HARD drive caddy gets stuck into the Ultrabay slot. T510.

Similar Questions

• HARD drive 2 TB - stuck to the size of the LUN 256 GB

  I'm unable to untilize the free space on a 2 TB HARD drive. I am told is 1.81 TB free space but I'm going to create a data store, I thought that the maximum size is 256 GB. Also, when I try to increase it, it tells me that the value is greater than the capacity of the disc (which contradicts the previous readings).

  Screenshots:

  http://img694.imageshack.us/img694/4851/FreeSpace.PNG

  http://img851.imageshack.us/img851/709/MaxSpace.PNG

  http://img714.imageshack.us/img714/5878/customspace.PNG

  Here is the result complete fdisk:

  ~ # fdisk-l
  
  Disk/dev/disks/t10. ATA___Hitachi_HDS723020BLA642___MN1220F3275YED: 2000,3 GB, 2000398934016 bytes
  255 heads, 63 sectors/track, 243201 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes
  
  Device boot start end blocks Id system
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN1220F3275YEDp1 1 243201 1953511008 + fb VMFS
  
  Disk/dev/disks/t10. ATA___Hitachi_HDS723020BLA642___MN1220F3275XVD: 2000,3 GB, 2000398934016 bytes
  255 heads, 63 sectors/track, 243201 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes
  
  Device boot start end blocks Id system
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN1220F3275XVDp1 1 243201 1953511008 + fb VMFS
  
  Disk/dev/disks/t10. ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3K: 2000,3 GB, 2000398934016 bytes
  Heads of 64, 32 sectors/track, 1907729 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
  Device boot start end blocks Id system
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp1 5 900 917504 5 extended
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp2 901 4995 4193280 6 FAT16
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp4 * 1 4 4080 4 FAT16 < 32M

  
  / dev/Disks/T10. 5 254 255984 6 FAT16 ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp5
  / dev/Disks/T10. 255 504 255984 6 FAT16 ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp6
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp7 505 614 112624 VMKcore fc
  / dev/Disks/T10. 615 900 292848 6 FAT16 ATA___Hitachi_HDS723020BLA642___MN5220F32ELD3Kp8
  
  Partition table entries are not in the order of disc
  
  Disk/dev/disks/t10. ATA___Hitachi_HDS723020BLA642___MN5220F32EGVEK: 2000,3 GB, 2000398934016 bytes
  255 heads, 63 sectors/track, 243201 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes
  
  Device boot start end blocks Id system
  / dev/Disks/T10. ATA___Hitachi_HDS723020BLA642___MN5220F32EGVEKp1 1 243201 1953511008 + fb VMFS

  The HARD disk that relates to this is the ESXI HDD: MN5220F32ELD3K, with the FAT16 partitions.

  Even when I try to use the LUN with 256 GB in size, I gives me an error: http://img543.imageshack.us/img543/6163/errorsq.PNG

  To me, it looks like the 3 partition - which should be the VMFS partition - has been deleted at some point!

  You can (at your own risk) follow http://kb.vmware.com/kb/1009829 and try to manually recreate the VMFS partition/data store on the system disk.

  André

• 2.5 "2 TB HDD - Fit into the Ultrabay slot?

  2.5 "HDD - series Western Digital Green 2 TB
  I was contemplating putting one of them in my housing ultrabay.
  It fit?

  N ° it is too thick. It is 15mm and you need to 9.5 mm

• Satellite Pro C50 - A - 1 K 9 - use of the HARD Drive Caddy

  Hello

  When I got my new laptop the first think I did was to install an SSD.

  I don't usually use my optical Bay so I am planning to install a HARD drive enclosure.
  Someone has already done this, and if so have you had any problems? Also, what are data transfer speeds?

  Thank you

  Fraser

  I can't tell you if this extra HARD drive caddy will work in the Satellite Pro C50 series STRANGE Bay - A - 1 K 9 because that depends on the support of the BIOS and the controller.

  I read about these updates several times in different forums and to be stone, sometimes it is possible, but in many cases, the BIOS does not recognize this drive caddy HARD and laptop does not start.

  In the case where you have already tried these updates, please share the details with us!
  I think it would be very interesting for others, if this update worked correctly.

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Install the hard drive in the ultrabay slot Gets the benefits of the active protection system?

  Hi all

  I have a 500 GB 7200 RPM hard drive I bought Lenovo and a hard drive caddy that is the thin (so there is a slight gap for those who are curious) on the thinkpad t510. what I was wondering is I dualboot on it (linux on the 500 GB) and I'm wondering if when I use windows, is the second hdd always get protected against shocks and other potentially dangerous damage of active protection system which is present for the hard disk which is preinstalled on your laptop

  Based on marketing materials, it seems that the UltraBay has this feature as well.

  http://www.PC.IBM.com/us/think/thinkvantagetech/APS.html

• When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  Hello

  Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
  drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
  at 4 GB.

  Overview of FAT, HPFS, and NTFS file systems
  http://support.Microsoft.com/kb/100108

  How to go beyond the limit of 4 GB on FAT32
  http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

  -------------------------------------------------------------------------------------------------------------------------

  The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

  Zip and Split - free
  http://zipandsplit.toolazy.me.UK/

  Split and Zip - free
  http://www.jtoolgame.com/tools/splitzip.html

  Akhir Split Zip - free
  http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My files on the hard drive are getting corrupted?

  I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.

  Is someone can you please tell me what is happening with my hard drive?

  Thanks in advance...

  Is someone can you please tell me what is happening with my hard drive?

  Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.

  As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.

  You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.

• After the last mandatory update, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  After the last mandatory update to Vista, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  Please fix this.

  Hi Mikepolifka,

  ؠ What updates did you install on your computer?

  Try SafeMode as the first step.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. If a program recently installed, device, or driver prevents Windows from running correctly, you can start your computer in safe mode, and then remove the program that is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can also perform a restore of the system on your computer and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If it works fine after system restore you may have to manually install updates one and check the status.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

  Hi Zling,

  It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Sometimes, the Lenovo Y40 gets stuck on the Lenovo screen?

  The Y40 I bought in July sometimes gets stuck on the Lenovo screen where the laoding circle does not appear. It happens only intermittently, but occurs more often after long use (more than 45 minutes). Technical support already tells me to reset the BIOS and restore windows. Do you know the guys from any thing that can cause this problem? Would it be a HARD drive broken or damaged OS? Thank you!

  I've already sent my laptop in for repair. The technical support representative said that it was either a HARD drive or motherboard problem

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• Need of replacement (main Bay) R61 hard drive Caddy

  As the subject says, I need a caddy of replacement for the hard drive HARD drive home and I can't seem to find a place known to get one of the ships in the Canada. Any help would be appreciated, thanks.

  do you mean that you can find them on ebay http://www.ebay.com/itm/Hard-Drive-Caddy-Rails-IBM-Thinkpad-T60-T60p-T61-TJ18A-/220806819412?pt=PCC _...

  

• Everything I print gets stuck in the queue, but the document is printed

  ORIGINAL TITLE: Spooler

  I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but perisisted of the question, given that the document gets stuck, no other agency will be able to print, remove the paper and print again to print but the file gets stuck again on the queue. I tried to change the IP address, but the same thing happened. Can someone help me?

  Hi, Omorguz,

  Printer brand and model, if you please.

  Start > run > type services.msc

  Press enter

  Scroll down to print spooler

  Select stop

  Let Windows stop the spooler

  Control Panel > printers and Faxes folder

  Right-click on the printer icon, then select open

  If you see pending orders in the queue, select the

  Click file > cancel all Documents

  If a job shows the deletion, but never finished, open the command prompt window

  Start > run > type cmd

  Press Ok

  Enter Net Stop Spooler

  Press enter

  Wait for the DOS window opens and is

  Open the command prompt window

  Type Net Start Spooler

  Press enter

  If that does not cancel the print job:

  Your directory of spools Windows XP is located at

  C:\WINDOWS\SYSTEM32\SPOOL\PRINTERS

  It will usually contain files like these:

  FP00008
  FP00008. SHD

  There are two files for each remaining print job.  Just delete these and restart the computer.  Your queue should now be provisioned.

  If you are printing over a network, and the queue is not clear after the above steps:

  Go to the computer that has the shared printer connected and perform steps 1 & 2 above.

  If this does not work, then go to the computer when he was sent to the printing of the task and perform the steps 1 & 2 on this computer.

  Run chkdsk

  Start > run > type CMD

  Press Ok

  Type C: chkdsk/r/f

  Press enter

  You will receive a message re: volume must be locked and you want to start scanning reboot?  Press y and press enter

  Type Exit to close the CMD window

  Restart the computer for the scan at startup

  This will check the integrity of your data on the hard drive of computer as well as find and fix errors that could corrupt your data or program files.

  I even recommend that you uninstall the printer and when you are done uninstalling, restart computer.

  When you reinstall the printer, reinstall it using the compatibility mode

  How to install a hardware device using the compatibility mode driver.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  It works on Windows 7 Professional, comprehensive and business - Windows XP Mode - it's free

  It's the best of both worlds: the new Windows XP Mode allows you to run Windows XP older right on your Windows 7 desktop business software.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  e FAQ or choose a link from the top of this page.