Harm: Capture HDMI not the best?

Similar Questions

• What is the best way to give a user the ability to stop a vi or rerun it? I wrote something that works, but I imagine that this is not the best way to do it.

  I have a VI that executes a stepper motor, and then stops. I wanted the operator to have the option to re-run the VI or causes the complete stop. To do this, I added a while loop around the whole VI. I have an example VI showing how I made it, but I don't know that there is a more effective approach. Any suggestions?

  Thank you.

  There is almost never a good reason to use the stop signal stop execution.

  Your loop is fine.  What you really want to do, is make a machine to States which has at least 2 States. 1. perform the test.  2 inactive, waiting for the user to hit a button to re-run, or hit a button to end program.

• HDMI active? The best graphics port?

  Recently bought a G3-605 Predator, but some problem with HDMI connector.
  The HDMI does not work, but if I connect the monitor with DVI (graphics card) instead, I got a picture.

  DVI - photo YES

  HDMI - photo No.
  Two questions:
  How to activate the HDMI connector? BIOS thing?

  The best of connector to use, DVI, or HDMI, for the best picture possible?
  I have a full HD monitor.

  As the image quality, it's the same.

• importing video WMM-"video capture device not detected...". »

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  ========================================
  What is the model of your Canon camcorder? If records to
  media other than mini DV tapes, it will not import into Movie Maker.

  Also... USB is not the best method to download... Movie Maker
  has been designed to work with FireWire.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• What is the best for windows 7 / VISTA?

  I need to upgrade... and I want windows 7 or Vista... but I was wondering what system specs I have for a better windows experience... keep in mind im only 13 and my computer is not the best... I have 400 to spend on ameioration... including windows 7 / vista OS disk... I have both vista and 7 discs...

  Hello

  Here are some links that you can check and who will help you decide the best option of upgrade.

  Links: Compare Windows: http://windows.microsoft.com/en-us/windows7/products/compare?T1=tab20

  Windows Vista system requirements: http://windows.microsoft.com/en-us/windows-vista/products/system-requirements

  Windows 7 system requirements: http://windows.microsoft.com/en-US/windows7/products/system-requirements

  10 reasons to buy Windows 7: http://windows.microsoft.com/en-US/windows7/products/10-reasons-to-buy-Windows-7

• Hey.Can someone tell me the best setting of the equalizer custom on the "rocket"?

  Im trying to do the quality of the sound of my "rocket" at its optimum level if someone can tell me the best setting of the equalizer custom on the "rocket"? Even if this is not the best can someone tell me what is their custom Equalizer setting?

  any help would be greatly appreciated.

  SR - rox wrote:

  WOW I didn't know custom Equalizer sucked upwards of battery most. I use a set of earbud headphones(not_sure_of_the_model_name).well sansa if you change your song to a slow, you need to change the eq to a slow to get the best result in law?, but it is really tiring to do over and over again? or is there another method?

  Thanks a lot for your answer.

  SR - rox

  No, the speed of the song has nothing to do with the equalizer. The EQ is on the sound, not the speed. Experiment a bit with the presets and you can understand a little better.

  P.S. I wouldn't trade away normal EQ as long as you use the Sansa earphones... they are OK but only capable of so much

• What is the best for your laptop: shutdown, standby, or hibernation?

  Original title: 'stop'?

  What is better for a laptop computer, stop every time, for sleep or Hibernate. It hurt to stop all the time.    Thank you Windows Vista

  Hello

  Better to refer to the manufacturer of your system Support, their books online and their
  Forums about your model (with a grain of salt), because it will be the difference between the marks
  and even some models.

  Usually there is no exact answer but its best not to put the laptop off the coast and back
  in a field so it can be avoided. Shut down the computer using also therefore be able to short
  periods (several hours) using sleep or Hibernate would better save energy. Also allowing
  Cool and heat Electronices frequently is not the best for their long term use and
  life expectancy.

  Using power properly Plans with the right parameters of standby and Hibernate, which
  depends on how you use the computer, get the best performance and service life
  There is however no exact answer. Those who seem to be best for the way you use the
  system will probably also be better in the long term. If you "could" set with the magical settings
  that could optimize the functions of machinery and life, but then to use the machine in another
  model, as we all wish, then in fact you will get actually less usage and life
  If your usage patterns.

  One thing that many people forget, is that turn off the screen can also save power when you
  you are away a few moments and wouldn't turn the computer off. This will save
  some food through the use of a screen saver, but can be difficult to remember and does not record
  A lot.

  Check with your manufacturer for system and their forums as your laptop might already have this
  capacity.

  How to manually turn off notebook or laptop LCD - utility screen free
  http://www.Raymond.CC/blog/archives/2008/07/20/how-to-manually-turn-off-notebook-or-laptop-LCD-screen/

  Turn off your notebook LCD with one click - author's website
  http://www.RedmondPie.com/turn-off-your-notebook-LCD-with-one-click/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Upgrade the disks in RAID 6 array: what is the best

  I have a Dell PowerEdge 2900 running Windows Server 2008 R2 and 6 x 75 GB 10K SAS drives.  PERC 6 / i controller RAID 6 with 5 drives + HS 1 (total 6 discs)

  I have 6 x 300 GB 10K SAS drives ready to trade.

  I read everything I can on hot swapping etc and what I can't find is any method to close the front discs actually pulling them.  Supposed to be via Computer Manager-> storage but not here?

  Restarted, Ctrl + R, in the controller BIOS, nothing there either.

  I have therefore 2 options:

  (1) go for it, just pull up a disc and put in a new and let them rebuild.  Repeat x 5

  (2) stop, change the music, etc.  I don't like to stop a perfectly functional server...

  Looks like #1 would be better, but without the stop disk option I'm not sure...

  Then there is the whole operation in general.  It is best to:

  (1) hot-swap & rebuild

  (2) make a backup to disk image, on all readers of a sudden and restore?

  Looks like #2 would be better... but I don't still need to re - install the software on the array of naked?

  Hello

  budcarlson

  I read everything I can on hot swapping etc and what I can't find is any method to close the front discs actually pulling them.  Supposed to be via Computer Manager-> storage but not here?

  The operating system has no control on the disks. The drives are controlled by the PERC. You must use either a software that allows the management of PERC as OpenManage Server Administrator or boot directly on THE controller's BIOS.

  You should have an option available for the physical disks offline before removing a table. Which will allow you to remove a disc without causing data corruption.

  budcarlson

  Then there is the whole operation in general.  It is best to:

  (1) hot-swap & rebuild

  (2) make a backup to disk image, on all readers of a sudden and restore?

  Looks like #2 would be better... but I don't still need to re - install the software on the array of naked?

  The best practices and the method supported is to back up the data, create a new RAID array with new drives, reinstall, and then restore the backup.

  Hot swapping and reconstruction are the best way to do this, but the simplest is not the best way. If you choose to rebuild and hot-swappable, you will also need either to create a new RAID array (sliced table) to use the new space or change the markup for the table.

  Thank you

• Restore bad image for the best possible performance in Lr?

  This is a photo souvenir shot with an iPhone. Not the best quality to begin with.

  http://www.studio10webgraphics.com/InternetPosts/gals_and_ken.jpg

  Is Lr good program to try to recover a well exposed background image, but the foreground too dark?

  In Photoshop, I would like to make a selection using the pen to select precisely the dark area in the foreground for editing.

  What program can handle this better? I would like to use Lr as much as possible due to the excellent controls, but by selecting certain areas seems to be strong Photoshop.

  What is your opinion? What technique would be a more experienced user Lr use?

  Thank you

  Ken

  Simply press the fill light. Nothing is really going to save this picture so.

• What is the best HDMI switch for use with Apple tv 4

  What is the best HDMI switch for use with Apple tv 4. I heard some do not work and the automatic switch has problems because Apple tv is still using power?

  I installed on a cutting and not because the automatic switch works because it isn't always. It came with a remote control that is almost as good, so don't mind the fact that automatic switching does not work well. The reason why I chose cutting is because it was the first device that gave me the good picture and sound quality with my AppleTV, the Xbox 360 and the PS4. (Don't ask!)

• For the iPad 2 air, what is the best app for note taking allows you to use a removable keyboard and a stylus? Which is also a stylus good to use?

  I am looking to buy an iPad 2 air to take notes in college classes and I was wondering what is a good software that allows an external keyboard (like a laptop) to type notes and also allows the drawing with a stylus? What is a good pen that is compatible with the app and the iPad 2 air?

  If you really want to use stylus to take notes or draw you should go for iPad Pro with Apple pencil. Nothing else offers good experience especially for hand writing. If you ok with drawing then only pencil FiftyThree is a good choice on iPad 2 Air (but again, it is much worse in my opinion, then iPad Pro + Apple pencil). FiftyThree is also one of the best (paper) apps for note taking (and it works well with their pencil).

  The keyboards are wide work system and not a dependent application. You can go for any model of the 3rd party like you which is compatible with iPad air 2. Advice covers the Apple Smart keyboard are specific to the Pro (they need specific for Pro iPad connector).

• What is the best feature of mac may offer that is not available in Windows?

  What is the best feature of Mac may offer that is not available in Windows?

  It is almost impossible to answer without going through every single features on both.

  My "Favorites": it has Mac OS - I don't do Windows no matter what flavor (I tried several times and has given rise to a headache each time).

• What is the best way to manage applications so that they do not fill a space of memory?

  I have an iPad Air Os9, 64 g

  However, I am already up to 39 g mem.

  What is the best way to manage applications if tat I can use them, but no pork then my mem space?

  y at - it an app that manages the apps?  should I delete and re-download a few apps later?

  I would like to take advantage of many more applications that I believe I have space for.

  You can see how much storage resumes via the settings app > general > Manage Storage - this screen lists each app space (the application and its content), total by selecting an app on this screen should tell you how much space the application content (files, documents, etc.) resumes.

  y at - it an app that manages the apps?

  No, iOS is a sandbox environment, apps can control or manage other applications.

  should I delete and re-download a few apps later?

  Depends on the app. deletion of an app will also delete its content, if it is an application where its content is important (such as documents), and that content is not stored elsewhere (e.g.)  Dropbox or cloud server), you may lose this content by deleting the app.

• You are not on the latest version of Firefox. Update today to get the best of the Web!

  Whenever I update my firefox, I get this message, you are not on the latest version of Firefox. Update today to get the best of the Web!

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox. I think that Google assumes that you are using an older version of Firefox, as they hard-coded message 'upgrade' in this page - all versions of Firefox see this message.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

  See - How to set the home page

• I get, you're not on the latest version of Firefox. Update today to get the best of the Web! When I go to the site to update it tells me I have the latest version.

  I start the Firefox browser.
  When the start page shows, I get just below the Google search box:
  You are not on the latest version of Firefox. Update today to get the best of the Web!

  Not unusual, but when I go on the site to update it looking for a minute and then tells me I have the current version of the software.

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.
  
  The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
  
  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).