Pavilion 15-n063sl win8 - dvd and hd problem

Similar Questions

• Reading CD/DVD and writing problems

  I tried the Microsoft fix for automatic in the event of a problem with my CD/DVD/R/RW.

  I tested drive with a cd of software that installs my external hard drive.

  Here are the results:

  CD/DVD media is not readable (slimtype DVDA DS8AIP Device) Format is not supported

  Class filters are corrupt

  Device is not working properly it is device is facing a problem that prevents it from working

  The CD/DVD drive is disabled in Device Manager (NO it isn't)

  The CD/DVD drive is not accessible via a drive letter assigned. architecture Windows 6.0 x 86

  This vista is a HP Pavilion Home premium and should have a SuperMulti 8 X DVD + R/RW/w/double layer support.

  I used hp recovery discs to recover this sysytem to the original operating system on 3/30 and my CD did not work since. How can I fix it. I tried chating with hp support and got 0 help. The drive is not available to download on hp either. I don't know how to solve this problem. I also used the 982116 KB, but this info was not applicable.

  I need to install the CD for maxtor to be able to use my external hard drive to retrieve my photos and documents. I would like to watch movies, do my movies at home and burn discs again. Please help me!

  This computer is always updated to the recovery and service packs are not yet installed.

  Hello Stewfss,

  I see you have another thread for the same problem. Here is a link I found:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/2fd39d57-AE60-441D-b63a-c963465e87d5/

  Have you tried all the steps suggested by SpiritX MS MVP or just ran the Fix it?

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Playback of DVD and streaming problems

  Hi, I have problems when I play DVD or stream movies. The DVD stop and start during playback and the same happens when streaming. I tried everthing Inc. system restore, I do not have the disk of vista because it was preinstalled on my pc, any suggestions?

  Hello

  I suggest you a boot minimum troubleshooting to try to isolate which interferes with the normal operation:http://support.microsoft.com/kb/929135 do not assume that any program of an individual could not be at fault.

  A preinstalled system must have a method to reinstall, it's usually a separate accessible at startup restore volume. Preinstall the system builders rarely provide records of our days. Note that these procedures for recovering factory usually erase all data currently on the system. Your support online documentation or the manufacturer of the system will have details on how to use the method of recovery that they have planned.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Pavilion G7-2269WM: win8 uninstalled and installed win7

  I uninstalled windows 8 and installed windows7.  Everything is going well except the wifi lan drivers of and ubsss drivers are not installed.  Device Manager shows yellow signs.  I can only find drivers for windows 8 on the HP website.  Where can I find windows 7 drivers required for the functional unit?

  Hello:

  First download and install the amd chipset drivers and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Wireless:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229463&swItemId=ob_108191_1&swEnvOid=4058

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• Problem reading DVD and CD - RW on the Satellite 1800 412

  HI -.

  My laptop has recently stopped playing all DVD and CD - RW - ordinary CD work fine, but when I try to play a DVD or a CD - RW it whirs for a while, then I get the message "Windows cannot read this disk. The disc may be damaged, or it could be in a form that is not compatible with Windows.

  I use a Satellite 1800-412, Windows XP (home edition) Service Pack 2, and the DVD drive is a SD-C2502.

  I watched the updates of the firmware of my drive to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home as this is often recommended for problems of this kind on this forum - but not all are available.

  Any suggestions?

  Thanks much :-)

  Hello

  I read on some sites that doesn't update the firmware solves this problem.
  I recommend you to remove the drive from Device Manager.
  After restarting again the operating system should recognize the drive again. Perhaps this procedure will help you solve this problem.

  Concerning

• Mr. Fix it cannot fix the DVD/CD, reading and writing problem

  I had a problem a few months ago this onc I put a CD in the CD/DVD drive, it can't read and rejected and ask to put a readable CD, then I run Mr. Fix and the problem disappeared. recently just the same problem, I tried Mr.Fix but it cannot solve the problem, then it is there another way to solve the problem

  Best regards

  Ramzi salameh

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - much real experts help and hardware information
  http://Club.myce.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• I miss my cd dvd drivers and have problems to find to resettle. Any help?

  I miss my cd dvd drivers and have problems to find to resettle. Any help?

  Go to the support web site of the company that made the PC (there they are hard inside) or the company that makes the cd/dvd drive itself if its an external drive (USB?). They provide the drivers for their hardware.

  Check on your support site relevant to the brand and specific to the model of your PC (or an external drive) and any provision supported drivers or software for the readers, should be there.

• DVD and CD burning problems. "There was a problem burning this disc."

  My Windows 7 64-bit is used to burn CDs and DVDs fine, but has developed a problem burning CD, DVD and Blu - ray using the software's built-in windows.  Both drives burn perfectly well using third-party software 3rd IMGburn, that leads me to conclude that this is a specific Windows problem.

  I have two drives, one is an Asus DRW-24B1ST CD/DVD burner and the other is a cd/dvd/blu-ray burner Lite-On iHBS112.  No reader is going to burn any type of disc as controlled, that is to say: "with a CD/DVD drive.  The only way a disc will burn, but if I select 'like a USB flash drive"I don't want to do.

  If I select to burn as a mastered disc I get this error:

  "There was a problem burning this disc."

  There was an error burning this disc.  The disc might no longer be usable. »

  He's not even trying to start burning it's an instant error as soon as I click on "next".  Also, it doesn't matter what speed I select burn to.
  Help, please.

  Hello

  You can set the profile damaged by using the following link:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

   
  I hope this helps!

• HP Pavilion dv6 6120sb early and watch problem

  My computer HP pavilion dv6 6120sb laptop has a few problems:
  Sometimes when I push the power button it looks completely dead and I mean no response, no lights, no noise, nothing.
  I always have this problem when I just have it turned off.
  So when I wait for a while (from 2 to 20 minutes) it works again.
  But this isn't the only problem, when the screen turns off automatically it turns over when I move the mouse.
  And I can't get him out of sleep with an external mouse (own keyboard not responding any more) and no screen after waking up, but I hear it's there by a few windows sounds.
  Since I am a computer scientist, I totally disassembled the laptop 2 days ago and the problem has been resolved! Until today
  I removed the battery, pushed the power button for 20 years and even flashed the BIOS again by an official tool from HP but nothing resolved.
  My opinion is that there is a problem with the sensor cover (what seems to be a magnetic mechanism) or the card supply, but how can I solve it?
  PS: laptop is 2 weeks out of warranty and I really need it for school!

  Thanks to all who tried to help me.

  I solved the problem of deleting a component and making a bridge between the 2 contacts.

  As I thought it was the sensor cover on the power supply Board which is known as SW3.

  I measured all contacts of the component, and then the CRS gave me 3.3V, Out was only 1.1V (without a magnet).

  When a magnet was near him, has given to 0V.

  So I deleted the component and filled the will of the VCC. Now, I don't have any sensor cover more (I don't like on this subject) but my laptop working again as it should be.

  Contact me if you want more information.

  (The photo was taken before that I deleted SW3 and filled the 2 contacts on the left)

  

• Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

  Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Satellite M40 - DVD / CD player - reading and writing problems

  My M40-704 has developed a habit of not recognizing some discs DVDs and also a few CDs. This is unrelated to the quality is very difficult to find what exactly is the cause. I have the TOSHIBA DVD-ROM SD-R6112 drive. On an another Tosh I have for work (a Tecra) I have a NEC drive, which works very well. I'm stumped and annoyed.

  Right now I can't read all white or written on DVD/R is the most annoying question... Is this just a reader of trash? I wait too long? Yours confused

  Hello

  You know that not all CD/DVD media are compatible with all readers.
  As far as I know that you will find information about the support of CDs and DVDs in the user manual.
  However, I use TDKs and I m very satisfied with them.
  In my opinion, you should test several media.

• HP Mediasmart DVD - Blu Ray problem

  Hi I have a HP Pavilion dv6t-2300.

  Last month I had a problem when trying to play a few blurays with smart media. It was as if the Player tries to rplay disc, but after some time nothing happened, if I tried to update the software, but it shows an error during installation (something on this topic couldn't find a dll file in the folder of mediasmart dvd), I tried to uninstall it but displayed the same problem. After struggling with it, I decided to restore my laptop with the recovery discs.

  It worked, I was able to watch my blurays, but recently the same problem came back. So I did a little research and I found that the PC or device manager sees 2 readers of comics (F and H). I also found that I can see all the files on disc bluray but I can't play any of them media smart dvd.

  I also installed the Power DVD 10 to test as a trial and it cannot read the movies either, it says that the disk has a format of media unrecognize, or something like that.

  So I decided to try to update with the latest version (4.2.4701), but the error I mentioned earlier, appeared once again, I have the previous version (4.1.4328).

  As the media smart dvd worked until now I run only a few updates of windows and the HP updates (like the quick launch buttons and chipset). I wonder if these updates have something to do with the problem.

  BTW: I can watch DVD movies without problem in the DVD Smart Media, the problem occurs only with the BD discs.

  I hope you can help me...

  Thanks in advance.

  You can post a screenshot of what you see in 'computer '?

  You use a virtual drive?

  Here's what yours should look like.

  

  Drive 'E' is the second last next to drive Clone as appropriate so that DVD MS is going to see it.

• The DVD R/W drive is not recognize the presence of any media in the drive. Whenever I try to play the media, the door opens and I get the message "insert a DVD and try.

  The DVD-R? Drive W is not acknowledging the presence of any media in the drive. Whenever I try to play the media, the door opens and I get the message "insert a DVD and try. Help me fix this error condition, please.

  This has happened a lot of tme, since the last 3 months and I am unable to play any CD or DVD. I have trried Windows Media Player, Real Player, Quick Play and even the free VLC Player, giving the same result unusable.

  Mine is a HP Pavilion 6407dv laptop with Windows Vista Home Premium pre-installed.

  Will be extremely grateful for the quick and useful help.

  Thanks in advance.

  -Rajaram

  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Hi Rajaram77,

  ·         Are you facing this problem with all DVDs?

  Try this Microsoft FIXIT who could help you with the problem.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• Pavilion 500-018: BD/DVD player not working not not on a pavilion of 500-018

  Hello

  I have a 500-018 Pavilion on the Bluray/DVD driver no longer works. The drive is detected in the BIOS but Windows 8.1, I can't access the drive at all. The drive is listed as a BD - ROM drive.  I tried uninstalling and reinstalling, but it doesn't help.

  I tried the diagnostic tool to sequentially play a DVD the disk and it says to insert a disc, even if there is already a disc inserted.

  Any suggestion?

  Thank you

  Gilbert

  Probably more likely.

  The probability is the laser that scans disks disappeared, so unfortunately for you I think that you might have to buy a new optical drive.

  --------

  Please give a boost to the top [ BRAVO ] to say thank you

  or if this solves your problem, please click "I accept as a Solution."

  I don't have any affiliation with HP, I'm just a customer like you.