has had to do a reinstall full of my operating system... pc not running right

Similar Questions

• How to handle the PSE11 when I do a reinstall full of my operating system

  I intend to do a complete reinstall of my Windows 7 64 bit operating system.  I have installed PSE11 at the present time.  Can I just uninstall PSE11 before reinstall and then reload PSE11 once the reinstallation completed? Or should I just let it reinstall it wipe PSE11 out PC?   Y at - it a problem on my driver's license or something else that I should know/do before?  I was warned that sometimes Adobe won't let me reinstall PSE11 again.

  Thanks for your help.

  Thank you very much... in other words, I just reinstall the PSE11 and put in the key that came with it and that's all I have to do... Adobe not "bother" on this new installation.

  fix.  as long as you do not modify any material, you do not need disable PES 11 before relocation and reactivation.

  I suppose anything I've done or added to PSE11 will be lost... is there a way to save one of these things?

  fix.  But yes, you can save your catalog: http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• Reinstall the Windows 7 operating system

  I bought my acer computer windows phone 7 with OS already, now I have a virus and need to reinstall the operating system, I have my product key that I got from the back of my computer, what are the steps to reinstall.

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29925/~/use-Acer-eRecovery-Management-to-restore-your-system-or-create-recovery-media

  All laptop computers Acer and come preloaded with a recovery partition to allow you to restore the operating system on your computer. You can use the Acer eRecovery Management software to create a recovery media, reinstall Windows without using a CD or DVD, or simply reinstall the drivers and applications.

• Uninstall Windows Pro 8.1 to reinstall original Windows 7 operating system, and then reinstall Windows Pro 8.1?

  Here's a good. I want to uninstall my Windows 8 Pro upgrade, reinstall my original Windows 7 and then reinstall my Windows 8 Pro update. My product key will still work on Windows 8 Pro upgrade? My reason for this? I want to retrieve all of my software that came with my computer, when it was new. I have the disc, but also the keys. Also, if someone could walk me through the steps I sure would appreciate it. That is to say: "where should I start and how? Please, I beg you. I don't want to not update my Windows 8 Pro that is not my goal! My goal is to put back my original software on my computer that I lost (my ignorance) during the upgrade. All the software is on the recovery disk of I purchased from Acer. All I really need to know is if my product key for Windows 8 Pro that I bought in shop Windows will be valid. If someone can just answer, I would love!
  Thank you

  Hello

  You don't need to uninstall anything... Just boot with the disk #1 you have purchased from Acer...

  You may have you press a key at startup to start the process, but probably not...

  You may also delete the partitions on the HARD disk with a bootable 3rd party program, but probably not...

  The way these types of sets of discs work normally is that they write more everything on the HARD drive and restore it to its State 'as new '...

  You should not have more problems with the upgrade process, you had the first time...

• Licensing has stopped working after a clean install of the operating system for CS4

  I did a clean install on my Mac Pro, now my CS4 doesn't work anymore. Gives me error code 150:30 (licensing has stopped working). I can't disable it on this computer because the help option is not available. So I can't turn it off before you uninstall and then reinstall. What is the best way to get this working again please? This is the Suite of Master CS4. Thank you...

  Hi, Del, thank you very much - I tried the correction of license options but I also do not have the same files (FlexNet), so I reinstalled and my app are now opens again.

  All happy it is now resolved!

  Kind regards

  Carmen

• My msn (homepage) arrives... .canot be dealt with at the moment and shows a blank page. It started about 10 days ago. Nothing has been added/changed on the copmputer. Vista operating system

  My msn now empty poster with the wordersa (home page) "application cannot be processed at this time, try again later.  This has happened for about ten days.

  You could try a system restore:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  Or:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question in the Forum of Internet Explorer above.

  See you soon. Mick Murphy - Microsoft partner

• Reinstall the T61 WXP operating system

  Hi and thanks-

  My T61 is defective.  After spending a month with Microsoft's Service, they told me that I have to re - install Windows XP (in fact, to do a "Rpeair".)  When I start using my Windows XP disk, I get the message 'Windows XP cannot find a hard disk'. (my paraphrase of a long message)

  I bought this computer used.  The drive is a Seagate ST9320320AS SATA - 320 GB hard drive.   Windows displays a single 275 GB partition.  The person who sold me the computer (a year ago or not) told me that all the installation files are on a hidden partition.  The only other player that Windows shows me is the DVD player, d

  How can question - I reinstall my OS Winows XP?

  Thank you so much your help fair!

  to change the sata setting press F1 at power on config should be highlighted Press enter scroll down to serial ata (sata), press enter sata mode option contrller press on enter choose compatibility press F10 to save the changes (you need to do is, if you use a disk to detail MS. win xp) the only way to get into the recovery partition is well rescue & recovery http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT002492

• I RECENTLY HAD TO RESTART FROM DISK AND NOW MY AUDIO SYSTEM WILL NOT EMIT A SOUND SIGNAL

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computerREBOOT NOT of HIS
  • What you have already tried to fix the problemTRIED IN DOWNLOAD SOUND DRIVERS NOTHINGS WORKING AND YES SPEAKER CHORD EAST BRANCH

  Hello

  You have installed the drivers after the restart of the drive? If this is not the case, then install the drivers first using your disc of recovery of the driver if you have one, if you don't have one, then contact the manufacturer of your computer to a disc or download the drivers from their site. :-)

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How do I download an another CC for installation on a new hard drive? Old is dead and has been replaced, but I'm starting to any operating system.

  My CC number 1 installation went with the old, is crushed, hard drive. Installation of number 2 is on laptop. How can I download another copy for the new drive?

  Hello

  Please use the following link to download the Adobe Creative Cloud Desktop application: Download Adobe Creative Cloud apps | CC free trial Adobe

  See also,

  Download and install Adobe Creative Cloud apps

  Connect and disconnect activate Cloud Creative applications

  Download and install the non - trial apps Creative Cloud

  Let us know if that helps.

  Kind regards

  Bani

• My Yahoo toolbar has disappeared. I tried reinstalling several times but it just doesn't work.

  'My Yahoo Toolbar has disappeared'. I tried reinstalling several times but just, it will not appear in the toolbar space. I looked in the display of the toolbar and it is checked. I tried to uncheck and double check the display of the Yahoo toolbar. No luck. Help, please. I use this toolbar constantly.

  Could be. They are in the middle of the update to their servers at the moment so expect the odd mishap now and again.

  Oh, and could you click on the button 'Resolved' while he takes this thread out of the loop?

  Thank you.

• Computer that has crushed - I have to reinstall the same operating system to avoid losing files.

  Basically, everything I've read about the BSOD "Unmountable boot error" I have tells me that I have to reinstall XP. The question is can I install a different operating system and not lose all my files on the computer? Thank you

  Hello

  ·        What is the exact error message that you encounter in Blue Screen of Death (BSOD)?

  ·        You are able to boot into safe mode without any problem?

  ·        Remember to make changes to the system?

  ·        Do you have the XP CD with you?

  Method 1:

  If you have the XP disc and then start in the recovery and then console perform a disk check. I suggest you to check the below link.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/?kbid=297185

  Method 2:

  If this does not help, then you can install a parallel installation of Windows XP on the same drive and then copy the important files and folders that are present on the system to an external device (flash drive), then install a new copy of the Windows XP operating system. Follow the steps mentioned in the article given below to perform a parallel installation of Windows XP.

  Follow method 4 that is listed in the article given below to perform a parallel installation of Windows XP.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Copy the files to an external device, and then create a clean install the operating system.

  I suggest you to check the links below, if you plan to install Windows Vista or Windows 7

  Install, reinstall, and then uninstall

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  Perform a custom installation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/performing-custom-installation-Windows-7

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System was originally shipped with Windows 7, I had fixed it, but the operating system has been changed to XP. Can I use the product key on the side to reinstall Windows 7?

  Reinstalling windows 7 after re-start of windows xp

  I bought my Asus computer came with windows 7 installed, earlier this year, I encountered a problem with the blue screen to come and I was unable to fix it, when I had my computer repaired they changed the operating system to windows xp, I was wondering if with registration # or whatever is on the side if I could download and reinstall Windows 7

  If the product key on the side of your machine is for Windows 7 and where-ever you guessed it "repaired" installed Windows XP - the real question becomes where they got a product key for Windows XP?

  You have the installation media for the copy of Windows 7 OEM which is preinstalled on your computer?

  If not - you will probably need to contact Asus (this laptop?) over media restore and/or check to see if the "repair" left any which restoration method should have been used intact.

• I have no idea where my installation for my operating system discs are... but I need to reinstall a dll that I had my computer off and when he returned to the top needed to fdisk... and when he fixed things that the dll has been corrupted.

  where can I download the dll for windows vista ultimate 64 msxml4.dll?

  I tried to get my installation discs and I can't find them. I tried to contact alienware and they said to contact microsoft.
  I tried to use the features of support, but when it asked me to put in my ID of product of your Web page will not accept for any reason any.

  now what should I do?

  can you send me this dll? my email is * address email is removed from the privacy *.
  I'm fucked without my darn install disks.

  You do not qualify for FREE Microsoft Support as your Vista operating system is preinstalled, with the exception of problems with Vista SP2. () Information about this is provided below.)
  
  All the support your Vista is the manufacturer of your computer.
  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner