Hard drive to new system transfer

Similar Questions

• can change hard drive I use data transfer or use the old key product key

  IM changing my drive hard sata to ide old ones and basically gets one more big one I was wondering if I can just coppy transfer data from my old hard drive to new, or just use the old produckt key really didn't wana must buy a new product key can anyone help or give me some info on this I would greatly appriceate it

  No, you cannot, if you want Windows 7 on a new drive with your programs and settings, then it is better you create a system image and restore it on the new drive. See the following for instructions:

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• Not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system

  HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?

  If F9 does not run the diagnostic, then most likely to replace the hard drive.  Once the new drive in place, start the recovery DVD series that was made when the PC was new.  If you do not make them, or they are lost, order a new set of HP.

  See here: http://support.hp.com/us-en/document/bph07143

• Add the old computer as as 2nd hard drive to new XPS 8700

  Hello

  My old computer - Dell Vostro 410 just stopped working so I now have a 8700 XPS.

  My problem is that there are some files on my old drive hard vostro that I need. He has been using Windows 7 and the hard drive, I have upgraded to a Western Digital Black Caviar 1 TB SATA.

  But the new '' runs on Windows 8.1.  I can't upgrade the old hard drive to the old computer died. Someone at - it ideas how I can get my info from my old to my new drive?

  I tried to install the old disk until the 2nd hard drive but the system does not recognize it.

  Any help would be welcome.

  Thank you

  Hello and yes I have an answer.

  Also, I had a second drive win 7 ult and it went out to install in my new 8700 XPS thing is that I already formatted the disk to work to the point 8.1. He came to light, a UEFI system installed, may fail to start if a secondary drive is attached that contains logical partitions. Of course, this should be an MBR disk configured, but if it has at least one primary and one extended partition, it will stop Windows 7 and Windows 8 start.

  To correct this test facility 2nd main drive, then use a boot disk to get the computer running then access the disc to remove files.

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• Transfer information from the old hard drive to new

  I have a desktop compaq presario with hard drive failure and I was wondering the best method for transfer of norton 360 and other info on new hard drive.

  Contact Norton Customer service. Use the online chat.

• Upgrade XP to Windows 7. Put my hard drive in my system that has a new motherboard

  I have to update my material, so that I can update my system to windows 7. I intend to use the same hard drive with a new motherboard, processor and other equipment that will be compatible with windows 7. Since I'm on the same hard drive I intend to buy the updated Windows 7 home version. I have a full version of Windows XP Home Edition that was used to install the OS on my current hard drive. Is that I have problems with questions of Microsoft or policy reguarding the software used on another computer when it is really the same computer thanks to the equipment updated, so that I can buy the update of win 7 and get current with the time?

  Hello

  If you wish to format your hard drive, and you use a Windows 7 upgrade version, do not use a program from another software manufacturer to reformat your hard drive before installing Windows 7.

  For more information, see link below: upgrading Windows XP to Windows 7: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-xp-to-windows-7

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• Hard drive Windows 7 to transfer to the new motherboard without reinstalling

  Hey all -

  So, my goal is to transfer my old hard drive to a new motherboard without reinstalling my OS. I heard that it is possible, but difficult.

  If I find it's too intimidating, anyone know how I can do to reinstall my windows 7 if I don't have an installation disc? I got it through the .edu email and I don't know that I have the original installation file, is it possible for me to re - download without paying again?

  Install everything on the new motherboard, and then turn it on.  It should be like Windows Vista, it will take some time to sort itself, go online to get drivers etc (so ensure you have the new drivers for motherboard on hand like LAN, graphics etc. where it cannot find them online), but you shouldn't have to reinstall.  You will have to reactivate.

• New error message after upgrading the hard drive and operating system installation

  Hello

  I replaced the hard drive and was able to install the CD recovery successfully. I replaced a 200 GB with a 250 GB. Everything booted up ok, however, I made up the internet and has been advised that I am successfully connected to the internet, my laptop shuts down: and restarted with a Long written below in bold error message. The Message reads:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follo as follows:

  Check that a new hardware or software is properly installed. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000000A (0X00000002, 0X00000001, 0 X 00000064, 0X81FA4DAE)

  Data collection for the crashdump...

  Initialization of the disk for the crashdump...

  Dump of physical memory start disk: 100

  Complete physical memory dump.

  For more assistance, contact your system administrator or technical support group.

  The error message was dispelled that I changed the memory of 64-to-5300. Then I did about 5 days of windows updates and now my laptop is up and running thank you very much!

• Reinstalling operating system after hard drive failure. new hard drive is smaller

  Is it possible that I can use the smaller hard disk in my slimline model possible s3500f. The original drive has failed and needs to be replaced. I have that I bought a few years ago, it's 300 GB of the disk sata hard donkey used. The reader who couldn't amounted to 500. I don't just have money to buy another hard drive. Nor have the money to buy a vista 64 installation disc. I made the recovery discs when I bought the machine like a good girl should, but now I find out that they will not work to install the OS on the new drive, because it is smaller.

  Is there a way to get around this? My financial situation like so many others has changed radically since I bought the computer and try to get money$ $ for a new hard drive or Setup disk would take time and my son needs the computer for school, which begins this week.

  Thank you in advance to anyone who knows a solution

  Sshhameless1

  Salvation, which will not work because they will not be able to send a file of 3 GB email.

  Your choices as I see it is to make a 32-bit installation media, or have your friend make the 64-bit support and you deliver the completed flash drive, after they test.

  You can start just up and then cancel the installation - just to make sure it will work.

• El Capitan loaded on my external hard drive disturbed my system preferences Maverick on my drive internal

  I currently use the most recent version of Maverick from an internal hard drive on my iMac. I needed to download the demo of Final Cut Pro X or under of El Capitan Yosemite and due to a limitation of version of FCPX. As I had an another Maverick boot on an external drive, I've decided to upgrade this drive to El Capitan. A few hours after the installation was successful, and I was able to download the trial of FCPX. So I planted my system and restarted with my boot Maverick my internal drive. So far so good, however, to my surprise, I can't the system preferences window because it gives me the following message appears "Unable to open the preferences system because of a problem.". Similarly, I get the same message when I load a DVD and the DVD player will automatically load.

  I need to go to my applications and open the program individual (Preferences system and DVD player to do what I want to accomplish.

  I restored tOSX recovery Mignot, but nothing has changed. I believe that El Capitan installation on another drive has created conflicts.

  I also discovered that my backup should be completely redone (i.e. backup lull in my go 530)... beautiful!

  Someone has a similar problem?

  If I can't solve this problem, I have to install El Capitan on my internal drive and maybe the problem will be solved.

  I would eject the external hard drive with the installation of El Capitan and see if it helps.

  FWIW, I have never known or seen reported when an installation on an external drive also changed the preferences on the internal drive.

  I suggest that you eliminate problems in your user folder by checking in the comments or in a new user.

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can ignore connect them with one identifier Apple. Hit continue and then jump.

  Only applications Apple will be on the dock.

  Go to Applications to open other applications.

  You still see the issue?

  If Yes, then the problem is with your core files.

  If not, then the problem is in your user folder.

  You have the time Machine and internal backups of your disk clone?

• How to get to the settings, DATA from the old HARD drive to new Tecra A10

  My 'old' TECRA A2"refused to fly (fell on the desk)... Screen and grapfic external duty!
  But the HARD drive is still OK and works via an external USB HD adapter to my other PC.

  Can read all the files in the root directory,
  * can NOT read only password protected those *:
  means all files * DOCS and SETTINGS below *.

  My password old route was:
  PW to START WIN XP
  OUTLOOK 2003 via the backup.pst PW

  Bought a new A10 TECTRA...

  HOW can I get the form parameters of DATA etc., my old HDD via USB in my new TECRA A10?

  ANY Suggestion?

  Hello!

  As far as I know that you must add the Group everyone in the folder options. Right-click on the folder-online security-online advanced-online (effective) permissions
  There, you must add the user to the other laptop or for example all users. Then it should work.
  I had this problem for 1 or 2 years and it worked for me.

  A friend of mine told me that he was able to copy the data to a Linux system. You can start form a Linux boot CD/DVD, and then copy the data on the other PC.

  Welcome them