Windows 7 Compatibility Center video cards

The Windows Compatibility Center contains 40 video cards are compatible. Is this all? I need an AGP8x card or I guess I could run just old XP easy to use and reliable. 7 doesn't impress me a lot.

The Windows Compatibility Center contains 40 video cards are compatible. Is this all? I need an AGP8x card or I guess I could run just old XP easy to use and reliable. 7 doesn't impress me a lot.

The ONLY way (even with the Compatibility Center) to make sure a video card is actually compatible and supported by its manufacturer is to check with the video card manufacturer themselves.

Tags: Windows

Similar Questions

  • Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center.

    I won't be here but Microsoft seems very happy sending me on the prosecution of the wild goose, and here I landed! I didn't even know that Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center. The first, in the Windows help sent me to http://windows.microsoft.com/en-us/windows/support#1TC=windows-7. Not a mention of the word "compatibility" on the page anywhere. Then, enter 'compatibility' in the search for support and here is the result, looks promising. https://www.microsoft.com/en-us/search/result.aspx?q=compatibility. But no, I click on the first result that says Microsoft compatibility Center. Even what seems to be the correct web address, microsoft.com /compatibility and it takes me here http://www.microsoft.com/microsoft-band/en-us/support/hardware/microsoft-band-system-requirements. I give up!

    Hi André,.

    Please keep us updated.

    Unfortunately, the center of compatibility Windows has actually retired. To find out if any program that works with Windows 10 or not, you can check with the developer to program on the compatibility of its operating system. In addition, when you migrate to Windows 10 from a previous version of Windows, you are informed about programs that may not work with Windows 10. However, you can try to install these programs in compatibility mode and check.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Windows 7 Compatibility Center

    Andrew Sykes asked about

    I won't be here but Microsoft seems very happy sending me on the prosecution of the wild goose, and here I landed! I didn't even know that Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center. The first, in the Windows help sent me to http://windows.microsoft.com/en-us/windows/support#1TC=windows-7. Not a mention of the word "compatibility" on the page anywhere. Then, enter 'compatibility' in the search for support and here is the result, looks promising. https://www.microsoft.com/en-us/search/result.aspx?q=compatibility. But no, I click on the first result that says Microsoft compatibility Center. Even what seems to be the correct web address, microsoft.com /compatibility and it takes me here http://www.microsoft.com/microsoft-band/en-us/support/hardware/microsoft-band-system-requirements. I give up!

    I know the feeling.

    Microsoft are terrible to change sites around and moving links, it seems to happen a lot.

    Maybe the W7 Compatibility Center has closed now? but this link seems to give some hope - http://windows.microsoft.com/en-us/windows7/help/compatibility#T1=softwarecompat to what you click on the 'Windows 7 ' compatibility Center link, which of course is not going to go.

    As I say, maybe his cock now. I hope that someone will know the answer for you, because I thought that it was useful to have around. (I know they have closed the Vista one )

  • Windows 8 Media Center video & music files on my laptop has been corrupt.

    Windows 8 Media Center video & music on my laptop has been corrupted. Play the video but without any noise.

    All the audio controls are set to maximum volume I discover on the sound settings of Realtek video & its drive of the laptop. The following message shows on the properties of Audio Realtek High definition that thedevice working properly«»

    Please someone help to specific steps to follow to fix my media library without spending money.

    I am a retiree and would really appreciate help online to fix my media library.

    Thanks for the help, Chris

    Hello

    Thanks for posting your query to the Microsoft forum.

    I appreciate your efforts to try to solve the problem and I will definitely help you with this.

    You have sounds in Windows?

    I understand that you have tried all the troubleshooting steps, to repair Windows Media player, you can follow the methods below:

    Method 1: Run Windows media player convenience store settings and check.

    a. press the windows key + W and type Troubleshooting.

    b. Select Troubleshooting.

    c. Select display all on the upper left corner.

    d. run Windows media player settings troubleshooter.

    Method 2: Uninstall and reinstall Windows media player.

    I suggest trying the deactivation and activation windows media player by following the steps below and check if it solves the problem.

    1. press Windows key + R to open the run command.

    2 type appwiz.cpl , and then press enter to open programs and features.

    3. click on "turn on or off windows features".

    4. uncheck the 'multimedia' and click ok.
    5. restart the computer when you are prompted.

    6. repeat step 1-3 and check the "multimedia functions".

    7. click on Ok.

    I suggest also refer to the link below for more information on the types of media files that supports Windows Media Player.

    Types of files supported by Windows Media Player

    If you do not have Windows sound, please visit the link below:

    Method 3: Follow the steps in the link given below

    No sound in Windows

    Let us know the results. Thanks for posting for further assistance, we'll be happy to help you.

    _______________

    Thank you best regards &,.

    Isha Soni

  • Download Windows 10 - app old video card (GWX) - reports after installation of another.

    I just installed an ATI Radeon HD3850 graphics card in a computer, I am running Windows 7.  The other graphics card is a Nvidia GeForce 6600GT.  The app for Windows 10 (GWX) always reports the Nvidia card is still in the computer, but it is NOT.  How can I get the application of 10 Windows to recognize that the Nvidia card is no longer installed.  Reason for the change is that the App GWX said Nvidia card is not compatible.  I want to know what that reports of GWX App on the ATI card.  I tried to manually run the evaluator of compatibility without success, the GWX always reports that the Nvidia card is still there.  ATI drivers and software have been installed and the drivers and the software Nvidia have been uninstalled.

    I installed Windows 10 T.P. (new installation) on a different HARD disk when this version was released and the o/s installed with all the problems.  Last night, I installed the ATI card and Device Manager shows ATI Radeon HD3850 for the current video card and not the base Microsoft graphics driver that was used for the card Nvidia GeForce 6600.  It seems that the ATI card is compatible with Windows 10 because it shows in Device Manager in Windows 10

    Edited the post to separate and clarify the separate two thoughts and change some computer terms.  06 14, 2016-2:53 PM EDT

    He is not a Board that's graphic card

    But yes gwx does not update changes.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-win_upgrade/how-can-i-run-the-Windows-10-compatibility-test/1414c2f5-4b5e-404c-9ABF-12f69d96eae3?page=1

  • Need satellite 4090XCDT - for Windows XP Home edition video card driver

    Hi all

    My apologies if I posted in the wrong section
    I have recently acquired a 4090xcdt and that you have installed Windows XP on it.
    The main problem is that I can not find a suitable driver for the video card. Everything what I can't find is rather varied a lot of win 95/98er. The adapter is a trident cyber 9525dvd any help would be appreciated...
    The group is concerned... Scott
    After searching on the net for the last four hours.

    Hello

    I tried a lot of time in the internet for XP drivers, but without success.
    It seems that graphics drivers XP trident do not exist.

    Unfortunately, in my view, must use the standard XP graphics driver, if you want to use XP on this unit ;(

  • Media Center Video card not detected error

    Media Library on my s3580a Slimline has suddenly stopped working.  Error bed undetected graphics card.  I followed the instructions to fix on the HP page. Hardware diagnostics shows no problem with the card.  Changed service Media Center receive and rebooted as suggested.  Have removed and reinstalled the PCI card. Used Recovery Manager to recover an hour before the error. PC was not connected to the network, so no update driver has occurred.  Searched drivers updated in any case but none are available and existing HP driver refused to load because it is the same version.  Can someone please?

    Crow, here's the latest nvidia driver for your video card.  Once you install it, let us know if it works.  If this isn't the case, we will return to the drawing board until what we solve your problem.

  • User does not appear in the XP start window after installing new video card and the extra memory. This option is to turn off count... safe mode does not help.

    Additional memory added, installed the new video card...
    Reboot a windows XP user name screen. any user identified.

    Can you achieve Alt + Ctrl + delete twice and connect with the classic login?

    -JW
  • How to upgrade Windows XP to the video card of 2010

    I am told that I need the latest version of the drivers for video card 2010 game Gamehouse. How can I do this

    First you must determine which video card you have.

    If you have a computer 'brand', especially a laptop, it is best to get the drivers from the web site of the manufacturer of the computer.  Depending on the brand, you may need to enter a 'serial number (Dell) or type/model designation (Lenovo) and you should be able to get the video driver for your specific computer.

    If not, start the Device Manager (start > run > devmgmt.msc > OK) and click on the + sign to the left "display cards.  That should tell you the make and model of your video card.  You can then go to the web site of the manufacturer of the video card and download the current driver.  DO NOT select "Update driver" in Device Manager.  This will cause usually your download one driver Windows Update, which generally is NOT the current driver.

    There should be guidance on any web site, you get the driver from on how to install it.

  • Compatibility with video cards CC 2015

    PNY XLR8 GeForce® GTX 980 with 4 GB of GDDR5 memory for compatibility with CC 2015 what?  I don't see it in the list of video cards.

    Any card with a device compatible-current of the vendor driver should work just fine

    Are you talking about a specific program, such as Premiere Pro?

    creation http://blogs.adobe.com/premiereprotraining/2011/02/CUDA-Mercury-playback-Engine-and-Adobe--pro.html

  • Qosmio G10 - compatibility with video cards with VISTA BUSINESS

    THE VIDEO CARD IS NOT COMPATIBLE UND UPDATE THE MICROSFT HOME PAGE IS ALSO NOT OK
    PLEASE SEND ME AN UPDATE FOR TH QOSMIO G10 GRAFIK

    Hello Michael

    Qosmio G10 Vista capable laptop is? There the Vista capable label?

    http://support.toshiba-tro.de/KB0/TSB7101O80001R01.htm

  • Compatibility with video cards

    Hello

    I am trying to add a new MSI video card to my Envy H8-1414 office. It's the map:

    http://us.msi.com/product/VGA/N660_Gaming_2GD5OC.html#overview

    When I add the map with the OEM PSU, I get 6 long beeps. I added a block of POWER W 550 and the beeps go, but I have no video. I contacted MSI and they say that power is sufficient, but I need to check with HP to ensure that the BIOS can support the map. I checked the HP support site and I see no BIOS updates for this machine.

    The card is PCI Express x 16 3.0 and 2.0 just says HP motherboard so I wonder if it is simply not compatible.

    Any ideas?

    Thank you.

    Temoporarily remove the new video card. Connect your display to the video embedded right on the port at the back of the PC.

    Enter the BIOS and go to the Security tab click on secure boot configuration.

    The next screen will resemble the following image. Press the F10 key to commit the change

    Verify that secure boot is set to disable. Press the F10 key. Exit the BIOS. Shut down the PC and install the new video card. Plug the connector of display on the appropriate video output port. Turn on your PC

  • need help to understand the compatibility with video cards

    I recently bought a HP Pavilion a6742p Desktop PC I have no idea what graphics cards, it supports (trying to upgrade). Check the manufacturers page, but I couldn't understand anything either here is the link

    http://h10025.www1.HP.com/ewfrf/wc/product?LC=en&DLC=en&CC=HK&lang=en&product=3875703

    insaneaim wrote:

    THX but which manufacturers video card companies take in charge of hp?

    HERE, none of them.  I recommend the following manufacturers, XFX, BFG, EVGA, Sapphire & PNY, in that order.  These recommendations are based on personal knowledge, as well as several years of hanging around in the forums of enthusiasts.

  • HP Pavilion Elite e9120y desktop PC and compatibility with video cards

    Hello

    I hope someone can help me: I tried to find the answer to this question, but can't seem to nail a definitive answer.

    I need to update my video card as soon as possible and I need to know if the mother of desktop PC HP Pavilion Elite e9120y (plug herehttp://support.hp.com/us-en/document/c0174290) supports a Sapphire 1 GB Radeon HD 5670 video card

    I know I have to upgrade my power supply at least 400W

    I'd appreciate any help

    Thank you

    This widget could not be displayed.
  • Compatibility with video cards with an old PC

    Hello, just a quick question. I looked through my old Compaq CQ5110F PC Windows Vista for a while now and I have a few quiestions.

    1.) can I put food to maybe a range of 600 Watt? If so, can I have a link to a good quality diet?

    2.) I also looked in a new graphics card. I was wondering if this graphics card would be repair / and or be compatible with this PC? http://www.Amazon.com/XFX-DisplayPort-PCI-Express-FX775AZNP4-FX-775A-ZNP4/DP/B007Z3T5JC

    (3.) I have a new Windows 8 with a 1 TB hard drive, maybe I can do that one replace the 320 gb hard drive in it?

    Now I know that Compaq is not in the ideal age, I mean its a 09 model, so if I can't put the graphics card, I had in mind, I would like to do the best I can, if you get where im at right now.

    Thanks, and I appreciate any info anyone can provide!

    "Tomorrow could be a day too late" - skillet

    Hi HammerKnee,

    Your motherboard has the nforce 430 chipset, The latest drivers released is for windows Vista, But as i found Windows 8 should have the correct drivers compatibility preinstalled and support your motherboard chipest, so there should be no problem install it on your computer, you can find the information on the next link: http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Hardware&Name=NVIDIA+GeForce+6150se+nForce+430+Motherboard&ModelOrVersion=&Vendor=NVIDIA&Locale=&LastSearchTerm=&BreadcrumbPath=&TempOsid=Windows+8

    On the RAM, the motherboard has 2 slots for RAM and DDR2 support on these speeds:

    • PC2-5300 (667 MHz)

Maybe you are looking for