hardware changes may not have been detected

Similar Questions

• HL-Dt-St DVD RAM GSA - 4167 ATA Device driver problems.__Mitsumi - CR-48X5TE ATA drive has driver problems. Hardware changes may not have been detected

  I changed Windows XP to Windows 7 Home Version 3SP.  Both my DVD-Rom are not recognized by Windows.  A check in the Device Manager reports that both drivers are up-to-date.  I ran each anvenue in windows and the manufacturer's Web pages.  Now, I hope you can help?

  What can I do?

  Hi stoertebecker,.

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Freezes in Windows 8, "material changes may not have been detected.

  A few days ago my laptop speakers have not worked or stopped working suddenly, although it reinstall the drivers. Last night, I installed a group of updates (not counting the 8.1) to my computer and that seemed to solve the problem of speaker but ever since then it has been freezing. First regardless of the application I have open (google chrome, my antivirus software, whatever it is) suddenly doesn't respond. Then, the entire computer freezes - the clock to stop, I can't click on anything whether or get into the Task Manager but the mouse still moves. This stage lasts 30 minutes and arrives at least once every two hours - usually, I pressed the power button to turn off, but last night I just closed the lid and went to sleep. This morning, I ran the hardware and devices Troubleshooter and received the message that "material changes may not have been detected. I don't know what to do.

  Hello, Léa,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause.

  The error message you get may be due to a service that is not running or if the race is not defined as automatic.

  You can try the steps below to check the status of service.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Look for Windows Installer service.
  3. Check if it is started, if not, right click on the service and click Start.
  4. Right-click on the Windows Installer service and select Properties.
  5. In startup type, select Automatic.
  6. Then click on apply and OK.

  If the problem persists, you can follow the steps in the Microsoft article provided below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• No Audio / noise coming from my speakers, get the message: "material changes may not have been detected." When I click the speaker icon to troubleshoot

  Recently, my son plugged his headphones Turtle Beach X 12 in the front USB and my computer's audio input. Since he took the helmet, I have had no audio of my Logitech speakers.  When I click the speaker icon to get out of trouble, I get this message: "material changes may not have been detected." When I go to my control panel to manage my audio devices, I get a message that says no audio device is installed. I tried the simple things like the removal and reinstallation of my speakers and tries a recovery to date before my son his headphones plugged the computer, but those who have not yet worked. I have to uninstall and reinstall my sound card?

  Hello

  Which could be necessary, but first, first try the software road. Try the steps in this tutorial and see if that solves the problem: http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• How to fix the "material changes may not have been detected.

  Hello

  Today, I have install Windows, does everything that I usually do after installing for example installation drivers etc... But I have this problem that I can not set my brightness, I can't fix it. So I have lots of suggestions how to fix, she didin't worked. So I decide to check the resolution of the problems and has found (photo below). So how to fix it? Maybe it will fix my problem with brightness. My PC is HP 2000 Notebook PC

  http://www.part.lt/perziura/25ad002d7ffb45e1d5cc5ac27e40f3e880.PNG

  http://www.part.lt/perziura/2854669ba4565f4a6f78711ee19b88ca473.PNG

  Hi Artur,

  We understand that you need to adjust the brightness of your laptop HP 2000.

  Here's what you can do to get this resolved:

  Hold down the F2 key to decrease brightness screen Fn key and press the F3 key to increase brightness.

  If it doesn't, you can contact HP directly to HP customer care.

  Kind regards.

• resolve issues found this problem "hardware changes could not have been detected."

  my pc has encountered this type of problem, when I visited my troubleshooting... im running windows7 basic family... What can I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your response will be much appreciated.

  IM on windows7 basic family and not vista... what will I do, can you sat down I like to a step by step procedure? Thanks a lot.

  Ask your Windows 7 questions in the correct Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My nootbook nt see dives for the sound and say hardware changes might not have been detected

  s/n cnf8060mk7
  p/n kc331ua #aba

  Pavilion dv9715 nr

  Windows 7 32 bit

  I need quick help please

• Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

  Map Microsoft 6to4 has a driver problem	Detected		Other Solutions
  Hardware changes may not have been detected

  Hi M. - Tottimeemoo.

  According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to see link below and check if it helps.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520
   
  Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx
   

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• When I try to access Microsoft, my Internet Security provider tells me that this is a site without certificate - seriously? Microsoft may not have a certificate?

  Very frustrated and get VERY annoyed the monopoly total Microsoft have my PC. The system they have is beyond a joke. To change the password sign - "for my own safety', I need to enter the last 4 digits of my cell phone - to receive a 'code' to continue. Sometimes I don't get a code - OR I get an error message! Seriously? I could get into Fort Knox easier! I can't access my pc when I turn it on until I have enter the password - I LIVES ON MY OWN - that is trying to access my pc - the goldfish? I need to log in - but Microsoft have totally taken over my computer and I can't cancel the password. When I try to access Microsoft, my Internet Security provider tells me that this is a site without certificate - seriously? Microsoft may not have a certificate?

  Hi RF R,.

  Frustrating indeed sounds and it looks to me that you have two step of checking enabled for your Microsoft Account. Here are some instructions on how to disable it:

  On the two-step verification - Windows help

  I hope this helps!
  David

• NO HP devices have been detected, HP Centre will close now

  • HP Officejet 6310 All - in - One Printer (default printer) (HP Solution Center does not work)

  Serial number:

  {deleted personal information}

  Product number:

  Q8061A. Installed on the PC:

  HP Pavilion a6120n desktop PC

  Serial number:

  Product number:

  GC670AA

  HP w2207h LCD wide

  I followed all sorts of instructions given by HP, the problem persists:No. HP devices have been detected, HP Center will close now, this message any attempt activation of the HP solution Center icon or clicking the icon of imaging monitor digital HP works however the printer for printing and the scanner can be used to paint or windows photo gallery.

  Is there any possible solution to this problem, please notify

  Problem is solved.

  After posting this message, automatically updated HP up the software through authorized windows automatic update for HP on my PC (actually reinstalled the software with their own tools and appeared on start menu and not in C:\program\HP...), it's amazing, however, I wanted to know how HP has managed to solve the problem This will enrich my knowledge. ,

  Thanks for the help of HP

• Using excel, if I remove a value in a cell and you decide then he should not have been deleted, how I get it back?

  Using excel, if I remove a value in a cell and you decide then he should not have been deleted, how I get it back?

  Once you have removed the cell values and you have not saved the document again that you can always undo changes.

  Keyboard shortcut for undo is Ctrl + Z.

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• "No HP devices have been detected.

  HP PhotoSmart C-4280 all-in-one

  Vista operating system

  error message: "no HP devices have been detected.

  My device will copy, but the unit is not detected when I call the HP Solution Center to scan.

  The device appears on the list of printers.

  If I try to print, the document appears to print that, but it will not be printed.

  I've uninstalled and reinstalled twice and I can't find the problem.

  Help me if you have any ideas.

  Thank you

  Hey Winston.

  You're the man, lol. I'm so sick of this HP 5280 I have Meg Whitman to eat. No one can figure out how to get the HP Solution Center to work. I wish someone could do a job so I could unload this puppy. HP just wants your money. They will not stand behind their products.

• Cannot open the document. You may not have permission or the document can be opened already.

  Whenever I try to open a document on our Mac server I get this error message: "cannot open the document. You may not have permission or the document can be opened already. "After that, I click Ok and then am able to open it. What is interesting is that immediately after the first time I try to open the file and get the error message that I noticed a .idlk (file locking) gets created even if she could not open. After that, I open it. Then, once I close it, the lock file goes.

  Someone knows something about this problem? For this particular user permissions are read/write on the file and all documents.

  Yosemite 10.10.3

  InDesign CC 2014

  Well, the problem has been resolved. It ends up being ESET antivirus v.4.xx for

  company. After I disabled it temporarily everything worked normally. So created

  exclusions for the shared network resources that they are working for.

• table cannot be sorted because it has pending changes that would have been lost.

  I had this problem to define sort columns where the data in the column has been populated with a monetary and digital format. I had received the error is: the table cannot be sorted because it has pending changes that would have been lost. The user guide has proposed the following solution (see below) that I tried and it didn't work. Someone at - it an example of the use of this solution where it worked?
  
  How can I sort manually populated transient attributes present? (Classic and advanced)
  
  When you try to sort a column in a table that has one or more manually filled transitional columns, then the transitory values are lost when sorting. This is because the query is executed by OA Framework. To avoid this, you can do the following:
  
  * Encapsulate the logic for completing the transitional columns (display attributes) in a method.*
  * On an event of the kind, redirect to the same page in processFormRequest.*
  * In processRequest, manage forwarding - call followed tableBean.prepareForRendering of a call to the method that fills transitional columns.*

  Why do you need to fill the transitional columns manually? Is it possible to obtain in the form of calculated attributes? Of course, query would make you loose unsaved data. So if you have values in the query, such problems would not come.

  Concerning
  Sumit