H5V62EA #ABZ, portable Italian with U.S. power.

Similar Questions

• Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

  Original title: black screen?

  My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

  Hi Miguel C.
   
  a. What is the brand of your computer?
   
  b. do you remember of any changes to your machine before the question?
   
  I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
   
  J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
   
  Note: Do not move this jumper with the computer turned on.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• About three weeks ago, I bought a new MacBook Pro, disabled Adobe CS 6 on my old MacBook and re-intalled on my new computer portable DVD with success. I used all my Adobe fine until today. Two days ago, I've updated all my creative suite after receivi

  About three weeks ago, I bought a new MacBook Pro, disabled Adobe CS 6 on my old MacBook and re-intalled on my new computer portable DVD with success. I used all my Adobe fine until today. Two days ago, I've updated all my creative suite after having received an automatic notification. Photoshop will not launch now (everything else is OK). When the Photoshop window it immediately crashes with the message "adding extensions...."  Quick basic routines' but nothing happens and I have to "force stop" window. Advice please?

  reset your preferences: https://forums.adobe.com/thread/375776

  In addition, if you inadvertently "improved" cs6 in the cc version, you use a trial (unless you have purchased a subscription) which will expire in 30 days.

• With Satellite A30 power problems

  Hello

  Over the last four years, I have been using a Satellite A30 with XP Pro... had no problems whats so ever until that last months... I started to notice the battery life becomes lower before (prob because of the decrease in battery life) but also when he is on the grid it will charge the battery to 100% but instead of power are removed from the sector It starts to drain the battery even when the sector is connected.

  Another problem is that I have to keep or stop the laptop goes into hibernation mode so it can recognize it is powered from the battery to load... even in this case, it may take several attempts for the laptop to begin to charge the battery...

  These problems started start after warranty, and was released in additional insurance coverage

  Any information or help gladly appreciate it that I fight to get assignments done University

  Thank you

  Ben

  Hi mate,

  had a similar problem with an other friend A30. After sending the machine to an ASP (certified partner), they told us that the internal charger was defective and they have offered to swap the motherboard.
  But given that the motherboard was really expensive for him he sold the machine on Ebay and bought and Satellite A200 which is a machine really well.

  I guess that the motherboard is gone...

  That's all

  See you soon

• With SM30X-102 power management

  Hello

  I want to use the utility of Toshiba power with a non admin on laptop user account management. If I try, I get the message that I have to be an administrator. If I make a selection as long as an administrator, the values are not used for the normal user account. So my laptop doesn't work at full speed if I am not an administrator. No idea if there is a setting in XP where can I change the power as a non admin user management?

  thanx
  Peter

  Hello

  one of my friends had the same problem, so we looked for a resolution and found an announcement in this forum.

  Go to the "advanced search" and search for "Toshiba power saver on M30 SP.

  Perhaps it could help you!

  Antoni Bye

• Owner of portable dissatisfied with after-sales support

  Toshiba's customers victims of its success? Generally reliable products with the result a poor after-sales support?

  I've been using laptops for business and pleasure for several years without fail and as the owner happy with Toshiba televisions and other electronics, has decided to buy one of their laptops.

  I paid in full for a new L series and after 6 months of normal use, it stopped charging. Felt as if the PIN in the machine that plugs into the charger was loose.

  I contacted the supplier and they agreed he would need repair and after apologize for my inconvenience, were happy to make it happen but is outside, she would probably be repaired faster if I contacted Toshiba and has asked to make repairs.

  So I did. And he's just down the hill from there. First mistake was mine, not record does not guarantee. So I tried to do. But I bought it online and as my machine six months old was apparently made 11 months and 28 days ago, I had to provide proof of purchase. Offering to send a copy of my bank statement indicating the date of purchase, price and provider was not satisfactory.

  This meant contacts the supplier in London during office hours, the same that I work and so not easy to do. They sent me a copy of this and I then spent two nights in train to pass it to Toshiba for verification.

  What I finally did and the next day for another hour of dinner, rang to arrange collection. I was put to a repair tech who said yes, we can fix this but his manager he said, that he would not be a warranty repair, regardless of the fact that it was only six months. I rang the Bell, not happy.

  The next day I rang back, talked to someone else and was able to arrange for the collection, having been said that according to them, it was my fault it didn't work I have to pay for repairs and the cost of return of close to £80. These threats and that is how to display the, have had no matter my statement that it has been used normally as all the other ones I had used for years and was less than 6 months old.

  The following Monday, it was collected not as agreed. He was captured Tuesday and not packed by the company as I said, I did the pilot did not know how to work the box. No more than I have, but I did. And, following the instructions, I do not understand the charger.

  It was returned, without notice, at the beginning of the third week, on four because it has stopped working. By way of explanation, a note of two lines was behind the address says label DC lead to changed, battery tested.

  Happy just to take back, I took it home, plugged in and it does not work. Looks like the charger is defective and the pin code. I am so not looking forward to tring to get this sorted bit.

  Sorry it's so long, but this is my experience of Toshiba service after sale. I can't help but wonder if I'm the only one disappointed, disallusioned and angry customer out there and I'm curious to hear of treatment, others lived.

  Hello

  In a first time sorry to hear you have this negative experience, but in such a situation, you have to be a little more realistic. It is well known that cell phones or any other manufacturer of different products manufacturers recommend product registration and this should be done quickly enough and not 6 months later. Last month, I bought expensive vacuum cleaner with 5-year warranty and I registered immediately. Now if something goes wrong, I can be sure it will be repaired free of charge.
  Anyway, it's nice to hear that you have made a big mistake.

  I use two laptops Toshiba and I recorded two of them after the first start immediately when this option is available before operating system began for the first time.
  Unfortunately, I can't help you with your case but I just want to write about my experiences.
  After a month of use of motherboard on my Satellite A300 is dead. I wanted to just connect the external HARD disk but some electric shock destroys any electronic power and my external HARD drive was dead, too.

  I contacted Toshiba service in my country and the next day I was in the store. I didn't want to be arrogant or make a sort of pressure and comes nicely asked if this can be fixed as soon as possible.
  You don't know me 7 days later I got my laptop back with the new motherboard.

  I was so happy, so I paid the coffee for two technicians who have achieved all this.

  Once more I'm sorry to hear you had bad luck with this, but I think it's only not to give general statements on the service worldwide. Maybe the guys in my country are more motivated to do a good job. ;)

• Upgrade to OS El Capitan. Has been Keychain errors. Now incompatible with the very power not past the login screen. Try Apple cat and give up after spending more than 30 minutes, avoiding so to repeat myself (last I checked, I'm not a fool).

  Upgrade to OS El Capitan this morning on the laptop of my daughter because she saved his laptop school (apple) at what his cell phone the school had problems. Had to upgrade to the latest OS as its portable school was on the latest OS and its docs to school would not open on his personal laptop (she was on the Mavericks). Fallen on admin password so questions concerning with the cat and who sets obtained but by fixing what they then created many problems of Keychain. I was directed to a support document, which did nothing. I was told to finish the upgrade to El Capitan, and maybe that would fix issues Keychain - BAD! Now, it's a 50-50 chance that when I get to the sign in page - I'll either get arrested here with the keychain error pop ups or it will allow me to the desktop view. I'm beyond disgusted at this stage because what should have been simple has become a living nightmare.

  I checked through the archives and found a lot of Keychain, but nothing seems to fix mine.

  I get the following:

  * talagent wants to use Keychain 'local products '.

  my admin and my signon password do not work

  so I press Cancel, then I get

  * Messages Agent wants to use Keychain 'local products '.

  my admin password and access code does not work

  so I press Cancel, then I get

  * CommCenter wants to use Keychain 'local products '.

  my admin password and access code does not work

  If I press Cancel, then comes continuous pop-up error message Agent

  Help, please

  Have you tried to reset the keychain:

  Reset your Mac OS X Keychain - Apple support

  See you soon,.

  GB

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.

• Satellite C660D - 10 d - WLan not working only not with the battery power

  Hello

  for a few months, I bought the Toshiba Satellite C660D - 10 d...
  but when I try too connect to wireless internet, I discovered that I could not connect unless I charge the battery at the same time with.

  I'd appreciate help.

  Thank you.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

  Change the setting of the Wlan power management and Wlan driver update has solved this problem

• 15 K1Y78EA #ABZ ENVI: problem with my wifi Broadcom BCM43142 802.11 Wi - Fi adapter on windows 10 bgn

  Hello
  
  I have a problem with my Broadcom BCM43142 802.11 bgn adapter Wi - Fi because I upgraded my windows 8 to 10

  wifi works fine but then after a while a get on the wifi icon's yellow warning triangle, no internet, reviews
  I have to disable and then enable the adapter to operate again, the same problem, but after a while again accurs

  card driver is updated to the latest version 7.35.275.2, the driver date 02/07/2015 via the HP support assistant

  It says no new updates

  Help, please
  
  Thank you

  Hi @HadjadjTaha,

  Thank you for your inquiry.

  I understand that since the upgrade of Windows 8 for Windows 10 your Wi - Fi works fine, but after awhile the icon won't say no Internet and you will need to disable and re-enable the adapter to regain access to the Internet.

  Would check you this setting.

  • Go to the Device Manager
  • Click the network card to expand the list
  • Right-click on the adapter that is listed and choose Properties
  • Click the power management tab
  • If "allow the computer to turn off this device to save power" is ticked, please remove it.
  • Click OK
  • Repeat the process above listed all types of adapters.

  Here is a link to PC HP - troubleshooting wireless network and Internet (10 windows) that can also help.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!

• Pavilion NC768AA #ABA: HP Pavilion model. a6719f new video card with the new power supply?

  Hello!

  So, I won money to buy (hopefully) a new video card!

  However, I have a problem.

  I don't know which one to get!

  SO, someone please, please recommend a video card for intermediate level games.

  (My budget is less than $280)

  My PC has stock everything.

  Thus, it was purchased as it was when you would get everything first he.

  Yes, I need also a new power supply that is included with my budget.

  Thank you!

  Revionion, welcome to the forum.

  I'd be happy to help you in your choice.  The main problem is, recent video cards require UEFI in the motherboard instead of a standard BIOS to legacy.  HP didn't start using UEFI until mid-October 2012.  The latest maps not requiring UEFI were the series GTX 640.  However, MSI has made a card that has a VBIOS hybrid which can operate with a BIOS.  The best thing to do is to choose a video card you like and contact Technical Support from the manufacturer to ensure that it will work on your computer as it is almost 7 years old.  This will save you problems.  They are the experts on their cards.

  I like Corsair power supply units (PSU).  I suggest at least 500W.  This will give you plenty of power for any card that works in your computer.

  If you have any other questions, let me know.  I'll be happy to help you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• CPU limitation with the new power supply

  Hello

  I have a W510 with 135W POWER supply. Or to be more precise: A 6.75 @ 20V.

  I work at two locations, so I bought a generic 150W PSU with an adapter to mount the Thinkpad. The PSU is labeled 7. 5A @ 20V, so there should be no problems running the laptop.

  Yet, when starting, I get the "this power supply is too low for something something something battery charge" and strangled my i7 at 1.2 GHz, and not the 3.06 there are usually.

  If I boot from the battery and connect the connector of the power supply after Windows is in place, it works at full speed. And to charge the battery very well. Then of course, there is nothing wrong with the juice from the PSU.

  Thus, I suspect that the BIOS does something stupid. Can I override this somehow?

  Friendly,.

  A guy

  Maybe what the ThinkPad does not does not correctly detect the generic adapter. The central axis of the generic adapter does not give the right signal to the laptop power management firmware.

  Check in the ThinkVantage power manager what to say under the generic adapter 150 watts? He said 90 watts?

• Can I use X 200 with X 230 power adapter?

  I just bought a laptop ThinkPad X 230. I have an older ThinkPad X 200 with 3 power cords (adapters). Can I use the X 200 adapters with the new X 230 power or do I have to buy new ones?

  Yes the X30x, X6x and X 200, X 201, X 220, X 230 (and variants of the Tablet) all uses the same type of power adapter. So the answer to your question is Yes, they are compatible.

• Dimension 4600 doesn't work with the new power supply

  Hi all

  I replaced the power supply in my 4600 today so he would welcome a Nvidia Geforce 7950GT AGP.

  The model is an integrator of Aerocool 500W 80 Plus Bronze. http://www.Amazon.co.UK/GP/product/B00JKVHKSU?

  The 4600 has two sockets on the motherboard. A 20 pin and 4 pin. The new power supply had a 24pin cable that I shared, so it became 20 + 4.

  It is not working properly. With all the connected cables (2 cables for the mobo) and 2 connectors molex to drive HARD and CD - R, there is a flashing orange light on the front of the computer and a green light on the motherboard. Some discs don't look, no noise. Nothing is on. If I remove the power cable from motherboard 4 pin POWER supply lights up and the fan from the CPU. There is no problem when I connect the old Dell 250w PSU back up.

  Some of the reviews on Amazon have said that some cable has been connected to wrong and only he re-wiring to work. I don't know if this applies to me? I took some pictures of the connectors. http://imgur.com/a/6m9pu

  Someone at - it ideas?

  Thank you

  Andrew

  AV115

  Hi all

  I replaced the power supply in my 4600 today so he would welcome a Nvidia Geforce 7950GT AGP.

  The model is an integrator of Aerocool 500W 80 Plus Bronze. http://www.Amazon.co.UK/GP/product/B00JKVHKSU?

  The 4600 has two sockets on the motherboard. A 20 pin and 4 pin. The new power supply had a 24pin cable that I shared, so it became 20 + 4.

  It is not working properly. With all the connected cables (2 cables for the mobo) and 2 connectors molex to drive HARD and CD - R, there is a flashing orange light on the front of the computer and a green light on the motherboard. Some discs don't look, no noise. Nothing is on. If I remove the power cable from motherboard 4 pin POWER supply lights up and the fan from the CPU. There is no problem when I connect the old Dell 250w PSU back up.

  Some of the reviews on Amazon have said that some cable has been connected to wrong and only he re-wiring to work. I don't know if this applies to me? I took some pictures of the connectors. http://imgur.com/a/6m9pu

  Someone at - it ideas?

  Thank you

  Andrew

  AV115

  Have you used the connector 4 pins, which was part of the 20 + 4 P1 12v connector, connect to the P2 4 motherboard connector pins 12v?

  
  See 41, J5B1 Connector [aka P2]

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

  
   http://www.AOne.co.UK/prodinfo.asp?ProductID=4523

  Connector 4 + 4 pin 12v PSU is divided into two 4-pin connectors and one of them, can be used for the P2 motherboard connector.

  Bev.