H8 - 1360t - page load HP Pavilion constantly and does not connect to internet

Similar Questions

• HP Pavilion DM1: Laptop does not connect to Internet

  My HP Pavilion dm1 is not connecting to the internet.  I know it's a older laptop (I bought it in 2011) but everything has worked very well so far.  It shows my network is available and I was able to access the internet from my phone to my roommate, but my laptop does not connect.  I have tried all the usual stuff... rebooted the laptop several times, ran troubleshooting, unplugged the router and the modem.  I noticed it happened after I installed an update of Windows, so I uninstalled the updates and still no luck.  What should I try next?

  Hi @slmahan ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dm1-3025dx laptop and with the wireless for Windows 7. Here is a link for the wireless connection troubleshooting.

  If you click on start and go to the Manager of device-Do you see the network map?

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system, it has built in support troubleshooting wireless.

  I would like to know how this happens.

  Thank you.

• Firefox starts in offline mode work and does not connect to internet

  Firefox disconnects randomly internet. Work off line option is checked then when somehow naked - Firefox still does not connect. A re-start the computer him more often, solved the problem. What is new and I did not any changes recently. Running Fox 3.6.3

  Try going to Tools - Addons - Extensions and disable your extensions one by one to see if one of them is at the origin of the problem.

• updated from XP to Windows 7 and does not connect to internet

  I'm upgrading to a computer running XP on a Windows 7 computer.  I have all the wires and cables connected and in the correct places, but now with Windows 7 computer, I get a message that I am not connected to the internet.

  I unplugged the computer Windows 7, rehooked the XP computer and everything works fine and connects to the internet.

  I wonder... I must have an ethernet cable to most recent update with Windows 7 computer newer than what I used to the old XP computer?

  Thank you!

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Z30 Z30 blackBerry does not load unless it is rebooted and does not connect to the link

  My Z30 will load only if it is connected to an AC charger and the Z30 is restarted. My Z30 does not connect to my PC via USB. My Z30 running OS 10.3.2.2639. I did a soft reset (how I learned that it charges a restart), and recently completed a wipe of the device security. I bought the phone on October 5, 2014, and now is not working today. My dealer I come to, their store policy is only good for 30 days after purchase and referred me to go look at the manufacturer's warranty. The manufacturer's warranty is for 1 year. I just went this year a few weeks ago. Doubly upset right now!

  Hmmm... except maybe Pinterest, it is difficult to infer any specific causal event of this sequence; I hope that you have already tried to remove this app to see if things have improved. But before more destructive measures, please run the BBVE on the device to see if it provides any useful information:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035973&language=English

  Also, that you take a LINK backup in order to recover? For example, if you know your configuration selections, the home screen configuration, add apps, claim, etc., then you can skip the backup and reconfigure simply from scratch. But note that it also requires that use you the best practice method for Contacts and calendar, in that your device does not have the data source 'master' for those, but rather some services online (e.g., Google, Outlook.com, etc.) is the master, and so when you reconfigure these data will simply restore servers, no LINK restore to get the data on your device.

  Let us know.

• HP Pavilion dv7 - 3188cl: HP Pavilion does not connect to Internet (resolved)

  I recently got a HP Pavillion Entertainment, model number dv7 - 3188cl, for me to use for a class at the school by my uncle. Before the recovery, everything worked perfectly well. My uncle asked me to reset the computer, so we used the recovery disks that wiped the hard drive successfully but then refuses to reinstall the operating system. Instead of getting another set of recovery disks that I've used a Windows 7 install disc to reinstall the OS and he did so successfully with one flaw, the laptop does not connect to the internet.

  I tried to connect via ethernet and it does not find my WiFi network. I suspect his lack a driver and checked for drivers on the HP site but he said that there is none. Any advice would be greatly appreciated, and if there is no driver for this I would be grateful if you could tell me where to download from.

  Thanks in advance.

  Update: after some search Intel had the good driver needed.

  All your Windows 7 drivers (and some) are displayed on your Support page:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-3100-entertainment-notebook-PC-series/4074368/model/4150173#Z7_3054ICK0K8UDA0AQC11TA930O2

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• HP Pavilion 15 p000su does not connect to the projector

  I have HP Pavilion 15 p000su with HDMI output and tried to connect via an HDMI cable / VGA, I bought and it does not connect. Can't identify with it (find it in the options screen). I need for work also tried at home to connect it with my TV with the same cable and still not find... I'm really not much into things of this cable and asked a guy who told me about this cable HDMI / VGA. He tried to connect with 2 cables, a vga, and a hdmi with some cards, but didn't connect the projector. The drivers are correct and everything is fine. Any suggestions?

  Hello, @YanV

  I see that you are having problems getting anything to connect via HDMI. I will try to help you with this.

  Here are a few documents that can help:

  Connect a TV or monitor to your Windows 7 PC using HDMI
  Connection of a monitor, projector or a TV (Windows 8)

  Start with that and let me know how it goes.
  Thanks for posting on the HP Forums.

• Subcircuit pines are not aligned with grid and does not connect

  I have two symbols the same sub-channel.  One is fine, but the other has pins which are not line up with the grid of MS and who does not yet connect.  MS12.0.0.

  This one is very good:

  

  The pins are off-grid.  The circle will not connect.

  

  Hello

  I did experiment a little with this. One thing you can try is to open the symbol Editor, select the axis that does not connect and then the spreadsheet view, change the shape of pine of length zero. Then try and see if you can connect to the PIN in the design. It will not appear as a line, but you should still be able to connect to it.

  If this does not work, you can open a service request and we can try to see how to solve the problem.

  I hope this helps.

• WPA2 and WPA2 enterprise for Pavilion dv6t-3000 does not connect

  We have a WPA2 Enterprise network running on a Cisco Wireless Lan Controller.  The controller is 4400 series and the Aironets are 1130 G Series.  The problem is that this brand new computer not connect to this network from time to time and when it connects it times out.  This works for all Mac and PC computers.  What should I do for this HP pavilion dv6t 3000 to make it work on our network?

  Other information: the networks that aren't encrypted work very well.

  Intel(r) Wifi Link 1000 - Wifi card

  Thanks to another message board. The answer was.

  The second connection to the wifi card has not been set.  Open Bay for the wifi card and just reconnected the wireless card connectors.

• Pavilion dv7 - 1023cl does not connect to 1 Gbps but other devices will be

  According to the specifications of my laptop Pavilion dv7 - 1023 cl, it has a gigabit ethernet port, but no matter how hard I try, I can't get it to connect to my network at that speed.  Instead, it connects to 100 Mbps / other laptops, including a model dv7 later have no problems connecting to 1 Gbps.

  I took it completely and then reinstalled the ethernet driver realtek from the hp support web site, but it still connects only to 100 Mbps.

  Anyone has an idea why this does not work and what I can do about it?

  Thank you.

  According to the specifications for the DV7 - 1023 cl, page the ehternet port only supports 10 / 100 Mbit/s and this would explain why the 1 Gbps is not negotiated.

  Where did you see that it supports 10/100/1000?

• Update to Firefox 8, falls down and does not connect to a Web site, what do I do?

  Before I updated, I could open, load a website quickly and we were on our way. However, I opened it and most of the time it HANGS after that click on a bookmark or type a site.

  Even when it does not crash, it does not load a Web site. I try another browser and load very well the network Web site is NOT the issue.

  I uninstalled the new Firefox 8 and returned to 7.0. I'm happy for the moment, but this problem is worrisome.

• I've upgraded to Windows 7 Ultimate and now my system does not connect to internet and my built in webcam does not work.

  help please

  I tried to upgrade the verson windows seven that came on my computer vaio to windows 7 Ultimate edition. now I can't connect to internet, my built-in webcam does not work, the menu drop-down selector top of page disappeared and I do not see where there is no improvement in the operating system. That's happened?

  This thread was created in the Windows Update forum.  The moderation of Microsoft answers team has moved to forum installation, upgrade, and activate.  Thank you.

• HP Pavilion dv7 Wireless does not connect.

  Hi people!

  I ask kindly for your help.

  See I have a HP Pavilion dv7 laptop running Windows 7 and I can't connect to wireless networks.

  It seems that my wireless network card works very well as Windows told me so, but enabling/disabling it does no good result...

  all I notice is that

  -The wireless card drivers are up to date and that the unit works very well.

  -L' wireless connection icon in the bottom right has a red X and it says not connected... But it does not detect any other wireless networks.

  Thank you for your help.

  Hello Carlos.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem can occur for the following reasons:

  -Wireless adapter switch is not activated.
  -WEP, WPA or WPA2 key or password security issues.
  -Cables are not connected properly.
  -Network corrupted or incompatible drivers.
  -Missing updates.
  -Incorrect network connection settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• B210A Photosmart - server connection error and does not connect to the wireless router

  I have problems setting up and to connect my router to my new printer b210A. Everything goes well with the initial configuration, and when asked to connect to the network at the start, it works. Then he said that the printer requires updates, downloads of updates, reboots, asks me if I want to activate eprint and as soon as I said 'Ok', I get a "the server connection error" and it is then no longer connected to the network. When I get out of the "server connection error" screen and attempt to reconnect to the network, he says 'Success', prints a Test report wireless, but never connects.

  It's the 2nd printer that I have had in a week, given that the person of HP online chatting told me my first printer had problems of "hardware", after experiencing the same problems and I'll be recommended. So - I did, and now I'm running into the same issues. The number of 800 was NO HELP - after recommended I have unplug and reconnect, then telling me there were server errors (when the printer was not connected to the network).

  We will set an IP address of the printer with a special focus on DNS domains:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.