importing video WMM-"video capture device not detected...". »

Similar Questions

• movie maker error: a video capture devices are not detected

  Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.

  What is it?

  How is it connected?

  Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.

  This device and cable worked before?

  If so, what was the alst time and have you made any changes to the computer since then?

• This is a video capture device?

  Anyone know what it is? It came with a workstation about 5 years ago. I was under the impression that it is a video capture device, but I don't understand why there is a vga (?) connector on the end. Or I guess it's a connector series 15-pin. How can you "entry" for a video card? What do you give him? I suppose it could simply convert entered composite/s-video for a serial output, which then connects to a real video capture card. Isn't it? Video capture devices do not have their own composite entries?

  If it is in fact a video capture device, is there a manual for this? How to use it? Is it good?

  

  Thank you

  -Ron King

  
  

• Unrecognized video capture device

  Media Encoder does not recognize my video capture device.  Someone had this problem?

  Capture is a first

  Jeff

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Device not detected, I lost the sound. It is said that the material change

  original title: device not detected

  Hello! I have Dell Inspiron 1545e and I lost the sound. It is said that the material change. But I looked at the problem. But it only shows the hardware changes. Please I need help.

  Hello! I have Dell Inspiron 1545e and I lost the sound. It is said that the material change. But I looked at the problem. But it only shows the hardware changes. Please I need help.

  Have you visited the suport Dell and drivers download page for your system (by serial number would be better) and download the driver for audio and install it?

• O2 dongle is never to step of the password and then just says device not detected / found

  Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...

  Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found

  Hello

  You can try to reinstall the USB controllers and check.

  a. Click Start and type devmgmt.msc and then click OK.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the device to see if it works.

  You can also consult the following link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is helpful

• Samsung Galaxy - device not detected. ERRO - unknown device

  Original title: Samsung Galaxy - device not detected

  I have a samsung Galaxy ace and my pc does not detect. He said that the controlprogram is not installed and I can't install it, my pc says its and unknown device...

  Hello

  1 have had any changes made on the computer before the show?

  2 have you installed the software for the Samsung Galaxy Ace?

  3. the device was working fine on the computer as soon as possible?

  4. are you face any problem with the installation of the program Samsung?

  Method 1:

  I suggest you to refer to article and install the software on the computer and check if it helps.

  http://www.Samsung.com/hk_en/consumer/mobile/mobile-phones/Smartphone/gt-S5830OKATGY/index.idx?PAGETYPE=prd_detail&tab=support

  Method 2:

  Check the link and see if it helps:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Linksys wusb100 device not detected-'Code 43'

  Original title: linksys wusb100 device not detected

  I am running windows 7 64 bit I have a Linksys WUSB100 the error I get is Windows has stopped this device because it has reported problems. (Code 43) I think that the device does not work in windows 7 any idea out there

  Hello

  1. Have you made changes on the computer before this problem?
  2. He previously worked?
  3. Have you installed device driver oon your computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Run the facilities of diagnostic tool do not work or are not detected in Windows

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Uninstall the device driver, download the latest driver by downloading from the website of the manufacturer of the device, install on your computer and check the status of the issue.

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  b. in the list, double-click the type of device and then look for the specific device that is not working properly.
   
  If an exclamation point appears next to the device name, Device Manager cannot find the device driver. Go to "Use Windows Update to find a device driver."
   
  If no exclamation point appears next to the name of the device, go to "uninstall and reinstall the driver for the device."

• Camera on Satellite A300 with Windows 7 - video works, microphone not detected

  I recently installed Windows 7 on my A300, which took the Chicony Camera Assistant Software.

  I could not be upgraded, but had to make a difficult installation. Somehow, the video portion of my webcam works but the computer does not detect my mike.
  I downloaded the software but is still no success with the computer to detect a microphone. Video and mic worked perfectly when Vista was on my computer.

  Any thoughts?

  > I downloaded the software but is still no success with the computer to detect a microphone.
  What software? OS is this software is for?

• Problem with the Easy Cap Driver video capture device

  I have an EasyCap USB 2.0 video adapter and that you have installed the software, but the video driver does not load.  When I look at the Device Manager devices I see the audio drivers are installed but the video driver has the following message "the drivers for this device are not installed. (Code 28) ».  I tried to find updated drivers on the web without success.  Someone at - it suggestions?

  Hello

  What Ulead Video Studio version do you use?

  Microsoft Compatibility Center has no information on the compatibility of Ulead Video Studio.
  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=Ulead%2BVideo%2BStudio&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to install Ulead Video Studio in compatibility and see if that helps.

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Post us the results after trying the steps above.

• Screen dump of memory when you try to install the video capture device

  I have a Pinnacle Studio movieBox more peripheral of video capture that I am trying to install, but everytime that I plug it into a USB port it will say it is to install the drivers and then immediately go to a screen dump of memory and restart.  I emailed Pinnacle about this and they don't seem to be any help at all, and after giving me a suggestion told me to contact my manufacturing of computer which is me, because it's custom built, or Microsoft.  Does anyone have ideas, what could be bad?

  I was unable to find it, but it seems that a faulty USB port was the problem that I plugged into another and installed without any problems.

• USB device not detected.

  Original title: USB device

  I can't get Windows 8 to detect my USB video to DVD connector. I installed the necessary drivers but nothing seems to work.

  Thank you for your answer

  Apparently, the USB connector is damaged or has simply not. I took it to a computer store, their computer could not detect the connector either. I think I'll buy another connector $ 49 after only 3 years.

  Thank you

• Roxio capture card not detected in Windows 7 game.

  original title: how to revive plug-n-play

  I recently got a Roxio capture card and everything works fine on it, but my other computer, Dell Optiplex, could not manage it so I fell on my lenovo thinkpad and plug the device into the usb port but I forgot to install the CD it came with the first plug-n-play came with "no driver found". so now I installed it on here, but when I re home acquisition card, Plug n play dosent come up. and I tried to use the add hardware feature but could not find my device (more I didn't know really what it would be under).

  is there a way to reset plug n play or something, so I can install it with the pilot who is now on there?

  BTW, both running win7

  Hi Sonrio,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks like the game capture card Roxio is not detected in Windows.

  I have a couple of steps that should help you with this problem.

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to connect the card somewhere else USB and check.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.