GUI in advance
Hi again I I got a guy o what components can use to make an interface for example Pentecost this buttons, tables and menus? It is envoriement of java? Thank you
I would like to start here:
This article comes from the knowledge base - you can bookmark the KB while you're there.
Tags: BlackBerry Developers
Similar Questions
-
BlackBerry Smartphones recent contacts Sync problem
Hi all
I recently started having bad sync my contacts and calendar (Outlook and Windows Vista 32). The trouble began shortly after the synchronization attempt with an error message "Can't read application information." It happens exactly at the same place. He's going to 'read' 193 all my contacts but stops at "transformation" 187 of 193 of these contacts. Phone is a Curve 8320 with 4.5 recently upgraded to os level and DM v4.6, both downloaded from T-Mobile. Any suggestions will be greatly appreciated.
P. S. thank you all for the help in my operating system upgraded, even if you didn't know that you gave it me.
Hi and welcome to the forums...
You have all null values in your Outlook address book? Usually, you can find them by sorting by name and look for empty entries. Also, you have an images associated with any of your contacts? (link to KB) If so, try to delete the photo.
If your Outlook address book is the same as your phone, you can do this step.
First, backup of your phone. If your address book is the same device and Outlook, use the BACKUP / ADVANCED and disable your address book on your Blackberry Handheld and re-synchronization. He must fill everything from Outlook to your BB.
If this does not work or you have a difference on the number of addresses on the BB from Outlook, then you can delete (backup first) your address book using GUI BACKUP/ADVANCED and re - import your address book on your Blackberry Handheld, using the advanced graphical user interface. This backup - restore will be re - index address book DB and can correct the problems. Then try to re-sync.
Let us know how you are doing...
-
Presentation of the multiSite screen
Hi gentlemen,
My setup.
-1 x with active MultiSite C40.
-1 x C20
-1 x Movi
C40 launches a MultiSite opening C20 and Movi. In C40 I got several presentation of the screen but to the Movi and C20, I had available to active speakers (to not)
several layout of the screen). Is this normal or should I get several presentation screen in Movi and C20?
Depends on what "distance in family" has been defined, you can set this to anything you want or by
CLI:
xConfiguration RemoteLayoutFamily video presentation:
or through the web gui:
Advanced--> video--> Layout
/Jens
-
Disable the autoload software instrument GUI, when you select a track
OK, so maybe this is the most recent update or I can I have turned it on by pressing a wrong button. But, in the past, when a track was a software instrument are entrusted to him, to open the instrument interface, you would:
1 Select the track via the console mixer or main scenario
2. click on the small button that looks like horizontal sliders in the middle of the channel strip that would open the GUI
However, these last something has changed so do anything when I'm selecting a track via the mixing console or the main timeline, the GUI of instrument software automatically loads and opens. As you might think, it's incredibly frustrating and certainly not necessary. Especially when it's a heavier instrument like Komplete Kontrol and must Access files more major libraries. I want to just go back to the way it was, where I have to click on the button in the image above to launch the GUI.
Update on the OS and logic, the latest versions of both.
I'm hoping this is an easy (probably) in trouble, but I can't seem to find any info on what caused it to change to auto load.
Thanks in advance for the advice.
Never mind! I got a PreSonus Faderport plugged, and it was the origin of the problem. Logic has had another problem of GUI, and as soon as I unplugged the Faderport, things are back to normal. He followed the question all the time, and I never thought to unplug the unit.
-
GUI GUI of Netflix needs work!
I have a BDP-S570. I bought a LG blu - ray player the same day I bought this S570. I did a test on bench of head to head with the speed of loading of Netflix and comparison of GUI. Sony S570 was much faster on Netflix load time, blu - ray disc loading speed and the speed of navigation in the menus, but the Sony Netflix GUI on the S570 was basic with few features compared to the LG. I kept the S570 because overall, the Sony has exceeded and I'm a big fan of Sony but the blu - ray LG GUI players have an advanced feature like FF fast forward jump to the top of the images when the fast forward button is pushed similar if not exactly to the GUI of Wii. The LG Netflix GUI has also larger images of film and a search function to add at the moment (Que.) Sony Netflix MISTLETOE is a very basic GUI. I know, we will see an improvement to the Sony Netflix GUI in the near future of one of the best companies in the electronic world.
The BluRay player Sony has a fast forward and return quick functionality when streaming videos. The arrows left/right and buttons FF/RW drive BD remote control works. If you do not see this pop up feature, make sure that your device has the latest version of the firmware:
http://eSupport.Sony.com/us/Perl/SWU-Li... dl = BDPS570
Sony engineers are working on an update to improve the Netflix Application on all Sony products with Netflix streaming capability. No ETA at this time, please don't visit our eSupport last updated firmware.
-
LabWindows CVI GUI problems on XP Embedded
I developed a CVI 9.0 application that works fine on XP Pro. On an XP Embedded system, however, when the application is started the GUI came but it appeared that all the text labels are absent and some controls showed no right. I could click on the controls and the application does what it was designed to do. I thought that maybe some of the font files had disappeared so I copied all the files from XP Pro system fonts and installed on the XP Embedded system but it has not fixed the problem.
See the attached screenshots...
I developed an application with CVI 6.0 for a XP system eight years ago and it works fine on the XP Embedded System.
Has anyone seen this problem?
I solved the problem simply by going to regional & Language Options Advanced and set to English (United Kingdom), then back to English (United States) and that some how my problems solved.
-
GUI is unresponsive upon receipt of data
I am relatively new to Labview and still getting used to the model data flow programming. I'm using LV as a control panel for some software and hardware running on an FPGA for a prototype I've created. Communication with the FPGA is made using the UART and seems to work correctly. I have however the problem as my command buttons unresponsive in certain special occasions. I think that the best way to go here, it is that I explain what must do my program (and what I think he should do), post my VI, explain when it blocks and I hope someone can help me to identify the problem.
As I said LV is supposed to be the Control Panel, via this Panel the user can change some settings and start/stop the measurement. Orders should be sent to the FPGA (ZYBO Board for those interested) which applies the commands and sends return measures.
I founded my VI on the simple state machine model and build the rest from there. I tried not to use too variable, as I read that this breaks the flow of data model, but sometimes I could not find another way.
It is thus the VI should work: after initialization, it should be waiting for the event status, pending a change in the value of the start/stop button or the button exit. Every second, a timeout event occurs and LV checks with the FPGA (and sends the commands to the FPGA). If the Start button is pressed the FPGA starts to measure in each packet, it returns the FPGA will tell how tall are there are still and send the data 60bytes to LV most of the time the UART communication is the bottleneck and the number of measures will begin to grow. During this time, however, I am still able to change the values of the controls I have send to the FPGA (I like). If I press the start/stop button once again I send the command stop to the FPGA, which means that it will stop measuring, but always send data to LV I think VI makes a loop on the same States when it measures (communication-> button control-> manage data-> communication). Meanwhile however the GUI does not appear to meet my keys, it won't let me change the commands I send or even use the exit button. This lack of response remains while I get data. Once the number of remaining measures hits 0 (the variable 'name' in VI) goes back to the State "in anticipation of the event" and at that time there my previous keys are executed. (So let's say that I pressed the convenient stop button are still some measures should be sent, if only the moment where I press the exit button it will not respond but once the communication has been completed, it will record key press exit and exit the VI.)
I tried to avoid working with timers since communication is the bottleneck for the moment, this is the reason why I will not return to the State "wait event" once the measures began.
I hope my explanation is clear, that otherwise, I'm happy to clarify even more (or reword if necessary). A summary of my problem:
During the time that I am able, and receive data I have to loop through the same States that when I stopped position and am simply receive data ("communication-> button-> handle control') data-> communication. When I am able the GUI is always sensitive and when I stopped measuring it is not. I hope that someone can help me to find the problem and we hope to offer you a solution.
Thanks in advance!
PS as I said that I am relatively new to programming LV so if you see some other "nono" you can also tell me to improve myself.
It is the nature of the beast when it comes to State Machines. This is why if you perform operations of a lot of time, you will need a parallel loop in order to accept user input. Look in the architecture of messages in queue manager that comes with LabVIEW. It is essentially a structure of the event in a loop that sends messages to another loop through a queue. The loop (slave) receiver is on these messages and takes as long as he wants without interrupting the user input.
In other news, it seems that you used the simple state machine good enough popularize and how to configure reports and other things. Here are a few tips none-the-less:
- You don't need the structure of the sequence. Your code already follows the stream, so you don't need to create separate data sections. It compartmentalizes the code and ultimately get rid of the ability of LabVIEW to perform some of these operations in parallel to increase the speed of execution. Structured sequence should be used when you do not have a way to control the operation order (by adding a wait between two operations, etc.).
- You can move the control command structure of the event and manage changes in value through a shift register. There is overhead associated with reading the control every single loop.
- Once you look into the QMH architecture, you will be able to get rid of all the Boolean reading of output you have in each case. The structure of the event should contain all your controls to optimize the functionality of input from the user.
- You have the cluster of error through each case because the model put there for you, but you do not use. You should the dishes your clusters of error through so that you know if you made a mistake somewhere. Your initialization and Comm States should have it wired for sure to see if you have a series being undermined.
-
Why can't I convert my Windows Server 2012 R2 Core GUI
Dear friend,
I installed windows 2012 base r2 and later I wanted to convert the heart to GUI. For this I executed as a result of processes.
# run cmd as administrator
# powershell
# Import - Module ServerManager
# Installation - WindowsFeature Server-Gui-Mgmt-Infra, server-Gui-Shell - restart
After completing 68%, I am getting above error (Please check the screenshot).
Someone please let me know how I can fix this problem?
Thank you very much in advance!
Best regards
Abhimanyu
Hello
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Running a Seq file when running the GUI (command line option) return an error
Hello
I use a LabVIEW based UI to run/execute a file in sequence by using the command line option. My command line is "Test DUT' D:\QF\GUI-test-Sequential.seq D:\QF\GUI-Test.exe - runEntryPoint
When I ran the get 3 popup saying that some of the perameters 'is not a valid file of LabVIEW"(see attachments). No idea how to avoid these messages? (The user interface works very well and runs the entrypoint of the USE Test)
LabVIEW 8.5
TestStand 4.1
Thank you.
Hi Tom,
When you create a new application to your specification to Build, you must set the 'Pass all arguments for application command line' in the Advanced tab.
Once you do that it should all work.
Concerning
Ray Farmer
-
Reset the Web GUI on the M600 iDRAC
Hello
I have problems of access to the iDRAC web gui on a couple of blades M600 (needed to get the console and re - install the operating system).
I read on Google that racadm racreset running can solve the problem, but this seems to be only available on of m610?
When I ssh into the M600 blade I gives me a prompt SMASH CLP Console (v1.08) and can not find everything related to actually reset the interface itself idrac.
Is it still possible on a M600? Otherwise, how can we reset the iDRAC interface? It does not fundamentally on port 80 - unlike our other blades, also M600s.
Thank you very much in advance for any pointers or direction.
Thank you
SoC
Rob,
An option to rest iDRAC on M600 is with the CMC. You can connect to the CMC and perform iDRAC reset page "Overview-> troubleshooting-> Reset chassis components. Select iDRAC reset for the corresponding housing option. You can also do CMC Racadm. Run "racadm racreset m - Server -
" of SSH or using remote racadm and CMC IP. What iDRAC firmware you have on M600? 1.65 is the last FW for iDRAC M600. If you do not have this FW on iDRAC can you update and check the same. You can download the same from
-
Force10 S60 - activation Web GUI
Does anyone know how to activate/access web GUI on a Force10 S60? I have the switch set to the point that I can ping from a client, but I can't seem to get access from a web browser. The help files have not gave me so much about the issue, so I hope someone here can point me in the right direction.
Thanks in advance,
-Michael
Hi Michael,
There is not an on the S60 web management interface, it's only of CLI. The commands that worked for the S50 aren't in the configuration for the S60 guide. http://downloads.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/Force10-s60_Reference%20Guide5_en-us.PDF
-
How to develop the GUI of Blackberry in Netbeans (RAD).
Hello
I want to develop Blackberry GUI quickly. so I prefer Netbeans IDE 6.5 but I'm unable to find drag and drop features of rapid development of applications such as JME. So please help if you know how RAD blackberry 4.7 on netbeans 6.5
Thanks in advance.
-Jitu.
If you want to do a moped for Blackberry then use Netbeans with the Visual Designer.
But after all, do not forget to use the preverify.exe utility (located in the JDE/bin folder of the Java development environment).
It is necessary to check the MIDlet jar bytecode to meet the requirements of the API of the RIM.
In case you want to create the GUI with net.rim classes in Netbeans there is no way, using MDS Studio.
-
Recommend a book for GUI concepts.
Hi gurus,
The subject says it all. I was never a fan of GUI programming. Always avoided. But now the BB I guess I have no choice but to dive head first into the GUI. In looking KB articles I realize I have very weak concepts of the fact that the graphical object or the Paint method and the method of layout and all that of other GUI things. Can someone recommend a good java GUI book that could help out me in the programming of BB. Something more than a book of beginner level.
Much obliged.
PS. I already beginning BlackBerry development by Anthony Rizk. Great book, but it touches just briefly on the GUI.
Agree with the last two posts.
More GUI controls keep getting included in the BONES, which can help, but only if you are targeting the current operating systems.
In my opinion, the two most useful GUI related KB articles are:
How - to implement advanced buttons, fields and managers
Article number: DB-00796
http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...How - to create a presentation of the rich UI at TableLayoutManager
Article number: DB-00783
http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/... -
2911 ISM and CUE: need to (re) install CUE to access GUI?
All the experts out there, I am a volunteer for installation of the IPT (voice) for my church. They have a 2911ISR router that I'm trying to install / set up for a small Office Setup.
The question is stated: need to (re) install CUE to get the GUI (web Interface) to work? It comes with CUE 8.6.6 on module ISM-SRE-300-K9. But I don't know if it's because the GUI isn't here or if I have configured the interfaces and route incorrectly.
Here is the list of software on the ISM:
MACC-2911-CUE # sh inst soft its
History of Software Installation:
See install.log for more details2014-03-19 12:48:39 * Install Publ. command * cmd: Opt 1: 0, Pkg:cue - allapps.sme.8.6.6.pkg Url:ftp://10.1.1.1// Mode: 1 Proto:1 host: 10.1.1.1
2014-03-19 12:56:41 * CLEANED SOFTWARE *.
Timestamp subsystem Version Description UID
2014-03-19 12:56:42 Thirdparty 8.6.6 Service motor Thirdparty Code a3442277-7890-4782-9e6b-9d19efc1e0d8
2014-03-19 12:56:42 plugin Enablement 8.6.6 enablement Plugin pack 26bd663c-3e5a-43d9-a6c3-5441ce44941b
2014-03-19 12:56:42 languages of linguistic support for voicemail 8.6.6 IDENTIFIES global pack e2e81cc6-39b5-47e1-9f83-b83c897fc50c
2014-03-19 12:56:42 overall 8.6.6 Global manifest edceaf0b-a890-4045-9086-5452fac85eba
2014-03-19 12:56:42 infrastructure 8.6.6 Service engine Infrastructure a36e1be1-ce8a-4f53-ace7-1844262aa0b9
2014-03-19 12:56:42 LPG Infrastructure 8.6.6 Service engine LPG Infrastructure 9f112eb1-6f58-4dd4-8faa-8530467af3b9
2014-03-19 12:56:42 Voice Mail 8.6.6 Voicemail application 8e7823e2-0e92-4470-8860-653246345f9d
2014-03-19 12:56:42 CUE Voicemail UK English 8.6.6 British English language pack fa803d25-9c89-4171-a14c-ec12d6ed6b8c
2014-03-19 12:56:42 Bootloader 2.1.36 (secondary) Service Engine Bootloader 9d7b26fb-21b2-416e-8b65-425c2f8da5d8
2014-03-19 12:56:42 8.6.6 installer Installer a0fb9f0a-fa5c-4b21-a64c-0cb9d6379573
2014-03-19 12:56:42 core 8.6.6 engine OS Core Service 430f25f9-0fed-48a4-b362-823937138501
2014-03-19 12:56:42 standard automatic Telephony Service Infrastructure 8.6.6 engine e3db91b0-f47d-460c-ad22-65001a5d45a9
2014-03-19 13:01:48 * CLEANED SOFTWARE *.
Timestamp subsystem Version Description UID
2014-03-19 13:06:40 * CLEANED SOFTWARE *.
Timestamp subsystem Version Description UID
2014-03-19 23:17:44 * CLEANED SOFTWARE *.
Timestamp subsystem Version Description UID
2014-03-19 23:41:53 * CLEANED SOFTWARE *.
Timestamp subsystem Version Description UID
2014-04-20 17:47:59 * CLEANED SOFTWARE *.
Timestamp subsystem Version Description UID
See install.log for more detailsCan you confirm the GUI files are there or they lack; in which case I need to (re) install CUE?
Thanks in advance for any help you can provide. It is greatly appreciated.
Shutdown?
-
Access gui Cisco 2811 v7.0.4 w/AIM-CUE
Hello
We are running an older router which works fine for our needs, as indicated in the subject. I am trying to access the graphical interface for the AIM - CUE and am unable to. I can access the ccme.html to the router, but that is not integrated with the function of automatic monitoring, nor there of our current configuration info. I added a route to the QUEUE of the command prompt and I am able to ping and the ip address of the QUEUE to access from a browser, but it points to builtin of the 2811 CCME or CCP. Any help anyone could offer would be greatly appreciated. Thanks in advance for your help. Please find the config for the router and the GUIDE below.
Router:
Router#sh running-config
Building configuration...
Current configuration : 12555 bytes
!
! Last configuration change at 20:19:49 CDT Sat Oct 26 2013 by GlennP
! NVRAM config last updated at 20:06:24 CDT Sat Oct 26 2013 by cmeadmin
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging discriminator ENV severity drops 4 facility drops ENVMON mnemonics drops
FAN_LOW_RPM
logging buffered discriminator ENV 4096
logging console discriminator ENV
logging monitor discriminator ENV
enable secret 5 $1$nCKH$KBDP9dCX10xvqP98Ucm5u/
!
no aaa new-model
clock timezone CST -6
clock summer-time CDT recurring
!
dot11 syslog
ip source-route
!
!
ip cef
ip dhcp excluded-address 172.22.1.154
ip dhcp excluded-address 172.22.1.200
!
ip dhcp pool Voice
network 172.22.1.0 255.255.255.0
default-router 172.22.1.154
option 150 ip 172.22.1.154
!
!
ip name-server 4.2.2.2
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
trunk group FXO
!
!
!
!
voice hunt-group 1 parallel
list 101,102,103,104,105,106,107
timeout 60
pilot 200
!
!
!
!
!
voice-card 0
!
!
crypto pki trustpoint TP-self-signed-4121280238
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4121280238
revocation-check none
rsakeypair TP-self-signed-4121280238
!
!
crypto pki certificate chain TP-self-signed-4121280238
certificate self-signed 02
3082023E 308201A7 A0030201 02020102 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 34313231 32383032 3338301E 170D3133 31303237 30313035
34375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D34 31323132
38303233 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C0A7 8EB7F49F C57776E1 9CD28DF9 F3EDF876 BB02405F 1DF7B345 319C419A
23C7D891 28F496B4 675D290C 60FAE2F4 6730D680 655DD0B5 61E64C72 2B73599A
A5567091 499FD933 646168FD 4E730B8C C1079AC5 7327B695 10ED4D76 2D931584
DDA2B93B 6681E10D C82F2ABB 9DB055C8 D157EACE AB19335C B172C3E3 D8EF8452
34E90203 010001A3 66306430 0F060355 1D130101 FF040530 030101FF 30110603
551D1104 0A300882 06526F75 74657230 1F060355 1D230418 30168014 ADD5749E
6A87B4CF 22F924BE 400851F6 B9F8412A 301D0603 551D0E04 160414AD D5749E6A
87B4CF22 F924BE40 0851F6B9 F8412A30 0D06092A 864886F7 0D010104 05000381
81004F81 D08AC0B6 41AAEA8B 35CAC6AF BC07DBF9 9CA42AF1 782BBCE9 1CBB68B6
0AD5A177 664FDFA0 079A5C76 29FB06B2 5760445F 8468F04B B6A37A39 32F8F079
DB6302FE 1792547D 199922B0 907C0CCA 1FD3C322 F7B70E7C 594E96F1 DE283C2A
B7313614 A028D7FF 96E9F047 79162805 4C1CA86F 0232BF0E 0A0659F5 24B7EEDA D5AE
quit
!
!
license udi pid CISCO2811 sn FTX1030A49Q
username cmeadmin privilege 15 password 7 08721D1D5C4854424A
username GlennP privilege 15 password 7 115A485642435A595C
!
!
no ip ftp passive
ip ftp source-interface FastEthernet0/0
ip ftp username cmeadmin
ip ftp password 7 091F1F5A4C54464753
!
!
!
!
!
interface FastEthernet0/0
ip address 10.1.1.146 255.255.255.0
duplex auto
speed auto
!
interface Service-Engine0/0
ip unnumbered FastEthernet0/1.1
service-module ip address 172.22.1.155 255.255.255.0
service-module ip default-gateway 172.22.1.154
!
interface FastEthernet0/1
ip address dhcp
duplex auto
speed auto
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 172.22.1.154 255.255.255.0
!
ip forward-protocol nd
!
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
!
ip route 0.0.0.0 0.0.0.0 10.1.1.30
ip route 172.22.1.155 255.255.255.255 Service-Engine0/0
!
!
!
tftp-server flash:phone/7940-7960/P00308000500.bin alias P00308000500.bin
tftp-server flash:Desktops/320x212x12/CampusNight.png
tftp-server flash:Desktops/320x212x12/CiscoFountain.png
tftp-server flash:Desktops/320x212x12/MorroRock.png
tftp-server flash:Desktops/320x212x12/NantucketFlowers.png
tftp-server flash:Desktops/320x212x12/TN-CampusNight.png
tftp-server flash:Desktops/320x212x12/TN-CiscoFountain.png
tftp-server flash:Desktops/320x212x12/TN-Fountain.png
tftp-server flash:Desktops/320x212x12/TN-MorroRock.png
tftp-server flash:Desktops/320x212x12/TN-NantucketFlowers.png
tftp-server flash:Desktops/320x212x12/Fountain.png
tftp-server flash:Desktops/320x212x12/CiscoLogo.png
tftp-server flash:Desktops/320x212x12/TN-CiscoLogo.png
tftp-server flash:Desktops/320x212x12/List.xml
tftp-server flash:gui/admin_user.html alias admin_user.html
tftp-server flash:gui/admin_user.js alias admin_user.js
tftp-server flash:gui/CiscoLogo.gif alias CiscoLogo.gif
tftp-server flash:gui/Delete.gif alias Delete.gif
tftp-server flash:gui/dom.js alias dom.js
tftp-server flash:gui/downarrow.gif alias downarrow.gif
tftp-server flash:gui/ephone_admin.html alias ephone_admin.html
tftp-server flash:gui/logohome.gif alias logohome.gif
tftp-server flash:gui/normal_user.html alias normal_user.html
tftp-server flash:gui/normal_user.js alias normal_user.js
tftp-server flash:gui/Plus.gif alias Plus.gif
tftp-server flash:gui/sxiconad.gif alias sxiconad.gif
tftp-server flash:gui/Tab.gif alias Tab.gif
tftp-server flash:gui/telephony_service.html alias telephony_service.html
tftp-server flash:gui/uparrow.gif alias uparrow.gif
tftp-server flash:gui/xml-test.html alias xml-test.html
tftp-server flash:gui/xml.template alias xml.template
tftp-server flash:ringtones/Analog1.raw alias Analog1.raw
tftp-server flash:ringtones/Analog2.raw alias Analog2.raw
tftp-server flash:ringtones/AreYouThere.raw alias AreYouThere.raw
tftp-server flash:ringtones/AreYouThereF.raw alias AreYouThereF.raw
tftp-server flash:ringtones/Bass.raw alias Bass.raw
tftp-server flash:ringtones/CallBack.raw alias CallBack.raw
tftp-server flash:ringtones/Chime.raw alias Chime.raw
tftp-server flash:ringtones/Classic1.raw alias Classic1.raw
tftp-server flash:ringtones/Classic2.raw alias Classic2.raw
tftp-server flash:ringtones/ClockShop.raw alias ClockShop.raw
tftp-server flash:ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xm
l
tftp-server flash:ringtones/Drums1.raw alias Drums1.raw
tftp-server flash:ringtones/Drums2.raw alias Drums2.raw
tftp-server flash:ringtones/FilmScore.raw alias FilmScore.raw
tftp-server flash:ringtones/HarpSynth.raw alias HarpSynth.raw
tftp-server flash:ringtones/Jamaica.raw alias Jamaica.raw
tftp-server flash:ringtones/KotoEffect.raw alias KotoEffect.raw
tftp-server flash:ringtones/MusicBox.raw alias MusicBox.raw
tftp-server flash:ringtones/Piano1.raw alias Piano1.raw
tftp-server flash:ringtones/Piano2.raw alias Piano2.raw
tftp-server flash:ringtones/Pop.raw alias Pop.raw
tftp-server flash:ringtones/Pulse1.raw alias Pulse1.raw
tftp-server flash:ringtones/Ring1.raw alias Ring1.raw
tftp-server flash:ringtones/Ring2.raw alias Ring2.raw
tftp-server flash:ringtones/Ring3.raw alias Ring3.raw
tftp-server flash:ringtones/Ring4.raw alias Ring4.raw
tftp-server flash:ringtones/Ring5.raw alias Ring5.raw
tftp-server flash:ringtones/Ring6.raw alias Ring6.raw
tftp-server flash:ringtones/Ring7.raw alias Ring7.raw
tftp-server flash:ringtones/RingList.xml alias RingList.xml
tftp-server flash:ringtones/Sax1.raw alias Sax1.raw
tftp-server flash:ringtones/Sax2.raw alias Sax2.raw
tftp-server flash:ringtones/Vibe.raw alias Vibe.raw
tftp-server flash:phone/7940-7960/P00308000500.loads alias P00308000500.loads
tftp-server flash:phone/7940-7960/P00308000500.sb2 alias P00308000500.sb2
tftp-server flash:phone/7940-7960/P00308000500.sbn alias P00308000500.sbn
tftp-server flash:phone/7941-7961/apps41.8-4-1-23.sbn alias apps41.8-4-1-23.sbn
tftp-server flash:phone/7941-7961/cnu41.8-4-1-23.sbn alias cnu41.8-4-1-23.sbn
tftp-server flash:phone/7941-7961/cvm41sccp.8-4-1-23.sbn alias cvm41sccp.8-4-1-2
3.sbn
tftp-server flash:phone/7941-7961/dsp41.8-4-1-23.sbn alias dsp41.8-4-1-23.sbn
tftp-server flash:phone/7941-7961/jar41sccp.8-4-1-23.sbn alias jar41sccp.8-4-1-2
3.sbn
tftp-server flash:phone/7941-7961/SCCP41.8-4-2S.loads alias SCCP41.8-4-2S.loads
tftp-server flash:phone/7941-7961/term41.default.loads alias term41.default.load
s
tftp-server flash:phone/7941-7961/term61.default.loads alias term61.default.load
s
tftp-server flash:CP7905080002SCCP060817A.zup
tftp-server flash:CP7912080003SCCP070409A.sbin
tftp-server flash:ATA030204SCCP090202A.zup
tftp-server exit
tftp-server music-on-hold.au
tftp-server enable
!
control-plane
!
!
voice-port 0/3/0
trunk-group FXO
no battery-reversal
no comfort-noise
connection plar 300
description 715833XXXX
caller-id enable
!
voice-port 0/3/1
trunk-group FXO
no battery-reversal
no comfort-noise
connection plar 300
description 715833YYYY
caller-id enable
!
voice-port 0/3/2
trunk-group FXO
no battery-reversal
no comfort-noise
connection plar 300
description 715833AAAA
caller-id enable
!
voice-port 0/3/3
!
!
!
!
dial-peer voice 100 pots
trunkgroup FXO
destination-pattern 9.T
!
dial-peer voice 800 voip
description VM
destination-pattern 800
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 300 voip
description Sterling AA
destination-pattern 300
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
!
sip-ua
mwi-server ipv4:172.22.1.155 expires 86400 port 5060 transport u
!
!
telephony-service
no auto-reg-ephone
max-ephones 40
max-dn 100
ip source-address 172.22.1.154 port 2000
timeouts interdigit 3
system message Sterling Optical #258
load 7960-7940 P00308000500
dialplan-pattern 1 . extension-length 3
voicemail 800
max-conferences 8 gain -6
call-park system application
moh flash:/music-on-hold.au
multicast moh 239.10.16.1 port 2000
web admin system name admin password cisco
dn-webedit
time-webedit
transfer-system full-consult
secondary-dialtone 9
fac custom dpark-retrieval *00
create cnf-files version-stamp 7960 Apr 15 2013 22:15:20
!
!
ephone-dn 1
!
!
ephone-dn 11 dual-line
number 101
name Front 1
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 12 dual-line
number 102
name Front 2
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 13
number 103
name Front 3
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 14
number 104
name Exam Room
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 15
number 105
name Screening Area
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 16
number 106
name Lab
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 17
number 107
name Insurance Office
call-forward busy 800
call-forward noan 800 timeout 10
mwi sip
!
!
ephone-dn 18
number 108
name 7940
!
!
ephone-dn 19
number 109
name Spare1
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 20
number 110
name spare2
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 21
number 111
name Spare1
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 30
number 201
label General VM
description General VM
call-forward all 800
hold-alert 30 originator
!
!
ephone-dn 77
number 777
park-slot timeout 300 limit 2 recall
description Call Park Slot
!
!
ephone-dn 88
number 888
park-slot timeout 300 limit 2 recall
description Call Park Slot
!
!
ephone-dn 99
number 000
mwi off
!
!
ephone-dn 100
number 001
mwi on
!
!
ephone 1
mac-address 0015.62EA.5C58
username "frontdesk1" password cisco
type 7960
button 1:11
!
!
!
ephone 2
mac-address 0015.62B5.DBF6
username "frontdesk2" password cjp44206
type 7960
button 1:12
!
!
!
ephone 3
mac-address 0007.855C.853F
type 7940
button 1:13
!
!
!
ephone 4
mac-address 0017.E001.0940
type 7940
button 1:14
!
!
!
ephone 5
mac-address 0007.8553.2B3C
type 7940
button 1:15
!
!
!
ephone 6
mac-address 0015.C614.A1D1
type 7940
button 1:16
!
!
!
ephone 7
mac-address 0015.F9EC.1EED
username "insurance" password 1234
type 7940
button 1:17
!
!
!
ephone 9
!
!
!
ephone 10
mac-address 0007.8553.2E74
type 7940
button 1:20
!
!
!
ephone 11
mac-address 0019.E855.7616
type 7940
button 1:21
!
!
!
line con 0
line aux 0
line 194
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
login local
transport input telnet ssh
transport output telnet ssh
!
scheduler allocate 20000 1000
ntp master 6
ntp peer 69.164.217.193
ntp peer 204.9.136.253
end
CUE:
Router#service-module service-Engine 0/0 sess
Trying 172.22.1.154, 2194 ... Open
AIM-CUE#
AIM-CUE# sh running-config
Generating configuration:
clock timezone America/Chicago
hostname AIM-CUE
line console
exit
system language preferred "en_US"
ip name-server 4.2.2.2 4.2.2.3
ntp server 172.22.1.154 prefer
software download server url "ftp://127.0.0.1/ftp" credentials hidden "6u/dKTN/h
sEuSAEfw40XlF2eFHnZfyUTSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfG
WTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
site name local
site-hostname 172.22.1.154
web credentials hidden "c9yem6kD1vJqrOHVxftjAknfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0n
fGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
end site
privilege ViewHistoricalReports create
privilege manage-users create
privilege manage-passwords create
privilege ViewRealTimeReports create
privilege local-broadcast create
privilege broadcast create
privilege vm-imap create
privilege ManagePublicList create
privilege ViewPrivateList create
privilege ManagePrompts create
groupname staff create
groupname Broadcasters create
username GlennP create
username insurance create
username admin create
username cisco create
privilege ViewHistoricalReports description "Privilege to view historical report
s"
privilege manage-users description "Privilege to create, modify, and delete user
s and groups"
privilege manage-passwords description "Privilege to reset user passwords"
privilege ViewRealTimeReports description "Privilege to view realtime reports"
privilege local-broadcast description "Privilege to send local broadcast message
s"
privilege broadcast description "Privilege to send local or remote broadcast mes
sages"
privilege vm-imap description "Privilege to manage personal voicemail via IMAP c
lient"
privilege ManagePublicList description "Privilege to manage public lists"
privilege ViewPrivateList description "Privilege to view private list"
privilege ManagePrompts description "Privilege to create, modify, or delete syst
em prompts"
privilege ViewHistoricalReports operation report.historical.view
privilege manage-users operation user.configuration
privilege manage-users operation user.mailbox
privilege manage-users operation user.password
privilege manage-users operation user.remote
privilege manage-users operation user.pin
privilege manage-users operation system.debug
privilege manage-users operation user.notification
privilege manage-users operation group.configuration
privilege manage-passwords operation user.password
privilege manage-passwords operation user.pin
privilege manage-passwords operation system.debug
privilege ViewRealTimeReports operation report.realtime
privilege local-broadcast operation broadcast.local
privilege local-broadcast operation system.debug
privilege broadcast operation broadcast.local
privilege broadcast operation system.debug
privilege broadcast operation broadcast.remote
privilege vm-imap operation voicemail.imap.user
privilege ManagePublicList operation voicemail.lists.public
privilege ManagePublicList operation system.debug
privilege ViewPrivateList operation voicemail.lists.private.view
privilege ManagePrompts operation prompt.modify
privilege ManagePrompts operation system.debug
groupname Administrators member admin
groupname Administrators member cisco
groupname Broadcasters member admin
groupname staff privilege broadcast
groupname staff privilege local-broadcast
groupname Broadcasters privilege broadcast
groupname staff phonenumber "201"
username insurance phonenumber "107"
username GlennP supervisor designate
restriction msg-notification create
restriction msg-notification min-digits 1
restriction msg-notification max-digits 30
restriction msg-notification dial-string preference 1 pattern * allowed
backup server url "ftp://127.0.0.1/ftp" credentials hidden "EWlTygcMhYmjazXhE/VN
XHCkplVV4KjescbDaLa4fl4WLSPFvv1rWUnfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8Z
ZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
calendar biz-schedule sterling_open
closed day 1 from 00:00 to 24:00
open day 2 from 10:00 to 18:00
open day 3 from 10:00 to 20:00
open day 4 from 10:00 to 18:00
open day 5 from 10:00 to 20:00
open day 6 from 10:00 to 18:00
open day 7 from 09:00 to 17:00
end schedule
calendar biz-schedule systemschedule
open day 1 from 00:00 to 24:00
open day 2 from 00:00 to 24:00
open day 3 from 00:00 to 24:00
open day 4 from 00:00 to 21:00
open day 4 from 22:00 to 24:00
open day 5 from 00:00 to 24:00
open day 6 from 00:00 to 24:00
open day 7 from 00:00 to 24:00
end schedule
ccn application autoattendant aa
description "Sterling Auto-Attendant"
enabled
maxsessions 4
script "aa.aef"
parameter "busClosedPrompt" "AABusinessClosed.wav"
parameter "holidayPrompt" "AAHolidayPrompt.wav"
parameter "welcomePrompt" "AAWelcome.wav"
parameter "disconnectAfterMenu" "false"
parameter "dialByFirstName" "false"
parameter "allowExternalTransfers" "false"
parameter "MaxRetry" "3"
parameter "dialByExtnAnytime" "false"
parameter "busOpenPrompt" "AABusinessOpen.wav"
parameter "businessSchedule" "systemschedule"
parameter "dialByExtnAnytimeInputLength" "4"
parameter "operExtn" "1001"
end application
ccn application ciscomwiapplication aa
description "ciscomwiapplication"
enabled
maxsessions 6
script "setmwi.aef"
parameter "CallControlGroupID" "0"
parameter "strMWI_OFF_DN" "8001"
parameter "strMWI_ON_DN" "8000"
end application
ccn application msgnotification aa
description "msgnotification"
enabled
maxsessions 6
script "msgnotify.aef"
parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"
parameter "DelayBeforeSendDTMF" "1"
end application
ccn application promptmgmt aa
description "promptmgmt"
enabled
maxsessions 1
script "promptmgmt.aef"
end application
ccn application sterlingaa aa
description "sterlingaa"
enabled
maxsessions 6
script "sterlingaa.aef"
parameter "Sterling_Sched" "sterling_open"
parameter "Sterling_Hunt" "200"
end application
ccn application voicemail aa
description "Sterling Voicemail by RhinoIT"
enabled
maxsessions 4
script "voicebrowser.aef"
parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"
parameter "uri" "http://localhost/voicemail/vxmlscripts/login.vxml"
end application
ccn engine
end engine
ccn reporting historical
database local
description "se-10-1-1-6"
end reporting
ccn subsystem sip
gateway address "172.22.1.154"
mwi envelope-info
mwi sip sub-notify
end subsystem
ccn trigger http urlname msgnotifytrg
application "msgnotification"
enabled
maxsessions 2
end trigger
ccn trigger http urlname mwiapp
application "ciscomwiapplication"
enabled
maxsessions 1
end trigger
ccn trigger sip phonenumber 2000
application "voicemail"
enabled
maxsessions 4
end trigger
ccn trigger sip phonenumber 300
application "sterlingaa"
enabled
maxsessions 6
end trigger
ccn trigger sip phonenumber 800
application "voicemail"
enabled
maxsessions 6
end trigger
service phone-authentication
end phone-authentication
service voiceview
enable
end voiceview
voicemail callerid
voicemail broadcast recording time 300
voicemail default messagesize 240
voicemail notification restriction msg-notification
voicemail mailbox owner "admin" size 775
description "admin mailbox"
end mailbox
voicemail mailbox owner "insurance" size 775
description "insurance mailbox"
end mailbox
end
-Pat
Is not clear what you mean. IP of CUe should put CUE GUI.
Maybe you are looking for
-
Exclamation point on generic Bluetooth adapter
Hello There are exclamation on generic bluetooth adapter in the list of driversAfter you have installed bluetooth monitor.Please help me solve the problem. Thanks in advance.
-
I'm an awkward soun effect when I go to ANY website with Firefox. The sound does not stop. I use a close new Mac Book Pro with the latest version of OSX and Firefox This has happened Each time Firefox opened == I left the Air Warriors site, which I v
-
MyFileName.mdf is not a primary database file.
When accessing an .mdf file, I get this: MyFileName.mdf is not a primary database file. This means that the file is corrupted? Please help fix this file. I learned a few manual things to fix the SQL database, but I'm not aware of it. Please share it.
-
Outlook express 6 messages bouncing Windows xp
I use my email account Outlook Express 6 for a single computer. Lately all my incoming messages have bounced because of the overload of the byte in the Inbox. I deleted all of the messages in my Inbox so that sent, deleted, ect. I don't know how t
-
Icons of the blackBerry Smartphones transfer between themes.