HARD drive replacement when original is discontinued MK3265GSX - VPCEB15FG -.

Similar Questions

• Z500 hard drive failed, when the new bios disk inserted don't is not loading

  Out of the blue my z500 crashed and restart the hard drive was not recognized. I opened and made sure it is properly connected. Still nothing.

  I bought an ssd and inserted into the slot of the hard drive and when turned on it flashes the lenovo bios boot screen then instantly goes black. It flashes black then black and backlit constantly

  I removed the SSD and it loads the BIOS without a drive.

  I returned the ssd and got a replacement. The same problem reoccured.

  The ssd is approved to the z500 site crucial and fine as an external hard drive can be installed.

  The original hard drive makes a powered noticeable when rattle noise so I guess it was a normal failure.

  Any ideas? Any other information needed? I am a complete newbie to these forums and appreciate help from anyone.

  Thank you very much

  caduceusuk wrote:

  Out of the blue my z500 crashed and restart the hard drive was not recognized. I opened and made sure it is properly connected. Still nothing.

  I bought an ssd and inserted into the slot of the hard drive and when turned on it flashes the lenovo bios boot screen then instantly goes black. It flashes black then black and backlit constantly

  I removed the SSD and it loads the BIOS without a drive.

  I returned the ssd and got a replacement. The same problem reoccured.

  The ssd is approved to the z500 site crucial and fine as an external hard drive can be installed.

  The original hard drive makes a powered noticeable when rattle noise so I guess it was a normal failure.

  Any ideas? Any other information needed? I am a complete newbie to these forums and appreciate help from anyone.

  Thank you very much

  Try to install the ssd (of course power should be turned off before doing so). After the physical installation and place the back cover press the NOVO button. A menu should appear and select bios Setup to access the bios. If you can go into the bios put the bios configuration to the default values. Then set the PXE boot to disable. Save and exit.

  Note: You must start in a usb/dvd of windows installer since the ssd has nothing about it yet. Then may need to change some settings in bios inorder to do this.

• Portege 4000 hard drive Replacement - what HARD drive is compatible?

  Is it possible to find a replacement for my Portege 4000 HARD drive, because the original becomes very capricious?

  Hi mate

  I think that the Portege 4000 is an elder and in my opinion this laptop supports a 2.5 HARD disk.
  I m not 100% sure, so I recommend you to install a hardware diagnostic tool like Everest Home Edition which would provide all the information on the HARD drive is internal.
  That would help you get a new, compatible HARD drive.

  Welcome them

• Windows problem for hard drive replacement

  I am trying to replace a hard drive in a HP d530 for a science teacher as the XP is a failure. He needs the XP until I finished preparing the Windows 7 and it has data on the XP and I put Windows 7 on the new hard drive and it has 80 GB. The old hard drive Windows XP and it is a 40 GB. I had two hard drives hooked when installing Windows 7. Windows 7, the name is the C drive and disk XP the D. I tried to start the hard drive of 7 single and it gives me an error of invalid system disk. Press a key to reboot. When I have two connected hard drives, windows 7 starts very well. A computer teacher wants to clone Windows 7 for another professor of science. He said, it won't help him with two hard drives connected. How can I get on the 80 GB stand-alone installation without having to reinstall Windows 7 Windows 7. I want to disconnect the hard drive from XP and just use the hard disk 7. I have the 7 and XP on separate hard drives. They are the two IDE hard drives. I need to get the new hard drive to boot by its self and windows 7 as a stand-alone installation.

  That's good news.

  I'm so glad you took in charge.

• Portege R700-1hd: Questions about HARD drive replacement and passwords

  I have a 1hd R700 with 320 GB HARD drive in stock. I want to upgrade it to 500 GB. This update should be pretty simple, cloning from the old to the new.

  However, I was wondering about the HARD drive password / finger.
  My HARD drive it configured to use a fingerprint/password on boot - I guess that it is involved in the BIOS and the drive itself, but I'm not exactly sure how.
  I think the HARD drive itself is locked, it is not a Windows or BIOS password.

  If I change the HARD drive will still be able to use startup disk HARD password/fingerprint? Are there requirements for material of HARD drive I need to consider before buying new HARD drive? As should be a specific type of HARD drive to work with password disk HARD/fingerprint digital?

  Thank you

  Hi bullerd,

  The HARD drive password is stored on the HARD drive so when you replace the HARD drive you must set a new password of HDD in BIOS. The password is not stored in the BIOS. In addition fingerprints can also be stored on the HARD drive or let s say fingerprint digital software but all of the operating system must be installed after Exchange HARD drive so it s new problem.

  So the two passwords you mentioned are stored on the HARD drive so it s no problem to swap the HARD drive. :)

• hard drive replaced a moment my performed web cam will not work

  I have a dell m5030 I lost my o/s I had the hard drive replaced a moment made my web cam does not work WHY?

  willmason1953,

  When you have installed the operating system, have you installed the utility of the portable system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Rick

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• I formatted my hard drive, and when I try to install an operating system, repeat me "bootmgr is missing".

  I formatted a hard drive and when I try to install an o/s he repeats to me bootmgr is missing. I tried 2 o/s XP and win7 is just does not start... and the BIOS is missing pls help.

  original title: I formatted

  Create a bootable CD using one of the two utilities listed below. The utility allows you to delete the partition so that the disk space is listed as "unallocated". Do not create a new partition, just boot from the Windows CD or DVD and let the installation process to create the Windows partition.

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, Format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  General fill info zero (including screenshots): http://gizmodo.com/5494427/leave-no-trace-how-to-completely-erase-your-hard-drives-ssds-and-thumb-drives

  J W Stuart: http://www.pagestart.com

• delete a partition on my hard drive that was originally set up by the manufacturer as a backup drive hard to label.

  I hope I am posting this on the forum,

  I want to delete a partition on my hard drive that was originally set up by the manufacturer as a backup drive hard to label.

  I went into computer management console & know that the primary partition - drive C system, boot, pagefile, active lists, dump incident & main partition in brackets but I don't know about the virtual memory paging file. No, there is some data on it. I've been saving the other partition - C drive on an external hard drive.

  I know that I have to back up this data but where I should come back to? And why is it called (Primary Partition) when it is used only as a return to the top by car?

  I'm only wanting to do because I'm running out of space on my drive C & D drive are the same size! 143 GB & 139.5 GB

  I have a laptop of Acer 6930

  Window Vista Home Premium Service pack 2

  Intel Core 2 Duo T6400 2 GHz

  4 GB OF RAM DDR

  64-bit operating system

  HARD DRIVE 320 GB

  I hope I am posting this on the forum,

  I want to delete a partition on my hard drive that was originally set up by the manufacturer as a backup drive hard to label.

  I went into computer management console & know that the primary partition - drive C system, boot, pagefile, active lists, dump incident & main partition in brackets but I don't know about the virtual memory paging file. No, there is some data on it. I've been saving the other partition - C drive on an external hard drive.

  I know that I have to back up this data but where I should come back to? And why is it called (Primary Partition) when it is used only as a return to the top by car?

  I'm only wanting to do because I'm running out of space my drive C & D drive are fighting the same size! 143 GB & 139.5 GB

  I have a laptop of Acer 6930

  Window Vista Home Premium Service pack 2

  Intel Core 2 Duo T6400 2 GHz

  4 GB OF RAM DDR

  64-bit operating system

  HARD DRIVE 320 GB

  Hello

  D: is not a partition backup of your machine.

  Acer has a time set up their machines to the way yours is:

  They had a C: drive for the operating system, a drive D: for data (music, movies, etc you would like to register and a recovery partition 'hidden' to reinstall the operating system and to make the recovery discs to do the same thing.)

  You can merge C: and D: as a whole, BUT save all data on D: first because it will be deleted when you merge.

  "How delete and extend a Partition with Vista disk management"

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  And YES, you back up the data on an external hard drive in case of hard drive failure, the corruption of the system, etc.

  See you soon.

• HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive replacement

  Hello

  I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC, and I had problems with hard disk of the guarantee period. for example I buy in 2010 and had a hard drive replaced in 2011 and 2012. Next time, he failed in 2013 (almost 11 months apart on average).

  The last time it failed, the warranty has expired so I thought to give it a try as employment through fixing/amortization of bad sector seagate software, Toshiba... that came out of Smart Drive Error.

  I use the HARD drive for some time now, but want to be ready for the next round and I don't know that he's going to be gone for good next time.

  Current HARD disk is 640 GB, 7200 RPM hard drive (replaced in 2012). HP 621046-001 manufacturer.

  When replacing, can I use ANY hard drive 640 GB? Can I use a hard drive that is higher than 640 GB? Different RPM?

  Any suggestions on hard drive?

  The recovery discs I had received with the replacement drive did not work properly. I had to use the first game I had created just after I bought the laptop.

  Thank you.

  -Pratik Patel

  I think that 160GB 2.5 "SATA III SSD is good for the system.

  Thank you

  visruth

• XPS 8300 - steps to install boot hard drive replacement

  So my original Dell hard drive needs to be replaced because it has been send me errors and it is clearly a failure. If I get a new hard drive, I know how to get into the case and fasten the cables. Should I just turn on the computer with the system recovery disk I created previously? Do I need to 'Drivers and Utilties' disc comes with the computer? I've already invited Dell to the Windows 7 disc, but they never sent (4 years ago). I guess the system recovery disk should be sufficient. For any help or suggestion would be appreciated before I take the plunge.

  Hi Nively,

  Using this recovery disk, you will install the image of hard drive Dell of origin on the new hard drive. So, you will have all the drivers and original applications. Of course, you then need to uninstall all software that you don't want, like for example the MacAfee and install all the updates of Windows.

  Make sure the new drive has the same capacity or greater than your original drive.

• MSVCR71.dll missing. I installed Windows 7 Pro to Vista Home Edition. EU back up my HARD drive. When I try to put things on the HARD drive I get the message that msvcr71.dll is missing. How to install Windows 7?

  I installed Windows 7 Pro to Vista Home Prem Edition.  Back up my HARD drive with the included HP software.  Now I can't get my info on the HARD drive.  When I try to open the computer file backup says msvcr71.dll is missing.  How to install and where?

  Hi dezertdawg,

  Welcome to the Microsoft Answers site!

  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file. In some cases, the msvcr71.dll errors might indicate a
  problem of registry, a virus or malware problem, or even a hardware failure.

  You can use the tool (SFC.exe) System File Checker to ensure that the system files are intact and replace the file. Follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• My Mac has crashed. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Suite?

  I bought my Macbook Pro 17 (it's a Mid-2009, running Cougar 10.8.4) used on eBay, and it came with Adobe Master Suite CS5. I pursued a degree in graphic design, and the computer had everything that I needed to start. Now that I'm out of College, I rely heavily on InDesign and Photoshop to get the job done. However, after five years of loyal service without problem, my Mac has crashed and I have never used time Machine. I might have to reinstall Mountain Lion or replace the hard drive. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Collection of applications? I can save them somehow?

  Any reply and help would be greatly appreciated.

  Thank you for your time.

  Caleb P.

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  -page includes links to the programs to find a serial number installed on Mac or Windows

• a new backup on external hard drive replaces a precedent already on the disc

  backup to an external hard drive replaces a previous backup already on the disc

  Depends on what software is used to make it.