GW 3610

Similar Questions

• 3610 C & Lync with AMGW VCS integration-

  Hello

  I have a client interested in integration of Lync with an AMGW-3610. He wants to use the AMGW for calls of some but not all. I wonder if there is a way to differentiate (prefix?) throught AMGW calls and other calls (direct media between Lync and endpoints) and to "create 2 different routes?

  With regard to the way in which the integration of the LYNC/VCS works I don't think that it is possible, but maybe I missed something...

  You have an idea if it is possible and how to do this (and any restrictions)?

  Thank you

  Best regards

  François

  You should be able to do it on the VCS under Applications > B2BUA > Microsoft OCS/Lync > transcoder policy rules

  Have an allow rule for the uri that you want to use the AMGW and a default deny to a lower priority to stop all

• TC520: HPDM 4.7.3610.23043 - cannot deploy images... error message 1080320

  Hello world

  We have not deployed any image TC520 for a few months.  I tried for a few days now, and we get an error.

  Nothing has changed (as far as I can see) in the past months.

  Deposits are still there and can connect on the TEST page.

  The images are still there... and have not been changed.

  TC520 are the same machines TC520

  The HPDM and the client, the version numbers match...

  I can reboot/update etc customers... just imaging that is a failure

  So, fundamentally, nothing has changed.

  But when I deploy an image, I get

  Refusal to execute the task DeployImage.

  2016-08-15 16:20:44 [error details]: deploy the image by using the master repository repository.
  Failed to deploy T520_Vanilla_2k7.ibr/Repository/Images/T520_Vanilla.
  Cannot run the task DeployImage.
  Error code: 1080320, error Info:...... \Task\wins\ImageTask_XPE.cpp@392: cannot run the script to repack wes.
  .. \.. \Task\wins\ImageTask_XPE.cpp@2416: error running script to repack
  .. \.. \Task\wins\ImageTask_XPE.cpp@2414: run = - 200 process return code. Command = C:\repack\Wes7ImageTool\bin\ImageTool.exe f C:\repack\Wes7ImageTool\Config.ini

  Any ideas?

  TIA

  Craig

  I suggest that you use 4.7 SP2 or later version. From SP2, we use the PE of the DM repository instead of the local device.

  This should be able to resolve the problem that you are experiencing.

• 4.6.3610 imaging of the failure of 5.0 t510 HP ThinPro HPDM

  I am struck the wall here, I can't understand why I can't image my peripheral t510 HP. I get the error message below. 'Image Operation Failed' - I can't know all the more verbose errors to go off of. Any help?

  

  Hey guys, found the question. This is because the account used for "anonymous" authentication did not have access to write to the repository. Add an account here, went around:

  

• CAN´t enable VGA - Predator G 3610 (please help!)

  So what I understand, it's that I need to activate hollow VGA BIOS, but it seems I can´t find the option to enable VGA.

  I want to use my monitor with VGA, because im sick of the game on a screen with HDMI TV and my monitor has only VGA port.

  In the BIOS when I go to advanced and then something inthegrated there are only options like something SATA, please what should I do? Is there a place to download acer integrated vga driver something os?

  Sorry for my English, it s not my mother tongue and I m only a teenager. Any help is apprecieted. And the monitor is Dell

  I do not think that your has G3610 of a VGA connection.

  on some pictures I found on the web, I saw 2 DVI port, you will need to find a converter DVI / VGA to connect your monitor.

  Are you sure that your monitor does not have a DVI port?

• How can I check on the deskjet 3050-3610 printer ink levels

  When I open the program can't get a Toolbox or information about the available options to do this. tried each option display

  Hello

  Could be missing something. Please visit the following link to download the full feature software and drivers for your computer and install it on your machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=4066452#n193

  You also need the utility too.

  I hope this helps.

• 3505 Deskjet series printer 3610. The system is Windows XP with all SPs

  By selecting "Print Page of Test" on the tab "General" of the field "Customize your printer" print the colours of the logo Microsoft OK; but all black text causes missing lines or sloppy.  Same result with a MAC running snow leopard OS.  All levels of print colors are quite adequate.  Any suggestions?

  Jason, thank you for your help and your time.  The problem is resolved.  The prompt for more information brought me back on the many steps and methods.  Main problem proved to be a misalignment of the cartridges.  Corrected by a number of iterations of the alignment process.  Return the printer to its owner in several weeks and hope it works satisfactorily with her pimp.  He is 89 and blind if, of course, he relies on his wife who is not too computer savvy.

• PXE HPDM 4.4.3610.13205 imaging problems

  I'm trying to shoot a picture of one of my thin client T5720. Unfortunately, the process starts.

  The workstation restarts and is going to boot through PXE. In the process of loading, I get the following errors:

  Spoiler (Highlight to read)

  Connect to the server failure: Connection Refused

  Cannot connect to DM server

  GetTask error: Send SSL request.

  Failed to retrieve information about the task

  /linuxrc: line 703: [: integer EXPECTED]

  Pushing the Image

  Use: up2url STRING

  Use: up2url STRING

  Could not connect to the file transfer server.

  Connect to the server failure: connection to connect to DM serverGetTask error RefusedUnable: request send SSL. Unable to retrieve the information of task/linuxrc: line 703: [: integer expression ImageUsage expectedPushing: up2url STRINGUsage: up2url STRINGFailed to connect to the file transfer server.]

  After that, the workstation restarts and try again to start the imaging process. It fails and so on.

  I checked the log files, but I have not found something strange.

  Where should I look to fix this?

  Problem solved!

  Option DHCP 201 was pointing to the port 69 but should point to port 40001. After this change, it worked.

• Error #3610: Offset 1 top of flow is off limits

  Hello

  I would like to know how I can fix this error coming from the:

  context.drawTriangles (buffer.elements);

  buffer. Elements is a flash.display3D.IndexBuffer3D

  Is there a database | List errors and clues on how to solve them?

  Thank you!

  I inject me more data than necessary in the buffer in the uploadFromVector().

• ZBook 15 G2: Earpiece/headset Bluetooth does not connect

  I have a bluetooth Sony MDR-10RBT headphones, who used to work with my laptop HP ZBook 15 G2. I don't know what happened, but it no longer works.

  Can I pair the headset, and it appears in the printers and devices window.

  However, when I double click on the headset icon and get the window where I can click on listen to music or VoIP calls forward to hands-free, they are both greyed out.

  If I look in the services:

  Bluetooth support Service: not started, automatic

  Bluetooth OBEX service: not started, automatic

  : Supported Bluetooth started, manual repair

  If I try to start Bluetooth Media Service, I get an error 1053.

  I updated the driver for Bluetooth Intel for the WLAN 7260/3610 (American International) to 17.1.1504.518 Rev.A
  June 29, 2015. I don't know what that replaces, because when I look in device, under the Intel Wireless Bluetooth 4.0 card Manager, it still says 17.0.1401.422.

  Any suggestions where to look next would be appreciated.

  stringy76,

  I found this remark about Intel. Apparently, there are two Microsoft Updates that break Bluetooth on Intel.

  https://communities.Intel.com/thread/104851

  If you follow these steps, you should be able to reinstall these updates and your headphones working again.

• Brick machine after BIOS update

  Here is a method that has worked for save a laptop HDX18 running an Insyde BIOS.

  Download the latest BIOS for this model.

  FTP://ftp.HP.com/pub/SoftPaq/sp51501-52000/sp51618.exe

  Save it on the desktop and use 7-Zip to "extract the files, when you open it you will find a file with the name of 3610F34.fd.

  Rename this file to 3610.BIN (I used the capitols)

  Enter a USB flash drive 2 GB or smaller and it must automatically be formatted in FAT32, when it's done copy and paste your BIOS file, newly appointed to the flash drive, safely eject the drive on your computer. (not just pull the USB port)

  On my HDX18 Bricked.

  Remove the battery and the adapter and hold down the button for 30 seconds to do a hard reset.

  Plug the flash drive into one of the ports USB left , hold the 'Windows' + 'B' key and hold your it plug the adapter.

  Start the laptop should begin to beep and read the flash drive, release the keys when and finished the laptop turns off. Let stand for 3 minutes and Windows.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------

  This method has done does not on my dv8, or done a job here for mrtranmsb:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/please-help-recovery-BIOS-HP-DV4-1326TX/...

  I had my dv8 two choices to replace the system board or replace the BIOS with a pre-programmed one chip.

  In my case, I was certain that it was a bad BIOS update because the machine was in perfect health before the flash.

  I decided to replace the chip, and 'My Tech' was most useful in the identification of the chip of the BIOS as well as Note Book Review. I bought the chip of 'My Tech'

  http://www.BIOS-Service-Center.com/product_info.php?cPath=385_411_517_849 & products_id = 18827

  http://Forum.NotebookReview.com/HP-Pavilion-notebooks/426674-HP-DV8-owners-lounge-568.html#post74959...

  Here is my thread as to where the BIOS chip is located on the dv8 (they're all the same)

  http://h30434.www3.HP.com/T5/notebook-hardware/DV8-1000cto-BIOS-chip-location/m-p/678195#M46432

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

  While all mean, this means that if your laptop is out of warranty , there not a lot of options to fix things.

  Most of the people do not have the skill that it takes to resolder a BIOS chip on the motherboard, and in this case, a replacement motherboard is the only alternative.

  OR

  If you have all your hard drive partitions in tact (the key is the HP tools partition), you may be able to save the BIOS of this partition by organizing the 'Windows' + 'B' key down to start. This works as with the factory original OS installation, you don't have not changed or added to partitions and if your machine is more recent then 2010.

  Before you try everything before, make sure that it is in fact a corrupted BIOS problem.

  Also note that this thread is only dealing with an Insyde BIOS, not Phoenix or any other.

  Hi again,

  Send me your email via PM.

• 2 different questions HPDM

  Question 1 - How can I know which SP, I am running?  If I'm using->, it says that I am running version 4.6.3610.19290.  Does this mean that it is SP3?

  Question 2 - in my HPDM, I have a tab for HP ThinPro3.  However, we withdrew all our equipment of ThinPro3.  I would like to delete this tab.  How do I do that?

  Thank you in advance for your help!

  (1) in the release notes for HP Device Manager, it lists the version information of the different components.  The notes are easily accessible on the HP FTP site:

  FTP://FTP.HP.com/pub/hpdm/documentation/releasenotes/

  FYI, looks like you are running the original installation of 4.6.

  2) there is a similar position earlier in the year.  Maybe it will help you.

  /T5/workstations-thin-clients/Device-Manager-4-6-SP4-how-can-I-remove-an-empty-quot/m-p/6708947/highlight/true#M19906

  I hope this helps.

• HP HDX 18 1080 - EL: expansion RAM on HP HDX 18 1080 - EL

  Hi all, I have a 6 years HP HDX 18 1080 - EL and I would upgrade from 4 to 8 GB RAM. What type/model 2 x 4 GB of ram should I buy for this pc? He accepts only right of DDR2?  How may improve overall performance apart to replace the HDD with SSD and increase the ram? Thank you very much in advance

  Here are the specs:

  Operating system
  8.1 pro 64-bit of Windows

  CENTRAL PROCESSING UNIT
  Intel Mobile Core 2 Duo T9400 2.53 GHz
  Penryn 45nm technology

  RAM
  4, 00GB DDR2 @ 398 MHz (6-6-6-18)

  MOTHERBOARD

  Quanta 3610 (CPU)

  CHART

  Monitor generic PnP (1920x1080@60Hz)

  MBNVIDIA 512 GeForce 9600M GT (HP) 49 ° c.

  STORAGE

  232 GB Seagate ST9250827AS (SATA) 40 ° C
  232 GB Seagate ST9250827AS (SATA) 32 ° C

  OPTICAL DRIVE

  Optiarc BD ROM BC - 5500S

  AUDIO

  IDT High Definition Audio CODEC

  Up to 8 GB of DDR2 - 800 (4 x 2 GB). It can actually take a Quad Core processor, but the best processor a QX9300 requires his own mother. On your motherboard, you can install a Q9100 or a T9600 for upgrades. Not sure, you won't get as much as your CPU is already very good.

  Yes, a SSD and 8 GB of RAM will be your best updated more effective and if you can be part of those of the SSD. As you can see here, 8 GB memory DDR2 is quite expensive:

  http://www.Amazon.com/memory-G71-340US-PC2-6400-black-diamond/DP/B009V1C4OY/ref=sr_1_8?ie=UTF8&QID=1425776344&SR=8-8&keywords=HP+4+GB+DDR2-800+so-DIMM

  Your repair manuals

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My PC quite often known error blue screen

  My PC shows blue screen error very often. At first, I thought heating has caused the problem, but it wasn't. The PC reboots when the blue screen appears. This problem started after upgrading my PC for Windows 8 pro. Previously, I used Windows 7 Professional that I have ever experienced such problems. I called MS on this problem, they said that updating the BIOS could solve the problem, but I didn't know how to upgrade the BIOS. Help me.

  Spec:

  HP Pavilion DV6 - 7040TX

  750 GB hard drive

  6 GB OF RAM

  2 GB Nvidia GEFORCE GT 630 M graphics card

  I7 3rd generation of processor 3610

  Thanks in advance,

  Maury

  Hello Mjdaran,

  I wouldn't update the BIOS I would continue to test because it works after the update of the graphics card.

  It maybe a problem with the fan on the graphics card that has been fixed with the update of the driver.

• Pav DV7 7015 ca: ram high grade

  DV7 / i7 @ 2.30 3610 quad Core / 8 GB ram / win 7 Home Premium (64-bit)
  
  I would add (double) the RAM in this machine, but have never had coverage of the and have no idea where the ram or how many sticks make up the 8 GB has currently. I need to speed things up upward with the upgrade of ram and an SSD for help with my RAW photo processing.
  
  (1) what type of ram, this machine uses?
  (2) can I just add more (another stick 8 GB) or can I replace the current with a 16 gb key?
  (3) what is the maximum amount of ram that this machine will use?
  
  I am a type of office and have no idea of what was going on inside your laptop. Thanks in advance.

  According to the official specs, you have 2 x 4 equals 8 GB.

  Plug

  Here is the Manual:

  Repair manuals

  See page 53. Memory is inside the large T shaped cover on the bottom of the laptop. It can take up to 16 GB of memory, modules of 2 x 8 gig of this stuff:

  Module memory 8 GB (PC3 12800, 1600 MHz) 670034-001

  http://www.Amazon.com/Kingston-PC3-12800-notebooks-KTH-X3C-8g/DP/B0089MTP0W/ref=sr_1_1?ie=UTF8&QID=1461606849&SR=8-1&keywords=670034-001

  Memory prices are falling again, so it is a good time to buy. I say most people forget the 8 GB to 16 GB upgrade computer since most users have no 16 GB of RAM but the treatment of RAW to .jpgs images or another format is an exception to this: you need all the memory and help you can get.

  An SSD is also a good idea. Your laptop can actually take 2 hard drives. I could write a book on options that gives you and how to on this subject, and I'll do it if post you back and ask questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.