H P Pavillion S3320 video card compatibility

My PC is a month out of warranty and it breaks down. The fan on the graphics card has been designed to go out, and he did just that resulting in a frazzled video card. So now I'm on the epic mission to try to replace the card. I called the Center to appeal to 60 p a minute and they could not help or even suggest an alternative. The card that I am trying to replace is a PCI Express graphics card - 256 MB, ATI RV610LE, HD2400, low profile-(my computer is a slimline). The only card that I managed to find is ATI Radeon HD2400 Pro DVI video Cardinal Low-Profile, PCI-Express with 256 MB HD 2400 oem on amazon.co.uk. So my request is, the map I found on amazon will be compatible with my PC?

Any other suggestions or alternatives are welcome, because I really want to write off this PC immediately, although in the future, I will never by a minitour new system.

the amazon link is here:

http://www.Amazon.co.UK/Radeon-HD2400-low-profile-PCI-Express-2400/DP/B001PGUWYW/ref=sr_1_1?ie=UTF8&s=electronics&QID=1236956724&SR=1-1

Message edited by tristianapoppy on 03/13/2009 08:42

I think it would probably be a better idea, because the card will be just to keep more heat and burn! Thanks for your advice!

Tags: HP Desktops

Similar Questions

  • ASUS GTX 760 not in the Adobe - always full power video card compatibility list?

    Since my Asus GTX 760 isn't in the adobes video card compatibility list, I was wonder if I still get the full potential of it and the cards that are verified as the:

    • GeForce GTX 770
    • GeForce GTX 775M
    • GeForce GTX 780
    • GeForce GTX 780M
    • etc...

    Thanks for quick help.

    Yes the supported list is just what Adobe has tested at home. There is no restriction of performance based on the supported list.

    Eric

    ADK

  • Video card compatibility question

    I need to replace my video card ATI Radeon HD 4850 (GDDR3) for my HP Pavilion Elite.

    I have 2 questions:

    (1) a graphics card with GDDR5 memory would be compatible with my motherboard and a computer?  (my current graphics card is GDDR3)

    (2) PCI Express 3.0 would be compatible?  (my current graphics card is PCI Express 2)

    Thank you.

    Motherboard:

    Tip: PEGATRON CORPORATION TRUCKEE 1.04
    The bus clock: 133 megahertz
    BIOS: American Megatrends Inc. 5.22 10/12/2009

    System:

    HP-Pavilion, AW020AV - ABA e9280t

    Windows 7 pro 64-bit

    Processor:

    3.33 GHz Intel Core i7 975 processor
    cache of 64 kilobytes main memory
    cache 256 KB secondary memory
    memory tertiary cache 8192 KB
    64-bit ready
    Multi-core (4 total)
    Hyper-thread (8 total)

    12 GB of Ram (I think than DDR3)

    dim13 wrote:

    I need to replace my video card ATI Radeon HD 4850 (GDDR3) for my HP Pavilion Elite.

    I have 2 questions:

    (1) a graphics card with GDDR5 memory would be compatible with my motherboard and a computer?  (my current graphics card is GDDR3) Yes. The video memory is on the video card and is not a problem.

    (2) PCI Express 3.0 would be compatible?  (my current graphics card is PCI Express 2)

    It is also an answer yes because PCI Express 3.0 is a compatible specification down.

    Thank you.

    Motherboard:

    Tip: PEGATRON CORPORATION TRUCKEE 1.04
    The bus clock: 133 megahertz
    BIOS: American Megatrends Inc. 5.22 10/12/2009

    System:

    HP-Pavilion, AW020AV - ABA e9280t

    Windows 7 pro 64-bit

    Processor:

    3.33 GHz Intel Core i7 975 processor
    cache of 64 kilobytes main memory
    cache 256 KB secondary memory
    memory tertiary cache 8192 KB
    64-bit ready
    Multi-core (4 total)
    Hyper-thread (8 total)

    12 GB of Ram (I think than DDR3)

  • The video card compatibility

    Hello

    Anyone know if if would be ok or safe run a geforce 210 silent video card in my Pavilion s3300f long-term. Said power Board must be at least 300 watts but paviloins come with power 180. I use it for games just for the internet and streaming of youtube videos. It is currently installed and works very well but it causes excessive fatigue on my diet.

    Thank you

    In the long term it can filter the power supply and/or graphics card but the GeForce GT 210 has only a requirement of maximum power about 30 watts. That leaves about 115 watts for the rest of the components, with a little to spare. You will know when you have problems, as it is likely that the computer will start blue screen or stop completely.

    Please send BRAVO

  • How to remove the hp pavillion a1777c video card

    Hi, is there a guide somewhere on the way out of the video card?  Maybe, something like that? http://support.hp.com/us-en/document/c01039210 with pictures?

    because I need to take, but I'm not sure how! Thank you

    Here is a picture of another Committee with the removed video card.  The arrow is oriented to the tab and also shows the direction to push the tab to release the clip that holds the lock of PCI-e slot.  This tab is visible in the other picture posted for help earlier in the thread.

    BTW: Maybe the problem is the screw that holds the front of the card in the case.  Did you remove this screw?

  • xw6200 and video card compatibility

    Hi all

    I have a workstation xw6200. My old video card gets broken.

    I bought the GTS 450. VIDIA video card to replace it.

    I have Windows 7 installed, licensed and fully updated.

    I updated the BIOS to v2.10.

    I also installed a newer driver for this video card.

    As a last resort, I installed a new power supply for my system meets the current requirements for this card.

    Despite what above, there is no chance of having this card works very well.

    I can work for most of the time... but as soon as I leave a more demanding request of graphical subsystem, the system will start to blink... color artifacts appear... and sometimes, the system is able to set itself back the video core. Sometimes reboot.

    What is the problem?

    This card is compatible with this machine?

    In case Yes, what I should do to get the system stable and works very well?

    Thank you in advance for the help and support

    Concerning

    \Claudio

    Hello

    Claudio69 wrote:

    Hi all

    I have a workstation xw6200. My old video card gets broken.

    I bought the GTS 450. VIDIA video card to replace it.

    I have Windows 7 installed, licensed and fully updated.

    I updated the BIOS to v2.10.

    I also installed a newer driver for this video card.

    As a last resort, I installed a new power supply for my system meets the current requirements for this card.

    Despite what above, there is no chance of having this card works very well.

    I can work for most of the time... but as soon as I leave a more demanding request of graphical subsystem, the system will start to blink... color artifacts appear... and sometimes, the system is able to set itself back the video core. Sometimes reboot.

    What is the problem?

    This card is compatible with this machine?

    In case Yes, what I should do to get the system stable and works very well?

    Thank you in advance for the help and support

    Concerning

    \Claudio

    What brand of PSU to replace the original one with? For a station of high-end such as yours I would use nothing less than an OCZ, PC Power & cooling or Corsair power SUPPLY block.

    Have you tried to install just the WHQL driver for the card instead of the complete package?

    I would also consider RMA-ing on the map. There are many individual who had artifacts and the stability of the problems with this particular card. See the NVIDIA forums and search for your card and Windows 7 as keywords.

    Best regards
    ERICO

  • Video card compatibility.

    My nvidiageforce7350le which is a hp pavilion d4790y is KAPUT. This card plugs into a pci express slot. Oh, BTW I am running vista 32 bit. My question is, I could find an ATI radeon7000 for a GREAT price, but it plugs a regular pci slot. I was wondering if anyone knows if it is compatible with my rig and important the card slots? (I don't want the card for games).

    Thank you

    ZMan

    Processor:

    Memory cache L2 2 MB Core 2 Duo E6400 (C) DC (2.13 GHz/1066 MHz); Dual Core

    Memory >

    2 GB (2 x 1 GB) DDR2 PC2-5300 (2 DIMM)

    Hard drive:

    500 GB Personal Media (7200 RPM) SATA HARD disk (not installed)

    Secondary optical drive:

    DVD - ROM (16 X maximum speed) (SATA)
    2.4 X HD DVD-ROM
    Removable storage
    1.44 MB floppy drive
    80 GB Pocket Media drive
    120 GB Pocket Media Drive

    Network:

    Wireless 802.11 b/g

    TV:

    TV tuner with FM + ((comprend télécommande & récepteur) NTSC tuner card)

    Graphics card:

    GeForce 7350LE

    Sound:

    Sound Blaster X - Fi

    Keyboard and mouse:

    Keyboard wireless HP & HP premium wireless mouse

    Speakers:

    HP 2.0 (internal) satellite speakers

    As long as he is still on the PCI slot open, it should work.  Just FYI, PCI video cards will not and can not give similar performance as a PCIExpress card.  Also FYI, this card isn't much of a video card.  If it was me I would spend on this card, there is a reason for "GRAND Prize" - no one will want to buy it.  A PCIExpress card that will work better can be bought for less than US $50.00 just for example http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007709%204025&IsNodeId=1&name=%2425%20-%20%2450

    There are more than 100 cards under $ 50.  Each of them much better than an ATI radeon7000.

    BTW: the card that pjtikkanen refers to the map, I also use.  His post fight so I was reaseaching your question.

  • problem upgrading video cards H8-1234

    I just bought a new Radeon R9 270 for my HP H8-1234 (I also got a 600w PSU to run it).

    When I tried to install all this that I had was a screen empty. I reinstalled the original video card and it worked fine.

    I've seen a few similar posts on these cards, but not all solutions are here. What do you guys recommend? Should I just found another type of card? Is there another which offers similar performance that will work with this system?

    Hello

    I looked at some video card PowerColor HD7870 and they were ready UEFI.  Your PC is not loan UEFI.

    The UEFI Sapphire documentation clarifiies video card compatibility. Consider the following text:

    «The SAPPHIRE HD...» UEFI edition/UEFI loans products are compatible with motherboards that are consistent with the specification UEFI 2.3.1 or later. It is also compatible with motherboards that did not feature UEFI. Motherboards containing an earlier version of UEFI must be updated to the latest version or have the off option to UEFI, otherwise, the graphics card will start in legacy mode, or in some cases no start at all. Please refer to your manual for the motherboard for the BIOS update instruction".

    Looking for a ready video card no UEFI.

  • 32-bit video card driver sony vaio vgn-fj270 device

    My laptop came originally with Windows XP, but I have upgrated with Window 7, having a problem with the video card compatibility which can do to solve this problem.

    Hi Felix,.

    I have according to the manufacturing site there is no driver Windows 7, the driver that is available only for windows Xp and windows vista Home basic.

    http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=VGNFJ270B&SelectOS=27

    Try to download and install windows vista home basic driver in compatibility mode

    If the issue still prissiest, then you may need to communicate with the computer manufacturing

  • Vista screensaver stopped working because it requires a newer video card or Direct 3D compatibility

    Windows Vista Professional Home: The resolution changed by itself, when I restored it to the original setting, the screen saver stopped working because it requires a newer video card or compatibility with Direct 3D. Nothing has changed on my system over the past two years, and everything worked well. That's happened? Why I get this message? Thanks LS

    Thanks for the reply.

    Based on your response, it seems that the display driver has been corrupted by a reason, then I suggest you to install the latest display driver. Even if you do not use Direct 3D I recommended to leave the computer updated with the latest drivers that are released by the manufacturer of the computer so that it can run Windows features correctly.

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 Compatibility Center video cards

    The Windows Compatibility Center contains 40 video cards are compatible. Is this all? I need an AGP8x card or I guess I could run just old XP easy to use and reliable. 7 doesn't impress me a lot.

    The Windows Compatibility Center contains 40 video cards are compatible. Is this all? I need an AGP8x card or I guess I could run just old XP easy to use and reliable. 7 doesn't impress me a lot.

    The ONLY way (even with the Compatibility Center) to make sure a video card is actually compatible and supported by its manufacturer is to check with the video card manufacturer themselves.

  • Compatibility with video cards CC 2015

    PNY XLR8 GeForce® GTX 980 with 4 GB of GDDR5 memory for compatibility with CC 2015 what?  I don't see it in the list of video cards.

    Any card with a device compatible-current of the vendor driver should work just fine

    Are you talking about a specific program, such as Premiere Pro?

    creation http://blogs.adobe.com/premiereprotraining/2011/02/CUDA-Mercury-playback-Engine-and-Adobe--pro.html

  • GTX560Ti for PE 11,12,13 nvidia video card drivers compatibility

    I struggled to get my PE10 to work properly. When I load the camcorder. MTS files into a new project for editing, the first image displays OK but then freezes, i.e. will not play video. Various forums point to the driver NVidia with PE10 incompatibility and claim that the versions of the old drivers (e.g.320.xx) may work. I tried to install these drivers but without success. My question is: if I upgrade to a later version of the EP, I'm likely to have the same problem? That is to say, is the incompatibility of the PE10 and NVidia drivers a known issue that has been resolved in later versions of PE?

    Help appreciated.

    PC hardware:

    Video card: NVidia GTX-560Ti with 1 GB of RAM.

    PC: i7 processor - 3770K with 8 GB of RAM.

    Operating system: Windows 7.

    Major Sparky

    The display problem known with Premiere Elements 10/NVIDIA GeForce which requires the rear roller of the version of the driver to may 2013 all about not report with another version of Premiere Elements, move forward. If you want that links to the volumes of information on this issue, I'll post them for you. As you work with Windows 7 64-bit, you are likely to find earlier versions of the NVIDIA GeForce driver. Windows 8 or 64bits 8.1 users who want to use this hotfix roll back running into the question that goes from NVIDIA do not offer enough old driver for Windows 8 or 8.1 versions 64 bit for this fix.

    NVIDIA Driver Downloads - advanced search

    Even with your NVIDIA card, it is questionable if July 1, 2013 320.49 driver would work for you, I'm not sure if it's old enough to

    meet the driver version roll necessary return (around may 2013). If you have tried, so that isn't going to be the way out of your current situation.

    If you move to version 11, 12 or 13 with the files from your camera, please watch the Premiere Elements tryout before purchase to ensure the

    the version compatibility with your project objectives and of the computing environment.

    Special attention to the test...

    Your camera offers two possibilities of recording AVCHD and MP4. The two are reported by camera manufacturers to use AVCHD (MPEG4 AVC/h.264)

    video compression. Therefore, I would look at the relative performance of the AVCHD.mts and the AVCHD.mp4 that happens to your Timeline.

    Recent discussions here (even with the current version 13/13.1) seem to point to issues of stability less first elements editor and organizer of the elements with AVCHD.mp4 with AVCHD.mts.

    Please update us on your progress when your schedule allows.

    Thank you.

    RTA

  • Qosmio G10 - compatibility with video cards with VISTA BUSINESS

    THE VIDEO CARD IS NOT COMPATIBLE UND UPDATE THE MICROSFT HOME PAGE IS ALSO NOT OK
    PLEASE SEND ME AN UPDATE FOR TH QOSMIO G10 GRAFIK

    Hello Michael

    Qosmio G10 Vista capable laptop is? There the Vista capable label?

    http://support.toshiba-tro.de/KB0/TSB7101O80001R01.htm

  • Video graphic card compatibility

    can someone help me and tell me who the next card compatible with my PC graphics. I am not interested in game want to just replace my existing graphics card since its fan is very noisy!

    Details of my PC:

    PC: Units HP Pavilion media center m8175a

    Motherboard: P5LP - THE

    Max power: 300W

    RAM: 3 GB

    Existing card: GEForce 7500LE

    Graphics cards:

    1) Zotac GT210 512 MB DDR2 DVI - I HDMI HDCP LP ($34.00)

    2) Zotac GT210 1 GB DDR2 DVI-I HDMI HDCP LP synergy Ed($39.00)

    3) eVGA GT210 1 G DDR3 LP DVI HDMI radiator PCIE ($35.00)

    4) eVGA GT240 1 GB DDR3 DVI HDMI VGA ($89.00)

    Thank you for your help.


    If you do not already ordered or purchased this card, you can watch this EVGA 01 G-P3-1313-KR GeForce 210 1 GB DDR3 video card. He must break into your computer without any problem.

    Frank

Maybe you are looking for

  • Why is it harder to make a right-click on my magic mouse?

    Here is the situation. I have a magic mouse (and a wireless keyboard). Death of my MacBook Pro, if my company try it swapped for a new (but with less RAM). Before the Exchange, it was easy to make with my magic mouse right click. I would click on the

  • Volume on my Aspire M3970 on HDMI AMD desktop computer is too low.

    Volume is now too low to be usable. I checked the connection etc. The parameters are all up. Summer in properties etc, no problem seen here. It is a recent issue as his has been authorized. The monitor is Acer V273HL. Keyboard is Acer SK9660 [maximiz

  • Impossible to determine the returned PID of launch when running on the device IDE 10.2 2.0

    It started just happening whenever I have try and run / debug for my device running 10.2. Tried the obvious restart / reboot... updated to 10.2... Update IDE to 2.0... Still nothing... No logs, error codes, nothing, just that the error! Lost a day to

  • BlackBerry Smartphones updated BB App world... and lost all the apps?

    I had to make an exchange of phones last week.  Did this and reinstalled several applications on the new phone. Finally I was told had to do an update of the BB App world... Done this, and they are all gone now.  They are not under the uninstalled or

  • My software works like

    Hello I would like to help a pitcher know how to start my steam and also the pitcher in the League of legends car when I run the launcher the app starts 1 second disappears automatically helped me get it you please :(