Have a VM on a USB Stick 2/3?

Similar Questions

• Problem with ZTE MF190 Dongle (USB Stick Modem)

  I have a ZTE MF190 Dongle (USB Stick Modem), which is a plug-and-play device. It was to find work on my Windows 7 Ultimate with my Acer Aspire 4720Z but recently it does not HSPA or any other signal, unless I have to uninstall and reinstall all the time before using it. When I do this, it installs the following drivers:

  Composite USB device
  ZTE Diagnostics Port (COM6)
  ZTE to Port (COM7)
  ZTE ATExt2 Port (COM5)
  With a Modem ZTE USB owner
  Network adapter Broadband Mobile ZTE
  USB Mass storage Device
  ZTE MMC storage device

  But he informs me that "ZTE WCDMA Technologies MSM" cannot be installed.

  This missing driver would be the reason why I am facing this problem. If Yes, where can I get this coz I looked everywhere including the website of the manufacturers without result.

  Hello

  Certainly, this looks like a problem with the drivers. The manufacturer has a way you can get in contact with them at all? It is the responsibility of the manufacturer to write drivers for the devices that are compatible with Windows.
  Another thing to do is to make sure to have all your drivers chipset update of the website of the manufacturer of the computer.
  You say that you have an Acer, so go here: http://support.acer.com/us/en/default.aspx
  You can find model specific computer and download all the drivers updated in need of your system.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Toshiba Regza 46VL743G - playing files via USB stick

  Hello

  I have problems with playback music and videos via USB. I tried to format my USB for different file systems (ntfs, fat, ms - dos, for example) and video formats, but the screen is black, I launch the media player.

  My TV has played with MS-DOS Format the photos, but no mp3 or divx/avi files. I run the multimedia player with 'video' the led of the USB stick flashes, but after a few seconds the led turn off (I think that the stick loses power).
  My other TV (LG 55LE7510 55 '') plays all video files and mp3 without any problem (ntfs and video format *.avi)

  Someone has an idea?

  Hey,.

  Have you tried another USB key and the same thing happens with another USB key? Usually, you use the FAT32 format for your USB key. Then the TV will be able to recognize it and all the files it contains.

  According to the specifications of your TV supports jpeg files (USB and SD card), MP3 (USB) and video DivX SD (USB).

• HP require a new 32 G USB stick "" not labeled as compatible with Win 8."

  OS Win Pro 8.1

  Product: HP500-125

  Question: HP Recovery set using the USB.

  Problem: HP require a new USB stick 32 G ""not labeled as compatible with Win 8. "I don't have to buy such a stick in my place (Brisbane, Australia).

  Can you help me?

  CherylG.

  I have for the usb drive that you suggested, and it happened today however it does not resolve the difficulty, even if the product is satisfactory. Consults with the HP support has finally confirmed that the provided HP recovery media software does not work with Win 8.1Pro with media library.

  So, in a way, the problem is solved by default... I used successfully in place of Windows Recovery Media Creator.

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Recovery USB - stick (DVD player does not) Acer Aspire 7750 G

  Hello world

  My DVD player does not work for quit some time. This is no big problem for me, because one barely use it.

  Unfortunately, it is not possible to burn recovery DVD. In my view, it has an option to do a recovery USB drive. It would be a great solution! Unfortunately I do not have the possibility to do so. Is this only possible for computers without an optical drive? Is it possible to download the program with the option to use a USB - stick as in the YouTube video?

  YouTube instructionvideo

  Thanks in advance,

  Richard

  You can try to work around the problem, since I'm not sure that Acer was already an eRecovery on windows version 7 which allows to create USB recovery media.

  This free software allows you to create a virtual DVD/rw drive and use it to create an iso file, then you can ise this iso file to create a USB stick recovery using rufus:
  of http://www.techsupportalert.com/content/TotalMounter-Free-Virtual-CDDVD-Burner-that-facile-use.htm

  http://Rufus.AKEO.IE/

• Is it possible to copy my files to a USB stick and use it as a backup?

  * Original title: computer problem

  Hi guys, first of all excuse my English because it is not my natural language. My problem is this: I think that my office is stressful on me. It's freezing and sometimes it does not start. I'm trying to back up my files, but I'm not. Is it possible to copy my files to a USB stick and use it as a backup? If so should what files I back up? Is it possible to do a reinstall? I have a Dell OptiPlex 745 with windows vista ultimate. Any help would be welcome.

  Kind regards

  Leslie

  Hello

  How to make a backup of files:

  Go to the file/s you want to put (Documents, music, Photos, etc. in Windows Explorer) > right click on it/them > hover over send it to the mouse cursor > select external hard drive or Memory Stick that you plugged them to save.

  And it's method of Dell to backup your data and reinstall of the operating system:

  Restore your Computer´s software to factory for Windows Vista settings

  http://www.Dell.com/support/article/au/en/aubsd1/SLN117599?c=au&l=en&s=BSD&CS=aubsdt1

  See you soon.

• Code 31, for my 2 GB USB - stick USB Device Manager,

  Hello world

  I use a HP pavilion a610t, 32, Vista premium edition, 2. 4 g, 3 G of ram, w, 4USB ports. I installed a gang self-powered USB 2.0 w/10 usbs, sometimes it turns on at startup, sometimes not and I re - plug for my system to recognize. I don't see the error messages for the band, but I got an error for 2G USB - stick in the Device Manager: code 31, tried to reinstall a driver or driver update, but it says driver is up to date. the appliance works once it is on. Is that what the problem of the USB - stick or tape USB? Also, at startup I get all my other USB devices including media Pocket Bay K: entry w/PC OEM pop ups asking what I want to do and if I want to scan or to execute without scan, I tried scanning to see and it did nothing, I didn't not lose my media in the device either. I also code 10 for my reader to CD-DVD E: that ejects and turns but does not load the driver so I don't see anything, I tried all the suggestions, reload driver, Plug connections, high-low own filters, re - install the driver, all to nothing does not. Device Manager still shows my drive with a flag and error 10 (driver may not load) are 2 separate issues but I have listed both, because they may be related, I want to understand the thumbdrive, firstly because it is a new problem, and I use my allot USB drives to save all my important files. The problem with the drive, I tried all the suggestions so far, if someone has any ideas to help I would be very grateful
  Thank you all, boulonman/Alan

  Hello

  It doesn't seem to be a model available in HP you specified.
  See the site:
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=HP+Pavilion+a610t#n41
  I suggest you to check the model number again.
  The CD/DVD software burning should be uninstalled to uninstall or change a program and not Device Manager.

• Storage of USB STICK 16 GB Duracell (FTP gel...)

  I have a lot of problems with my WRT610N Version 1.0 with the help of a Duracell 16 GB storage USB STICK (gel etc...). When copying large files (1 GB) in FTP, the router freeze and also the internet connection is cut off, I have to power/turn off the router. I did tests with Duracell USB formatted in NTFS and FAT32 also. The Duracell USB works fine connected directly to a PC.

  If I use an another USB STICK as Verbatin EVERYTHING is OK.

  Do you know a fix for this problem? Is there a list with brands of USB keys tested?

  Thank you

  You can consult this website and you will find the compatible USB Drives with WRT610N router.

• Installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Rufus can create a bootable copy instead:

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

• Cannot run the moment TV/Radio Internet USB Stick in 64-bit Windows 7

  It was a gift and I want to play with it! The brochure says it will work with Windows 7. There is no apparent technical support available. The driver loaded OK. When I tried to run, I got the MSINET. The OCX error. I searched on computer, found MSINET. OCX in C:\Windows\System32 and pasted in C:\Windows\SysWOW64. The next attempt to run, I learned a COMDLG32. The OCX error. I searched that and copied and pasted. The next time I got a script error:

  Line: 1

  Char: 1

  Error: 'Text2' is not defined

  Code: 0

  URL: subject: empty

  He asks if I want to continue running scripts on the page but it won't let me not click 'Yes' or 'No' then he does not close unless I eject the usb key.  Customer Internet also later than December include people who executed him and those who is crazy, they can get it to run. I think that it runs with 32 bit Windows 7 but I don't know if it does.

  Anyone have any ideas?

  Hi Dona,

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you're the script error message when using Instant Internet TV/Radio USB Stick in Windows 7.

  Which web browser you are using?

  Please follow the steps in the link.

  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Fusion 6.0.5 - cannot start EFI USB stick

  It is supposed to be easy to start EFI USB stick.

  So I made sure that I have few of them created (USB3 & USB2, big 32 GB, small 256 MB, different OS bootable EFI)

  While they work in physical with UEFI boot machines and also in my computer 11

  

  Fusion 6.0.5 is a go.

  None of the tested USB gets listed in the EFI shell (all screenshots are made using the same USB on Windows 7 x 64 & ML 10.8.5)

  

  EFI Shell version is lower (2.30) in W11 then Fusion 6.0.5 (2.31), but it would make a difference?

  SEB

  Updated to merge 7.0.1 & all works even as 11 workstation.

  Also same version EFI Shell 2.31

  So obviously F6 was the problem

  SEB