Hardware changes might not be detected

Similar Questions

• audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  Hello ShawnKohl,

  We can also try to go back to a time where he worked with system restore.

  Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.

  System Restore:

  Windows XP - http://support.microsoft.com/kb/306084

  Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Updates of masking:

  http://support.Microsoft.com/kb/902992

  Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.

  Best regards

  Matthew_Ha

• My nootbook nt see dives for the sound and say hardware changes might not have been detected

  s/n cnf8060mk7
  p/n kc331ua #aba

  Pavilion dv9715 nr

  Windows 7 32 bit

  I need quick help please

• Material changes could not be detected

  Hello

  I have a problem in windows 7 when I connect any usb device to the PC nothing no past on this era, no installation of device or nothing showed on the screen. When checked with hardware troubleshooting tool and devices it has detected an error that is "hardware changes will not be detected.

  Please help me with this if anyone knows the solution please tell me

  Thank you

  Go to Device Manager, scroll down to USB controllers and right click and select uninstall.  Restart your PC.  Windows 7 should now re-dectet and reinstall the appropriate drivers for the USB ports.

  Are Unit of hardware detected now correctly when you plug?

• hardware changes may not have been detected

  Hello

  I have an acer aspire laptop with win7 ultimate. recently, I could not use my usb ports and everything I plug could not be recognized.

  I installed Microsoft fix Center and the problem was solved. the usb driver is then downloaded and installed.

  same thing happened when I pluged in my mouse wireless usb, USB drive, external hard drive, printer, etc... I had to run the fix for windows download and install devices but it is this question on the "material changes could not have been detected.

  I remember that this process has been done automatically before each time that a device has been unplugged.

  I would like to know how to restore the default auto detect/download/install for any device that is plugged in.

  Thank you

  Hello

  Type services in the start search box, then press enter and search for windows install in the new window right click Sur-proprietes change startup type automatic.

  mohanad

• HL-Dt-St DVD RAM GSA - 4167 ATA Device driver problems.__Mitsumi - CR-48X5TE ATA drive has driver problems. Hardware changes may not have been detected

  I changed Windows XP to Windows 7 Home Version 3SP.  Both my DVD-Rom are not recognized by Windows.  A check in the Device Manager reports that both drivers are up-to-date.  I ran each anvenue in windows and the manufacturer's Web pages.  Now, I hope you can help?

  What can I do?

  Hi stoertebecker,.

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• resolve issues found this problem "hardware changes could not have been detected."

  my pc has encountered this type of problem, when I visited my troubleshooting... im running windows7 basic family... What can I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your response will be much appreciated.

  IM on windows7 basic family and not vista... what will I do, can you sat down I like to a step by step procedure? Thanks a lot.

  Ask your Windows 7 questions in the correct Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: "Windows could start. A recent hardware change might be the cause. "when tried to start on Windows 7 on dual-boot system

  Original title: need help

  I have a computor I received from a friend she put windows 7 on it and then reinstalled windows Vista Home Basic, but he's running slow is anyway I can restore this computor?

  Hi nicolefraley,
   
  We recommend you to perform the Startup Repair and check the result. You can also try the following:
  a. access prompt command in the Windows recovery environment (WinRE). (See my previous post to learn how to access WinRE).
  b. type the following command and press ENTER.
  Bootrec /FixMbr
  Bootrec /RebuildBcd
  c. restart the computer and check the result.
   
  For more information, see http://support.microsoft.com/kb/927392

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have windows 7 ultimate, my logitech webcam c110 does not have detected his help please

  the webcam is found in devices and printers when I run the troubleshooter it says that hardware changes might not have been detected in the webcam is detected in the official website of logitech

  Hello

  1. don't you make changes on the computer before the show?
  2. have you installed the drivers for the webcam from the CD or after they download from the Web site?

  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  You can check the link for Logitech and check if the download and installation of the drivers help you-
  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/24408/~/downloading-the-latest-software-for-the-Logitech-Webcam-C110

  If the problem persists I suggest you try to download and install the drivers for Windows Vista compatibility mode to Vista in Windows 7 for the webcam and check-
  You can check the link for assistance on compatibility mode - mentioned below
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Reference link:
  http://www.Logitech.com/en-us/support/webcams/webcam-C110

• Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

  Map Microsoft 6to4 has a driver problem	Detected		Other Solutions
  Hardware changes may not have been detected

  Hi M. - Tottimeemoo.

  According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to see link below and check if it helps.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520
   
  Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx
   

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this. .

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this

  My pc does not have a hard drive. I can't restart in any mode.

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · What options have tried advanced startup options?

  Remove all external devices such as printers and scanners connected to the computer and then try to start.

  As you mentioned you don't have a CD/DVD drive on the computer and you are not able to boot in any mode, there are only two options:

  a. you will need to connect external CD/DVD drive to the computer for further troubleshooting.

  b. you must contact the manufacturer of the computer.

• We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might caused ha this.

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might caused ha this.

  Hello ILO,.

  1. When you receive the error message?

  2. are you able to boot to the desktop?

  3. did you of recent changes on the computer?

  Method 1

  If you are unable to start windows check to see if you can boot into safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are able to boot into safe mode then I would suggest that you do clean boot and check.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start. recent hardware or software change might cause this

  Recently, I have reactivated my antivirus norton on my netbook. He told me that I needed to restart, when I went to shut down my computer, it says that there are 45 updates as necessary to update and do not turn off the computer, because after the updates, it turns off automatically, he did through the first 40 of 45 in about an hour and I finally had to go to the bed woke up he said 40 of the 45 updated installation... then my computer is dead. When I went to turn it on I got the black screen that says: cannot start Windows and a recent hardware or software change might have caused this, and it gives all the boot options. ... safe mode safe mode with network etc. I tried to start windows with all the options. It goes to the windows start page and then click on return to the failure to open the page. What should I do?

  Hello littlal

  If Windows does not start even in Safe Mode you will need an XP installation CD for this problem.  Borrow one if necessary to run this fix

  Then

  Configure your PC to boot from the CD if it is not already configured in this way. You may need to enter the BIOS to configure the PC to boot from the CD.

  Set the boot order of

  floppy (if present)

  CD/DVD-ROM

  Hard drive

  RECORDING and EXIT

  Start your PC with the XP installation CD in the drive. When you see the prompt «Press any key to boot from CD...» ", do and start the process to boot on CD.

  When the Recovery Console option is available (press R to start the Recovery Console), do it. You may be asked to what Windows installation to enter, what kind of cases the number of the Windows installation you want to work (usually 1).

  When you are prompted, enter the password for the Windows installation. If you have not set up a password just press ENTER

  At the command prompt, type

  Bootcfg /Rebuild

  Come in

  The exact wording depends on your configuration, but after a few moments, you will see a prompt that displays something like:

  Total identified Windows installs: 1
  [1] C:\Windows
  Add Installation to begin the list?

  Assuming that the information see you is correct, enter

  THERE

  Bootcfg will start the process of reconstruction of the startup list to include the specified Windows installation

  After a while, you will be asked to "Enter load identifier".

  Is the name of the operating system that will appear in the start menus.

  Type

  Microsoft Windows XP Professional

  or

  Microsoft Windows XP Home Edition

  Come in

  Then you will be asked to "Enter OS Load Options."

  For normal installations, enter

  / Fastdetect

  Come in

  Type

  Output

  to exit the Recovery Console and restart the PC

  .

• Windows could not start. A recent hardware or software change might be the cause.

  I have a Toshiba M300 and it fails to start. Here's what he said.

  Windows could not start. A recent hardware or software change might be the cause.

  If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Lanch Startup Repair

  Start window normally

  Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!

  PLEASE HELP :(

  Hi Suzanna2001,

  Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update).  You have access to a Windows CD/DVD?  Run the startup from the CD/DVD repair.  There is also an option to perform a restore of the system on the CD/DVD.  If no option is the problem, follow the steps below:

  1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.

  2. from the command prompt, run the following command:
  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  3. find the most recent and then make a note of the identity of the package.

  4 run:

  DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.

  5. restart your PC.

  You want to start with the most recent, and then remove them one at a time to find the problem update Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.