Hangs for a long time in loading Web sites...?

Similar Questions

• Mac Pro book takes a lot of time to load Web sites

  MY Mac Book Pro purchased last Aperil began to take a while to load Web pages. Photos and videos on the pages add all the time.

  The computer is a MacBook Pro, retina, 15 inch, mid-2014. 2.5ghz Intel core 17.

  16GB 1600 MHz DDR3 memory

  Mail and all other functions work fine.

  My wife MacBook works fine.

  Any ideas?

  Go step by step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  6. remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Close the Finder window.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

• Windows Explorer hangs for a long time after the installation of the latest updates from Microsoft

  Hello!

  Yesterday, I downloaded and installed the latest Windows updates on the Web from Microsoft by using Windows Update.

  After that, I see a strange thing from time to time.

  Sometimes when I open Windows Explorer or on a list of logical drives reader app, the hangs of the application for 10-15 minutes (not answer).

  While it hangs, other applications can function normally if they don't read the list of drives, for example, I can use Internet Explorer at the same time.

  The appearance of the problem is unpredictable, it can happen after 10 to 20 minutes of work after the reboot, or even after 1-2 hours of labor.

  My OS is Vista Home Premium x 64, laptop Pavilion dv7 - 1157 cl.

  At the moment I don't have any antivirus software or third party drivers (I configured factory drivers only).

  Event log Windows contains no error messages, all devices are displayed in device in the form of work normally without errors management.

  I ran the test of memory with the memory diagnostic tool, it found no errors.

  Here is the list of the installed Windows updates.

  Do you have any suggestions? There may be a problem already known with some updates?

  Message edited by Gleb on 14/05/2009 08:38

  I'm surprised, there is no answer at all.

  Well, the problem has been successfully resolved by installing Vista SP2 RTM. My test program has been run 20 hours and showed no delay.

• .psb file will record not - 'save 0% ' hangs for a LONG time.

  With the help of Adobe Photoshop CC 2014. System dual 6-core xeon running Windows 7 Ultimate x 64. 32 GB of RAM, SSD boot drive and scratch disk SSD, with my project files on an internal 3 TB 7200 RPM drive.

  I have a pretty large .psb (16 bit, 12, 000px wide, embedded linked smart objects and a few small smart objects, which are 32-bit). It contains also some vector layers and many effects of layer. It is pretty well optimized. 32-bit layers are linked external files and the vectors have been used to help reduce the size of the file.

  Last night, immediately after a reboot, I put to save and it took some time, I went in the House and ended up falling asleep on the couch. This morning, it's always 0%. I was able to cancel the registration without problem and optimize the file (it got up to 4.5 GB), but it will not save or save as.

  I am able to cancel the registration without problem. This happens to any drive I save in. All my drives are less than half full, it is a brand new machine that works REALLY well in all other cases (first/Maya).

  What are my options here? I have about an hour and a half of work I'm going to lose to I don't get to save this thing. It's a bad - I have a schedule tight.

  EDIT: I just create a new canvas and dragged manually each layer/folder one at a time for the new document of the former. This one won't save either - it just sits at 0%. It tells me that the problem is with the layers somewhere (or the inability of Photoshop to save).

  Help!

  When you work on a file, Photoshop saves history States and much else that I forgot in memory which can be take a lot of your ram and slow things down. Effectiveness of reading in the lower status bar would give you an idea.

  So have you tried Edit > Purge to clear everything out before the backup?

  Gene

• I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

  I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

  Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

  This user tip can help: when to charge your iPhone or iPad

• Pages take a long time to load in versions 6,7 and 8, version 5 works fine.

  Version 5 works fine, when I updated to 6.7, and now 8, pages take a long time to load. It's on 2 different computers, one with Vista, Windows 7 other. If I restart Firefox it helps, but the problem comes back. Does not happen with IE or Opera.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• emoticons take a long time to load

  Hello yall

  then I had a problem with my phone here

  whenever I message someone and I want to send emoticons, emoji bar any load for a long time. and then when it finishes loading and I actually managed to send messages, once more begins loading. and when I get back to the regular keyboard (not the one emoji) it once again loads for a long time.

  now, it is true embarrassing cause all I try to have a conversation with a large number of emoticons, but this does not seem worked.

  I tried to restart and reset even, and then use my backup...

  I don't know what to do and I would really appreciate your help if you know an answer that could help.

  Thank you very much

  1. Reset the keyboard dictionary: settings > General > reset > reset the keyboard dictionary
  2. Restore factory settings and do not use your backup.

  -AJ

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• Windows 7 takes a long time to load the desktop after login

  Hello

  I am using windows 7 on my HP 530 laptop. My friend who installed and activated, but I think that it has installed the cracked version. After installation, it was really perfect. but after a while when I connected to the internet, some updates have been installed, and then when I logged in the windows, he invites me that you are using a pirated version or something like that (I don't know more actually). then I restored to my previous state and then everything was fine. After that I stopped the automatic updates, but these days my startup window is having a few problems. After entering the password, its taking a long time to load the office and its keep on the list "loading, please wait...". »

  I'm so sick of that, also, I have to restart my laptop by pressing the power button, and after the reboot, it works fine. But I need someone to answerwhy its taking a long time to load the desktop...?

  Also, please give me some advice to solve this problem, keep this idea in mind that my computer is virus free and got a good processor and RAM. I installed my windows in the C drive, and in my C drive only almost 2 GB of space is left (or almost). and there is no program running auto in msconfig, other than gtalk, Skype, etc.

  I'll be really grateful if someone please give me the solution.

  HP would have provided your preinstalled laptop with win, they would also have provided a way to recover your laptop to the specifications of the factory, either through discs of recovery or a hidden restore partition that you need to access in order to make recovery disks. How do you access a recovery partition is an option of HP, is not dealing with a MS - visit the HP website, specific to your model for more details on how.

  If an illegal win7 version has been installed, or you have to buy version of win7 you need, or you need to recover your laptop provided that the factory provided, by doing so, you lose everything on the phone, if you have lost or that you can not do the restore cd and then telephone HP support they would usually provide records for a small fee.

• When you surface you sales to Singapore and when can I buy surface to Singapore? I already waited for a long time

  RESTful salvation, surface was already on sale in the United States, China and some countries, but it is not on sale in Singapore. When you surface you sales to Singapore and when can I buy surface to Singapore? I already waited for a long time

  Hello

  Thanks for posting the question in the Microsoft Community! If I understand correctly you want to buy Surface to Singapore.

  Unfortunately, Surface is not available in this area right now. I suggest you check out the link for the Microsoft Singapore Web site for updates:

  http://www.Microsoft.com/en-SG/default.aspx

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  Thank you.

• Still burned DVD takes a long time to load into the reader

  I created a DVD in Encore CS3.  The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3.  I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs.   The DVD works fine but takes a long time to load in one of my DVD players.

  A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu.  Each time is different.

  (This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)

  In another Sony player my DVD on average about 25 seconds

  A Panasonic player, it takes about 15 seconds

  In a portable player from JVC, it takes about 8 seconds.

  That is what it is?  This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.

  Help, please

  Thank you

  EDM

  EDM,

  One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.

  Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.

  What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.

  How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.

  As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.

  Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.

  Good luck

  Hunt

• blocking connection for a long time

  Hi Hussein.
  
  EBS 11.5.10.2
  AIX 5L OPERATING SYSTEM
  
  I don't know what that happens to our instance of prod now :(
  I connect to the URL of windows and EBS login page displayed. But when I enter the name of USER and password
  e.g. SYSADMIN / sysadmin.. .the connection suspended for a long time. Where can I find the log to check ang troubleshoot it?
  
  
  Thank you very much

  Hello

  I'm really confused now, I don't know which caused the system to hang. In fact, I met before.
  This all started when I installed a 2nd instance.

  Please check that apache log file and the database log file.

  But I noticed that the PROD instance was affected, it crashes often now, I don't know if it has been affected by the
  adding group 'dba' which is not his group.

  The second installation should not affect the instacne which is already running.

  My question is, is it OK to run rapidwiz two times? to create the instance of PROD and DEV instance? instead of cloning.

  Yes, it is possible, but the two instances will not the same.

  Kind regards
  Hussein

• Please can someone help me for a long time out of the payment itun

  Please can someone help me for a long time out of the payment of itun, I lost my phone.

  This is my information

  ****

  ****

  Thank you

  < personal information under the direction of the host >

  OK so tell me first your reason! It of your personal account, why do you give?