Similar Questions

• Redesign of the muse and SEO

  I've redesigned a Wordpress client site with Muse. Their existing site currently rises #1 in Google (Cairns hair salon) and I want to assure you that I'm not changing it (all the sites that I have worked on that day were only new sites).

  I kept the structure of the site itself with each page by keeping the same URL as the existing pages. Even the written content is virtually the same.

  If I simply download the new site to replace the current site, but don't touch any of the stuff Google Webmaster, the site will remain on top?

  The current site is www.scenehair.com.au and the site that I've redesigned home

  Any advice or pointers would be greatly appreciated!

  Sorry for the delay but the 301 redirects are essential for when you change the language that the page is coded in. since wordpress is php and muse is html, every page needs a 301 redirect.

  Here is an example:

  a Web page written in HTML:

  www.example.com/pagename.html

  a Web page written in PHP:

  www.example.com/pagename.php

  It won't matter if you keep the names of same page if you Web site are coded in another language.

• BOUNCING VISA Write error - hair pulling

  Running an application that uses some standard features.  Lies in stepper motor which is controlled by simply sending chains of command to the inverter via a serial connection.

  Update for Windows 7 (from XP) and thus to level to 2013 LV.    Now all of a sudden I get errors of the vi that writes to the port series. He'll sometimes for a few hours before appearing, sometimes 15 minutes.  There is not much consistency as to which iteration of the vi pops up the error.  I added delays here and there, put a delay in writing vi (attached), added a clear before writing pad, etc, etc.  This bug won't go away.  This is the error that appears...

  

  I have attached the vi.  It is about as simple as they come that's why I'm pulling what little hair I have left.  Two changes in this version of the original that ran forver on XP, the delay of 150ms between writing and close System (since door to 400) and I also changed the time-out on the configuration of ms 10000 to 5000 ms (10s and 5s).

  Once this happens then all series the connection with the computer is watered and I have to restart the system to get there again.  The computer, a relatively new dell, has a port built series ini and I use an expansion card StarTech for two additional ports. (2-port PCIe RS232 w / UART 16550)

  ANY help is very appreciated on what having to reset the system 10 - 15 times a day is killing me.

  
  

• Refine the tool missing - select and mask does not work on hair

  I also do not know how to use this tool. I need to select the edges of the hair and used the brush once I was inside the dialog box refine edge. This allowed me to use the brush on the edges of the hair, and he would choose loose bristles. Now select the and mask feature selects a large part of color that is affected by the brush and does not select just the strands. So I find myself with a person's head and a blob of 3 inches from the bottom red on each side of the head, because it acts as the tool magic wand or quick selection instead.

  How to make a selection with the lasso tool, then refine the edge and select the hair? I often hear to use the pen tool, but who's transformed into a selection eventually anyway. Is not wise to make a selection tool feather each and every time you want to select the hair - I make a selection of the entire body of the person and what part of it can refine the edge. Totally lost on how to select just the hair strands and refine the edge.

  Hello

  See this post: refine edge is back

  Stone

• Girl with red hair?

  This picture, the girl with the red hair, get on my home page, but when I click to access the photos and I'm not.

  Anyone know where I can get this picture?

  Thank you. Connie

  

  Just a redheaded woman with filters search has defined to include individuals and only search for Photos:. Appears in the first row.
  

  brand-tas

• Hair dye in After effects?

  Hei,

  My question is above.

  How can I dye my hair in darkest legacy?
  Thanks for your replies

  You can isolate any detail in a picture in AE, but it requires a fairly high level of competence and pre-production planning. The better pre-production planning and more the quality of the original film the easier than it is to do. It's all about creating mattes (masks). There is no magic click button problem.

  According to the pictures, it may require that you:

  • Follow in Mocha, stabilize Track Motion, Motion, track, track camera mask
  • Rotoscoping, Rotobrush
  • Adjust the color channels
  • Use the blend modes and pre and roto comps to combine multiple caches in a usable hand pole
  • Matte and adjustment layer with the (possibly dyed) color effect applied)

  To learn more about these types of techniques, none of the items in the field find help in the upper right of the AE and learn about the resources of the community.

  The basic procedure is to isolate the hair from the rest of the image. It is usually a 2-step process involving a rough selection (rotoscoping, mocha track) on a copy of a copy of your film layer, then isolate and separate the hair of the immediate background by manipulating channels color and luminance, so you can create a cache in order to limit a color changing effect. That's why pre production, planning and high quality is essential to the process. Blond hair blowing in the wind with your market through a wheat field model is going to be very difficult. Blond hair to the wind with your model on a dark background which is quite monotonous just is going to be difficult.

  Open the pictures that you plan to use and take a screenshot and drag it to the field of response on this forum so that we can see what kind of images you have to deal with. Yet these frameworks are all available on Adobe Stock video clips. If you have not drawn the images still find something similar and we are pointing to it.

  4 hours really hard work because of the soft edges and soft in the foreground - perhaps for 10 second tour:

  

  Easier - perhaps a few hours for 10 seconds:

  

  Well planned and shot - maybe call 45 minutes for 10 seconds:

  

  The most difficult part of this shot is separating the hair out of the face.

  Lastly but not least - of good luck with this one:

  

  It would be possible but blur of movement and the uneven background would be a bear to deal with.

  Here is a start on the "easy" one - the workflow is:

  1. Duplicate images
  2. Mask to follow from the outside of the hair and face
  3. Start working on the details of the outline of the hair using Colorama to get some dark borders outside the hair

  It's that I received this morning. Took me about 15 minutes. Here's what it looks like:

  

  The procedure will be repeated for other color values using additional hide until you have enough layers to combine in order to get a black mask and decent white generated when the hair is black and everything else is white. I guess about 4 or 5 more duplicates. The girl walks so I'd probably motion stabilize the whole thing so the rotation of the hand would be easier. I would use just a solid black to fill all the holes between it the edges. All duplicates in grayscale would be composed pre and which would be used as cache by approach for one layer setting I would use to tint hair. The second set of 15 shot probably would take two to three hours to perfect. Here's what it looks like with a layer of black shape quickly drawn to fill in the hair. The hard edges around the face and shirt can be fixed with some pre mattes more. The blonde is now a red head:

  

  Good idea for a tutorial. I should write a book - hint hint

• head turner activation results in my characters face, hair and eyes to disappear.

  Hey!

  So I made positions for my head of characters, they all look fine and work with keyboard commands, that I assigned, but when I activate the head Turner, at the front, his head disappears side of a piece of hair in the district stations, hair disappears, and in the position profile, her hair and the eyeball disappear.  I crossed checked with windego, and things are looking good, but I must be missing something.

  Two bonus bonus questions:

  1. in the quarter, and the profile its head detaches from the neck when I lie back but at the front, it works normally and do not detach. Any thoughts?

  2. I understand that I'm supposed to change the percentages of face (such as strength of head tilt and scale) individually, but they seep to have no effect. Thoughts?

  Thank you!!!

  

  In Preview 3, head Turner is named 'before' layers containing layers as your "front wrap." To avoid this problem, extract 4 (out since early summer) will only match "front-end". For now, except for the "Front" group itself, just rename all layers with "before" in their name to something like 'frnt.

  In addition, to make sure lip sync & facial features work in all views, make sure you have the two Lip Sync behavior & applied face:

  (1) at the root (this is the default)

  (2) on all points of view with the exception of the façade (which is the first, so it is covered by the root ones)-that is to say shift left/right and left profile

  Yet once, extracted 4 fact disappear this complexity - the pair of root will be applied to all faces & mouths in the puppet.

• PSE 14 - remove the bottom if the image is smooth hair?

  When I cut the bottom of the pictures of my Collie in PSE 9, he loses too much of the hair ends along the edge of the image.  I saw some video tutorials to the PS, which show very nice abduction background around a picture with flowing hair, but can be done similarly in future versions of the EPS?  I can't use a version of the software as my much too slow internet connection for this cloud so I am looking to buy a version of the software that is installed on the PC that will allow me to make beautiful cuts of my Collie without cutting the ends of the hair.  Is there a version of PS available that can be installed on a PC?  I don't don't need or want an entire suite, just of the photo editor.  What would you recommend?

  Joan

  I can't use a version of the software as my much too slow internet connection for this cloud so I am looking to buy a version of the software that is installed on the PC

  Off-topic, but this isn't how the Adobe Cloud software works.

  Cloud of Adobe software (Photoshop CC etc.) is still downloaded, installed and running on your local computer as it has always done.

  The part of the cloud is in software licenses and occasional updates.

  CC of Photoshop can run up to 99 days without an internet connection. Just do a license of occasional background check (seconds and is transparent to you) on the internet to confirm that you are up-to-date with your payments.

  Software updates can be done whenever you choose. You can leave for months without updating the updated running software are always recommended.

  That's all for the needs of the internet.

• I have trouble to get past step 1 in Lightroom getting up and running. Have spent the last 5 hours on it and very little hair left. Anyone out there to help?

  I have trouble to get past step 1 in Lightroom getting up and running. Have spent the last 5 hours on it and very little hair left. Anyone out there to help?

  Hi Craigb89524984,

  I saw your Adobe ID (email address) you used to post here on the forums and found that a subscription to creative photography Cloud inscribed on it.

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error code/message, if you found one? Please attach a screenshot. See, FAQ: how to capture and after a video screen or blow?

  What operating system you are using with his version?

  Until then, check out the links below:

  Download and install Adobe Lightroom CC

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Troubleshoot Adobe Creative cloud download, install and update questions

  You can also analyze the log files to find out the root cause of the problem: Troubleshooting Adobe Creative Cloud install problems with log files

• At the salon of photography, I asked in terms of creative photography of cloud. I need help to put in place.

  At the salon of photography, I asked questions about the purchase of Lightroom and I was advised to return to the plan of creative photography of cloud. I don't know what steps I need to put in place.

  Hi Arthur,.

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud to sign up to the Plan of creative photography Cloud.

  Once purchased, please refer to manage your Adobe Creative Cloud membership manage your members.

  You can download Cloud Creative https://creative.adobe.com/products/creative-cloud

  Write to us for assistance.

  Kind regards

  Shelly

• Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  For groups or layers Warp independently of their parent group, add a "+" to the beginning of the name of the layer in PS / HAVE. It's the same select group in the Panel of puppets and by checking the Warp option independently in the properties panel.

  Once a group is warping independently, it will be attached to its origin at the origin of the group from its parent by default. You can join a different handful in the parent using the fix to the popup in the properties panel. In Preview 3, if you want to move the origin, you need to do in PS / HAVE. In future releases, you will be able to change the origin directly in the Panel of the puppet.

  If this doesn't solve your problem, you can post a screenshot of the hierarchy of layer here, to see if there is another structural problem.

• How to select all the strokes at hair in a drawing

  warning I have exceded the limits to save a document or for printing too many strokes bristle (with transparency) and need to rasterize them. Is there a way to find them all in the work?

  Brush strokes are associated with other elements in the work?

  In this case, it might be a better idea to rasterize the entire piece.

  To select the strokes at hair: select > object > brushstrokes to hair

• Possible bug? Change the geometry on the hair, the changes are lost when the model is saved, then loaded into fuse again.  Is this a bug?

  When I save the changes to the hair using the tool change the geometry in a file .fuse on the computer.  These changes are lost when I load the model to the fuse.  Is this a bug?

  Saved to disk:

  

  Reloaded in fuse:

  

  Post edited by: Allan Chaney I've included screenshots.

  Thank you much for the details.  I tested it on Windows and Mac and reproduced.  Doesn't seem to be a bug (but not a guarantee).  I've done some characters, recorded their soft-mod-ness very well.  I connected with the engineers for more tests and we will have fixed as soon as possible!

• How can I add hair lights to make of this new part of the image hair

  Basically, I do this, as a favor for my girlfriends Santa secret where I shopped picture the face of the person in this picture of Mary Berry and Paul Hollywood. The problem I have is the hair that I had put on it seem natural because I don't know how to add light effects to make it look as if its on the same angle as the rest of the photo.

  I just started using Photoshop for the first time a few months ago so I'm a complete novice, so any help with this would be greatly appreciated, I'm sure that the light of the sun comes from the top of the left side.

  

  Hey anubis,

  Please see the tutorial below that is associated with the same.

  http://www.photoshopessentials.com/photo-editing/hair-color/

  10Steps.SG - Photoshop tutorials and resources

  Change hair color in Photoshop

  Hope that helps.

  Kind regards

  ~ Mohit

• Extreme wispy hair extraction

  I use CS6 software app...

  A picture of my granddaughter involves an old great-granddaughter of 2 years sitting on the stairs (inside)...

  2 + hours of cutting-edge hair out presented by Martin, Howard, Deke, Aaron, Jesus, others; nothing comes close to my problem ...

  The vast majority of video tutorials shown to improve from simple outline of a single color...

  Please provide a detailed, multicolored hair extraction, landing page, I can watch and learn?

  Thank you...

  Marvin

  Make a great extraction to a strong contrast between the hair and the background of origin. If you don't see this, you must find a way. Often as a copy of one color channel is a good starting point.   Do not start using hand tools like brushes have right tools Photoshop do as much work as they can do. Use refine edges, filters and as levels adjustment tools.  Background replacement which match a little to the original and the mixture can help.   If the original background is white or nearly merge multiply can bring back these hairs that MissTake refers to. However when there is no good contrast, you need to rig the extraction. You must enter as artist in you and paint your Mona Lisa...