GX620 Tower

Similar Questions

• OptiPlex GX620 Tower form HDD problem

  I'm working on an Optiplex GX620 Tower form that will be used in the office at our Church. The HARD drive has been fired from another computer that leave work. It's a Maxtor 80 GB SATA with Windows XP installed on drive. When I turn on the computer, this is the message that appears:

  

  When I try to start XP in one of the listed methods, it shows the screen to load for a few seconds. After that, she flashes a blue screen with error messages. It restarts showing the Dell splash screen and returns to the screen on the photo.

  If the HARD drive itself is damaged in any way? The extent of the material is in good working condition.

  cpugeek80

  I'm working on an Optiplex GX620 Tower form that will be used in the office at our Church. The HARD drive has been fired from another computer that leave work. It's a Maxtor 80 GB SATA with Windows XP installed on drive. When I turn on the computer, this is the message that appears:

  

  When I try to start XP in one of the listed methods, it shows the screen to load for a few seconds. After that, she flashes a blue screen with error messages. It restarts showing the Dell splash screen and returns to the screen on the photo.

  If the HARD drive itself is damaged in any way? The extent of the material is in good working condition.

   
  cpugeek80
   
  As the hard drive was another computer, the differences between the Optiplex GX620 and disc hard donor system [unless it's an another GX620], are too large and you may need to perform a clean reinstall of XP, then loading the OptiPlex GX620 drivers.
   
  Bev.

• alert! system battery is low problem for dell optiplex GX620 Tower

  alert! system battery is low problem for dell optiplex GX620 Tower, how do I fix or solve this problem, is this will solve by change coin cell? If yes than suggest me about the cell its name will be full description

  The battery is a battery CR2032 DL2032.  In the USA they are in grocery stores in the pharmacy section because the readers of blood sugar using the same battery.

  http://www.Walmart.com/c/KP/CR2032-batteries

  

  

• Need of GPU for Dell 4600 trying to video in Vegas Movie Studio HD Platinum

  My old Dell 4600 was great for surfing the internet, but will not make a video.  The pop-up indicates that no GPU is available.  Running Windows 7 Home Premium 32 - bit with 1.5 GB of RAM.  Is there a way relatively inexpensive to add a NVIDIA GPU (rendering accelerated by GPU STROKE requires a compatible NVIDIA driver 185.pour xx or later version with a GeForce GT 2xx series or the new GPU and CUDA GPU)? Information taken from the Sony site.

  No. 2XX series is PCI-E, which means a Dimension 8400 or later version.

  More old machine that I would recommend would be Optiplex GX620 tower with windows 7.

  Best machine would be Precision 380 with windows 7.

  

• recommendation for old Optiplex GX620 graphics card

  I upgraded my OS to Win 7 Pro 32 bit on this computer, but the Windows experience index is estimated at 2.8 with aero off because of the graphics.

  Processor: Mark 3.9, memory rating 4.5, Aero graphics performance: score of 2.6, games graphics: Mark 3.4, HDD: score 5.8

  It's a mini-tower Optiplex GX620 about 5 years, used for backup and email and the internet for other PCs:

  Pentium 4, E6850, 3.0, 4MB, Core Duo-Conroe, HDD 320 GB, 3 GB of memory, 375w power supply, graphics card, 128 MB ATI Radeon X 600, integrated sound.

  I would like a recommendation on a graphics card inexpensive that this machine can handle without more work of the CPU. I have searched the forum but could not find recent info.

  Thank you.

  will2010t

  SAPPHIRE HD 5450 1 GB would work in a dell optiplex GX 620? Slim. also is it just plug and play?

  I doubt it is plug-and-play; to illustrate, a parent replaced a burnt on 6450 with a 8400GS and Windows installed default VGA driver and he left like that. The screen showed a large black border, and the resolution is suboptimal. Installing software appropriate to NVidia eliminated border and full resolution.

  I would say that the card will work, but you will need to install the driver (which isn't hard).

  I have a Sapphire 6570 installed in my GX620, with excellent results.

• OptiPlex GX620 Pentium D on stock radiator?

  Hello, I got an optiplex gx620 mini tour a few months ago, and it has a pentium 4 3.4 ghz ht. I want to upgrade the pentium d processor and I have the radiator in alluminum. I heard that you can not upgrade to pentium d 960, but you can upgrade to pentium d 805.y question is, can I make this update and get safe temperatures, and if I can, what thermal paste should I use? BTW, sorry if I made any mistakes of grammar, I'm from Romania.

  No I'm not saying that units not 130W will work but the fan has run more than copper because it is not cooling as efficiently.  Aka 95W processors work but the fan works a lot.  Faster than the 915 will say no support of processor on USFF and SFF and office units.  The Tower has no such limitation based on 305 w power vs 150 to 220W power supply

  Pentium D 800 series this will show to upgrade Windows 10.

  Pentium D 900 series of 915 to 960 work very well with the 8.1 and 10.

  

• What is the best video card for a Dell Optiplex GX620.

  Hello!

  I have a Dell Optiplex GX620 and after many trials with glitches in video games, I am told that I need to update my video card. What is a good which corresponds to my mini-tower and a good price?

  Thanks for your help!

  Puppetguy

  You asked the best video card for the GX 620 minitower then this would be the HD 6670 or 7750 HD.   Apparently, you do not have any dedicated now video card.  If we have linked is too heavy, you will need to give us an idea what you can spend.  Your will does not get a lot for less than $50.  If all want them you want, you can get a HD 6450.  I got one on ebay for $32.

• Cannot add 4 GB of memory - optiplex gx620

  We have 2 optiplex gx620 computers. The two running a windows 7 pro. For some reason, I am only able to put in 3 GB of memory. When I try to add the 4 GB, computers starts and give a sound signal with the yellow light switch. This happens with both computers. The problem does not seem to come from the sticks of memory, since switching fingers does not cause a problem. It is only trying to go up to 4 GB, the problem occurs. All USB keys are of the same type - dell - low density - 1024 MB PC2 - 6400 DDR2 RAM

  Help appreciated.

  What form factor: desktop, Mini-Tower, small format, ultra compact?

  Is the power button constant yellow or blinking yellow?

  What color are the 4 diagnostic lights when it will not start? In the Manualerror codes.

  What version of BIOS?

  Were the 'new' modules purchased together with other modules (6), or recently purchased, but with the same characteristics?

  With all 4 modules installed, try to clear the BIOS:

  1. Restart, and then press F2 to open the BIOS Setup
  2. Copy down all the BIOS settings (or photograph all screens)
  3. Power off, unplug
  4. Power button press / hold for about 15 seconds
  5. Open the case and remove the motherboard battery
  6. Power button press / hold for about 30 seconds
  7. Make sure that all 4 modules are properly installed and locked latches
  8. Replace the motherboard battery
  9. Close the case and tries to start now
  10. Assuming it starts, go back into the BIOS Setup and make sure that the settings match what you have copied, or change to match. Be sure to save the changes to the output.

• I need two part number in 3020 OptiPlex Mini Tower

  

  The switch and the speaker can help me?  @SpeedStep

  The part number for the intrusion switch is on the white label, you can see on the photo.

  The part number for the company premises will be a white label on the side of the enclosure also.  Internal speaker Assembly 29MKK

  029MKK Optiplex 390 790 990 3010 internal 23mm speaker

  OptiPlex 390 3010 MT Mini-Tower switch button 74XPK

  Dell UC635 chassis switch

  Compatible models: 3010 OptiPlex, OptiPlex 740, desktop OptiPlex 740, OptiPlex 360 Minitour OptiPlex 740, OptiPlex 740 MLK, 740e OptiPlex, OptiPlex 745, OptiPlex 745 Desktop, OptiPlex 745c, 745th OptiPlex, OptiPlex 755, OptiPlex 990, OptiPlex GX520, OptiPlex GX620, OptiPlex XE, Precision T1600, Precision T1650, Precision T3600, Precision T5600, Precision T7500, Precision T7600, Precision T7600, T7600 WORKSTATION workstation

  

  

• Reference Dell GX620 Power Supply Question

  What's up guys, I'm new here, and earlier this month my school made me a job on time partial like the public library IT Assistant, because I took IT out classes at my high school. I'm 18, and I know a little about computers. My question is, one of our computers at the library, a GX620, the power supply of the machine went wrong and that we have at the back of the library are detached power supplies for GX520, I asked my professor of computer SCIENCE at the school if it would be prudent to go and try to install the GX520 power in the GX620, but I'm still not sure if it will be a sure idea It would cause a fire? He would burn something inside the PC? My COMPUTER teacher told me to check the amps and volts on feeding 620, and I checked, the GX620 power supply has a maximum of 275 WATTS, while feeding GX520 has a maximum of 220 WATTS, is completely switch the GX620 bad diet, with the GX520 spare?

  And you know that the PSU is bad, how... ?

  First, you will need to know if the spare GX520 PSU's for the same (Tower, Desktop, small, ultra compact) form factor as the GX620 before you can even think to use it because if the form factor of the PC is different, it cannot even between.

  There is a block of POWER W 220 here that says: it adapts GX520 both GX620 Desktop. But if you do not have a GX620 Desktop, this power supply may be a bit low power if the original was 275W.

  That said, you can get a power supply for the GX620 here for less than $30, depending on the form factor. If your existing GX620 power SUPPLY PSU 275W, it seems you might have a small GX620 form, based on the specs of the PSU indicated on this page.

  BTW: Please delete the telephone number of your post. This is a violation of the terms of the forum to use to post personal information, not to mention that it is never a good idea to post personal information in any open forum.

  EDIT: The forum dislikes the second hyper link is here:

  [16] http://www.discountelectronics.com/category?Product_Model=3&category=2&PRODUCT_TYPE = 16

• G4 tower: sell or recycle?

  I have a G4 tower Leopard running with 500 GB memory and 1 GB of RAM. recently wiped everything.

  anyone, anywhere even he wants? should I just send it to recycling?

  Unfortunately, they are not worth much, still it would be useful to someone, somewhere, problem is to find the... I'd like to see if there is a local Mac user group in your area.

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• Compatibility «?» (Mac Pro Tower / Firewire / climax together, etc..)

  I take Logic Pro 9, but after looking at all the improvements for Logic Pro X, I can't wait to get up to speed.

  I like the look of the improvements to the plug-in; logic adding distance (not available for LP9?); Drum Kit Designer, synthesizer, etc.

  When he (LP10) announced that there is a flagrant limitation I had with my current set-up but I don't remember what the hiccup was... perhaps there is none and I could be good-to-go.  Can anyone confirm if and where I'm looking at compatibility problems?

  System: Mac Pro Tower (mid-2010) 2.8 GHz Quad Core Intel Xenon

  OS: 10.10.5 (Yosemite)

  Interface: Climax together - Firewire

  If I remember, the question I met was first introduced with the announcement of Logic Pro X was he needed El Capitan - which did not offer the divers "Core Audio" / support, which means that overall height (Firewire) would be uncertain if even not work at all.  "" Looking at the "tech specs" on Logic Pro X, it supports OS X 10.10.  That looks promising (if it in fact the issue with El Capitan and the lack of support for Core Audio driver still exists).

  Can I run Logic Pro X to Yosemite?

  Can I run overall height (FireWire) in El Capitan without the Core Audio Driver issues / Firewire?

  Thanks in advance!

  I must add, additional hardware, I am running is a UAD PCI card in the tower.

• Is it possible to connect an external drive Thunderbolt 2 to a USB equipped MAC Tower?

  Is it possible to connect an external drive Thunderbolt 2 to a legacy equipped USB MAC Tower?

  No, currently the Thunderbolt must be integrated with the system board.