WIFI Link 5100 drivers 12.1.2.1 does not maintain steady speed

I have connected the DIR-855 (Dlink) to, Wifi Intel 5100 of the Qosmio and with the original drivers I can maintain a connection constantly 150Mbps (5 GHz 40 Mhz N only). After upgrading to the 12.1.2.1 I can only keep it for an hour or two before its begins to decrease and jumps from 6 Mbps to 60Mbps. The last pilot intel gives better flow and a better signal quality, but as I didn't mention that for a short period. Anyone who has tried these drivers with the same experience?

Hello

> The latest driver of intel gives better flow and a better signal quality, but as I didn't mention that for a short period. Anyone who has tried these drivers with the same experience?

I didn't try the driver Intel WLan Intel page because the WLan driver in Toshiba page works correctly.
In your case, it seems that the driver WLan from Toshiba page works better than the driver from the Intel page.
That is why I see no reason why you should use the driver directly from the Intel Web site.
Take the Toshiba WLan page and check if this problem persists.

PS: this question could be also related to the settings of the WLan card that you can find in;
Device Manager-> WLan card properties-> Advanced tab

Tags: Toshiba

Similar Questions

  • Cannot start the HP Pavilion dv7 - Intel(r) WiFi Link 5100 AGN

    the WiFi has been disabled by the Device Manager, and I can't activate it

    When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:

    "This device cannot start. (Code 10)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    When I click on "Find solutions", it displays 'could not load driver software' and no solution appears

    I tried the function "update driver" and still no idea to him.

    not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is

    Thank you!

    Hello

    You have a few options in my opinion please try these steps can help you solve your problem.

    (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

    (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

    (3) try to do a system restore to the date where unit was working fine.

    (4) Please update the Bios driver & wireless from the HP website.

    (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

    (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

    If you still have the same question so you must call HP tech support and get the replacement of the part.

  • HP ProBook s 4710: Bluetooth missing on HP ProBook 4710 s (Windows 7 64-bit) - Intel WiFi - Link 5100 AGN

    Hello

    I have a strange problem:

    I have two HP ProBook s 4710 here in front of me. The two "seems" to have the same hardware inside (I don't see any difference on the stickers in the back).

    I have install both of them with the same USB with Windows 7N 64-bit.

    After the installation is complete (no additional driver installed).

    the first bluetooth ProBook has

    the second bluetooth ProBook has NO!

    I checked the BIOS, every two active a bluetooth settings on both.

    WLAN works on both.

    On the first s I can also install the bluetooth drivers latest, on the second, I can't. Always the message occurred ("no device was detected. Make sure that... »).

    Device Manager indicates, the two ProBooks Intel WiFi - Link 5100 AGN, the first s also Bluetooth-device listed, the second of not.

    What the hell is going on here?

    Hello:

    It is very strange because the HP Wireless Assistant software is registered directly on the support page and driver 4710 under the solutions section.

    If this is the case, try the latest HP Connection Manager software which does the same thing the software assistant wireless.

    Here's the theory behind your dilemma (except radio BT died).

    This laptop once had the connection manager (since the software assistant Wireless does not) installed, and you can use this software to individually disable bluetooth or devices rather than using the wireless button wireless.

    I guess that for example, turn off the stereo bluetooth with the connection manager to save a small amount of battery power, which increases the time before having to recharge the battery.  But you can still use the wireless.

    The hardware button turns both off the coast.

    The big problem is...

    If none of these devices are turned off by the wireless assistant or the connection manager software and that you reinstall the operating system or to update or other, wireless or bluetooth devices do not appear in the Manager of devices as if they are dead or don't exist.

    And what makes this more puzzled, is that if you check the BIOS, you will see that they are present and active!

    The only way to make them work again, is to turn them on by using the Deputy Director or the wireless connection software.

    This is why it is absolutely essential to ensure that these devices have been turned on before you reinstall the operating system.

    For those people that upgrading to W10, none of these programs work on W10, so if the BT has been disabled, the user must return to W7, activate the bluetooth, uninstall the connection manager or the wireless assistant software, reboot, ensure that the device is always on and then upgrade to W10.

    Here is the link to the software of the support page for your laptop connection manager...

    FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53394.exe

    If this doesn't work or the other, I suspect that the BT module does not work (all hardware failures).

  • WiFi link 5100 AGN

    I get the "dysfunctional" message that the WIFI link 5100 AGN has a driver problem... I am running Windows 7... Troubleshooting DIFFICULTY IT has failed.  Could someone enlighten me also as to how it affects me?  I didn't notice anything in particular up to now.

    Thank you very, very much... I visited the two Intel and Dell... ran a diagnostic on Dell... then downloaded 'detector and installer for drivers' who came through good but later... much later said he finally was able to download this driver but can not install it.

    I tried several ways to download the driver from the website, but nothing is done and finally did what I probably would have done FIRST... a system restore to before that happened... but I thought that I better try to "fix" or "Reinstall" the driver anyway then came to the Community Council.

    Well, the final result is because the restaurant is back to before the problem, but I still don't know what happened to do in the first place.

  • Intel WiFi Link 5100 network card - cannot detect wireless networks

    I have a HP Pavilion dv7-1270us. My wireless card is an Intel WiFi Link 5100.

    Running Windows Vista 64 bit, Ubuntu Linux, Linux Mint and Fedora Linux (various versions, all), the wireless works fine. My desktop computers to work with wireless cards to connect to the network work very well, and all computers (except mine) to connect to my home network very well; which means that it is not a problem with wireless networks, or with my network card. I try to manually connect to the network, but it can't find it. Diagnosis requires that the card is disabled, and that I should turn it on via the switch on my laptop running: fact.

    During the installation of Windows 7 64 bit, I cannot see wireless networks (and therefore unable to connect). Re-formated and reinstalled again, check the wireless connectivity between each batch of Windows Update, but it has never worked.

    I downloaded the latest drivers from Intel, via Microsoft Compatibility Center (version 15.2.0 driver).

    There is no system restore option because he has never worked as a first step, except in all other OS, I got on the computer. Microsoft Compatibility says the map is compatible, then Device Manager shows no problems. The network adapter is active via switch on my laptop.

    Happy that you guessed it sorted!

  • Refresh your wifi Lenovo R500 Intel WiFi Link 5100 in Intel Dual Band Wireless-AC 7260

    Hello

    Anyone know if it is possible to upgrade your Lenovo R500 Intel WiFi Link 5100 wifi to Intel Dual Band Wireless-AC 7260.

    Reference to buy:

    http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

    A reference that is inside the laptop: /

    -L' a long.

    http://www.Intel.com/content/www/us/en/wireless-products/WiFi-link-5100-brief.html

    Welcome to the forum!

    You need a modded BIOS to be able to use this card in R500. Stock BIOS will not allow the machine start with him.

  • Intel(r) WiFi Link 5100 AGN installed in a Studio 17/1745

    I recently lost network connection using the-built in Intel(r) WiFi Link 5100 AGN. Stupidly, it happened while I was still under a contract of Service, but because of the holidays, I turned it off and the contract expired in mid-December.  I have a Studio 17/1745, I disconnected the internal WI - fi card and use an N of D-Link USB and I now have a WI - fi connection. Should I buy a new internal WiFi card and if so than that.

    met100,

    Places to look to see if your connection is activated

    What program anti-virus and firewall are you using? I see virus program lead to problems of connections.

    Can you run system information search REMOVE YOUR PRODUCT ID and OWNER REGISTERED, if you use XP, run an ipconfig/all log and post it here.

    Rick

  • How to reset the password for CC? -My former CC password does not work. I can't find that link 'forgot my password' My Adobe password does not work in CC

    How to reset the password for CC? -My former CC password does not work. I can't find that link 'forgot my password' My Adobe password does not work in CC

    Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  • Alternative to wireless Intel Wifi Link 5100 AGN card?

    I find that my Intel 5100 AGN wireless network card does not work as well as he used to.  I tried everything... even the drivers are perfectly up-to-date.  But I keep losing the connection to my wireless router, even if the strength of connection between 3 and 4 bars.  I find that I rarely make me fall if I have 5 bars.  But if it drops to 3, I get periodically fall any wireless network that I use.

    I want to replace this card by something better, but of course compatible with the HP dv5 (my specific model is dv5t-1000).  Any recommendations?

    "If you keep an open mind, life will give you more opportunities."

    Hi, Gary:

    What I meant by my statement about you have the best of the cards available for your laptop is that, Yes, I'm sure that the Intel 5300 is an improvement on the 5100, but the problem is that you can not install the 5300 in your notebook.

    The Intel 5300 is not supported (only the numbers of cards/coins listed in the service manual can be installed) and your laptop wouldn't start until you have removed the card.

    You can try another card in the manual, if you wish.

    However, you are limited to the:

    4322 Broadcom 802.11a/b/g/n WLAN module

    Broadcom BCM4312 802. 11 b / module g WLAN (not a N Wireless card)

    I guess you can use an external USB adapter, but I would like to get one with an external antenna connected to him, because I would have to believe that installing wire of 3 antenna in your address must provide superior reception on a simple USB wireless adapter with an internal antenna as its single antenna.

    The antennas go all the way to the top of your screen.

    Tinker you with advanced network adapter settings?  They can be found by clicking on the card in the Device Manager, click the Advanced tab.  Take note of where the parameters are now so if something is buggy, you can change their return.

    Here is a guide to the advanced settings that you have and the recommended settings for them.

    http://www.Intel.com/support/wireless/WLAN/sb/CS-025393.htm

    Paul

  • problem of Intel(r) Wifi Link 5100 AGN WiFi modem

    I have the modem title in my laptop that I inherited from my sister. I got home and it does not connect. I ran a diagnostic and it says that there is a problem with the driver. I did the update and represented the diagnosis. Same thing is happening. I went to Device Manager and not the diagnosis, and he says: I use the highest driver so far and that the modem is working properly.

    Help! A diagnosis says it does not work, it says it does. What should I do here? Any help would be appreciated!

    Hello

    Thanks for posting in Microsoft Community!

    What is the exact error you receive when you try to connect?

    You can uninstall and reinstall the drivers and check.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also contact the manufacturer for the latest drivers.

  • latest drivers for visioneer 9450 usb does not

    I download and installed the latest drivers for this scanner on W7 32 bit and it does not work. Any ideas?

    http://support.Visioneer.com/products/9450/downloads.asp

    Note the italic comment

    Or see the link KB

  • Link to Adobe Flash Player Software Distribution does not

    Hello

    I just filled out the form on the following Web site to receive a distribution license and download link: Adobe - Adobe Runtimes / reader Distribution License Agreement. In the email I received later is a download link that looks like this (without ID): http://www.adobe.com/products/flashplayer/distribution4.html?auth=xxxx. However, this link does not work. It keeps loading the page till eternity. Can someone please help me with this?

    Thank you

    This is the user to user forums.

    Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  • link work in Flash 8, but it does not work in Dreamweaver

    I made a Flash file swf that contains the button and the ball. When I put the mouse over the button, the ball pops up.
    And also I managed to attach a link to the button using action script.
    Strange thing is the link works fine when I use test movie with Flash 8 but when I insert it into Dreamweaver, although the ball works very well with the mouse, but the link does not work.
    Can someone tell me why?
    Why it works with test movie in Flash 8, but not in Dreamwever.
    Thank you much in advance.

    I have just myself solve my question.
    In a preview of Dreamweaver, the link does not work, but once the page is published, it works.
    Thank you.

  • Satellite U400-177 - low connection using Intel Wifi Link 5100

    Hello

    Recently, I have problems with my wifi connection.

    I don't know why, but now the connection is erratic, when my connection was in the recent past 30Mbps is now 1, 10 or 20 I'm talking about 1 feet near the router.

    I have the latest version of the 14.2.0.10 driver and cannot find a solution.

    I think the change of the card with a new one as the Intel® Centrino® Advanced-N 6230.
    Don't you know it is compatible?

    Thanks in advance.

    Hello

    As much as I know there is no information on the compatibility between the Wlan card and laptop computer.
    So you have to test yourself

    But if the BIOS recognizes this Wlan key correctly, then it shouldn't be a problem to use this
    According to the Wlan card specifications, this card allows connectivity to 2.4 GHz to access the old 802. 11 b / g networks and 5 GHz for higher speeds and greater capacity of the network.

    However, I m the U400 laptop owner and my WiFi works correctly.

    But I ve disabled all features for the Wlan that allows using the card with the best performance of energy saving. You can disable this in win 7 power management.

  • KB 915597 Def 1.71.26.0 updated - immediate problem of connection to the network; Intel WiFi Link 5100 AGN is present, "working properly", but "there is no network to connect to."

    My "update journal" indicates that this definition has been installed at 05:47 (Saturday 111/21), the same moment where pages failed to load and the small icon of net showed no link. (I had fortunately been web surfing until - filled bars.)

    This is an update "cannot be uninstalled." I did a restore of the system to the previous Thursday, and then to the previous week, without change in condition. . I powered completely off and on again several times, without success.

    There is a note on the update for http://go.microsoft.com/fwlink/?LinkId=52261 - who takes me to a page with a bunch of stuff on the installation of a BizTalk adapter. (snippet below included) This is way beyond my ability to understand... I DON'T know how to edit the registry, but I don't know what to change, if this ' even common sense.

    The update could have messed with the IP addresses?

    I tried net diagnostics ("no network to connect to"); I tried to add a new network - the 'check' the devices window just sits there...

    (Yes, my other devices connected wireless - works perfectly.) The computer has not been moved from its site)

    (This is a piece of the message I get from the url above)
    "You can use the BizTalk for MSMQ adapter and adapter BizTalk Message Queuing on the same computer. However, given that these two adapters use the same port, you must add an IP address to your computer as BizTalk adapt for MSMQ can use. »

    [1] I bought the Dell in August as 64-bit extensible and Dell sent me a Win7 disc...

    [2] indeed, McAfee came with the machine as a trial version...

    [3] I think I might start by reinstalling the Win7 update...

    A1. The Dell computer came with Vista 64-bit SP1 edition? [Yes/No]

    A2. Your current McAfee application is supported in Windows 7 64 bit? [Yes/No]

    If the free trial version of McAfee is always installed, when the free trial period expire?

    If you have purchased McAfee application, did you do before the expiration of the free trial period?  [Yes/No]

    You never downloaded & run a utility named McAfee Consumer Product Removal Tool? [Yes/No]

    A3. Please do not confuse the upgrade your version of Windows with 'update your computer' (e.g. Windows Update), especially in these forums.

    If you've upgraded to Win7 64-bit, you can't "start over by reinstalling the Win7 [upgrade]." If you want to reinstall Windows, you need to reinstall Vista SP1, and then reapply the upgrade to Win7.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for