Hard drive easily gets full

Similar Questions

• Hello.. my hard drive C is full, how do I get it clean?

  Original title: hard drive
  Hello.. my hard drive C is full, how do I get it clean?

  Uninstall / remove things you don't need.

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• My files on the hard drive are getting corrupted?

  I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.

  Is someone can you please tell me what is happening with my hard drive?

  Thanks in advance...

  Is someone can you please tell me what is happening with my hard drive?

  Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.

  As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.

  You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.

• When I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Original title: Ox8000700020

  Hi, when I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Double post: http://answers.microsoft.com/en-us/windows/forum/windows_other-performance/ox8000700020/3c708968-5d37-40dc-97ef-2a44b72ca5fc

  I have merged the new post with the original question.

  -steve

• "When I try to listen to music from my external hard drive, I get ' E: / Server execution failed"

  Original title: external Hard Drive music does not play

  When I try to listen to music from my external hard drive, I get ' E: / failure of execution of the server "what's?

  Hello
   
  (1) is specific to a specific folder?
  (2) did you of recent changes to the computer before the show?
  (3) what music player do you use?
   
  "E: / Server execution failed" is an error caused by a person who uses the incorrect proxy settings in windows, and windows media player and media center you will encounter errors on this.
   
  I suggest the following methods and check if it helps.
   
  Method 1:
  (a) open the network and sharing Center
  (b) go to network connections
  c) right click of your main connection method and click IPV4 settings
  (d) select Advanced settings, click on that and if you see any information other that automatically detect settings and then delete and check her automatically detect the settings box.
   
  Method 2: I suggest to refer to the following article and perform the steps mentioned by Vivian Xing and check if it helps. http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/f690ff23-C486-47e7-ACD4-ee6187613ae8

  Warning to be upgraded on the spot: take the backup of all your files of important data before performing the upgrade on the spot.

• I've got 4 Lightroom and my hard drive is too full with photos I have in lightroom. I want to move a lot to a USB key and remove them from lightroom. What are the steps to do this please?

  I've got 4 Lightroom and my hard drive is too full with photos I have in lightroom. I want to move a lot to a USB key and remove them from lightroom. What are the steps to do this please?

  I have some listed here videos that will help you with this

  Organization of Lightroom - Lightroom and Photoshop training

  Dave

• After changing hard drives, I get an error message that says: I need a full version disc windows genuine

  Original title: replacement hard drive configuration issue

  My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?

  Thank you

  Jeff

  Hello

  Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:

  http://support.Microsoft.com/kb/950929

  See also: http://support.microsoft.com/kb/811224

• I have a HDD with Win 7, but plan on building a new PC. Is there a way to use this HARD drive to get an upgrade, or do I need a new OEM?

  I am trying to decide between getting Zorin OS or Windows 8, but it feels like a bit of a RIP-OFF than a duty pay $70 more for the System Builder version.  If I transfer this hard drive to a new computer, would I be able to use the upgrade?  Is to use an upgrade from the old Windows 7 PC to a new one without OS anyway?

  I am trying to decide between getting Zorin OS or Windows 8, but it feels like a bit of a RIP-OFF than a duty pay $70 more for the System Builder version.  If I transfer this hard drive to a new computer, would I be able to use the upgrade?  Is to use an upgrade from the old Windows 7 PC to a new one without OS anyway?

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You will need to invest in a new license, as Windows 8 OEM System Builder License shall exercise the rights of transfer, its quite a good deal.

  There is no full retail version of Windows 8. If you need a full version, you will need to purchase the Pro OEM Windows 8 of new eggs. To do this, install an own custom.

  Windows 8 Pro
  64-bit (OEM)

  Windows 8 Pro
  32-bit (OEM)

  Windows 8
  64-bit (OEM)

  Windows 8
  32-bit (OEM)

• How to add 2nd hard drive; first is full

  5.7 LR used on an iMac with a catalog and images at this point on a single external hard drive.

  Now that the drive is close to full so a second drive ready to go.

  I need advice on how to proceed. I think my options would be:

  1. continue with the same catalog but speaking to 2 hard drives (possible or not?) The rest catalog where it is on Drive 1 or move it to the new Drive 2?

  2. create the catalog on the new hard drive where the new and future pictures are stored. In this case, when I want to see/manipulate the older images, I have to open the older catalog, I guess, and there is no way to have all the images of these two albums "visible" or accessible at the same time.

  I hope that I've explained this well enough. Appreciate any advice, thanks.

  Well your post on the space available on disk 1 is revealing. You have simply not enough space on disk 1 to copy whatever it is him. This includes new writing entries in the LR catalog file. you need to move things off disc 1. Do not move images unless you do only from Lightroom.

  But there are probably tons of things on disc 1 that can easily and safely, move to the new drive or even removed completely.

  Never fill a disc. Always allow free to at least 10-20%.

• Hard drive MacBook Air full when using only iclouddrive

  Can anyone help please.  I'm sure that its very simple.  I have a Macbook Air and create books for children.  I saved all the files on my iclouddrive account, thinking that I don't use space on my hard drive!  However, my hard drive is now complete.  I thought by storing all my files on the cloud, the hard drive of my computer would be pretty empty, after all this is why I bought a Macbook Air!  I asked for support to an apple store and they said that some Macbook Air have a bug that duplicates files and I need to check the files are uploaded on my drive to iCloud and then re - install the OS on my MBAir to get rid of the bug

  3 questions: it will work.  Y at - it a simpler way and he will wipe away the files on iCloud drive at the same time or they will be safe until I have access again to my newly cleaned MBAir?

  help most appreciated.

  Badger

  If you have the Apple menu > System Preferences > iCloud > iCloud drive turned on, then all files that you have stored in iCloud drive to https://www.icloud.com/ will have a local copy on your Mac. It's not a bug, this is how it is designed to work. iCloud Drive is mainly designed for the synchronization of data between devices and is not intended as a storage cloud solution only.

• Newly installed hard drive, cannot get the reinstallation of Windows 7 to the end

  Hi all. My factory-issued Seagate 1 TB hard drive of origin provided with my PC Pavilion Elite HPE-240f failed a few months ago and I finally had time to fixation (rock a Pavilion dm4 laptop in the meantime, I'm not in a huge rush). I replaced it tonight with a Western Digital Blue 1 TB hard drive, which I know is Advanced Format.

  I love HP platform minor changes in the the Windows 7 OS, I went ahead and tried to reinstall the OS of my recovery disks that I made when I got this PC. I checked the BIOS settings and the new hard drive WD IS recognized, the size is correct, etc. It has been configured in RAID with the SATA controller, and I tried to put out when the installation of the operating system initially lacked AHCI. It seems to be stuck in some kind of loop in the final configuration step, and I get out of the dialog box "Installation of Windows set up Windows to run on a hardware on this computer" could not. Hit Okay sends in reboot and after that I get a "Windows is unable to complete the installation. To install Windows on this computer, restart the installation"notice.

  It makes me batty, and I really want my back office. This is a great machine, and as much as I love my laptop, it can't handle heavy programs like Photoshop or my multitasking fool. I managed to get the OS installed by forcing the system to bypass its system predefined through registry commands, but the important things were wrong, as Windows Update does not work, so I'll try to reset all with only recovery disks. So far, no go. I am extremely tired, frustrated, and it's late, so apologies for what I've left out or of typos. Any help on how to solve this problem is GREATLY appreciated.

  Thank you very much for your response, @MechPilot. I actually found what I thought, it's perhaps the question a day or two before your answer: my computer was manufactured and purchased just before October 2010, which has been cut for restoration placed disks shaped for the drives non - Advanced Format. All the following which has been reformatted accordingly. I contacted HP and bought the replacement of the recovery discs (made in 2012), that I received yesterday. After several hours of nerves and finger-crossing, it worked like a charm. The operating system has successfully recovered, and I couldn't be happier!

  I answer computer said of office right now, in fact! Thanks again.

• H9 want - 1469ea Phoenix: CSO part of hard drive 0 indicates full - E Drive a 2.7 TB unused.

  I'm a H9-1469ea Phoenix office less than 2 years. The OSC Drive (referred to as disk 0) with 106 GB is full of programs etc and cause serious problems. The rest of the car O contains recovery (drive D), and I'm unable to increase the volume of the part of the OSC. The D drive on disk 1 has more than 2.7 TB of unused space (I keep all data on a spare drive - not the computer), but I am unable to repartition to use this space as the C for programs, etc. How can I increase the size of drive E (Datadrive) using a portion of unused space in drive E greater than 2.7 to.

  Serial number is [removed personal information]

  Hi again rgh1,

  It is good to hear from you!

  The reason why your particular computer was equipped with a smaller than the hard disk drive is for quick loading and processing of the operating system. As the disc is an SSD means that the start-up will be generally faster than a typical hard drive!

  To keep your system works effectively, without overloading the drive 0, you can use your E drive for storage of files, applications and games. For example, you can reinstall Steam on your computer hard disk of 2.7 TB. This can be done by navigating to a different destination folder on the E drive. For more information, you can also take a look at this document on install games in different places.

  I hope this helps, and if you need further assistance, I would be very happy to give him!

  Have a great rest of your day!

• HARD drive caddy gets stuck into the Ultrabay slot. T510.

  I bought myself a caddy of SATA hard drive on ebay (Yes, a knockoff of one) and put it in the ultrabay with an SSD inside housing (the plan was to clone my current drive for the SSD and then put the SSD into the slot of the readers later). The caddy went fine, but now it just won't come out. I push the release switch and try to push the second switch upward, but it is completely stuck in there...

  My first plan was to remove the keyboard and just take a look to see if there's anything obviously wrong. This plan was stopped when one of the screws holding the keyboard in place was too tight, and they are really small screws. I didn't try not more scared to round the screw head.

  If at this point, I'm probably going to have to send walking back to Lenovo and ask them to disassemble the laptop to get that thing. Until I do that, someone has ideas or ideas on what could be done?

  
  

• Back up and Restore Center - unable to save external hard drive Iomega - get code error 0 x 800700022

  Hello
  I used my external hard drive (Iomega) once, about 8 months ago to save the files on m y HP laptop.  I tried these last days to support again (I know, I should have backed up regularly!), but whenever I try, I get the message that I get an error code 0 x 800700022

  I have Windows Vista on my laptop. I don't know what you need to know. The hard drive will allow me to recover the files that I have already backed up to it, I can just put more on it.

  I hope someone can help me, thanks!

  Kristy

  Hi Kristy,

  1. have you as any message with the error code?

  Step 1:

  I suggest that you follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/kb/951002/en-us

  Step 2:

  Check your disk for errors.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/bff71aac-c78e-42bd-a959-116019c93478

  THIRD PARTY LINK WARNING

  WARNING: Microsoft does not provide any assurance or warranty, implied or otherwise, and is not responsible for the download, you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.