. When you run the package on the PM, we see 2 CPUs in the Task Manager, and neither hits 100% for more than a few seconds for the whole process. On the virtual machine, we see a flatlined CPU and it is 100% most of the time until it fails about 15 min in.

  The sysinfo on the virtual machine shows a 2400 MHz CPU, while the PM shows (2) 3400 MHz CPU (due to HT). I checked all my other virtual machines, and they are all 'show' 2400 MHz, so this must be a virtual standard machine type? I think that the virtual computer guest has access to the CPU ramp according to the needs, but then I'm not clear why the task manager would show that he attached the entire lot? It is likely that task manager prompt indicates whether flatlined to 100% of a 2400 Mhz CPU, even if she isn't really the most? If this is really the most, our admin should not be able to increase the dedicated CPU (I looked at the console with him and did not see an obvious option for this)? Is it possible to enable hyperthreading on the * comments * OS to mimic what has had on the PM? We cannot add another CPU to the guest due to licensing issues. Oh yes, the guest operating system is windows server 2003 and VMware ESXI 4.1 server. Thank you very much!

  G

  The speed of the CPU that you see is the speed of the physical processor in ESXi hosts. You cannot increase this speed, however - licensing - usually, you can assign two vCPUs, virtual machine as a dual CPU core instead of 2 processors. This option has been added to ESXi 4.1. See http://kb.vmware.com/kb/1010184 for more details.

  What you need to do is to set the number of processors to 2 and add the advanced parameter cpuid.coresPerSocket = 2.

  André

• Customize the virtual machine guest operating system crashes

  I'll put a guest operating system XP very basic in a pool of utter connected auto. After a good market the checklist in the admin manual the pool begins to create guests. When he got to the customization step machine virtual guest operating system, it failed. The error was:

  A specified parameter was not correct.

  spec.identity.userData.computerName

  No idea what this means and how to fix it?

  Hi dTardis,

  Using special characters in the hostname?

  Good luck.

  Concerning

  Franck

• Avoid checking "the guest operating system has locked the door of CD-ROM. disconnect anyway and replace the lock?

  Using PowerCLI, I'm trying to create a script that logs off the CD player and affects the client machine and Passthrough IDE using the command:

  Get-cddrive - VM SRVVM616 - netscan02.kb.se | game-cddrive - nomedia - confirm: $false

  * (where SRVVM616 - netscan02.kb.se is the VM name in this case)

  But I can't get rid of an audit question that arises in vSphere Client:

  'The guest operating system has locked the door of CD-ROM...

  Unplug anyway and replace the lock? »

  The script hangs until I answered the question, and who does the idea of a useless script?

  How can I avoid this issue?

  Maybe the method I described in answer to the question! could help.

• How to install the guest operating system (winndows)

  Hello

  Please send me the start-up stage guest operating system (windows Server 2008) of SAN.

  Concerning

  Mathon.

  It will detect as raw disk and then you need create the partition on the raw disk.

• Cannot run the program in the guest operating system

  Hello

  I'm trying to run a program file (an .exe) in a virtual machine via vCO using executeCommandInGuest.

  The thing is that the .exe file starts a user interface to display the status (do not ask for entry) when it runs locally. When I call the script of vCO, I get the following error:

  Error while executing command (can not run the command: InternalError: a general error occurred: a program could not run on the guest operating system (name of the dynamic Script Module: executeCommandInGuest #40) (name of the dynamic Script Module: executeCommandInGuest #46))

  
  

  If I try to call a .bat file in the VM that starts the program of the WF works but the .exe file is never started in the virtual machine.

  If I specify to run another .exe for example ping.exe only complete control of WF and if I specify a .bat file that call ping.exe he also successfully complete.

  There is no silent mode for the .exe I need performed.
  

  Any help would be appreciated.
  

  Thank you

  Magnus

  The problem was caused by the user access control. Put forever does not resolve the problem, disable it through the user interface, restart the virtual machine, and then continue with my script.

• Surface Pro 3 - errors when you try to start a guest operating system 64-bit

  I get the following errors setting up an Ubuntu guest operating system.

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.

  This host supports Intel VT - x, but Intel VT - x is disabled.

  Intel VT - x can be disabled if it has been disabled in the BIOS/firmware settings or host was not powered by bicycle since changing this setting.

  (1) check that the settings BIOS/firmware activate Intel VT - x and disable "trust execution."

  2 turn on the host if either of these BIOS/firmware settings have been changed.

  (3) turn on the host if you have not done since the installation of VMware Workstation.

  (4) update of the BIOS/firmware from the host to the latest version.

  I've been Googling this problem since yesterday and so far, I have not come to any possible solution. Certainly, I can install the 32-bit linux flavor, but that doesn't help me when I run the installation to other 64-bit operating systems.

  I was able to resolve the issue, after most googleing. I'm always a little surprised that it works, but hey, Ubuntu is installing.

  I installed Microsoft Visual Studio, including phone windows SDK (must be included).  I disabled and then Hyper-V by issued this command in a shell of administrator command:

  bcdedit/set hypervisorlaunchtype

  If you want to reactivate it, you then type this command

  bcdedit/set auto hypervisorlaunchtype

  WinSupersite credit for the tip (link http://winsupersite.com/mobile-devices/surface-pro-3-tip-hyper-v-vs-connected-standby)

  Once I rebooted and restarted Vmware, I could start Ubuntu and start the installation process.

• Guest operating system installation

  I have Vmware workstation 7 and try to install the guest operating system, but it gives me the error message like, no operating system. Can someone help me please?

  In the .log files, I noticed that the name of the file you linked at the end of CD/DVD in the DAA and DAA (Direct Access Archive) files are not ISO Image files, and are not directly usable with VMware Workstation!  You must use a valid Image ISO Bootable file!

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• VM does not start after the crash of the guest operating system

  VM Workstation 10.03

  Host OS Ubuntu 12.04

  Guest OS Windows XP SP3

  VM normally works well under VM for over a year.

  While I was updating a mp3 Player XP is crushed, and even power off the virtual machine does not work.

  After a Resart of the host operating system, the guest could not start.

  I deleted the directory .lck file.

  When I start the VM OS prompt written

  Loading... - VMware Workstatiion

  and nothing else happens.

  Another guest operating system will work very well.

  How can I restart my XP?

  After a day down from the host (a very cold reboot) and deleting all .lck files.

  VM aloowed me to dispose of the session.

  After that cold booted XP as it was before.

  Thanks to a.p. to put me on the right forum.

• Guest operating system compatibility

  Dear team,

  We have mix U1 ESX5.1 and ESXi5.5U2 environment. We are palnning to deploy Windows 2012 R2 on U1 ESXi5.1 host, I want just to cofirm will, I was able to migrate 2012 SMV of ESXi5.1U1 to ESXi5.5U2 I found that there are a few incompatibity with mixed version as shown below KB. I would also like to confirm that they said that this applies to 5.0.x and 5.1.x.

  

  need your urgent help on the same.

  concerning

  Mr. VMwrae

  Ko 2033723, the affected guest operating system is Windows Server 2012 (not R2) and hosts ESXi 5.0 Update 1 or ESXi 5.0 P03... then I think you should just avoid using this version of the build host, given that the VMware compatibility shows that Windows Server R2 2012 is compatible only with ESXi 5.0 Update 2 and later versions.

  On the other KBs, make sure to read workaround, and everything will be OK.

• Most recent version of the guest operating system as the host of the basic version?

  H there, just a quick question.

  Would this work if guest operating system is 10.7 but host operating system is 10.6.8? I use 4 Fusion

  Very much appreciated.

  Technically by the OS X ALS detail you can only virtualize a legally virtalizable version of Mac OS X (Client) under him.  In other words under OS X 10.6 Client ALS detail allows to be virtualized so so technically the only legally virtalizable version of Mac OS X is Mac OS X Server 10.5.x/10.6.x that which is technically required by the SLA in detail and what is technically possible are two different things.  In other words we can virtualize OS X 10.7 (Client or server) but ALS retail for OS X 10.7 requires it be done on OS X 10.7.  Now VMware and VMware Fusion or not apply this requirement and it is up to the user to work in the product EULA and or SLA.

  BTW I don't remember if VMware Fusion 4 supported OS x 10.7, but if it's a selectable BONE in the wizard, then you can try though in violation of ALS retail for OS X 10.7 If you use a retail OS X 10.7.