Hard drive USB of WRT610 and Mac osx 10.5

Similar Questions

• External 2.5 "80 GB of HARD drive does not work on Mac OSX Leopard.

  Hello

  I just bought and 80 GB USB drive (Toshiba) external HARD DRIVE and I'm not able to make it work on Mac OS X
  Secure Login for HD, I installed, but when I launch the application, an error is displayed: 'no devices found '.
  Help, please. He now works on Mac?

  Thank you in advance.
  Best regards
  Bogdan

  Have you checked the features of HARD drive?
  I m not 100% sure, but I put t think that the software installed on the HARD drive is designed for Mac OS.

• iTunes library to external hard drive works on pc and mac

  Hello world

  I have 1 pc and mac 2. I also use the music library to icloud. However, it depends on the internet connection.

  so, I was wondering if I can put the "itunes library" file on each laptop, the "itunes media" while on the external hard drive?

  My idea is to use an external hard drive whenever I want to use the laptop. so I don't need to broadcast through library icloud music. Moreover, I need an external hard drive and itunes library to work on pc and mac.

  Cheers!

  See make a library of portable split. You will need either a for OS X NTFS driver or driver for HFS + for Windows in order to use the drive with an operating system. Also note that there is a delay when you first launch after passage of one BONE to the other.

  TT2

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• External USB hard drives lose its connection and work stoppages. __

  External USB hard drives lose its connection and work stoppages.

  History

   
  Windows 7 Ultimate - 64-bit
  I installed it on a HP Pavilion, OS, 64-bit, and I have this problem.
  People report that it does not occur with Windows 7 32 bit OS.

  Problem:
  Any brand of external hard drive USB (and other USB devices sometimes) lose its connection and stops working only when copying large files internal drive to external USB drives.
  The USB device may appear to work properly when Windows first starts, but later stops working (crashes computer) after the start of large files to copy. You must restart Windows for the USB is working again.
  This only occurs when you copy files large files to THE USB port, not on the internal drive. It happened when I synicing my IPhone with Itunes when it started the synchronization of music files.

  According to the suggestions I have:
  1) updated the BIOS from the websites of the manufacturers.
  (2) power management disabled on the USB hub for disks
  (3) ensure that the BIOS for Legacy USB is set to.  I don't have this option in the BIOS settings.
  (4) this is not a motherboard problem, it is located on three different MB that we use.
  Also tried three different USB drives and different cables.

  Because I tested with two different computers updated and USB drives, our opinion is that this problem indicates that the Windows 7 64-bit operating system.

  Someone knows a solution?

  Hi Jh6284,

  Thank you for posting.
  What is a version of Windows 7 RC or RTM?

  You can try to uninstall and reinstall the drivers for the USB ports in Device Manager.

  UNINSTALL ALL USB ENTRIES IN DEVICE MANAGER ASSOCIATES.

  1. click on START
  2. right click "Computer" and select "Properties".
  3. on the left side, click on Device Manager.
  4. expand the 'USB Bus controllers' category
  5. right click and uninstall all THE references listed
  6. restart your computer and check if it works.
   
  I suggest you go to the Web site of the manufacturer of your and try to install the latest drivers for the chipset. Make sure that install you in compatibility mode there is no driver for Windows 7 64 bit.

  Please go through the article below to install in compatibility mode.
  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f

  Kind regards
  Technical support of Microsoft-yama.

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• Hard drive USB - no light appears

  Who can help me, since last Saturday, my USB hard drive shows a red LED during data transfer. Normally the led is blue in changes while transferring. Now no light does appear except when transferring data

  Hello

  Sorry, but why it is important for you, if the LED is visible or not?
  For me it is important that the HARD drive is working properly and that it of possible to transfer data to and from the HARD drive.

• the internal HARD drive has been corrupted and I fails to make the back upward. need information.

  I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks

  Hello:

  There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5079502 & CC = US & DLC = in & LC = on & query = LQ862PA & Tool=.

  What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).

  This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.

  That assumes you can read all 25 characters of the product key windows 7.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.

  Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.

  http://h10032.www1.HP.com/CTG/manual/c02666702.PDF

• Download iCloud photos to External Hard drive maxing out on my Mac hard drive

  My photo library was therefore mainly on iCloud due to its size, but I wanted have also stored it locally. So I bought a large external hard drive, plugged and copied my library of Photos of her. I made library of the external hard drive the library 'system' and click on ' download originals of this Mac. "

  My photo library increased from 5 GB to 127.5 GB local. Strangely, my iMac's hard drive began to be filled with hundreds of gigabytes of 'Other' files. Near 458 GB of "Other" files. I had to move even more files on the external drive just to make my iMac service as the new mysterious files are maxing out my hard drive.

  I'm sure that the download is at the origin of these mysterious "other" files. The download is almost complete. Is what I assume to be deleted by the Photos app temporary system files? I can't find the source of these files. My iMac utility disk tells me I have files over 121 million, while that the Finder tells me that I have only ~ 1 800 elements.

  Should I just make the trip to the Genius Bar, or this should be resolved once the download is complete? Late 2009 iMac, 500 GB; 1.3 photos.

  Thanks in advance.

  Let the full download and then check - it will probably be fine

  LN

• G6R14UAR #ABA: Hard Drive short DST failure and not able to connect to the computer.

  I got the error code 68FN60 - 7M 3801 - RXPR6K - 60R803. I can't connect through an infinite loading screen when I turn on my computer. If I really need to make a new hard drive and is not just another Windows 10 update problem, I know not how to save all my data on my hard drive and put in a new without damaging the PC in the process. I need it fixed as soon as POSSIBLE because I have to find work that is recorded thereon.

  Generally replace the HDD is pretty simple. Loosen a plate on the bottom, remove the old hard drive, install the new hard drive. Boot from recovery media to install Windows.

  With regard to the recovery of files from the hard drive old-if there is any life left in the drive, it is usually possible to recover most of the files. The simplest method uses a hard drive USB enclosure or a card. Then you plug it into a usb port on a computer to work and can browse the disc hard as internal hard drive. Copy files to the hard drive of the host computer.

  Ex:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=2300574&SKU=U12-42063

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3276554&CATID=3770

• SMART Disk FireLite 80 GB external hard drive USB drivers

  My computer does not recognize my drive external hard disk smart firelite 80 GB usb at all...

  Plug in there and nothing, the blue light is on the disk. But when I check in 'MY COMPUTER' just shows how many slots usb ate open, but nothing else...

  This drive worked at one point but now?

  Thanks for any help

  George

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. that you get an error message while you connect the external hard drive?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to connect the hard drive to a different USB port or try to connect the hard drive in another computer and check that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: If the previous step fails, check if the hard drive is detected in disk management.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

   

  Method 4: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• I took the hard drive from the computer and formatted. I plugged it in and it tells me that I need an installation CD.

  * Original title: installation

  I got my a school computer and the computer was still saying he was trying to connect to the school network. I have a TI and computer repair class so I took the hard drive from the computer and formatted I connected again and he told me that I need an installation CD what I do.

  Using an installation DVD / USB drive and install the operating system...

  If you have formatted the drive, erase you everything on it.

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Hello

  Please see error "Licensing has stopped working". Mac OS

  Kind regards

  Sheena

• How to work with files of database on an external hard drive (USB 2.0 or 3.0)

  I have Oracle 11 GR 2, installed on my laptop. I would like to create an instance of the database on my laptop, but putting the data files on an external hard drive (USB 2.0 or 3.0). The external hard drive will be still attached to the laptop, whenever the database is used. This is going to be a development machine, recently developed a prototype. Laptop is limited to 150 GB on the local disk and I want to have a database of 1 to on this subject. Is this possible with Oracle 11 g for Windows XP SP2?
  I assume that a device attached to the network storage NAS would be the best solution, but I can't fix on my local network.
  Thank you
  Milan

  Hello

  Yes, you can
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1388988500346624289

  Thank you