Hang & restart problems after Vista updated August 11, 2010

Similar Questions

• Problem with Vista update 02/02/2010

  Looking for help, installed windows update this week and after a reboot vista wouldn't start, just a screen empty. Started in safe mode, did a scan, found nothing. Restore system before the update 01/02/2010, problem solved, but now I'm afraid to update. Any ideas? Thank you.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Access to licensed products (obtained previously by Norton 360) off after Vista updated 28/04/11

  Norton 360 expires after Vista updated 28/04/11 - now no security, etc., no access to Windows Update or downloader virus checker... or any software under license, for example. MS Office... Suppose that this was caused by one of the shipped Microsoft updates that day but can't really many on laptop except game provided (no need to license) do games.

  Anyone any ideas and guidelines to follow to allow to return to the previous one (pre 28/04/11) Vista service in this situation?

  See the (my) response in this thread as a reference message: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  Pay special attention to what follows in this post:

  
  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Satellite A200 restarts continuously after Windows update

  Hey all,.

  The model Satellite A200 - 1 GB (PSAE6E) worked perfectly for two years now (with Vista 32-bit).
  Since running windows update yesterday and restart, the laptop summer stuck in a reboot loop, restart immediately after the 'POST' (the Toshiba logo, etc) screen with a flash of blue screen.
  Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B)...
  Try to restore to a point before the blackout failed for an unknown reason (gave an error).
  Search in Google gave a possible cause - maybe the hard disk driver was changed by an incompatible type. There were some suggestions to turn off the AHCI in the bios, but it doesn't have this option.
  The bios was not updated since purchase (this is version 1.4), but I can't update because it seems that the only update provided by Toshiba requires windows.

  Someone has any idea how to fix the computer without having to reinstall windows? No matter what?

  Thanks in advance,
  Ofir

  Hello

  I doubt that it could be a hardware error (my personal opinion) but nothing is impossible, that you know
  The fact is that a BSOD can be caused by hardware error, but also a serious software problem
  In my opinion, something went wrong during the update

  If you are not able to boot the operating system even by using a safe mode then a new install of the OS would be the last chance to get this sort problem

  I think you should try a new installation to see if this could be a hardware problem because there is a small remnant of risk that this could be a hardware problem

• Satellite A300 starts after Vista update

  Hello everyone!

  I had a problem with my Satellite A300. After installing Vista updates laptop is restart automatically, so it is not commissioning and screan is black, but buttons is the lighting, the cooler works.

  You have a solution to this problem?

  Hello

  Remove the battery, disconnect the adapter and wait for about 30 minutes.
  Then reconnect both parties and try to turn on the laptop.

  Check it out!

• Microsoft Word no longer works after Vista update

  Hello

  MS Word has stopped working immediately after Windows Vista updates automatic.

  When I try to run Word, it opens, but I can't perform tasks of hormaux in the document and when I try to close (or save) I get the message "Microsoft Word has stopped working".  The system diagnostics are unable to solve the problem.

  I have a Dell Inspiron 1525. 32-bit operating system.   Windows Vista Edition Home Premium.

  Thank you
  Dora

  Hi Aldous and others

  I have the same problem and resolved to mark a change in the registry as indicated in this article, http://support.microsoft.com/kb/921541/en-us

  I restart and open and reopen and it works fine so far.

  Hope it help you too.

  Best chance

  Kenneth

  Sorry for the bad spelling :-(

• Loop of startup repair after vista update on 15-04-09

  .post a {text-decoration: underline ;}}

  Hello

  I hope someone here can help me.  I tried Googling for solutions, but after having tried everything without success, I'm bringing my problem here.

  I had gone through the internet when the program to close unexpectedly.   After trying to restart my laptop Dell 1720 (Windows Vista Home Premium), I went to bed after seeing the stage 2/3 update on the screen. It shows, in the morning, he can not start and gives me the ability to startup repair. After that, it is said that it cannot repair this computer automatically. Details of the problem are the following:
  Startup Repair V2
  AutoFailover
  6.0.6000.16386.6.0.6001.18000
  Bad driver
  WrpRepair

  I tried to restore to previous restore points (all tell me there's a missing file, error code 0 x 80070002), safe mode, last known good configuration and I end up in the same loop of startup repair. I have not installed recent programs, drivers and devices.  I am depressed and want to avoid going back to a factory installation since I've had this laptop for a year and have a ton of files and programs.  Anyone with any suggestions would be greatly appreciated.

  ETA: I also run chkdsk (no errors found) and sfc/scannow (Windows Resource Protection cannot run task or something like that).

  In fact, my problem has been able to start Windows Vista after the last update (14/04/09) install.  The error code came when I tried to restore my system to my restore points.  Finally I ended up taking my hd to access my data.  Then I tried to reinstall Vista from Dell provided and had problems reinstall drive to do so (hung up END INSTALLATION).  A call to Dell support had me change some of my BIOS settings and finally managed to get Vista installed.  Now, I'm in the painful process of restoring all my programs and personal data.  This time, I created a partition for the operating system and a separate for all my photos, music, etc. so I don't have this problem of losing all my data the next time the fact once again Vista (and it will be!  I already lived 2 BSOD since reinstalling 2 days ago!)  So, there was no solution to my original post.  Good luck to everyone else who has the same problem with the Vista updates.

• The House 64 - not IE after Vista update?

  Vista Home 64:. No Internet after the update of the victory.

  Can access the files on the local network with successful Ping router, hosts, Google, MS, & etc., but NOT IE connectivity.

  The weird part: Diagnostics reports Net "found no no problem." Network & sharing shows the active connection and activity; Attempts to Setup new connection lead, "You are already connected to the Internet." Yes, I hope so.  Removed/disabled firewall, Defender, etc., then restarted.

  Background: HP s3620f. Worked fine just before update. Now LAN & WLAN show 'Connected', but the No. IE functionality.

  Tried to Uninstal/reinstall LAN/WLAN via the Device Manager - no effect. I tried to Restore Points; Tried to uninstall IE9, IE8.

  I can't be the only one... Viewed items, bases of knowledge, cats...

  The souls of all kinds & knowledgable have advice?

  Hi M.Yoshinaga,

  See the following article to resolve problems with Internet Explorer:

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  See also:

  The problems of Internet connection

  Network connection problems

  In Windows network connection issues

• Problem with Vista update - 'Realtek RT8168... "killed my internet connection

  As part of my routine that Vista updates, I've updated "Realtek RT8168B/8111 Family."... »

  After the restart, I had no internet connectivity.

  The problem was "Realtek RT8168B/8111 Family PCI - E Gigabit Ethernet NIC problems hardware or driver.

  I followed the suggestions for updating drivers & system told me that my drivers were OK

  I am really at a loss

  Intel core i7, vista 64-bit, the card mother Gigabyte GA-EX58-UD5

  Hello

  The problem is that this update was probably older than you had installed. Use the system restore
  and after restart go in Windows updates - updates available - just right-click on it and HIDE. Best
  to never use the driver updated in Windows Updates - manually look.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===========================================

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT

  RTL8168B - it's later pilot and newer that you have (and this bad update)
  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=5&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false#RTL8111B/RTL8168B/RTL8111/RTL8168
  RTL8111C/RTL8111CP/RTL8111D (L)
  RTL8168C/RTL8111DP/RTL8111E
  RTL8105E

  --------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem installation Vista updated and now the Vista operating system unbootable - help

  Here it is the description of what has past.  Ive been through everything I can do and am now stuck with a code of 0 X 4001100200001005.

  I worked with Microsoft Vista forum group of answers, but I'm not back upward and running if Im going back to HP for assistance.  I hope that we can achieve together.  This all started when started Vista updates failing.  I got the 1 3 install stuck on the 2nd about three weeks ago.

  Here is a list of what I've done so far
  I have an old HP DV9410us for a year which will not restart after installing updates.  It comes to configuring updates step 1 from 3 to about 98% and then stops.

  It then says unable to start windows and start the repair program windows for about 5-10 minutes.  He said that you want to use the system restore.  I tell Yah Why Not.  Then, it will stop and start the cycle.

  The error in the Startup Repair States the following

  After a bunch of tests successful

  Root cause found:

  c:\ntoskrnl.exe is corrupted.

  Repari Action: Repair of files
  Result: failed.  Error code = 0xa
  Duration 6521ms

  Action repair system restore
  Result: Completed successfully

  He then returns to the cycle all over again.

  I turned the clock to October with F10 at startup but that did nothing.

  I checked the hard drive for the short and complete and checked everything.

  I dug my recovery disks I did ago about 10 months after I bought and used to return to the top of my hardrive.  I was all ready for a MAC at this point.

  I went back to the HP Recovery program and tried to restore an earlier version of a well-known operating system.  The Manager of recovery disk wont work so I used the Recovery Manager disk.  There is no old configs to this true its in step 2.

  I'm now trying to perform a factory image recovery.
  Reload the operating system.  It started and got to 13% after 20 minutes and gave me the following error code.

  During this process, I have an error that had the code 0 x 4001100200001005.

  It is the reformatting of repeat of the Windows Partition.

  Is this a Vista update problem?  Have you seen this before?

  I'm doing a factory restore and will let you know if this operation fails.  I just wanted to get this thread started.

  I really appreciate this forum and any help you could give me.

  Message edited by ftrnow on 12/30/2008 08:17

  If you had an error in "configuration update 1 3-3 3 ' which would be a problem with windows update.

  to fix this, you'll need a factory image recovery if you can not access other modes for windows. But youy mentioned that you had a 0xx000x... (similar to code) error... try checking the hard drive and memory modules health... threr could be a problem with these devices, you can access it through the bios settings (turning on laptop, the moment you see hp invent screen, press f10) go to the diagnostics section, run the memory test and that hard drive test

  very probably with the error you have, you might have a hard drive problem.

  most of my clients (I am a specialist of the laptop of beak) with that problem and stuck on a boot loop or may not switch from windows, 95% of them had a hard drive failure.