Hard drive error code 0142

Similar Questions

• 303 hard drive error code, how to replace

  I have run diagnostics from the system on my laptop and learned that the hard drive has not give the error code 303.  It came preloaded with 7 Home Premium from Windows OA.  We do not have a backup image or installation disk.  The laptop is old and out of warranty of 2 years.

  Should what hard drive replacement options I look for?

  Also, what options I have to install Windows 7?

  News of the laptop:

  product: HP Pavilion g series

  s/n: [personal information deleted]

  p/n: LZ514EA #ABU

  Model: g6-1184sa

  Hello

  Firstly, regarding the disk HARD, your laptop is listed as coming with a 500 GB hard drive, but you can just as easily install a 750 GB HARD drive if you want a little more than space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive starts on Page 54 of your maintenance & Service Guide.

  Regarding the reinstallation of the operating system on the new drive, there are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.  The following link guess that you live in the United Kingdom.

  Order recovery HP. - UK discs.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Trying to access the hard drive - error code 0 x 80070005

  I'm trying to be able to access my hard drive in my network and when I try to access my drive I get this error code

  Hello

  Maybe this can help,

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/bda85413-231e-4b56-bd8f-cd84cf925d20/

  Jack MVP-networking. EZLAN.NET

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• hard drive error code

  My son has a laptop Inspiron 15 with a 500 GB SATA hard drive.   It's a little more of 2 years and is

  little used.

  Recently, it wouldn't boot into Windows.   I was able to run Dell built-in diagnostics and all tests passed,

  except for the hard drive.   Returned message says Error Code: 2000-0151; validation 19717; bad hard drive 3rd = status.

  Any ideas on this subject, other than replacing the hard drive?

  Thank you.

  dsmith8404

  Error code 2000-0151 refers to a failing hard drive / has failed, you will need to replace the hard drive with a new one.

  Bev.

• Hard drive error code 301

  Can I replace/recover my hard drive after receiving the error message "drive smart error 301"?  I have a PC laptop HP G72-253NR, product # LG583UA. I received the error message and now when I turn on my system it will start not and will be automatically forwarded to the Startup Repair. Then, I get the message "a hard drive problem prevents Windows to start."  This leads me to believe that my hard drive failed completely.  My laptop is no longer under warranty and I need a quick inexpensive fix. Help, please.

  Hello

  The Smart 301 error would indicate the drive is defective and must be replaced - which is also consistent with the startup error.

  Your laptop is considered to be coming with a 640 GB hard drive, but whereas there is little or no difference in the cost, you can just as easily install a 750 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Hard drive error (Code inside)

  I have a laptop Compaq Presario CQ62-225NR (running Windows 7, did not come with an installation disc) which froze during use and would begin not later upward; It just says: 'Windows loading files', then crashes on a blue background enough.  I did a test drive that comes up error id "PGFAMG - 55264 L-XD0036-60TL03" for hard disk 1.  If someone could identify the problem, it would be great.  Thank you.

  Hello

  A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  Replacing the hard drive is quite simple.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.

  As you do not your recovery discs, you can order a replacement set using the link below - using them to reinstall the operating system on the new HARD drive reinstall it also almost all software originally shipped with your laptop as well as re-create the recovery on the new disk Partition.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Hard drive error code failed: WHD20-Z1J

  I got a Hard Drive - WDC WD10JPVT-75A1YT0

  Failed: WHD20-Z1J

  What does this failure of the stress test?

  This system is almost certainly out of warranty - and you do not have a failed hard drive on your hands.  However, the seven beep code indicates a problem with the CPU or the motherboard separated from the wrong drive.

  The overheating problem is probably what destroyed the hard drive.  If you want to repair the system, you need a new, 2.5 "9.5 mm or more thin disc SATA laptop to replace the defective one.  You can also check how you installed the heatsink - you replaced the thermal pads when you did?  Otherwise, it could easily be the source of overheating that causes the system to stop.

  Replacing a hard drive makes sense - if there is more damage just the drive, it is likely that you will need a motherboard, which will cost enough to consider a replacement system, particularly given the age of it.

• Hard drive error, does not start.

  Computer does not start. I get this failure code:
  Rw1xtw-7ax87b-mfpv6k-619403
  
  Can't find any information on this subject, can someone shed some light on this subject for me?

  Hello

  It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

• hard drive error message 1

  Whenever I turn on my laptop, a message appears that there is a problem with my hard drive.  I have prees F2 to get the Diagnostics utility and run the hard drive test. When I do I get this message

  hard drive error

  Failure ID: 90 c 633-6am70r-mfgk0k - 60 c 203

  Product ID: c2n26ua #aba

  Hello

  Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Error code 0142

  I got up this morning and turned on my computer and I got an error Code 0142.  Error 2000-0142 MSg.  MSc unit 0 Drive Test failed.  79 status byte.  Can someone help me?  My computer was working fine yesterday when I turned it off.

  
  

• Satellite L350 - persistent master hard drive errors

  I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.

  My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
  If the hard drive is simply borked, format or not? And if yes, what is the next step?
  Could I restore windows on my drive hard slave and give up on the master?

  Thanks in advance.
  Mike

  Hey Buddy,

  Are you sure that all these problems related to the HARD drive at 100%? How did you check that?

  I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
  http://www.HitachiGST.com/support/downloads/#DFT

  This tool can check your HARD drive for bad sectors.

  If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.

  But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)

• Laptop HP 2000: hard drive error

  Hello
  I have upgraded to Windows 10 one a few days ago and then yesterday when I went to turn on my computer it says this.

  Hard drive error
  Please run the hard drive Test in the diagnostic system
  Hard disk 3 (3F1)

  I ran the test drive and that's what he said

  Smart check: PAST
  DST short: FAILURE

  Help, please!

  You will need to replace the hard drive. Update to Windows 10 had nothing to do with it. After the back if you want to help find a car and its installation and reinstallation of Windows. If your Windows 10 appeared as it is activated, you can do a clean reinstall of Windows 10.

• Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

  Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

  Hello

  ·        Since when are you facing this problem?

  ·        What are the fix and repair that you tried to solve this problem?

  ·        Outside this disk verification error, do you get any other error message?

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  ·        Click on continue or provide administrator credentials if prompted.

  ·        In the command prompt window, type the following text, and then press ENTER:

  ·        sfc/scannow

  ·        You should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  ·        % Of verification complete.

  ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

  a. click on start, then run.

  b. in open, type cmd, and then press ENTER.

  c. use one of the following procedures:

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  You can see the article mentioned below for assistance.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3:

  I suggest you to do a system restore. Follow the steps mentioned in the article below.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Hard drive error, but passes diagnostic

  I have a vostro 320 all in one computer. Yesterday he left initializing with a hard drive error, but when I run the hardware diagnostics all past. When I go into the installer the Bious does not see the hard drive. Current Bious is 1.2.0 and current is 1.4.0.

  If the BIOS does not see the hard drive, no - you will need to replace the disk.

  You can take a chance on the resettlement of the player (unplug the system and disconnect and reconnect the hard drive), but if so, it is not detected by the system, it is toast and needs to be replaced.