Hard drive Samsung HM500JJ replacing again

Similar Questions

• Well hard drives as a replacement for Satellite Pro L300-1 b 9 unit?

  Dear users of the Forum,

  The original HDD in my notebook has reached its life cycle, so I have to replace it.

  I would like to know what purchasable HARD drive units are available for this particular laptop model?

  Can I use any SATA 2.5 "portable HARD drive as a replacement disk or the Toshiba marked those are suitable exclusively?

  > Could I use any SATA 2.5 "portable HARD drive as a replacement disk or the Toshiba marked those are suitable exclusively?

  Yes, usually all 2.5 SATA hard drives must be compatible, since the SATA controller is compatible and even if you want to use a SATA II or SATA III HARD drive, the laptop must be able to manage this device.
  But of course, the performance would be limited to SATA I

• How can I identify a defective internal hard drive to be replaced on a macpro in early 2009

  How can I identify a defective internal hard drive to be replaced on a macpro 2009 beginning el capitan running

  A good starting point is the Information System (Option while clicking the Menu Apple key). At the hardware level, click on Express SATA/SATA and look for the SMART State in the bottom right pane for each HD listed in the upper pane right. Unless the State is OK, looks like not verified. If the drive is totally dead, search for a missing list for a drive Bay, you know is filled.

• HP Recovery Kit will re - install Vista if hard drive has been replaced?

  Hello everyone, this is my first post so I hope that I understand.

  I bought a HP Pavilion s3050uk of second hand compact office, product number RY930AA.

  The only OS on it is a trial version of Windows 7 Ultimate, little time to expire.  I knew when I bought but I was just able to reinstall Vista Home Premium using the HP Recovery Kit and the number of product key from the COA on the PC sticker.

  However, I think now that the HARD drive has been replaced at some point - my machine has a 200 GB (Seagate ST3200822AS ATA) and I think that these machines haven't shipped with a 250 GB?  Now, I'm worried that I will pass on the recovery kit but it won't reinstall Vista because the hardware has been changed.  If it is probably the case of others has experience then I may as well save my money (which is very tight at the moment, where the 2nd hand PC) and put it toward the purchase of an operating system package full.

  Hope someone is able to advise me.

  Thank you

  Stephen

  If you buy a defined recovery disk and perform a factory original operating system image recovery and the partition scheme will be installed on the new hard drive.

  Certificate of authenticity (w\ license key) Microsoft Windows OEM is always visible on the bottom of the laptop?

• hard drive must be replaced. can I get my membership back and reinstalled my creative cloud?

  hard drive must be replaced. can I get my membership back and reinstalled my creative cloud?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Replacing hard drive Samsung HD103SJ

  I have a Dell Studio XPS 8100 with a processor i5 8GIG memory, Windows 7 Professional (upgrade online after purchase Dell) and a single 1 TB Samsung HD103SJ HARD drive.  Last weekend the Samsung went south.  The disc does not turn and the BIOS can't see it.  My brother-in-law said 'No problem' and proceedes to attempt restoring.  After dozens of false starts, the BIOS settings and a six-pack of beer, he declared defeat.

  I have three questions:

  1 how the BIOS "SATA Mode" should be selected for a single 1 to HARD drive? (I get a new 1 to Western Digital Black from Dell)  All BIOS functions are now on 'default' including the "SATA Mode" in "RAID".

  2. is there a maximum number of times you can use the DVD to install Dell Windows 7?

  3. have Windows 7 Professional installed previuosly will cause a problem reinstalling Windows 7 from Dell reinstallation DVD in the new HARD drive?

  Thank you

  Thanks, I'll use SATA.  I didn't know if DELL had shipped AHCI in their RAID BIOS option somehow for a selection of hard drive.

  I have downloaded the ISO in Windows7 Digital River of www.w7forums.com/official-windows-7-sp1-iso-image-downloads-t12325.html, created a DVD and actually seen the page of presentation of Windows 7!

  All I have left to do is load all the drivers and software.  It is a road I've been down many times before.

  You reference for the download of Digital River has been a godsend.

  Thank you, I apologize for any reference I have that could possibly be to you when I let loose all how DELL handles the problem of lack of HDD Samsung.  I saw how you helped a lot of people in the community of DELL and now I'm one of them

  Thanks again!

• Hard drive has been replaced and get the activation message

  My hard drive crashed (again) and the GeekSquad replaced the hard drive and reloaded the OS from a disk they had in the store.  I get a message from windows activiate.   I have the restore CD but did not have them when the car crashed.   How can I find my activation code?

  For activation look side on the box office or a cell phone, the bottom of the laptop.

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  5) stay on the phone (do not select/press options) and wait for a person to help you with the activation.

  Also:
  How to resolve common activation problems
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 67219.entry? a = 584475978

  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Hard Drive failed after replacement

  My computer recently went for a drive hard repalcement of HP Support because it is still under warranty. After that their return receipt I'm gone and ran the same test that tells the hard drive failed the last time and received a fault code of

  GGANWC-67H6K8-XD7X1F-60SF03

  It looks like the last. Is this a Bios problem causing the hard drive give errors or is it another failed hard drive?

  Hello TheProfitible,

  You just had the HARD drive replaced and now you've found a similar mistake that he does not have.

  The code checks that the HARD drive has failed.

  You should call HP and have them replace the disc again and check the motherboard. It could be a problem with the motherboard failure.

  Sorry to hear it happened.

  Here is the link for the phone number for HP.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• My hard drive has been replaced, now PE does not work!

  My laptop was having problems, which ended in my motherboard and hard drive being replaced. Before doing so, I basically copied my entire hard drive to an external drive. I copied everything then back on my laptop with its new hard drive, but now when I try to open PE it tells me to uninstall and reinstall. The problem is that it is not technically installed on the new hard drive! I have no way to uninstall it! What should I do to get it working again?

  More information:

  It's first Adobe Elements 9.

  I use Windows 7.

  I have no access to my old hard drive (just what I copied on the external drive to backup/storage).

  Given that I copied all of the hard disk, the program and everything with it's on my new, but I can't figure out how to uninstall or reinstall.

  (I have the same problem with Photoshop CS3 Extended, if anyone can help me with this too.)

  You will need to work around the problem that it won't let you not uninstall first. You may need to go through the instructions to remove manually, here - http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-9.html.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Find Firefox bookmarks on the old hard drive to transfer HD again?

  I had to replace my motherboard and install a new operating system on a new hard drive. Windows 7.

  The former hard drive windows 7 OEM and wouldn't start with the new MB.

  I need to retrieve the bookmarks from the old HD which is connected to the new MB.

  I can access the folders. I just can't find the bookmarks.
  

  I need them to be complete, because I used advice in bookmarks so you can connect to some sites that I don't remember.

  Help please!

  Hi wertach, in JSON files are "restored" instead of "any". Please visit: https://support.mozilla.org/questions/1024626#answer-638819

• HP 14-r025tx: what is the maximum size of hard drive I can replace my default one? & other hard disk performance issue

  My default hard disk is almost full and I plan to update. What is the maximum size that this model could overcome? Very well is 2-3 to?

  Another question.

  I replaced my optical drive to a box with a 250 GB SSD HARD drive inside. I installed my new operating system here, and makes the default boot drive. The default value of HARD drive that comes with the laptop is my backup drive. This is configured by okay?

  or

  Do I have to put my SSD on the default HARD drive space and put my 2 to/3 TB harddrive on the caddy for maximum performance?

  Hello

  1. in theory, you can get 2 TB or TB but 1 TB has better peformance.

  2. you cannot boot from the caddy. My suggestion: use for normal Bay and 2 TB SSDS in the caddy. You both what you want.

  3. as (2) above.

  Kind regards.

• hard drive failure and replacement of the laptop pavilion dv6-1000

  It seems that the hard drive has failed in the laptop.  When I run a test gives me a message 3f0 and hard drive does not exist.  Tried to start the repair system and the operating system not found.  Would fix with the image of the system.  No found boot device.  Conclusion: new hard drive required.  The laptop drive is a seagate momentus 320 GB 5400,6.    Do I have to replace it with a new seagate or can I use a Western Digital with the same 320 GB, 5400 rpm?  Thank you in advance.

  Hello:

  WD should be fine and if you want to use a disc 7 200 RPM faster seek time (at a small cost of battery life between charges) you can go with this too.

  Paul

• HP Envy M4: Just changed the HARD drive (failed) and replaced with SDDS, having problems loading OS System.

  SO as I said, my HARD drive wasn't so I went and replaced by a DDI, I did not have any recovery disk or anything, because I didn't need anything off the old HARD drive (I had an external which had all my videos and photos) now my only question is how can I load my old windows 8 OS and then upgrade to windows 10.

  any advice or assistance would be greatly appreciated.

  Thank you

  Alex

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• How can I remove the recovery partition from a corrupt HARD drive that I replaced in a laptop?

  I replaced a HDD corrupted in the laptop of a friend and you want to reuse. How can I delete the recovery partition? When I try to use my Windows 7 computer management tool, it will not access? I did a complete player wipe (twice) what the partition is still there and I can't remove it. It's 14 GB of space I want to retrieve and use the HARD drive in another system at a later date.

  Thank you

  Try the command line option:

  Start cmd.exe as an administrator, then inside the window cmd, type

  DiskPart

  then, type diskpart

  list disk

  take note of the correct disc ID to clear

  type

  Select disk x

  (where x is the ID of your disk to erase)

  type

  clean

  your HARD drive will be erased completely

  or you can try the magic of partition:

  http://www.partitionwizard.com/

  or if it does not work:

  http://www.hirensbootcd.org/download/

  Hiren's boot cd and gparted tool available.

  You must create a bootable CD or USB pen as media.

• Reinstall xp after that hard drive has been replaced

  Hard drive of my computer dell laptop crashed. After replacing the drive hard windows would not load so I made a boot xp from my office (also xp) drive. It worked but I had to use the product code of the dektop pc. It is a way to put the good prod code in my computer dell laptop? When I restart the laptop dell, he said e-machine while it is charging...

  Hello

  Because you replaced the hard drive, your windows product code can not be validated. I suggest you to change the product key by using the product key. Follow the steps mentioned below.

  Method 1:

  I suggest you to update your product key. Click on the link below.

  Update your Windows product key

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key?displaylang=en

  Use the new product key and check if the problem persists.

  Method 2:

  If method 1 does not work then, I suggest you to make a phone on the system activation. Click on the link below.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.