HA and power outages

Similar Questions

• Help, please! 610n router disconnects cameras and power outage at the broad need to re-establish the connection

  I need a set of patterns for tab wireles on the configuration of the router.

  I put the cameras on a fixed address. That did the trick

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• Power outage caused all the catalogs and folders to disappear, LR3.4

  Running LR 3.4 on a PC with Vista 32 bit when there was a power outage in the region. I turned off the 'power' to the PC.

  When the current was restored I rebooted the PC and LR and all the catalogs, folders and the files are all gone

  and LR wants to begin importing as it has just been installed. The last time the lrcat has been saved was June 20.

  I was wondering if there is a more lrcat to hidden somewhere in the PC because it works well or is there other

  way to recover my last two days work and restore to the point just before the blackout?

  Enjoy any suggestions before I get back since June 20 upwards.

  Well, a side note here: you did not change anything.  You see, LR at startup, it creates a .lock file.  You had LR running, then deleted a .lock file, which was for the _currently_running_LR_, not the missing catalog file.

  First thing I would do would be to do a complete search for any file ending with LRCAT.  Yes, as mentioned, you can find the location of the currently selected catalog by looking in the catalog settings, but he won't tell you that you have opened a bad.  :}

  So first, find all files ending in LRCAT.  So try them, one at a time, by double-clicking on them. If it's not her, out, double click on post then a.

  Good luck!

• Bookmarks lost, restore doesn't work (backup files exist), empty library, power outage this morning, HELP.

  power outage this morning... dunno if Firefox was open

  Now the go bookmarks

  library completely empty

  Restore backup gives the message: "failed to process the backup file".

  cannot save new bookmarks

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

• After a power outage, I can't start after the Windows XP logo.

  Original title: power failure

  Power outage caused the computer shut down when I turned the computer back on it will also further than the xp logo window and start the whole process again, he seems to be in a loop, how do I fix it

  Trying to boot into safe mode by pressing F8 after feeding on.then restart system & try, if not

  Run the disk check
  After starting in safe mode

  Start - Run and type CMD at the command prompt type CHKDSK/f

  OR

  repair the operating system.

  Kind regards

  Chauvet J.

• Problem starting after power outage

  I am running XP Professional. Last Nite we had a power outage and now I can't get my Dell E510 to initialize. When I reboot, I get a message that my hard drives cannot be seen. I tried holding F8, but it doesn't get me nothing, but the same message. Disc I tried diagnostcs but the computer says it can't see the disks. Any help would be really appreciated.
  Frankdarpa

  Hello

  1. What is the exact error message?

  You can check the troubleshooting provided in the link below steps to fix the problem.

  http://support.Microsoft.com/kb/321626
   

• We had a power outage, when I tried to re start my computer that I seem to be in a loop

  running don't win Xp, up until now no probs

  We had a power outage, when I tried to re start my computer I seem to be in a loop, after the original screen I get a message saying there is a faulty attempt to restart please use one of the following departure, upward in SafeMode etc it returns right on the same page black and white How can I break this loop?

  Often, a power failure will result in the corruption of the hard drive that can prevent your computer from starting properly.  Often, simply perform a 'chkdsk' with the /f or/r (chkdsk C: f) option on the hard drive will fix the problem.  Given that your machine does not start, you must run Chkdsk from the Recovery Console or start your machine from a CD for example bootable BartPE or Ultimate Boot CD for Windows and perform the chkdsk operation

  "How to install and use the Recovery Console in Windows XP"
    <>http://support.Microsoft.com/kb/307654 >

  HTH,
  JW

• After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

  After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• PC business shows "this copy of windows is not genuine" after a series of power outages this morning

  Hello.

  According to other posts, I read on this forum, I have downloaded and run Microsoft Genuine Advantage Diagnostic Tool 1.9.0027.0)

  Here is the output from the top of the program:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - MV8MH - 98QJM-24367
  The Windows Product Key hash: wgci5Gdejx4esg7 ++ zTOe3LWF + 4 =.
  Windows product ID: 55041-OEM-8992671-00437
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {4EF2BF7F-1125-4B2E-8F80-E8C9C810AD54} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4EF2BF7F-1125-4B2E-8F80-E8C9C810AD54}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-2436755041-OEM-8992671-004372S-1-5-21-556887043-3575416894-1936512369LENOVO7052A7ULENOVO9HKT54AUS20121016000000.000000 + 00041563E07018400FE04090409Time(GMT-08:00) Standard Pacific13LENOVOTC-9 H 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514
  Error: the product key is not found.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 10:8:2014 17:51
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LAAAAAEAAQABAAIAAAABAAAAAQABAAEA6GHgk + KnXL90GK4pfFsqNMp4LnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TC - 9 H
  FACP LENOVO TC - 9 H
  HPET LENOVO TC - 9 H
  MCFG LENOVO TC - 9 H
  SSDT LENOVO TC - 9 H
  SLIC LENOVO TC - 9 H
  ASF!   LENOVO TC - 9 H
  TCPA LENOVO TC - 9 H

  After several power outages, it restarted and reported that it was not authentic. It was pre-installed Lenovo machines.

  I did a restore of the system to the oldest restore without changing point.

  This is urgent as a manager must Access this PC and data therin.

  Error: the product key is not found.

  Windows Activation Technologies-->

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• My new S2440L face the problem of power outage

  I have just purchase S2440L to replace my old S2340L. With S2340L, I have never have any problem of power outage but when I plug my new S2440L, it was goes black for a few seconds. The problem was random 10 minutes to 40 minutes. These two monitor was same HDMI cable (and work fine on my SmartTV too), PC same and even graphic card driver. I try to reinstall a fresh driver but still a problem. Is - it could be hardware related? Perhaps S2440L have a hardware problem or a S2440L need a more specific HDMI cable? Now I have any problem with my S2440L. the blackout has been occur when overheating circuit behind the monitor. I was watching about about on the HDMI port of overheating by googling and found that HDMI can fail if the (amplifier HDMI) circuit was overheated (I'm not have overheating issue on my old S2340L (rev.) A00). i sure as S2440L (mine is rev. A01) have material problem on HDMI and circuit surprise (lower part of the monitor) have very high temperatures. I hope you, Dell will be it is your responsibility that your monitor, S2440L have an overheating problem / high temperature and could be a HDMI port blackout curtains. It's bad for me avoid this problem by using the VGA port.

  Thank you, ChozeriZes.

  Christ

  I just touch the border smaller surface compared to the top edge, it is very hot.

  maybe only my S2440L have this problem...

  Today, I remove my VGA card and the power cord, and reinstall the whole again, the problem in black often seem to not like it before summer. It's just a couple of times for that day.

  Actually I feel fine with this monitor, both design and image, but still nervous about high temperature, it's may be the major problem in the long term.

  Maybe I was too early to conclude everything... HDMI is a very sensitive matter, as I said in a previous comment, then I have some tests for my S2440L

  -overclock grid power my VGA card around 2% and delete some fan of my system.

  -find the new place for the power adapter avoid the heat. (I found this use of monitor LG IPS 1. 3a adapter 19V is perhaps)

  Note: I use 750W Seasonic and power supply of 5V and 12V is pretty good (5.1V and 12.05V).

  OK, now I need to close this thread as solved and and report this problem like power supply problem; in major relate.

  "on monitor blackout curtains when use the HDMI port occurs when power on unstable system will also be able to rack in the House, heat and cable must use HDMI1.4 full spec for sure (if HDMI cable does not include with the package).

  Best regards

  ChozeriZes

• power cord and power cuts

  Hello.  I have a Pavilion dv7-3171nr, Windows 7.  It's a laptop.  In the last few days, I noticed some strange things that I've finally pinned down for my power cord.  I've been hear a sound like a bug zapper.  Not as loud, very weak, that's why it took me so long to locate where the devil noise came from.  When I hear the noise, it caused small power outages in the lamp which is located in the room in which I work.  Then, of course, at first I think it is the lamp, or the light bulb, our electric system... Anyway yesterday I finally put the finger on it at the exit of that my power cord is plugged.  When I unplugged it, all of these symptoms have disappeared.  At that moment, I realized that it was plugged in all the other times also in all other rooms, I was in when all this was going on.  Everyone knows about this problem with a power cord?  I had a lot of laptops over the years and this is a first for me!

  Good decision.

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• How to remove the front rear of the Tecra S1 PT831A to check cable and power?

  Hello

  I need to "check the cables and power," following the Seatools for test back and start-up message 'failure to support, check cable PXE - E61'. I also have a message for the CHKDSK using the XP Pro CD, saying after 26% that "the volumn appears to contain one or more unrecoverable problems".

  Remove all screws B6 or what else - to remove the back cover for "check cable"?

  Startup by default, without failure, then to BSOD Mode screen whatever the choice is taken, the BSOD is too short a period to read the message, and there is no option in the choice of Safe Mode to disable "Restart in case of failure".

  I removed and reinserted the RAM and HARD drive without change to issue.

  Hope this makes sense and someone can give advice.

  Concerning

  Wagga

  Hello

  Each laptop has in the list of all bootable devices BIOS. If none of them can be used the last of them, LAN port, is checked, and then you'll see this message PXE - E61.
  If the problem may be your HARD drive.

  First check HARD drive. Enter the BIOS and set it to default settings. Restart the laptop and check if the HARD drive is recognized and registered properly in the BIOS settings. If so he has no problem with connectors.

  I recommend get you the new HARD drive for testing purposes. Put the new HARD drive and try to install the OS by using the original Toshiba recovery disc.
  Please post comments.