Guest OS Windows cloned Blueprint agent installation program

Similar Questions

• Windows 2003 Remote Agent installation problem.

  Dear team,

  I am facing a problem in the installation of the agent RA in win2003.

  Details:-

  1 windows 2003 server r2 SP2

  2. agent remotely 4.1.4.13.16

  3 operating system 32 bit version

  Kindly advice

  Kind regards

  Subash.c

  Hi Philippe,.

  There is a patch for version 4.1.4. 4.1.4 ACS must be installed before you install this hotfix.

  Instructions on how to install the patch

  ========================================

  1. make sure that Cisco Secure ACS Agent 4.1.4.13 is installed.

  2. extract the files NTlib.dll, CSLogAgent.exe, CSAgent.exe, CSWinAgent.exe, NAS.dll, ConsoleDLL.dll, csvLog.dll, EndPoint.dll & odbcLogger.dll of Acs - 4.1.4.13.16 - RA.zip

  3. stop the Cisco Secure ACS Agent service.

  4 locate CiscoSecure ACS Agent\bin and save a copy of the course NTlib.dll, NAS.dll, CSAgent.exe, CSLogAgent.exe, CSWinAgent.exe & EndPoint.dll

  5 copy the files NTlib.dll, CSLogAgent.exe, CSWinAgent.exe & EndPoint.dll extracted zip CiscoSecure ACS Agent\bin, NAS.dll, CSAgent.exe

  6 locate CiscoSecure ACS Agent\Support and save a copy of the current ConsoleDLL.dll, csvLog.dll & odbcLogger.dll

  7. ConsoleDLL.dll, csvLog.dll & odbcLogger.dll copy extract the files from the zip to CiscoSecure ACS Agent\Support

  6. start the Service Agent secure Cisco.

  Kind regards

  ~ JG

  Note the useful messages

• installation problem: I have windows 7, but the installation program detects vista

  I bought lightroom 6. I have run the install, but when it comes to verification of my computer, it detects vista. I have windows 7. I can't go further and install my product.

  Can someone help me solve this problem?

  Hello

  a quick search brought up this thread with the same problem: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

  Best regards
  Maurice

• Reinstalling windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd.

  Setup cannot copy files?

  I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.

  migregdb.ex_
  icwconn1.ex_
  ICWCONN2.ex_
  INETWIZ.ex_
  icwhelp.dl_
  icwutil.dl_
  icwrmind.ex_
  ICWDL.dl_
  icwx25a. COURIER
  icwx25b. COURIER
  icwx25c. COURIER
  ICWIP. COURIER
  Phone.ic_
  Phone.ve_
  State.ic_
  MSICW.is_
  MSN.is_
  support.ic_
  Msobshel.ht_
  ISIGNUP.ex_
  icwtutor.ex_
  icwres.dl_
  trialoc.dl_
  Oobeinfo.in_
  Oemlogo.gi_
  Mouse.ht_
  ISP.ht_
  Oempriv.ht_

  I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?

  JOEY

  To the file copy stage of the registry would be game.  It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.

  John

• Windows XP, the installation program tells me that my product key is not valid.

  XP product key issue

  Hello, I wiped recently my HD - Ive saved the files I need and reformatted, however when I just reinstalled Windows XP, the installation program tells me my product key is not valid. I know it's the product key correctly that I recorded the original in the body of my PC - no clue please Clive * address email is removed from the privacy *

  Hello

  Follow the steps from the link and check if it helps: you receive an error message after you enter the product key when you try to install Windows XP: http://support.microsoft.com/kb/310637

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Failed to initialize the installation program. Error 110. On Windows XP.

  Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:

  Failed to initialize the installation program. Error 110.

  I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?

  Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:

  1. reboot Windows XP in Safe Mode
  2. double-click on the Setup program to start the installation process
  3 cancel the installation process after it starts
  4. restart windows in normal mode

  Now, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.

• reinstall iTunes error message "there is a problem with this windows package install." A program to complete this installation could not be run "."

  original title: problems with the installation!

  I'm trying to reinstall iTunes I have experienced problems with it. However, when I try to install an error pops up saying something along the lines of "there is a problem with this windows package install." A program to complete this installation could not be run "." I have no idea why this happens and no idea how to solve this problem.

  Any help would be great.

  Error 9010

  To disable the Desktop Window Manager by process - response: this is a normal message when a process requires exclusive access to the desktop (e.g. use DirectDraw /OpenGl in exclusive mode) or just likes to turn off the Messenger of the window of the Office for some reason any. It is not an error.

  Error 9013

  Press Windows Flag + R

  Type %windir%\system32\SystemPropertiesAdvanced.exe
  Press Ok

  Under performance, click the Settngs

  Check enable the Composition of the Bureau

  Click on apply, Ok

  Error 1002 - I need the specific message

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735604 (WS.10) .aspx

  Error 1001-

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735588 (WS.10) .aspx

  Reset the Web browser

  Tools > Internet Options > Advanced tab

  Click on the Reset button

  Check delete all personal settings

  Click on the Reset button

  Click Ok

  Close the window

  Restart the computer for the changes to take effect

  Retry Installation

  Error 100 - support contact Apple

  http://TechNet.Microsoft.com/en-us/library/cc774985 (WS.10) .aspx

• I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell

  I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance

  original title: where to find WIndows Poweershell?

  Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.

• I accidentally deleted the windows installation program and I am unable to install new programs

  Original title: windows setup

  I accidentally deleted the windows installation program and I am unable to install new programs. Is there one solution other than reinstalling windows?

  Please start the prompt with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  CFS was able to reinstall Microsoft Installer?

  Best regards
  Amdre

  [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  [2] http://support.microsoft.com/kb/929833 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• x 64 Windows Vista Update Agent is terminated abnormally with an error 80070424 and reset of the agent is not successful.

  I searched through of many post about problems with Windows Update Agent unusable for Vista 64 computer x which I maintain on a volunteer basis for a not-for-profit organization. I tried the following that I found in various articles in the knowledge base:

  1. Requests for assistance MS FixIt suggested performance. They have all failed when installing the PowerShell.

  2. replace officers update the page that provides the installation program. Installation always eventually fail.

  3. According to the remittance advice to Update Agent, found at https://support.microsoft.com/oas/default.aspx?gprid=6527&st=1&wfxredirect=1&sd=gn

  Advice, to #3 was informative since some commands manual regsvr32 *.dll reported errors where the dynamic link library wouldn't "load" or the administration server could not find a certain "entry point". Does that mean that these dll is corrupt and must be replaced. If so, how he does it. It doesn't seem practical in more aggressive steps suggested to reset the agent given that the errors occurred using the less aggressive path.

  The computer I'm servicing came with Vista delivered, and the original disks are not available. The Startup Repair utility reported no errors or corrections. In addition, sfc/scannow only reports an error indicating it cannot successfully completed his task. So, I don't know how I can successfully restore these dynamic link libraries.

  I thank you for any advice you can give and forgive me if I don't have enough to search the knowledge base for an answer that already exists. Have a great day.

  Once again thanks for your response. I spent more than 20 hours on this computer and I wonder if the upgrade with Win 7 (or 8 when available) will solve the problem.

  I am a volunteer system to this nonprofit administrator, and my suggestions to secure computers are not always accepted. Thus, they probably will not disconnect the computer from the network. I suggested that personnel limit only accounts and that we establish a security policy for computers and a "standard" image However, each clerk vetoed my suggestion. I note only about one-tenth of a vote on all business issues. I have little to say in what is done. I do mostly what I said and I work what they deem is a technical miracle occasionally.

  I will suggest they buy an upgrade if this should solve the problem, since I can't spend much more time on this issue. If this does not resolve the problem, they work with what they have, because they would not listen when I told them that they should not install all these products of third-party software "free." I told them that if it is not Oracle (formerly Sun), Microsoft or Adobe don't install it. Their products cover everything they need. We cross our fingers and hope that nobody issues a 'format c:' command remote computer impaired!

  Have a wonderful day.

• I can't install Windows XP and remove installs Windows 7

  I installed a Windows 7 upgrade version, but apparently I formatted the hd before installation. Now he says that my activation key is not valid. Tips from Microsoft to reinstall the previous version of Windows. But when I insert the CD of Win XP to start the configuration, the configuration of Windows XP option is red, so Windows 7 prevents somehow the XP installation program. There is no OS on the drive hard when I installed Win 7.

  Windows 7 system is 64-bit.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Problems with deployment of network shared on windows PC when installing INSTALLER variables

  Hello

  I'm using LabVIEW 2014 on Windows 7. I have a project that is developed to be a client GUI (192.168.1.208). The GUI communicates with an application of RT (192.168.1.206) running on LV RT OS and both are connected to a network. The NSV (shared network variables) are housed next to the RT (SVs is on RT/demand side project). This part (communication and everything) works very well.

  Now another part is recording data. Why NSV (hosted in the GUI project) are used for strings of communincate (events with the data) to a computer running the registration of data on this PC (192.168.1.208) server. Please note here, currently same PC (192.168.1.208) was used for recording the data server implementation, but later, there may be a new PC that's why NSV is used. I gave this information in case there may be no problem (chances are though).

  

  I created an application (*.exe) and the project GUI installation program. Saving data to the PC (192.168.1.208) if I use one of the options-project/*.exe/installer works supposed. but when I try to install this Setup program on another PC on the network which has no service OR installed gives following error during installation:

  Deployment deployment failed shared Variables.lvlib\\192.168.1.109\Shared Variables (error:-1967362042, operating system and Network Services: (Hex 0x8ABC7006) could not start service.).

  I have tried almost all the variations in the construction of Installer and .exe for it, but couldn't get rid of this error.

  I also want to know how would be a PC not having not OR services/programs installed would host OR shared Variable engine. Although application of the runtime in the application, we give option while building the .exe. But not for the EVS.

  I lost several weeks on this issue of emergency assistance would be much appreciated.

  Thank you.

  If you uncheck the option "selection auto installers" in installer build specification, it should give you the full list of installers, you can include. It's a little weird that it has not detected the requirement of NSV, however.

  I think you make you life difficult for yourself by trying to do a few odd handshakes with strings/NSV - NSV is 'tag' data - they are good for the reading of the last value of a variable/signal. If you want to send messages around - stream, network - there is even something like reference e-mail Simple (STM) library - http://www.ni.com/example/27739/en/