Guide display

Similar Questions

• Windows Media Center Guide - no data

  After doing an update, windows media center TV guide display more data... said 'No data available' went to settings, put in place the guide... guide downloads, but will not display the show there. ????

  What day?

  If this value is the cause might find you it under Add/Remove programs? If, then uninstall it and check again the question.

  You can also "Run Setup Again" [Open WMC > tasks > settings > General > Windows Media Center Setup > run Setup again]

  You can also try the system restore.

  Select any restore point when everything worked well.

  S.Sengupta Media Center MVP

• Why my ruler guides keep disappears when I place them on the Web?

  I work with Adobe Fireworks CS4 and continues to be the strangest thing.  When I bring a guide on the canvas and release the button of my mouse, it disappears.  It is now a luck of the draw.  Sometimes they stay, sometimes they won't.  I don't know what is happening.  When I drag them from the top of the sovereign, they normally stay, but sometimes they disappear there too after I release my mouse.  Any suggestion would be greatly appreciated right now.  Thank you!

  This seems odd. Have you tried to check the view menu, markers, to check the Guides display has been selected? It should not be necessary, because a new guide of the rule will usually activate this option anyway, but it's the most obvious suggestion.

  The next time that a guide disappears, you might try the shortcut command-Shift-Z to trigger 'Repeat add Guide' and see if it brings back. (This command is also available under the Edit menu.)

  You have the Guides panel installed? Is not directly relevant, but it's a tool really good to work with guides, and I was curious that you encountered the same problems when using the Panel to create placemarks.

  http://www.Adobe.com/devnet/Fireworks/articles/guides_panel.html

  The only way I can get a guide to disappear spontaneously, is if I drop out of the surface of the canvas...

• Eva 6100

  Hi all

  I have restarted an old Eva6100 view command. When I powered it under a disappeared from view of the command. Need help bring back to life.

  Many thanks for any advice,

  Asorin,

  You want to ask this question on the HP business community which is a separate instance.

  I think this link you will get to the right area of your choice.

  Disk-Based Systems - HP Enterprise Business Community

  Documentation

  HP EVA 4000/6000/8000 and EVA 4100/6100/8100 User Guide - display

  Good luck.

• HP G71-340US how upgrade RAM?

  I have a HP G71-340US running every day more slow. It has 4 GB of RAM. How can I put him? The specifications of the product reveal 8MB while the maintenance and service guide display a maximum of 4 MB. Which is correct?

  Yes, you can upgrade to 8 GB, but you must install 64 bit OS to get the full support of 8 GB, 32 bit OS only supports 4 GB... maybe you repair said that...

• Adding image problem...

  I did tried to add images to the MyAppScreen

  SerializableAttribute public class MyAppScreen extends form {}

  }

  and found this code on the BlackBerry Developer site

  import javax.microedition.midlet.*;
  import javax.microedition.lcdui.*;
  import java.io.*;
  
  public class DisplayAnImage extends MIDlet
  {
      private Form mForm;
      private Display mDisplay;
      private Image pngBackground;
  
      public DisplayAnImage()
      {
      }
  
      public void destroyApp(boolean flag)
      {
      }
  
      public void startApp()
      {
              mDisplay = Display.getDisplay(this);
              mForm = new Form("MIDlet Developer Guide: Display an image.");
  
              try
              {
                  pngBackground = Image.createImage("test_image.png");
                  ImageItem img = new ImageItem("bg",pngBackground,
                  ImageItem.LAYOUT_EXPAND,"background");
                  mForm.append(img);
                  mDisplay.setCurrent(mForm);
              }
              catch(IOException e)
              {
                  System.out.println(e.getMessage());
              }
      }
  
      public void pauseApp()
      {
      }
  }
  

  QUestion! How i can display image with this code ... Or can you give me other advice for display image?..
  

  This code is a j2me code, not a blackberry.

  http://www.BlackBerry.com/developers/docs/7.1.0api/NET/rim/device/API/UI/component/BitmapField.html to view an image and http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/system/Bitmap.html#getBitmapRe... to read fropm your resources folder.

• APIC to level 1.2(3h) 1.3 (2f)

  Hello

  I want to upgrade the APIC 1.2(3h) to 1.3 (2) and looking at the procedure level and recommended paths to:

  https://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/ACI/APIC/SW/1-...

  Apparently from 1.2(3h)...  I can not move to 1.3 (2f)... from 1.2. (2)...:(est-ce exact?)  If so I have to go down first to a 1.2 (2)... :(

  Any comment on that, someone at - he already tested 1.3 (2f)... I am very interested in the MicroSegmentation with vMware dVS

  Kind regards

  Bruno Fernandes

  Bruno,

  The guide displays the output of 'from' and ' to ' the target version.  The "de" in the minimum required to get out.  In your example 1.2 (2) is the minimum version to upgrade to 1.3 (2).  Release them after 1.2 (2) in the 1.2(2x) or later will be support for an upgrade to 1.3 (2) unless otherwise stated.  You shouldn't be required to downgrade to move to a higher version, unless there is a fault that prevents you.  So you should be good for an upgrade.

  I hope that helps!

  T.

• text won't move correctly when the text box is moved, how to fix?

  Working with someone elses files and it seems that he has a setting enabled in his ID CS4 that we cannot understand.

  It has a text box with text on a document.  When you move the text box upward or down with the arrow keys, the box moves, but the text does not.  When you move upward or downward far enough, the text seeks to realign itself back in the box.  The best description of it is as if there is an invisible box above and below with wrapping turned on... but I know its nothing like that.  What is the cause?

  Looks like line up on the starting grid...

  Bring up the grid with view-> grids and Guides-> display base grille.

  Change the grid settings in Edit-> preferences-> grids

  In a paragraph style, go to the withdrawal and spacing to change the settings for alignment grid

  If your text has no style paragraph assigned... uh... uh... I have no idea how turn it off

• HP ENVY 15 Notebook PC J6P01UA: Viewer guides hp force display of user's guides in word

  At the opening on the user guide HP for the first time on a new HP laptop, I was presented with an option to view the user guide in Word or PDF and maybe other choices.  I have happpen to choose the WORD.  Big mistake.  It was unknowingly a permanent and irreversible choice with no parameters to return to the display guides the user in PDF format. Now whenever I want to watch the user's guides through utility centre (including the help Wizard or Documentation HP) HP, it throws me a conversion unwanted and responsible for warning in Word format).  I didn't have a conversion to Word, nor have I received a warning that a viewling option was irreversible.

  How to reverse it so that when I use the HP Center utility, I either get a choice to watch again the options or manuals in PDF format?  There must be a setting stored at a place that can be undone.

  I know I can work around this problem by downloading the manuals and do not use the center of the HP utility.  I prefer to solve this problem, so I can get updates and to find the manuals to the more intuitive location, and who knows - really interest me this option

  to view a day manuals in various formats.

  Curiously, the option of language/country is presented each time.  I can undo an accidental choice of manguage, but not format.  These two options should be saved and editable somewhere in the center of the HP utility.

  Hello

  Please try:

  b/open files from Windows Explorer.

  (b) right click a pdf file (known).

  (c) click on properties,

  (d) click on edit

  (e), select Adobe Reader.

  If no Adobe Reader on list. Please download and it:

  http://www.Adobe.com/support/downloads/product.jsp?platform=Windows & product = 10

  then try again.

  There is a product called "Reader", you can select it but my suggestion: use Adobe Reader, much better.

  Kind regards.

• The Electronic Program Guide (EPG) for Windows Media Center stopped display information guide

  The Electronic Program Guide (EPG) for Windows Media Center stopped display guide information beginning January 1, 2013 in the United Kingdom and Ireland.

  Microsoft is aware of the issue with the Electronic Programming Guide for Windows Media Center in the United Kingdom and Ireland.  We have identified the cause and have already deployed a fix for the United Kingdom.  A solution for the Ireland is being prepared and we will post an update when the problem is resolved.

  We apologize for the inconvenience to Windows Media Center users in these countries.

• Adobe Muse: Highlight of fixed width (red color I think!) guide is not displayed? Where is he?

  I am trying to create a fixed width and I drag my box on the edge and no guide introduce you?

  Have I not the guides showing or something? in any case I hope I described it enough...

  Thank you for anyones help.

  Usher357

  I think I found the answer myself:

  IN the preferences of muse (with no documents open) / selection display / Smart guides

• Display the form guide in the browser using ES2

  I am making a form guide in worspace and in a browser so that you can access the guide via a url outside the workspace. Can someone refer me to a good guide or tutorial for that.

  Thank you

  Making the guide in the workspace is very easy and fast. Just point the guide in the field of the action profile.

  To view the guide in a browser, I created a simple process

  who calls the rendering process Guide (in the application of the (System) Guide). It's a generic rendering engine which accepts a URL to indicate which guide you want to view as a TargetURL to update the button submit for presentations. I then uses the Rest interface to call my process and here is th eguide gets displayed. Does make sense?

  Paul

• Why won't tv guide ads display Web site?

  This just started happening. All updates applied. The site works correctly when you use Internet Explorer. I have installed NoScript, it says to "temporarily allow all the" without change. It goes the same for Adblock Plus, I disabled it for tvguide.com and still no change. In addition, any link on the page don't work. The URL will change, but the page remains that the image included.

  TitanTV site still works, but I use it rarely (it displays wrong channel numbers).

  I have not had problems with any other Web site (so far).

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• HP graphic calculator first: first RPN - battery display of items not in compliance with the User Guide

  In the HP User Guide first, in the section on page 48 RPN, the image shows the battery watch algebraic views of right which was calculated on the left side of the line battery, with responses on the side of each line in the stack.  When I do the same calculations, I only get responses from the right side.

  Is there a parameter that represents the lines of battery as in the user's Guide?  I can't find it if it's there.

  Thank you

  Nick

  The guide I think you are referring is the guide of July 2013.  These pictures no longer exist in new versions of the user guide.

  I haven't met a setting that causes the behavior used in these pictures.

• The Electronic Program Guide (EPG) for Windows Media Center does not display an information guide from 22/03/2014

  The COMMENTS in the shows of the start/end dates of guide to 07/03/14 and parameters on 22-03-14, respectively.  It's like leaving the guide update after 3/7.  Please notify.

  It's working now.