Remove the black fill from the perimeter of raster symbol?

Similar Questions

• How can I remove the black of an image?

  How can I remove the black of an image?

  Al

  Hi albertreeder,

  Greetings!

  It will be helpful if you could post the image and let us know if you try to remove blacks or black background of the image. You can try the following steps.

  • Select your layer.
  • Choose layer > layer Style > blending Options. (from the menu bar)

  

  • . If you want to hide a black background, drag the slider to highest point.

  

  There are other methods too.

  • Select > color range.  Use the eyedropper tool to select the black of your image, bring the Blur slider to zero - which allows to select only the black pixels. Then, you can fill these pixels with a different color. Refer to select ranges of colors in Photoshop

  Kind regards

  Assani

• iPhone 6 s is not wake up when you remove the cable from the charger.

  Hi all.

  I noticed that sometimes my iPhone didn't wake not (the lock screen display) when the charging cable is removed. the charger / sync port seem otherwise works normally.

  Is this normal?  I'm guessing that this happens because sometimes when the battery is fully charged, no power goes to the phone and if you pull the cable then, the phone can't tell you have removed the cable, but I have not seen this happen on my previous phones.

  Thank you!

  Yes, this sounds like normal behavior! On my iPhone 6, when it reached 100% of their capacity and is completely loaded, as it stops in charge, which is why when you unplug the iPhone from the charger the screen does not automatically wake up, because the charger stopped output power to the iPhone when it finished filling. I hope that answers your question!

• Windows Live Messenger - remove the desktop icon and prevent them from running automatically at startup

  original title: Windows Live Messenger!

  Windows Live Messenger fills every time computer screen is turned on with an icon on the right lower bar of the screen of the task.  How do you keep what automatically appear on start up and how to remove the icon from the taskbar

  TKS

  In the options of windows live, go to the sign in tab, and clear the check mark "automatically run windows live messenger when I connect windows", as shown below.

  

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove the unwanted parts of drawing black and white line

  I scanned in a flower art simple black and white lines.  I would like to remove some of the petals in Photoshop.  How can I do?

  Thank you

  I would like to remove the petals from the background.

  1 method: with the select magic wand the white bg, select-> invert the selection and create a layer mask.

  

  The layer mask is a monochrome picture, transparent black, white is opaque and anything in between is more or less transparent.

  You can now select the layer mask, use the brush and black paint, where you want to have something white, removed where you want to have something added. It is non-destructive and works very well on your photo.

  

  You can use shift click to 'draw' the small lines to attach to the top. According to the clarification, it will take more or less time. As I said are non-destructive.

  Second method: you use the pen to draw the lines around your flower vectors. With little exercise, you'll very quickly and you can always adjust the curvature of your curve, by pulling on the handles of the curve. Here you can see how it works: drawing with the pen in Photoshop tools .

  When done with the pen tool, you can add the vector line as a vector mask. You can even refine your mask after finishing. I suggest, since a mask of course work at a refined mask.

  The flower should not be on a layer, a background layer. Basemap layers have no transparency. The two methods are non-destructive, so you can return to the original image or parts of it, whenever you want.

• Can't remove the battery from dm4-1162us laptop

  I bought a dm4-1162us on Black Friday and it just opened Dec. 9.

  I started the program installation, as indicated, and the first order of the day is to insert the battery. It has been very difficult to insert, compared to the laptop PC battery much, I have added/removed over the past 18 years. (Also, I'm a female light weight with near-frostbitten fingers, so I couldn't use Brute Force).

  When the battery have CLICKED into place, she jammed the release button, too, and I could not remove the battery. I took it to the Office Depot, where it was purchased, for a GUY to watch, and they agreed that there was PAPER jam.

  Is this normal for this laptop? I know it's a new model number, so you have perhaps not seen this problem before.

  I have not registered the laptop, since I can exchange this defective for a dm4-1160.

  Thanks for any advice in this FRUSTRATING matter! I like what I've seen of the features, so far, but him have not yet "taken for a drive on the internet' still...

  Deb

  Hello

  I would take the offer from the other stores in the Exchange or replacement.  If the battery is currently blocked in Notepad, you have no way of knowing if any defect or the terminals of the battery terminals on the PC.

  Best wishes

  DP - K

• How to remove the black bars after image rotation

  I am very new to the use of first pro. I took a video with my smartphone like the contents of a project.  The original size is 1280 wide and 720high.  I imported the video and needed to rotate 90 degrees.   Instead of the scale I need tall. I imported and then under effects control - motion - rotation to rotate how I wanted.

  But now on the screen has black bars on the sides from the turn, and when I export the video basic settings is grayed out so I can't change it. It is game/set at 1280 x 720 with black bars.

  How can I remove the black side bars in first pro to fit the dimensions of the video shot recently?

  Great! I'm glad to hear it. Thank you for the presentation of reports. If you don't mind, please mark my answer as "Correct".

  The reason for which the clips were 56% was so that they would hold the frame of landscape size. Once they were they belonged, they were happy to 100%.

• Remove the fill color of the field box on the deselection.

  When a user selects a check box, the field is colored yellow. Unfortunately, when the user disables the check box, the color remains.  I know that I need a statement to remove the color from the deselection, if/else, but can't quite get the right script. The checkbox named LEPID is my pig of India and he still has the nonfuctioning script that I worked with. Can someone tell me how to remove the fill color when the box is unchecked?  Thank you!

  Hi again,

  You had a few errors in the script:

  (1) in condition you should you use == instead =.

  (2) if (condition) but not if {condition}

  It's working script:

  If (this.rawValue == '1') {}

  this.fillColor

  = "244,254,114";

  }

  else {}

  this.fillColor

  = "255,25,128";

  }

  See also attach.

  BR,

  Paul Butenko

• How can I delete an email from apple mail after removing the content (by virus scan software?)

  Recently, I received an avalanche of emails with malicious attachments.  I have not opened any of the accessories, and my antivirus software has picked up malicious content and removed from the email.  Thus, I find myself with an email on my system, no content.  Unfortunately, the system does not allow me to then remove the (s) e-mail that is left.  How can I remove these 'empty' emails in my Inbox mailbox?

  ... my antivirus software has picked up malicious content and removed from the email.

  Allowing something to edit the database of e-mail will result by it becomes corrupted.

  If you use Time Machine, restore the email by "entering Time Machine" of in Mail and choose a time to restore. Then, just delete suspicious e-mails in the usual way. Exit full screen before entering Time Machine.

  You may not use software "anti-virus" not Apple on a Mac, for this reason and many others. Identify the product you use to get the uninstall instructions.

• I want to remove "list of pocket" from the top of my favorites.

  This is a link that leads me to the Pocket web site that appears at the top of my favorites under "show all bookmarks". When I click on it it is there no option to remove this bookmark. I have not installed Pocket. I looked at and I'm not interested. I don't want to give up a valuable real estate at the top of the bookmarks.

  I read a lot of posts and the help page on how to remove it from the toolbar is not relevant (is not here).
  I also tried to disable the subject Pocket: config by activating / deactivating false values.
  Nothing helps. He uses a lot of space and in the public eye, I find it very annoying and I would like to remove it.

  If browser.pocket.enabled is set to false on the topic: config page then you will need to undo this and set the pref to true to reappear the Pocket button.
  Make sure that the button of the Pocket is placed on the Navigation bar, you can click this toolbar button and use "Remove from toolbar" to turn off Pocket properly.

  You can click on the button of the Pocket (except Pocket) and click on "Remove from Toolbar" or "Remove menu" to turn off the Pocket and move the Pocket to the palette to customize button.
  That will remove the 'Pocket display list' entries in the bookmarks menu.
  This only works if browser.pocket.enabled = true
  When you have moved the Pocket to the palette to customize button and the Pocket in the bookmarks Menu items are hidden, then you can turn off the Pocket and change these preferences and close and restart Firefox.

  • Browser.Pocket.Enabled = false
  • Browser.Pocket.API (net value)
  • Browser.Pocket.site (net value)
  • https://support.Mozilla.org/KB/disable-Pocket-Firefox

• I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I'm not

  I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?

  Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?

• How can I remove the button from menu? The custom option doesn't seem to work for this.

  How can I remove the button from menu? [This IChing looking for three line on the toolbar icon].

  The tool bar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I would trade on the NoScript icon.

  Hi, I can not recommend that you do, but if you are really determined, this article can help.

• How to remove the colors of the table of characters fill colors

  Hmm. I got to ask questions of the pages for Mac screen, but it looks different from what I've seen in the past. So, I hope I'm in the right place. Over time, I selected some colors in the color popup in the character frame and saved.  I tried to change a color by changing the opacity. Then I tried to save this color has changed for the lines at the bottom of the pop-up window.  It did not work. I would have saved the color that appears in the large square on the left.  Anyway my question is how to remove these incorrect colors lines down.

  I know that this little logical so I am attaching the screenshot I'm talking about.  I want to remove the three red squares, two on the line and the other on row down all in the middle of the screen.

  

  Thanks for your help.

  EHW

  HI ehw.

  This is the right place. He underwent extensive design of the overnight changes.

  don't think that you can "erase" the colors that you place in the custom palette, but you can replace them easily using the same method the first time:

  Set up color using the sliders or the color space, and then drag the big box and drop on the color you want to replace.

  Here I replaced two red with white.

  

  Interesting change of color of the header between the two images. Both are screenshots, the left using shift-control-command-4 then pasted from the Clipboard to an empty page in the Pages, the right is the actual color palette. Both were then with SHIFT-command-4 to maks a file that was then inserted here.

  Curious.

  Kind regards

  Barry

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,