Guidance on the perimeter ACL

Similar Questions

• Reset home folder permissions and the default ACL on macOS Sierra?

  A tool that I've used in the past to troubleshooting doesn't seem to be available in macOS Sierra.

  There was a procedure in el captain to reset the permissions of file and ACLs in start in recovery mode, by running the command terminal, resetpassword.  This command pulls up a GUI in Sierra as el cap but the "reset the user permissions and ACLs" option is no longer there.

  This article describes the procedure to el captain

  http://appletoolbox.com/2016/07/fix-corrupt-user-accounts-MacOS/#For_El_Capitan _ andmacOS

  Is there another way to reset the permissions of the user and the default ACLs on macOS Sierra?

  If you are looking for in the forums on the topic and limit to messages by Linc Davis, he posted a script that will reset everything.

• More light band/border around the perimeter of display

  I searched this forum and find nothing... But I found mention of it here: http://forum.xda-developers.com/showthread.php?t=1207312 and elsewhere on the Web. I can't say exactly when it started, but I can't believe that I missed it when I bought the phone in February. There is now a pale whitish band around the perimeter of the screen maybe a 1/4 "wide. The feathers of tape slightly to produce a fine white line along its border inside. I see it on the home screen, and any time there is a dark background. This is especially noticeable with the gray background of the screen settings-display-brightness and the like.

  I have to assume that it came with gingerbread. Someone else?

  Thank you

  Harris

  It is a defect in the display. My 2nd phone atrix has had this problem. Return the phone for another.

• Add to contacts to work the perimeter, also citing maps in the scope of work

  I have a native app for BlackBerry 10 for the container/perimter of work.

  I would call add to contacts and also able to summon cards in container/scope of work.

  If I have an application in the work bowl, all invoke applications will happen in the container to work alone? When I make the call, his phone calls in the container to work. Now I need to access email, calendar, cards, add to contacts, and let me know that everything an application in the perimeter of work container will call PIM functions within the perimeter of work only.

  I want examples of code to add to contact and invoking maps in the perimeter of work scope app...

  Really, any help would be apprciated.

  Invocation framework is restricted within the perimeter you call. Therefore, if your application is in the scope of work, you can only call call targets that are also available in the scope of work.

  For contacts and calling card, please refer to this page:

  https://developer.BlackBerry.com/native/documentation/Cascades/device_platform/invocation/invoking_c...

  Shadid

• command - v ifconfig in the perimeter of work pays less interfaces

  someone has already tried the command "ifconfig - v" via QProcess in the scope of work?

  inside the perimeter of work you get only certain interfaces listed:

  and the most import those - interfaces belonging to cellular networks.

  not listed

  do I need a particular configuration?

  Alternatively, the cellular traffic is only listed in the scope of personal work?

  or are there other ways to get traffic inside permiter work? ESP. companies want to know the traffic of their employees

  Sorry no, I don't think that there is a way to capture that in the perimeter of the enterprise.

• blackberry.pim.contacts.Contact.save () does not work in the perimeter of the company

  I created a contact. Then, I saved the contact. Everything works fine in the personal area.

  var createdContact = blackberry.pim.contacts.create();
  // Adding properties here
  createdContact.save(onSaveContactSuccess, onSaveContactError);
  

  But in the perimeter of the company, I get:

  blackberry.pim.contacts.ContactError.INVALID_ARGUMENT_ERROR

  When save() is called.

  Can someone confirm this behavior?

  Well, it works today. Perhaps, allowed the restart of the unit. I will study it further.

• Method to reset the default ACL of support?

  In Windows 7 Professional x 64, is there a supported method to return all ACLs (access control lists) to their default settings that do not need to reinstall Windows?

  I ask because well-meaning Web sites advise to use subinacl or secedit for this. I want to know if these are methods supported. I don't want to risk the integrity of my installation of Windows. If the only supported way to reset ACLs is to re - install Windows, I need to know that.
  If not, is there a web page somewhere, perhaps on a Microsoft Web site, which shows what are the default ACLs?

  Hello

  I suggest you link and check if that helps.

  How to restore the security settings to a known working state?

  Note: Applies to Windows 7.

  Subinacl or Secedit commands do not support Windows 7. However, for more information I suggest you send your query in the TechNet forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  It will be useful.

• How can I use Windows 8 to adjust the size of my desk? He 'overflows' the screen about two inches around the perimeter.

  He 'overflows' the screen about two inches around the perimeter. Example: The clock in the bottom right is almost invisible.

  I don't need to change my resolution and cannot do with my monitor. Also, I don't speak of re-sizing the interface, not the wallpaper.
  What kills me is that I did this work before and he doesn't remember how!
  I have the latest drivers for my card AMD (helps nothing in the Catalyst Control Center) and the generic PnP monitor.
  How can I get instead of Windows 8 which allows me to adjust the size of the screen (no icon or text size and no resolution)? Am I crazy, or was it easy to find before?
  Thank you!

  Hello

  This looks like a problem of scale .

  Open the Catalyst Control Center.

  Expand the section My Flat-Panel digital .

  Select the item Properties (digital dish) .

  In the resizing of the Image section, place a check in the option enable GPU scaling .

  Select the image of the scale to the size of the full screen .

  Click Apply/OK.

  Test and let us know the results.

  Concerning

• Remove the black fill from the perimeter of raster symbol?

  Hello!  I have an image file of a symbol (attached) which includes a black border I want to remove.  Illy don't make a clipping mask - how can I cut/trim the black exterior far symbol yellow and blue?  End result, the PS will be export to emf for placement as a "symbol of the photo marker" in another program, so a white blanket is not an option.  Thank you!

  Simply draw a path around the perimeter of the symbol, select this option and the image and object > clipping mask > make.

• With the mouse to draw the edges of a XY Chart to calculate the perimeter and area of him

  I have signals from a stabilometer... I traced X in terms of y in a XY Chart and I want to know how I can draw with the mouse a circle linking most of the points that is the graph of X on Y and calculate the area of her more perimeter. I joined my program labview with two files X and Y

  LV 2009 Version attached.

• On the basic ACL question

  I have a few question ACL. I'm not clear on the source address and the destination address in the following cases.

  Case 1

  My IP WAN1 is 1.1.1.1, my FTP server is 192.168.1.2 port 23

  If I have access to FTP from internet, use ftp://1.1.1.1:23, so what's my IP ACL of source and destination IP? 1.1.1.1 is source? destination is 192.168.1.2? or any?

  Internet-(Outside 1.1.1.1) ASA (inside 192.168.1.1) - FTP (192.168.1.2)

  Case 2

  My WAN1 is always 1.1.1.1 and FTP is 192.168.1.2 port 23

  If I use the ftp://1.1.1.1:8023internet FTP access, what the ACL source IP address and destination?

  I tested in both cases = any source and destination = everything is OK.

  But I confused. I still think the Source address is IP WAN1.

  Hello

  You access the server FTP from the Internet and most likely, you won't know what ip address you will be source. In this case, your source ip address will be everything. If you know the ip address on the Internet that will have access to your FTP server, and then you specify it as the source. You access list will be as follows:

  access-list extended 100 permit tcp any host 1.1.1.1 eq 21

  access-list extended 100 permit tcp any host 1.1.1.1 eq 20

  or

  access-list extended 100 permit tcp x.x.x.x y.y.y.y host 1.1.1.1 eq 21

  access-list extended 100 permit tcp x.x.x.x y.y.y.y host 1.1.1.1 eq 20

  (if you know the network or host who will have ftp access)

  You must also make sure that you have configured static NAT and inspection of the request to your FTP server

  Thank you

  John

• command to erase the hit ACL County and stats interface

  Hello

  Does anyone know a command to erase the HIT count on an ACL and a command to clear the counters on an interface for the PIX? I can't find it anywhere. Any help would be appreciated. Thank you.

  The f

  Hello

  Try the command:

  > access-list clear counters

  This clears the counters displayed by the show access-list command.

  To delete counters on an interface, enter configuration mode and issue this command: clear int ethernet0

  (You must be in config for this command mode works.)

  Speed/duplex, once spending config mode and type this command: interface ethernet0 100full

  In addition, the following URL might be of interest...

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172786.html#1112250

  Hope this helps - thanks, Jay

• Ipv4 and ipv6 on the same ACL line vty

  Hello everyone.

  I just want to confirm if I can protect a router (telnet and ssh) put 2 ACL (an IPv4 and other IPv6) on the same line vty. Something like:

  line vty 0 4 access-class hostsIPv4 in ipv6 access-class hostsIPv6 in

  I have to use named ACL?

  Thanks in advance

  Yes,

  You can do it.

  line vty 0 4

  access-class 60 in

  class to access acl-ipv6-IPv6, in

  transport input telnet ssh

  Kind regards

  Herbert

• The SG300 - ACL support intervlan routing

  I have Setup SG300 - 52p mode switch layer 3.

  I have 3 VLAN (10,20,30) and the affected ports to each vlan.

  Each host can ping its own gateway (according to the VLAN).

  I want to enable some of the traffic of a vlan to a specific host (server) on a different VLAN. I try with ACL, but no can do.

  Can someone help me how to do this?

  Thank you very much.

  Hey Ruy,

  My isa very restrictive ACL.

  Restrict_FTP extended IP access list

  permit ip 192.168.10.0 0.0.0.255 192.168.20.10 0.0.0.0

  output

  It allows only the 192.168.10.0 network to get host 192.168.20.10 IP host.

  There is also perhaps (in red);

  Restrict_FTP extended IP access list

  permit ip 192.168.10.0 0.0.0.255 192.168.20.10 0.0.0.0

  deny ip 192.168.10.0 0.0.0.255 192.168.20.0 0.0.0.255

  allow a full

  output

  I must confess that I prefer to use the GUI to produce my ACEs.  The table he creates shows how the ACL will work. and especially in what order.

  • The switch through ACEs in order from top to bottom as seen in the GUI.
  • The ACL that is attached to an interface, boss of matching incoming packages (coming into the switch).
  • ACE entries use reverse masking can be confusing.  Perhaps the following tehnote may be useful for understanding the inverse of masking;

  http://www.Cisco.com/en/us/products/sw/secursw/ps1018/products_tech_note09186a00800a5b9a.shtml

  What about Dave

• ASA 5505 in router Mode can implement the MAC ACL

  Hi all:

  My client request can the Cisco ASA 5505 implement MAC ACL in Cisco ASA 5505, who is now running in router Mode.

  Can anyone help answer this?

  I tried to search the document and also tried the ASDM in the Cisco ASA 5505 but couldn't see a way to do the ACL by MAC address.

  At the same time can also help me find the command line using the ASA 5505 able to run MAC ACL in router mode?

  Thank you very much!

  Warm greetings,

  TangSuan Tan

  MAC ACL is not supported in Routed mode, only in Transparent mode.

  Here is the command for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/A1.html#wp1598101

  And here is the ethertype supported:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/access_rules.html#wp1083699