Has anyone found a way to add a shortcut key for copy properties?

Similar Questions

• Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  On Fri, 28 September 2012 18:02:40 + 0000, bertcoy wrote:

  Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

  Looking at the website of Olympus, it would appear that we do not
  There are.

  But you do not need a driver because you do not need to connect your
  camera to the computer. Just put the memory card in a card reader and
  access like this instead. I prefer to do it with my camera,
  because it is easier, faster and uses no battery in the camera.

  Ken Blake, Microsoft MVP

• Has anyone found a way to process images of size different specifications of HEIGHT only to the batches?

  Hello

  you please throw some brain space on this one...

  problem = 20 images of different proportions, some offshore a few big... lots / action them all... to put them all at a specific height (1,580 inches in height - 300 dpi) for the future by making slip and fall on a single A4 page...

  so far, there is no case found that only part of the PS, I found? ... If a fixed height, width must also be set, so things get crushed if the 2nd image is larger...

  I looked in file / Scripts / Image Processor... that should work, but I tried and went around in circles with... I also studied here help Photoshop | A batch of files = resize adjustment is "No. su-ERS to" defining the size of the desired height works only one way, if the images are rectangular vertical, who works in a way and a configuration option is applied 'only' and rectangle landscape images are resized to the 2nd position, the proportions (of height) is therefore modified compared to the setting of the actual height to... the simple and obvious thing would be in order to be able to leave one of the resize to adjust the empty pixel options, it would be too easy, I guess, he said that the choice of vacuum a px (pixels) box is possible in the video above, but it is not possible, the nag screen says "You must specify the width and height using resizing options for JPEG." (this is also the case for the .psd or.) TIFF...)

  Visually and mechanically it is just a simple transformation / scale, keeping the same aspect ratio, with no culture, and a PPP eventually chosen... it seems to reach easy to be a complicated solution...

  ... Russell and I also had a go at writing an action and the CE marking on the end of a process of "Image" to solve the problem of 300 dpi which is also... the height / size question remains...

  PC - Windows 7 - CS6...

  Thank you...

  and I'm also in the market for a hammer nut 10 pounds with a 3-foot wooden handle / maybe even a bucket of gasoline and a match... or other breaking ideas...

  I did this in PS for more than 15 years.

  Create an action that:

  Opens the image

  Go to Image/Image size

  Set the height to the desired height

  Let the width only, does not change it

  "Keep the Proportions" is checked

  Click OK

  Save the image

  Close image

  Only problem you have is that you might have a few images that are too wide.

  Started using this method in PS 3 and again thru CS6.

  Do not use all of the cloud CC stuff so can't speak on that.

• Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

  Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

  To answer your question, you have to assume that once you have sent the email that it cannot be recovered. Think of it as dropping an old letter in a message box - you can't get it back once it is in the message box.

  The reasons are not only technological - it security, privacy, legal and political might be too (e-mail can cross multiple international borders).

  One hand practice also, what you want would be difficult because the emails will usually quickly reach their destination server and so can be collected by the recipient of email from this server as soon as sound here.

  By ensuring that you are writing your emails correctly in first place is the best.

• I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.

  Hello.  I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.  Thanks Bob

  Original title: product windows keys 7

  The cheapest option is the OEM System Builder for Windows 7 Home Premium license, but has some license restrictions:

  Amazon.com: Windows 7 Home Premium 64 - Bit System Builder...

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  OR

  A detail that does not have these restrictions:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

• Has anyone found at zero color noise reduction?

  I rarely change the default color for 25 noise reduction setting.  Since the last update and installation almost simultaneously on a new computer, I find the color noise reduction setting to zero the number of files.  I can't guarantee that I did not it accidentally in the past, but certainly do not remember doing so.  And the color noise is visible in most of the images from scratch.  Has anyone else seen elsewhere?  Any ideas?

  Hi Bob Metzler,

  It is based on the format of your images.

  Lightroom sets the default value of noise reduction to 25 only for raw images.

  Could you please check the format of your pictures that you have recently imported into Lightroom.

  Kind regards

  Claes

• How do you add new shortcuts keyboard for the ESTK?

  

  In many applications of our days, the user has the possibility to add new shortcuts keyboard beyond those that exist among the plethora of keyboard coming already prepackaged assignments. According to their number and the how an existing feature has been located on the keyboard, the user might have to deal with the conflict of the F2 key to their new macro shortcut assignment while making the assignment previous null.

  The ESTK interface seems to have some of these features; for example, editing-> Preferences-> keyboard shortcuts, however, I am unable to find out where and how the user can add a new macro, and assign a keyboard shortcut.

  In this example, everything I wanted to do was to decide quickly on a line or a block of comments from a script. Currently (CS6), the only options seem to be limited to Shift + Ctrl + K using this method will insert only / / ~ at the beginning of a line already has text on it and will not work on a new blank line.

  How can we (CS6) ESTK user adds a new macro and assign it a keyboard shortcut?

  I thank very you much for any answer.

  Kelly

  > How the (CS6) ESTK user adds a new macro and assign it a keyboard shortcut?

  You can't, unfortunately.

  Peter

• Has anyone found the solution to the "blue screen" that States windows has been shut down to protect your computer?

  I followed the directions when invited to press F8 but nothing not done, I find myself just to return to the 'blue '.

  I don't have add new hardware before that happened.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• Has anyone found a fix for Airport Express music jump Apple?

  I searched for weeks for a solution to my intermittent gaps in music, aka jump. It's so frustrating. I really don't want to have to go to a wired solution. It will take too long and a cable unattractive in my rooms.

  I use the Bright House Networks 5 ghz Arris DG1670 router/modem that my provider rents for me.

  The router is less than 30 feet of my Airport express

  The airport express is on the ground, hooked by fiber TosLink Cable to my Focusrite Safire Pro 24.

  • Thinking that this could be a problem I have since turned sideways to try it as a cure for that surface in contact with the ground is less. The next step, I'll try is put on something instead of on the floor. But given the proximity is is not much of a problem anyway.

  I tried:

  • change the channel on my router from 11 to 40 to 47 to the automobile. They all jump.
  • I tried the 5 ghz and 2.4 ghz for connections.
  • Streaming of my Macbook Pro, streaming from my iPad 2 Air
  • Change the setting of joint A/N to N only (since the Express a N)
  • Activation and deactivation of WMM in the router configuration.
  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.
  • Change the interval of tag to 500 ms 100. (This allows supposedly with the flow and the battery life).

  All jumps. But after change the channel to a 44 superior to WMM and putting the Express with nothing around him to block the antenna inside, he seems to ignore a little less. It is likely that there are too many networks in my home nearby that are fighting in the spectra of bandwidth, but I hope someone may be able to offer something else.

  I suggest anyone with the same problems to try some of the "fixes" I tried above reading.

  Thank you.

  It may just be possible that you have a bad AirPort Express...

  I'm assuming that you have a 2nd generation 802.11n AirPort Express AND that you have configured to join the wireless network provided by your gateway Arris... correct?

  The router is less than 30 feet of my Airport express

  As you probably already know the AirPlay flow is from your MacBook Pro or iPad 2 Air to the Arris first, then, the Express. In theory, you should get the best streaming when all these devices are co-located. As you can imagine, if you take a camera from another room or floor, the stream will pass through a number of walls, floors, ceilings, etc., which will affect the overall available bandwidth.

  • Change the setting of joint A/N to N only (since the Express a N)

  Not quite correct. The Express supports modes radio 802.11a/b/g/n. 802. 11A only works on band 5 GHz. 802. 11 b or g only works on the 2.4 GHz band, and 802.11n can operate on either.

  • Activation and deactivation of WMM in the router configuration.

  AirPort base stations do not QoS support for this parameter shouldn't have any effect.

  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.

  This setting is usually only on the 2.4 GHz radio. All AirPort base stations do support 20 MHz channels across this tape. I suggest you leave this set to "20 option."

  and put the Express with nothing around him to block the antenna inside, he seems to ignore a little less.

  Most likely, it was the most effective solution. All wireless routers must be placed so that they are in a (possible) clear space for their antennas to be clear... especially of metal objects.

  It is likely that there are too many networks in my residence nearby which are fighting in the spectra of bandwidth...

  It is unfortunately a real problem... and maybe deserves to be studied more, if only to verify that it can be a cause. In an intense environment of Wi - Fi, most people will try to get the "best" of the performance of their network. This could mean, they have implemented their wireless routers to produce a network that can interfere with others without thinking.

  At best, you can try to change the channels that you already find one located on a less used channel... but without duplication of canals, including on the 2.4 GHz band are very limited. (1, 6 or 11 to the United States).

• Has anyone found the answer yet?

  Hi people, wireless issue! I searched through some of the many threads and there are a lot of them aren't there! But finding an answer to the question... Any body know? Is that what everyone does? I use Vista on a HP Pavilion dv7, in the in the taskbar notification area, I wireless. In Device Manager, it says that the Intel(r) Wireless WiFi Link 5100 is working properly. Still on the QuickPlay bar the symbol wireless is lit orange and bright. I know that the problem is only with the HP as notebooks children have no problem with the wireless, but they are running Windows7 and they are Acer. I'm now having to connect via cat5 so you only have the wireless that went wrong. Y at - it a hotkey to switch, that turns off the wireless? Someone has any ideas why this went wrong suddenly a planet full of cell phones?

  Hello

  I have the same card wireles and it worked for me.  Download and install Revo Uninstaller on the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Make sure you have the latest Quick Launch buttons install at HP.

  Run Revo Uninstaller, do a right-click on the icon buttons HP Quick Launch and select uninstall.  During the process, you will be asked to remove entries from the registry, select all and click on delete.  Do the same thing to the left on files.  Restart the computer.

  Run the quick launch buttons Setup.  Once finished reboot again.  If the symbol wireless in the Quickplay bar is always Orange, press the button for a second or two, and if all goes well it will turn blue.

  I hope this helps.

  Best wishes

  DP - K

• Is there a way to add the Paypal code for custom give buttons?

  My site of the slopes of donations for separate programs 4 via the element structured in the PayPal button.  Each key has its own graphic Charter and, therefore, requires the < form action... code from PayPal.  Needless to say that the standard PayPal widget is not useful.  In addition, all 4 buttons are the header on the master (main, 1 inside and 1 inside).  Is it possible to integrate the Paypal code in the css pages?

  Thank you

  You can embed any code that paypal allows using the feature to insert the HTML code. NO, he can't go to the CSS pages. It's just plain styles.

• How to add the primary key for the table with the existing data?

  The table is already busy data. There was no primary key before, so for each column, there are some duplicate values.
  
  I want to add a new column, which should be of the integer data type and can automatically incremented, from 001. I tried with Oracle SQL Developer, but it says "ORA-01758: table must be empty to add mandatory (NOT NULL) column. How can I do? Thank you!

  Hello

  Look for the [ALTER TABLE | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_3001.htm#sthref4803] command to find out how to add a column (step (1)) and a (step (3)) constraint to an existing table.

  For the step (2):

  CREATE SEQUENCE  employee_id_seq
  START WITH  1
  ;
  
  UPDATE  employee
  SET     id  = employee_id_seq.NEXTVAL;
  

  When you create a sequence, START WITH 1 is the default value, so that the line is not really necessary above... I've included just to show how you could start with any number you have chosen.

• Best way to add keyListener on stage through depths object 2 below

  I want to add a listener key for my internship, but a depth of object 2 below the deck. How can I do this?
  
  I thought to add the listener of my doc class, but the listener function is in the object that is two depths under the stage, which would mean that I have to pass the key values for the next clip, when that one is responsible, then pass to the one who has the function of earphone. It seems very complicated, is it more easy way which maintains the principle of OOP?

  large.

  Please mark this thread as answered, if you can.

• My computer has been destroyed and I have to re - install all my software.  I found my Adobe Acrobat order with serial number, but I have not found a way to re - download the product.

  I need to re - install Adobe Acrobat X or XI (I do not remember that I am brush up of ashes).  I bought a laptop another Sager... extremely good by the way, came out to the orders and the serial numbers for my order and got the serial number, number and (even though I found the cover later in all the undesirable), but I have not found a way to download the product again.

  How can I get the url of re - download product Adobe X, plug my serial number and reactivate the product.  My phone number is the same as when I bought the product, as is my email address, if this isn't a con man who has grabbed my box and fled with her.

  It is the most important issue, and I added only the following at the bottom for people considering the upgrade to Windows 10 RAID arrays.

  Please let me know as soon as POSSIBLE.

  BTW, I'll have to send my phone to SAGER, because I wanted it it configured in RAID 1 and all drivers are now included in Windows 10 and if not, they have a large database they find the driver for any device the problem is with, except the driver for the disks RAID 1 array.  I called MS and I said I was on the phone to Intel who did the MOBO with the hardware RAID and tthat MS Windows 10 kept crashing whenever we tried to load drivers RAID 1.  It is a known issue for Intel.  Microsoft just laughing about it.  Has anyone experience this problem at the moment?

  Post edited by: John Regus

  Acrobat X and XI downloads are available here, but you need to know is you have a license for, like your s/n will not work with the wrong version: download Pro or Standard versions of Acrobat DC, XI or X

• Photo constantly order of photos in a slideshow changes no matter how many times the movements of the user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this o

  Apple Photo 1.3 serious problems - how can I SOLVE all these problems?

  (1) breaks down without rhyme or reason no matter where I am in the workflow.

  (2) pictures will not be Shut Down Every Time, even after several days of waiting.

  (3) aPhoto frequently badly chooses picture in the EDIT picture option, I get a picture different than the one I clicked on which is on a 100 pictures in a row.

  (4) picture constantly order of photos in a slideshow changes no matter how many times the movements of the end user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this weird behavior! Is there a way to stop this? If I drag the photo again some 7 additional photos in the slide show, after a minute or less, he appears again to where it was it not. !@#$%$#

  (5) If you make any CHANGES to a photo, it often changes the appearance of your complete slideshow of this picture with impatience. So you lose all this not work fix your configuration of the slide show. Even changing the order of photos once more that I had put back where they should be. !@#$$#@

  (6) photo identifies often shades of lamps and long door handles as the faces of the people.

  (7) photo made bad decisions when it comes to brightness, contrast and colors effortlessly around other than to use other software, where as with iPhoto there was a lot of workarounds. I could continue, but will save one who might be reading of this.

  I am up to date on all updates for my Mac. If anyone have REAL answers so please spilling the beans, but according to me, it's the only truth is that Apple has rolled out a product inferrer to replace an exceptional product, called iPhoto, which does not work on my new iMac computer 5K of 27 ".   If I knew what I would have chosen another computer that I use iPhoto to prepare more of fifty to sixty thousand photos in a given year and I use iPhoto to make hundreds of slideshows from it.  Are there plugins for Photo 1.3? I ask because I see where there could be Add-ons, but I can't find.

  Apple has taken a serious decision by turning his back to iPhoto and tens of millions of loyal users.

  Thanks in advance to anyone brave enough to tackle this job.

  James

  First, back up your library of Photos and hold down the command and option keys while launching Photos - repair your database - you have a corrupted database

  LN