GUI shows again the old size after expansion VMDK

Similar Questions

• utility based on the Web shows again the old version of the firmware - HELP PLEASE

  In September of last year, I replaced my old Linksys with a new (BEFSR41 ver 4.3).  I started to get in trouble yesterday, so I consulted the web-based utility and noticed that the window says: the firmware 2.0 version!

  I tried to update to the latest firmware available for my model, following the instructions on the site but something went wrong and the firmware has been altered. Finally, I managed to update the firmware via tftp utility, and he said that the upgrade has gone through. But the utility still shows the version of the firmware 2.0.  Under the router > status reads as follows:

  Capture (share.field_33_UI_share) Firmware Version: 2.00.4 build 7, January 20, 2010

  I am very confused. Which is the latest firmware or I get it confused with the 4.3 version number?

  I really hesitate to update the firmware again after the problems I had the first time.  If anyone can give me some advice on what to do, I would really appreciate it.

  You confuse the hardware version of the router with the version of the firmware.

  The BEFSR41 is the model. One physical versions of this model. Each version contains a different material. The exact hardware version is printed on the label under the router.

  The firmware version is the version of the firmware (software) running on the router. It is important that the firmware used is compatible with the hardware version of the router. For this reason, you must select the correct hardware on the router Linksys support download site version to be sure to choose the right firmware compatible with your router.

  The latest version of the firmware of the BEFSR41 v4.3 is Ver.2.00.4 Build 7. You have the latest firmware.

• Records were left on the old HD after a transfer to the new HD.

  During a transfer of my old HD to a new library LR HD couldn't move a few files containing photos (5000) residing on the old HD, producing error messages during transfer by saying that the photos could not be moved.

  
  

  (For the purpose of the present explanation, I use a folder of the year 2003 'AMEXIT' containing subfolders that are relevant for this discussion.)

  
  

  Here is the list of the OLD HD after the transfer, list 2 of only 4 files that have been moved successfully with many others who could not be moved to folders:

  

  (Note that all of these folders contain the same type of file)

  
  

  Here's the HD NEW registration file, showing the 4 files that have been moved:

  

  Still, LR moved only 4 records of the year 2003 and left for other good account. If I try to move all the others in the new HD, (i.e. a named RALEIGH1), I get this message:

  

  Obviously, according to the LR folder list, it does not contain RALEIGH1

  
  

  The finder window MAC shows that LR DID create the folder RALEIGH1 in the new location, but it is empty.

  Use the MAC finder, I deleted the empty folder from RALEIGH1 to the new HD and copied to the RALEIGH1 of the OLD HD to the new HD and then tried to import this file BACK into the LR catalog.

  Here's what happens:

  

  Even if LR now see the folder on the NEW HD, pictures are grayed out and LR will not allow the import in the catalog.

  I guess that LR believes he has already all the photos in the new HD. However, the list of folders to the NEW HD still shows only 4 files as seen in the second picture above, me not allowing no access to the files and pictures that are clearly on the NEW HD

  How can I get these files appears in the LRCAT and why did they not move successfully in the first place?

  Import photos that have already been imported is never the answer.

  As you said that you copied pictures on the new HD (and they are in a folder of the same name), then you should reconnect the photos inside Lightroom. Find files on your old HD in your Lightroom library Module (left, in the Control Panel folder) and then use these instructions (scroll down to the section called "Update folder location")

  Adobe Lightroom - find moved or missing folders and files

• When I remove, move a file, the files still show in the old directory

  Original title:

  Refresh problem with the Explorer of Windows 7;

  When I delete, move a file, the files still show in the old directory... discount seems to be done?

  Sometimes, the program stops.

  All quick & easy Microsoft solution or someone? l

  I have the same problems - I always shows the photo files that have been moved, but they are empty and only appear in some online programs where I load pictures to.

  That is to say

  1 photo folder is moved to picfoldersall... I go to site abc to the peaks of the peak 2 (that have not been moved) project manager and file picture 1 and 2 still show in the pictures folder.

  I ran several anti-test virus and nothing shows that Microsoft, symatics and Comcast, pretend that I have a virus and all want to charge me $ 99 and none have even done a scan...

  So what's up? > I use windows 8

• After sVmotion, VM shows on the old and new LUN

  After the execution of Storage Vmotion, virtual machine appears as on the old and the new LUNS.  Looking into the data store, the directory on the old LUN is empty, so the displacement went correctly.  It seems that something in the config file was not updated.  Anything else I should look at to solve?  The vmx is attached.

  you have a VistaBusiness.iso attached and which points to the old lun?

• Shrivelled partition shows always the same size

  The host comments Win7 Pro 3.0 on SL 10.6.2 merging.

  I created the hard disk from VMware to address initial as 40 GB prealloue. After you run a week, I decided it was a mistake - it was much too large (16 GB is more than enough). I stop the machine virtual, unchecked the box pre-allocated on the hard drive settings, applied, restarted the VM, run VMWare Tools, choose "Shrink Partition", and it did. The hard physical file is now 10.5 GB instead of the previous 40 GB. So far so good.

  However, VMWare settings does not know it is narrowed, i.e. hard disk settings still shows 40 GB and it won't let not the slider be moved immediately to the left. Go in the Win7 Disk Manager, he does not know he is shrunk, either, that is, it always shows 40 GB. I said DM to shrink the partition (it showed 28 GB free), but he told me that he could reduce only 8 GB. I went ahead and did it, and now DM shows three partitions: the system reserved 100 MB, the partition of 32 GB used and now an unallocated 8 GB one.

  How to do everything (VMWare settings, Win7 DM, etc.) to agree on the size, where size is the actual size, for example 10.5 GB? Or, Alternatively, who all agree on 16 GB (and increase the size of the physical hard to 16 GB) are very good, too.

  I googled here and on the web in general and the half-dozen documents I've found so far, all the steps above, but few things related to shrink. Let me know if I missed a.

  Thanks for your help.

  Without using the pré-alloué, you will get never all disk numbers to "agree" unless your drive is 100% of its capacity.  There are at least three numbers to deal with and understand.  Virtual disk capacity: 40 GB (thinking that it is the actual size of the disk), the size of the logical file system partition: usually matches virtual disk (-less overhead), for example 39 GB and allocated space: 10.5 GB (how much space you actually used).  On the latter, Fusion do not show you this value in the user interface.

  As you have seen, you can reduce some putting file systems so a "cap" on the upper limit of size the vmdk virtual will get on the host.  Unallocated space shouldn't be relative, he is just reflecting a gap that is never used.   Think that the capacity of your virtual disk as a credit limit, but you say that I will never ever having a balance of more than $ 500.  It doesn't matter if the limit is triggered or doubled, etc..  You set your own limits, for example the capacity of your virtual disk could be 40, 60, 100 GB, but you already have size your file system to never consume more than 20 GB.  The positive thing is that if you need to grow, all you do is resize the file system, of course if you need more than the current virtual disk capacity, you also up to the size of the virtual disk with the cursor.   Unallocated space in a dynamically allocated file is practically free.

  If you are still not happy having so virtual drive potentialcapacity, you can rebuild the virtual disk to a smaller capacity.  There is no tool to resize the ability down into place.  There were to be (ESX) options but it is dangerous enough for most users, for example if you do not reduce the first file system you can lose data.  It is therefore preferable to force users to migrate their data to a new disk, or with a disk cloning tools like Ghost or Clonezilla (free) Converter from VMware, which allows to reconstruct a new machine of the former.

• Reduce the image size after scanning

  I have a problem, identify ways to reduce an image in size so it's pretty small to put in my remote (it's the words that I am allergic to penicillin in many different languages, preceded by the corresponding indicator).  I can crop the image so it shows just the words and the flag, but then I want to re-size (but this is grayed out in the list). I am at a loss. I've never had an all-in-one before so am probably being a bit thick I know, but you would appreciate the help.

  Thank you. AnneF

  What model is your all-in-one?  What program you use to edit or print the image?

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• I changed the size of the canvas, but active generator still considers the old size than the size of the canvas.

  Some of my possessions are cropped and some cannot be generated because it is off the old canvas. My new canvas is large enough, but the former is not. Why the active generator is not synchronize the canvas size setting?

  Is what type of asset? (dynamic object, bitmap layers in a group, etc.) ? If possible, could you send us the file so we can take a look? My email is [email protected]

  You can also try the Image menu-> reveal all to increase the size of the canvas to display the entire image

• Model Dreamweaver (.dwt) guard returning to the old version after reopening CS3

  I work locally on all files and download necessary.  After the model of science and apply it, I can download all associated fine pages.  If I close DW and reopen, the old version of the model is unchanged - even if I saved the model.

  Also, update the model will change all other web pages except index.html.

  Any ideas?

  Thank you

  Ok.  When I opened DW, the saved version of the model was there.  so...  Try to save your model as a new_file.dwt in the Templates to your local site folder.  Close DW.  Open DW.

  Is the new model?

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

• Why some paragraphs keep the old format after editing while Para Designer please?

  With the help of 10 on Win 7 Pro frame

  I'm trying to change the font and color for a few paragraph with paragraph Designer tags.

  Most of the paragraphs change OK when I click on update, but there are strange paragraphs that do not change with the rest. For example, try to apply changes to the text of the Table changes some cells, but not others, even in the same table. I find it rather impossible to believe.

  Similarly, for some of my numbered lists changes that affect the actual figure number correctly (tested by changing the color parameter), but the text retains the old font and color

  I change my tags offending outside the designer of Para, but I suspect that they will just return to the old style if I close and reopen the chapter.

  Any help please?

  Thank you

  Phil

  Re:... but there are strange paragraphs that do not change with the rest.

  No chance that they have applied character Formats?

• Test server tries to use the old IDs after reboot etc.

  I have just formatted my drive and installed fresh xampp, pulled my web files on the net and got the testing running server.  I can access the pages that use my vidiscript DB, but for some reason when I try to access pages that use the same PB it gives me an error of:

  Access denied for user 'deafboyz_admin'@'localhost' (using password: YES)

  deafboyz_admin is the OLD username for DB, that my remote DB uses, which is painfully different than the testing server.  I updated the DB file and saved and made sure it's correct on the test server.  Restart xampp and even my computer, deleted history of cookies etc and still get this same error.  It makes me crazy b/c my main homepage must use the db file for data and it works perfectly, but video pages it attempts to use the old credentials, which are not loaded in my test server.

  as a solution, I even added the user deafboyz_admin in the db and gave full privileges, reboot, etc and still no luck.

  all my passwords are loaded into the local Database as they are in the file db.  restarted the computer and clear the history, what else could be possibly originally xampp try using the old db details?

  Thank you for your understanding!

  There is always something that connects your video to a file that is trying to connect to the DB by using the credentials of the old. You can share your PHP code with us login script? Also, check that the connection on the video page setting is correctly set in the correct file that contains the new credentials.

• JSF keeps displaying the old values after the failure of the Validation Phase

  Hi all
  I would like to ask for help to understand a given behavior that JSF indicates that the Phase of Validation fails.
  I use:
  
  -Tomcat 7.0.2
  -JSF 1.2_12
  -RichFaces 3.3.3
  
  Description of the problem.
  I wrote a form with input fields 4: an inputText and selectOneMenu 3. There the inputText while the selectOneMenus require no validation.
  Attached to the first selectOneMenu (line 32) is an a4j tag: support, so that, whenever the change event is triggered, the list of items of the second
  and the third (line 44 and 58) selectOneMenu are filled correctly (note that the agent of the inputText is ignored with the ajaxSingle attribute).
  In particular, after the loading of two lists of items, the actionListener requires the value of the second and the third selectOneMenu null.
  This mechanism seems to work fine until I submit the entire form without completing the text entry: as expected, JSF validation fails but if I change the value of
  the first selectOneMenu again (causing a new submission), page guard showing the specified values before JSF validation failed for the second and third
  selectOneMenu (note that the actionListener is still called and the values of the second and the third selectOneMenu are always forced to null).
  
  Since I'm on a simple PhaseListener, I noticed the following: before JSF validation fails, whenever I change the value of the first selectOneMenu, life JSF
  cycle always calls the get method for the second and the third selectOneMenu during the Render response Phase. In this way, JSF is able to 'see' that
  These values have been set to null in the appeal Phase.
  After the validation failure, JSF stop to call these getters when I change the value of the first selectOneMenu.
  
  I hope that my explanation was clear enough, thank you very much for your help.
  
  Kind regards
  Nico
  
  Web page

  <?xml version='1.0' encoding='UTF-8' ?> 
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" 
                        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml"
        xmlns:f="http://java.sun.com/jsf/core"
        xmlns:h="http://java.sun.com/jsf/html"
        xmlns:a4j="http://richfaces.org/a4j"
        xmlns:rich="http://richfaces.org/rich">
  
  <head>
    <title>Prove Rich</title>
  </head>
  
  <body>
  
    <h2>Prove Rich</h2>
    
    <f:view>
    
    <a4j:outputPanel ajaxRendered="true">
      <h:messages style="color:red" />
    </a4j:outputPanel>
    
    <h:form>
    
    <p>
       Input required: <h:inputText value="#{provaProbReplyBean.inputRequired}" required="true" />
    </p>
    
    <p>
         <h:outputText value="Scegli il canale:" />
         <h:selectOneMenu value="#{provaProbReplyBean.canale}">
       
          <f:selectItem itemLabel="--" itemValue="" />
          <f:selectItem itemLabel="Profamily" itemValue="Profamily" />
          <f:selectItem itemLabel="Captive" itemValue="Captive" />
          
          <a4j:support event="onchange" action="#{provaProbReplyBean.caricaProcBanche}"
                                ajaxSingle="true" reRender="procedure, banche" />
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la procedura:" />
         <h:selectOneMenu id="procedure" value="#{provaProbReplyBean.procedura}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.procedureList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la banca:" />
         <h:selectOneMenu id="banche" value="#{provaProbReplyBean.banca}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.bancheList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p><h:commandButton value="Submit" /></p>
    
    </h:form>
    
    </f:view>
    
  </body>
  
  </html>

  Bean

  public class ProvaProbReply {
  
       private String inputRequired;
  
       private String canale;
       private String procedura;
       private String banca;
       
       private Map<String, List<SelectItem>> canaliProc = new HashMap<String, List<SelectItem>>();
       private Map<String, List<SelectItem>> canaliBanche = new HashMap<String, List<SelectItem>>();
       
       private List<SelectItem> procedureList = new ArrayList<SelectItem>();
       private List<SelectItem> bancheList = new ArrayList<SelectItem>();
       
       public ProvaProbReply() {
       
            List<SelectItem> l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Cessione del quinto"));
            l.add(new SelectItem("Credito al consumo"));
            l.add(new SelectItem("Mutui"));
       
            canaliProc.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Credito al consumo"));
            
            canaliProc.put("Captive", l);
            
            l = new ArrayList<SelectItem>();
            
            canaliBanche.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("BDL"));
            l.add(new SelectItem("BM"));
            l.add(new SelectItem("BPM"));
            l.add(new SelectItem("CRA"));
            
            canaliBanche.put("Captive", l);
       }
       
       public String getInputRequired() {
       
            return inputRequired;
       }
       
       public void setInputRequired(String ir) {
       
            inputRequired = ir;
       }
       
       public String getCanale() {
       
            return canale;
       }
       
       public void setCanale(String c) {
       
            canale = c;
       }
       
       public String getProcedura() {
       
            System.out.println("\ngetProcedura called\n");
            return procedura;
       }
       
       public void setProcedura(String p) {
       
            procedura = p;
       }
       
       public String getBanca() {
       
            System.out.println("\ngetBanca called\n");
            return banca;
       }
       
       public void setBanca(String b) {
       
            banca = b;
       }
       
       public List<SelectItem> getProcedureList() {
       
            return procedureList;
       }
       
       public List<SelectItem> getBancheList() {
       
            return bancheList;
       }
       
       public String caricaProcBanche() {
       
            System.out.println("\nListener called\n");
       
            procedureList.clear();
            bancheList.clear();
            
            if(canale != null && !canale.equals("")) {
            
                 procedureList.addAll(canaliProc.get(canale));
                 bancheList.addAll(canaliBanche.get(canale));
            }
       
            System.out.println("BEFORE setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            procedura = null;
            banca = null;
       
            System.out.println("\n\n\nAFTER setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            return "";
       }
  }

  Published by: 869000 on 14.05 giu-28-2011

  I think it has to do with the fact that the UIComponents use the localValue after the validation failure. This prevents values are overwritten when the re-rendering of the page, i.e. the entries keep the value defined by the user.

  The solution is to manipulate the components directly in the AJAX request, when the first drop down menu is changed. Use the binding attribute to place them in your beans and clear the value directly. In this way, that it won't matter that the expression is not evaluated.

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• On the screen keyboard, how to restore the original size after maximizing

  I used the Task Manager to maximize the on screen keyboard and now to restore its original size, but can find no way. XP MCE SP3.

  Thank you, but no joy there.

  Gathered the courage to dig into the registry and managed to restore the osk, so, for recording answering my own post. After some nosing around, I ended up export

  [HKEY_CURRENT_USER\Software\Microsoft\Osk]

  a user account who have an osk immaculate and imported to the account with the enlarged osk... it worked. Parameters has dozens of bytes, and 13 were different between a regular osk and a maximized. Anyway, problem solved.

• My 'C' drive is almost full to bursting. Can I transfer some of the old windows after have updated them my drive "D"?

  My computer shows that my 'C' drive is almost full and advised me to transfer some of the programs on. But going through the list, I discovered that most of the proms has in my 'C' drive are windows, most programs had been updated but with different codes. I want to transfer or delete, but I don't know which of them can be done safely without affecting my computer work?

  Concerning
  Philip Tan

  Hello PhilipTanams,

  You will not be able to move the files to the C: drive on another drive Windows. All Windows files must be in the C: drive.

  Method 1:

  If you have personal files or data, you can move these files to another drive that increases the size of the C: drive by adding
  Method 2:

  If you have any other partition which has an empty space in it, you can extend the C: drive by adding the empty spaces to the C: drive.

  See the links to find out how to extend the partition of drive.

  Extend a Basic Volume in Windows 7

  Expand the disk volume using the command line