Fontstyle warning message dialog box problem

Similar Questions

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Dialog box: problem with an application mstoolbar wlextension.dll

  Original title: dialog box:

  I am told that there is a problem with an application mstoolbar wlextension.dll

  Hello

  ·          What exactly is the problem that you are facing?

  ·          When you get this dialog box?

  wlextension.dll is a MSNExtension.DLL belonging to Windows Live Toolbar.

  I suggest you to uninstall the toolbar and install it again.

  Refer to: http://help.live.com/help.aspx?project=toolbarv3&market=en-nz&querytype=topic&query=toolbarv3_proc_uninstalltoolbar.htm

  You can post your queries to the Windows Live Forums to learn more: http://windowslivehelp.com/

  Diana

  Microsoft Answers Support Engineer

• Lowered target Version 9.0 or later form and now the validation messages are appearing, even when the Show Messages dialog box is set to "do not display any message boxes at all."

  Hi all:

  I went a form target version of "10.0 and higher" to "9.0 or more ' and now I get messages from automatic validation of Adobe to appear, even when the Validation of the form of the document is set on"don't show all the message boxes at all."

  Any thoughts?  I have listed some other form to 9.0 and higher and the same setting form Validation works "do not want to display all message boxes".

  The only thing I can think is the decommissioning of 10.0 to 9.0 or more did something?

  Thanks in advance,

  Brian

  without knowing what the errors are, it is difficult to say what the problem is. Forms are usually not popups unless you use FormCalc. Then, the software is displayed a FormCalc error.

• The find-> find Messages dialog box has no place to enter search terms. How do I do that?

  OSX Yosemite / Tbird 38.3.0

  No amount of fiddling with the controls does make a difference. In previous versions, there was an empty query in the top pane, along with a button to add more.

  Thank you. useful comments. There seems to be some visual oddities like that, but only on Mac computers.

• In remote desktop, when I run Lotus Smartsuite, the dialog boxes are empty when there should be messages!

  My CRM is created through Lotus Smartsuite approach and it is sitting on a server. Access us this server via remote desktop.

  When you access via Windows XP and older, you can consider all messages dialog box. However, when you access it through Windows 7, all messages to the dialog box disappear.

  Can someone shed light on this and suggest the remedy?

  See: http://playbyear.com.my/docs/StatusBlank.PNG

  Thank you.

  Alex

  Hello

  The question you have posted is related to CRM and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en/CRM/threads

  I hope this helps.

• Close the Popup by clicking on the OK button on the dialog box information Message

  JDev ADF BC 11.1.1.5.0
  
  I have a popup and a dialog box on the inside where the user enters data and click Save.
  I show an Information message when the click on save on having managed the insertion of data in the database.
  What I want to achieve, it's that I want to close the popup window with the click on the OK button located in the information message dialog box which has proved on memorizing data.
  There is already a similar thread Close popup in adf , but that was not a correct answer.

  (1) linking the main popup to a bean variable:

  public class MyBean
  {
    private RichPopup myPopup;
    ...
  }
  

  (2) add a DialogListener to the of the informational message:

  
    
      ... Info message here ...
    
  
  

  (3) use this DialogListener to close the main popup programmatically:

    public void infoPopupDialogListener(DialogEvent dialogEvent) {
      myPopup.hide();
  }
  

  Dimitar

• I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on

  I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on out of the box with this message, I get a different dialog box including the message says "it has not chosen to print pages".  Any suggestion would be appreciated.

  The way I got it to print has been:

  Without opening the program, in the list of applications, move on to Adobe Reader and right click, select Properties.

  Go to the compatibility and click 'run as Admin '.  Reopen the application and all prints for me now.

  (This can only work with your personal computer if?)

• Message box in function that returns a list deletes the created list... (Dialog box)

  Hello

  I work with a complex dialogue, its purpose is to manage a section in the PDF file.

  I use a "mclv" object in the dialog box to represent data entries in the PDF file in order to manage the result in another section.

  I created a function that creates the list based on a previous section in the PDF object, the function works perfectly well.

  But I have a small question, the function used to create the list of the dialog box object performs a check with the former front list created, as appropriate,

  and if in any case it is different from the old list, I need to warn the user that the list has changed and if there were any changes applied to the result it will be returned to zero and must be recreated.

  But when the poping that message box, all lists are deleted and nothing is displayed in the objects 'mclv.

  If I remove the message box, the lists are all very well...

  Is there anyone who have come across something like this before? If so, any solution to this problem?

  I asked my question a bit too quickly, I already found a work around

  But I still don't understand why he behaves like that tho...

  I just thought how to work around this problem.

  If anyone has encountered this problem can use this solution:

  Instead of having the message inside the function to return box, I declared a global Boolean variable to the Script object

  If the message box must be displayed, the Boolean value is set to True

  Once in the initialize event of the dialog box, if the value Boolean true I call the message box and reset the value Boolean false

• Why did I receive a "authors you trust" warning (author not verified in the dialog box) so that he was trying to install add-on?

  by downloading the plugin add-on, firefox has generated a dialog box "install add-ons only from authors trust you". I guess there is a good reason, that the browser displays this warning, at the time of issue, and I am not inclined to ignore it. I have a screenshot if necessary.

  I would like to know: if I should ignore this warning?

  Thank you!!

  Hello mrclaude, this is the default dialog that will be displayed during each installation of any extension. of course, there is a good reason to display this message if addons can be very powerful and very convenient, they could also do much harm. However, please note that all extensions hosted on addons.mozilla.org to get reviewed and approved before they become available to the public, so they can be generally considered as safe, especially those developed by mozilla itself of course.

• Dialog box "Load WARNING summary": charge dependence of the new path

  Hi gurus of LabVIEW,.

  To explain the issue see the following behavior:

  My main Application is in

  01_Main.lvproj

  This project (01_Main) contain several baskets libraries built from another project file, let's say

  02_PPL.lvlibp

  03_PPL.lvlibp

  My problem comes when I opened the 01_Main.lvproj get the dialog box 'support WARNING summary": charge dependence of the new path.

  The gap between all the path's SVN folder that is duplicated;

  Track:

  SVN_Project/SVN_Project/02_PPL.lvlibp/Myinstr.VI

  NewPath: (which is the right of an ofc)

  SVN_Project/02_PPL.lvlibp/Myinstr.VI

  Opening Myinstr.vi in the containning the 02_PPL.lvlibp project does not appear of the warning... or the dependency problems.

  No idea how to solve those WARNING? Even if ignoring their job well... How to solve those for good?

  ARO

  Vincent

  
  

• Weird shared Variable dialog box message

  I came across a strange in the dialog box behavior, while I created a new shared variable.

  That I was typing in the name, I kept see a warning will appear in the dialog box.  It would come and go as typed.  I realized that whenever I typed a space, and it is thus temporarily the last letter in the name SV, the warning popped up.  Type the next letter, the warning would leave.  You can see the space ending the name right before the cursor in the top image and name that ends with a normal character in the background image.

  Now, it is logical to me that ends a name shared with a space variable would be a bad practice and should be warned against.  But the warning never actually says that you cannot end with a space.  To be more precise, it says that you can not the slash code \s in the name of the variable.  Now I'm not really in the slash codes, but I'm in the spaces.  And they seem to work in variable name, just not if it is the last character very well.

  It just seems to be a disconnect between what says the warning, and what you can and can't do.

  Can you have spaces in the name SV?  From my experience, you can.

  In addition, in its LV 8.6 on a machine XP SP3.

  

  Thank you.  Please post the CAR ID # to the thread once you have it, then I'll put a link on the bug thread.

  Just to clarify, I see basically three questions.

  1. the error message is incorrect because spaces are allowed in the shared name of the variable, but the unclearly error that says they aren't.

  2. the spaces at the beginning or at the end of the shared variable, in my view, should not be allowed, but Ben could have an instance where he "backdoored" one in there.

  3. nuisance of user interface.  If spaces are not allowed at the end of the OAS, there is no need of an error message flashing on the screen that appears whenever you finish a word followed by a space before the next word begins.  The error message should really popup only once you click OK to save the variable.

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.

• Problem with FAX Setup dialog box

  When I start, a box dialog indicates that WIndows is trying to install a fax MACHINE and I have to go to the Manager end tasks now.  I don't want that, I didn't ask for it, I don't have the disc for it.  How can I get rid of him.  Microsoft doesn't make it easy to communicate with them.

  Hi Babs336,

  1. Did you the latest changes on the computer?
  2. Have you recently tried to install the Fax on the computer?
  3. When was the last time it was working fine?

  Method 1

  If you want to remove the computer's fax services, then try the steps mentioned.

  (a) click Startand then click run.

  (b) copy and paste or type the following command in the Open box, and then click OK:

  appwiz.cpl

  (c) it may take several seconds for your computer to compile a list of programs. The dialog box Add / Remove Programs opens.

  (d) click on Add/Remove Windows components on the left of the list of programs to start the Windows Components Wizard. This only lasts several seconds.

  (e) in the components list, clear the Fax Services check box, and then click Next. The installation program uninstalls the computer's fax services.

  How to enable and configure the fax service in Windows XP

  http://support.Microsoft.com/kb/306550

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS.

  Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS. By selecting CANCEL or CONTINIUE four times to close the box, but in a short time box reappears.

  I refer you here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

  You can expect ad try some things.

  You can actually ask why forums MS Answers just can not help with XP problems?