Similar Questions

• Problem with Oracle fail safe 4.1.1 on W2k8 R2 Cluster Failover and Oracle 11.2.0.4 database

  Hi all

  I'm doing some tests on a Windows 2008 (64-bit) R2 two-node failover Cluster.

  I installed and configured successfully bone and the Failover Cluster feature.

  So I followed Oracle Doc-ID 1916391.1 to perform the installation and configuration of Oracle 11.2.0.4 database and Oracle Fail Safe 4.1.1

  After a successful (via Fail Safe Manager) validation of cluster and group, now I'm trying to validate the stand-alone database, but I'm stuck with this error (output in verbose mode of PowerShell):

  PS C:\Users\demo > Test-OracleClusterAvailableDatabase TESTDB - SysPwd (Read-Host-AsSecureString-Prompt "SYS Password ')-verbose

  SYS password: *.

  DETAILES: FS-10915: NODE1: from verification of autonomous resources TESTDB

  DETAILES: FS-10371: NODE1: run the initialization processing

  DETAILES: FS-10371: NODE2: run the initialization processing

  DETAILES: FS-10372: NODE1: resource owner information collection

  DETAILES: FS-10372: NODE2: resource owner information collection

  DETAILES: FS-10373: NODE1: determine the owner of the TESTDB resource node

  DETAILES: FS-10374: NODE1: collection of cluster information required to perform the specified operation

  DETAILES: FS-10374: NODE2: collection of cluster information required to perform the specified operation

  DETAILES: FS-10375: NODE1: analysis of the cluster information required to perform the specified operation

  DETAILES: FS-10378: NODE1: preparation for the configuration of resource TESTDB

  TH: FS-10349: database TESTDB instance is not alive. You want to stop and restart the database instance?

  Confirmation

  Operation does?

  Running dell' operation sulla "Test-OracleClusterAvailableDatabase' likelihood 'TESTDB '.

  [S] Sì Sì [T] a [N] no [U] tutti a tutti [O] Sospendi [?] Guida (he valore predefinito e "S"):

  DETAILES: FS-10350: from the TESTDB database

  Test-OracleClusterAvailableDatabase: OCIEnvNlsCreate failed

  
  

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10999: an internal programming error

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10160: impossible to verify the Oracle of standalone TESTDB database

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10818: provider of resources of the database Oracle failed in preparing for

  treatment for TESTDB resource configuration

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10890: Oracle Services for MSCS failed during the verifyStandalone operation

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Attached is the log of the OFS Cluster Dump (no error in my opinion).

  I surfed around but I can't find anything to solve the problem.

  I think something about the language of the (Italian) OS and Oracle NLS settings (AMERICAN. AMERICA), but obviolsly I'm not sure about this.

  Thanks in advance for any suggestion,

  Alessandro

  Message modificato da 1d457339-524e-4aa5-94aa-fd7d1ae98732 updated: attached is also output trace of the fss.

  Hello Alessandro.

  Solution to the issue is:

  Patch 20744940: 4.1.1.1: ORACLE FAIL SAFE VERSION 4.1.1 PATCH SET 1

• Alarm of cluster failover

  I do an upgrade of the host, but I noticed a few /warning alarm in vSphere client: Configuration problem: vSphere HA initiates failover of virtual machine action in cluster2 in xxx data center, but there is no virtual machines on this host. I moved all virtual machines to different hosts. This error will not go away. Please notify

  Looks do not affect any current VMs, just a warning: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004802

• Unexpected events of the virtualized Windows Cluster Failover?

  I'm running into a problem where I see the unexpected events of failover on a cluster failover of Server 2008 running on four hosts ESXi 4.1.  ESXi hosts themselves are not grouped.  Each ESXi host running a single Server 2008 VM.  Each virtual machine has the latest version of VMware tools installed.

  The problem is that, once every two days or more, one of the nodes in the Windows cluster release out of the cluster without apparent reason, which triggered a failover event.  So far we have not identified any root cause in any component of our infrastructure (eg. network switches etc.).  The VM guest that always falls out of the cluster during these unexpected failovers joined the cluster after a few minutes or more.  In the event of failure, the virtual machine that injects seems quite good other than the event of failure of the cluster (for example, the virtual machine does not drop even pings).  In addition, it is always a different VM that we see this problem with, it is not always the same.

  Any ideas on what could cause this problem?  The thesis that we have currently is that there could be some problems with the cluster questions missed by Windows during the card NETWORK active/active configuration that we have on the vSwitches on the back-end.  We plan to change that active/passive.  VMware's recommendations one way or another?

  I already read the article below as well as VMware MSCS on vSphere 4.1 guide, but none of them seem to deal specifically with underlying vSwitch configuration.  Any input on that?  Ideas on the thing we should look at?  Thanks for the help!

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002890

  Ahh, so that's another problem.

  In the guide 4.1 MSCS, 'section, vSphere MSCS Setup Limitations limitation', he States:

  With native multipathing (NMP), clustering is not taken in charge when the strategy of path is set to round robin.

  -KjB

• How to cancel the configuration and reconfigure the cluster HA.

  How to cancel the configuration and reconfigure the cluster HA.

  complete step by step to do this...

  VPX is just the vcenter only. You must follow the KB and watch the folder for example:

  Info NŒUD 6 Nov 14:02:06 Mar 2007
  By: FT/Agent on the Node: servername3
  MESSAGE: Servername1 Agent stopped

• HA Configuration CentOS 5.1 cluster issues

  
  We have a cluster with 2 HP ProLiant DL360 G6 machines, connected to the NAS.

  Both machines have the Image profile: HP-ESXi - 5.1.0 - standard-iso

  Each ProLiant 36 Gb internal mem, 50% by server in use.

  On the cluster, 9 VM. 5 x Win2008R2, unit of Citrix NetScaler 2 x and 2 x the CentOS 4/5/6 (64-bit)

  Current host support gap: 0.036

  No problems with windows and Citrix VM.

  The virtual Windows machine: Version VM: vmx-09

  CentOS VM: VM Version: 8

  Now, the provider of railway Mobile installed 2 machines, CentOS 4/5/6 (64-bit).

  In the vCenter console, you receive the following message:

  "This VM could not become vSphere protected HA and HA cannot attempt to restart after failure."

  VMware States KB: not enough resources for failover. Hardware or add another host.

  I have to disagree. Someone at - it good advice for me?

  Thanks in advance!

  How you have configured HA for Admission Control?

  André

• Problem of cluster Failover MS after physical RDM conversion to VMDK

  Hello

  Last week I had to migrate 7 x 2-nodes virtual MS Failover clusters to a new data center. All clusters have been configured with the configuration of the cabin and all shared disks were in physical RDM mode.

  The target data center does not RDM disks so I had to convert all RDM disks VMDK files and use config before the migration of the IPC.

  I used vmkfstools to convert VMDK eagdrzeroedthick RDM files.

  5 clusters have been migrated successfully, but two cluster got strange question even if the procedure for all groups was the same.

  So in two groups, I have a problem where the second node in the cluster can not put online some of the shared disks. The first nodes in the clusters have no problem with the disks/SSP.

  But when I try to failover of all services, the second node may not bring online disc 1 or 2 shared, even if she can put the other shared disks online.

  VMKernel.log is not errors or warnings. I checked the configuration of virtual machines and everything seems OK.

  Any ideas what I could check?

  Just in case anyone else is facing the same problem.

  I could not find the root cause of the problem, even if it's without a doubt the conversion that triggered the problem. However, we found quite a simple solution - added new shared VMDK files, copied the files over and replaced the defective discs.

• DRS & HA cluster vm actions aware?

  Hello

  In fact, we do a cluster design and decide to implement part on VM.

  The cluster will be active HA and DRS and consists of 3 ESX (2.5up3 VC) and ESX 3.5up3.

  However, if the HA the current ability to failover cluster is 0 (3 members use 80-90% of the resource of the RAM for example) and the ESX which perform actions large VM (the RAM) crashes, what will happen?

  I have disable CAC HA on the Cluster, but so much VM RAM booking, the other 2 ESX will force the lower proportion of VM to swap to free up RAM co-location for the largest reserve of VM to share? Or much VM does not start because ESX can offer a reservation RAM?

  Thanks in advance.

  exactly - it's true for memory and CPU

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• sqlcl error java... getting started configuration issue

  Hi all

  Enjoy everything that goes into making better equipped sql * more the type of tool.  I tried to get the sqlcl to work today for the first time, and it seems like I'm hitting an immediate road block that seems to relate to my situation of java from windows.  Here is the error in question:

  C:\oracle\sqlcl\bin > sql - optl

  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/dbtools/raptor/scriptrunner/cmdline/Sqlcli in (UN

  supported major.minor version 51.0)

  at java.lang.ClassLoader.defineClass0 (Native Method)

  at java.lang.ClassLoader.defineClass (unknown Source)

  at java.security.SecureClassLoader.defineClass (unknown Source)

  at java.net.URLClassLoader.defineClass (unknown Source)

  in java.net.URLClassLoader.access$ 100 (unknown Source)

  java.net.URLClassLoader to $1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClassInternal (unknown Source)

  C:\oracle\sqlcl\bin >

  You have any suggestions on how to fix this so that I can move forward?  I have to play with sql.bat to identify the java_home?  If so, do you have an example?

  Thanks in advance for any help provided.

  Tom

  Update:

  Was certainly the java version showing a very old 1.4.  The configuration error was in my windows PATH variable env, which contained a very old version of java related to a former Oracle BI installation I've had.

  The fix was to remove all references to this former location of java in the path variable.  Once this has happened, I was able to shoot to the top of sqlcl immediately without problem.

  Thanks a lot for the suggestions of Jeff.  No doubt the eureka moment I needed to sort.

  Now to start your fun with this new tool!

  Thank you

  Tom

• Oracle RAC GNG (grid Naming Service) configuration issue

  Hello

  When GNS is configured on a cluster, the IP addresses are automatically generated for:

  Node IP

  Virtual IP node.

  Also be generated automatically for private cluster IP address?

  Is it so?

  What requirements must have servers to work correctly the allocation of IP interconnection?

  T is supported using the new ability of GNS HAIP?

  Thank you

  Arturo

  Hello

  Please find the answers to your questions below

  Also be generated automatically for private cluster IP address?

  Is it so?

  Answer: No, Private IP set intellectual property and they must be configured explicitly

  What requirements must have servers to work correctly the allocation of IP interconnection?

  Answer: Could you elaborate a little bit regarding the above query?

  T is supported using the new ability of GNS HAIP?

  Answer: There is no concept if GNS for HAIP

  Ref: Grid of redundant interconnection Infrastructure and ora.cluster_interconnect.haip (Doc ID 1210883.1)

  Ref: DNS and DHCP configuration example of Infrastructure of grid GNS (Doc ID 946452.1)

  Kind regards

  Vautrin - Oracle

• Retrieve message to ESXi host Summary tab "Configuration issues."

  Using VMware Perl SDK API, how to get the message of 'Problems of Configuration' tab summary ESXi host?

  For example, I have an ESXi host disconnected from the cluster, and in the summary for this host tab, there 'Problems of Configuration' message "disconnected from esxi_hostname in esx_clustername." "Reason: expired license."

  Is it possible to recover the message above through Perl SDK API? The host is already disconnected from the cluster, not sure if this is possible.

  Yes, you can take a look at the configIssue (http://vijava.sourceforge.net/vSphereAPIDoc/ver5/ReferenceGuide/vim.ManagedEntity.html#configIssue) for the object HostSystem connecting to vCenter, i.e. When this information appears. It contains a table of configuration problems and it is exposed in the API, which means that it can be accessed by using one of our SDKs including the vSphere SDK Perl

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• Portably SA60-652 - configuration issues

  On startup, I get a small "Windows Installer" window trying to configure the Office 2000 program and ask to insert a Microsoft Office 2000 - Rom2 CD, which was not included with the computer.
  How can I solve my problem? Thank you
  David

  Hello

  Can you please tell me when you get this message? At the start of the CE (operating system or Office 2000 program)?

• Folder, permission issues, launch or directory? Help, please!

  Hi all

  I'll try to keep this long history of strategies to solve problem as brief as possible. MBP mid 2010 Yosemite running started glitching around Christmas (CPU, memory and requiring hard reboot followed by a freezing kernel panic) and I began research on what might be wrong. Makes backups (clone SuperDuper and TM BU). Make a disk bootable for El Capitan. Tried the usual suspects... check disk, disk repair, SMC reset, reset the NVRAM, etc.. Problem persisted. I tried clean of El Capitan and utility disk installation failed to go back and take down? disc after erasing. Bought a new SSD. SSD formatted and installed several times and several times there no shortly after or during the installation of El Capitan (gray screen with "no symbol" indicating no OS). Replacement internal SATA cable - that did the trick with the original hard disk installed with a clean install of El Capitan. Kept new SSD in attachment and clone of Yosemite BU SuperDuper copied on it (as she has MS Office - I have the product key). Can start from and access all of the SSD connected via USB, but some of the original problems (high CPU and memory) remained. In recovery mode, I have reset the directories for all users and administrator. I have improved the SSD to El Capitan and the problems continued. Console reads the questions with the lsd, mdworker, WindowServer and iconservicesagent (mostly). Tried to fix the permissions and cleaning of the caches using Onyx, which did fix some problems related to printers permissions. Need help, know where to go from here. Any help would be greatly appreciated!

  Thank you in advance,

  Pascal

  Kernel panics are most often due to problems of RAM.  But given that you've been through so many troubleshooting steps, it is difficult to know where things went wrong.

  For one thing, there is no clean install.  If you mean you erase and installed and persist in obtaining the kernel panics, he stresses more clearly material being the issue.  And since you have the Mac 2010, you will need the original installer disks to perform a test of expanded material.   If you have done this, the test reveals any problems, then you clearly have a RAM problem.   See my FAQ * about bad RAM:

  http://www.macmaps.com/BadRAM.html

  Otherwise, any error you get from the material testing, should be examined by an authorized technician.

  * Links to my pages give me an allowance.

• WRT310N configuration issue

  I am trying to set up a network at home via my WRT310N router N Wireless, but have a somewhat convoluted Setup, go home. More specifically, I have a Verizon Actiontec modem/router combo, G who is serving more than one PC Wired has provided, as well as some wireless clients. I would like to connect the WRT310N the ActionTec router and have a Wireless N dedicated va that can also access the internet, but also a handful of wireline customers. Two routers are connected wan wan port port.

  However, I don't know how to set up the "Internet IP" of the WRT310N so that both routers to communicate between them. If I put a static IP address which is identical to the IP of the router, I get a warning indicating that the internet IP and router IPS are on the same subnet and is not kosher (which I guess makes sense). Define the Internet IP to DHCP function results in no IP being pulled from the Actiontec router (presumably for the same reasons)

  Is anyway to configure the router behaves more like an access point?

  Worked like a charm. Thank you!