have b110 printer all in one, stopped printing yellow.

Similar Questions

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• I have a 7410 all-in-one printer. Is power on but it will not be printed.

  I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions

  This is usually caused by a failure of the wireless LAN card.  You can solve this problem, as shown on this page.  Unplug the connector on the wireless card will disable wireless and correct the problem.  Since you're using USB shouldn't be a problem.

• HP Officejet 4620 e-all-in-one stop wireless print whenever it is turned off

  My HP 4620 stop wireless print whenever it is turned off, although it is connected to the network (by the results of the test network wireless, pass & the quality of the signal is excellent).  No troubleshooting - HP Print & Scan Doctor work there is no help, I have to uninstall & reinstall the printer each time to be able to print wireless again.

  I use it on/on button to turn the printer off, don't disconnect not.

  Please help, or I need to return to the store, this is the third time!

  I also had the same issue and after a few game it seemed to have fixed so here's what I did... Hope this helps someone else.

  -My printer is connected to my wireless network.

  -On my computer that I'm connected to the printer through the IP address 192.168.1.153... (Yours may vary) in a browser

  * You can find the ip address printers on the control panel of the printers by pushing the wireless button and pushing the ok option 1, it should appear with the intensity of the signal and the ip address is at the bottom.

  -Once I was on the Printers page in my browser, I went to the tab network at the top.

  -Then to Internet Printing Protocol section (on the left in the advanced settings)

  -On my own PPI was already on, but the location was empty I put a '1' in the location box and then applied settings.

  -C' is the only thing that I changed and now my printer is asleep as always, but when I print something from my iphone, mac or pc it wakes up and prints as it is supposed to!

  BTW before I went to the printer via the browser. I changed layout sleep in 15 minutes via the Control Panel on the printer itself, don't know if it helped the issue or not because I still had the problem of sleep after I set the timer to 15 minutes instead of 5 min. But I solved my problem after performing the steps above!

  Also note that on the one hand some ppl on here say it's a network problem or a router! This is NOT the case I never even tried these roads and I solved my problem only by changing the setting of the printer! I have not set a static ip address or something like that!  The above steps is things ONLY I touched and my problem is SOLVED!

  Router: NETGEAR AT & T 7550 wireless router/dsl Modem

  -Security: WPA2-PSK (AES)

  -Printer connected to the router via WPS (push button configuration)

  Printer: HP Officejet 4620e all-in-one

  Computer: Apple iMac OS X Version (connected to the network via wifi) 10.7.5

  Dell running Windows 7 server (connected to the network via wifi)

  Apple iPhone 4S (connected to the network via wifi)

• NO HP DEVICE HAVE BEEN DETEDTED all-in-one printer, HP Deskjet F380 range

  Dear HP

  I need help on this error NO HP DEVICES HAVE BEEN DETEDTED

  Range of all-in-one printers HP Deskjet F380

  # At the time of the opening of the HP solution center to

  NO HP DEVICES HAVE BEEN DETEDTED

  # windows xp pro with sp 2

  # a printer install on pc (network printer hp 3055)

  gigabyte g41 combo #.

  Respect of
  Kundan Shinde

  Follow the steps from the link below:

  http://support.HP.com/us-en/document/c02468684

• I have a G510n all-in-one Officejet wireless that does not print in Cyan.

  The cartridges are full, I cleaned the printheads several times, made all the diagnostic tests, restarted the computer, reinstalled the software and drivers.  I can't align the print heads because the scanner cannot see blue lines due to their not printing not.  The printer is out of warranty, so I need to know if I need to trash or is there another solution for this problem.  Following a forum, the person said it was chip problem, but did not specify how they fixed it.  Coult it will be the same question?  Any suggestions would be extremely useful.

  Thank you.  I called and you have a printer replacement for Iwould less pay at the store.  Simple and effective.  I appreciate the help.

• Have HP C4210 all in one, but now that windows 7 and cannot be installed.

  I just bought HP TouchSmart all in a 310-1125Y with Windows 7. I have an old HP Photosmart C4210 printer all-in-one. Tried to install the original shipped with the printer CD, but does not recognize Windows 7. I will not be able to use the Solutions Center HP which is located on the CD and cannot download said HP is on the CD. What can I do?  My printer works fine.

  Thank you

  Duke

  Hello

  Setup of full software functionality for Windows 7 is on the link below - download this and save it to your desktop.

  http://ftp.HP.com/pub/softlib/software11/COL30096/MP-74842-1/PS_AIO_C4200_NonNet_Full_Win_WW_130_140.exe

  Once the download is complete, double-click the installer to start the installation.  If you use a wired connection, do not connect the printer to the PC until the software asks you to.

  Kind regards

  DP - K

• I have a J4680 all-in-One and there is a blocked file in the queue that prevent me from printing

  I can't remove a file from the queue; It is a recurring problem.  I followed the usual deletion process, but I can't dleete this precise issue and so cannot print anything that follows.

  I have Vista OS.

  Hello

  In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• HP 6812 All In One: stop a print session

  How to stop a print job while it is printing? Recently, I've printed 20 unnecessary pages.

  Sherrodwaterboy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your message want to kill a print in Win10 job and wanted to help.
  
  Here are the instructions: http://www.dummies.com/how-to/content/how-to-cancel-a-print-job-in-windows-10.html
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP L7780 all-in-one stops abruptly print cyan ink - would - this software problem?

  
  

  Yes, I think that the print head is the cause. You try to run a few times to see if you can lead it.

  If you want to keep the other cartridge, put it in a lock back zip and place it in the refrigerator.

  Good luck

  Kyle

• I have a HP All In One Printer 6700 and when I scan a photo that some of it appears on my MacBook.

  This is a photo 8 x 10 and no matter what I do, only a quarter of it appears on my computer.  I am incredibly stupid feeling right now and don't know what to do to solve this problem.  Any advice?  Thank you!

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• OfficeJet pro 8500 all-in-one: black and yellow ink does not print. brand new

  Can I return the cartridges that do not work? Or is there another solution?

  The document here can help solve the black and yellow print not on you Officejet 8500.  Black and yellow print does not correctly, I guess the Black/Yellow Printhead, which is a part of repalceable, but I suggest you to go through all the steps in this document in order.

• HP OFFICE JET 6210 ALL IN ONE: stop hp 6210 all-in-one fax receive automatically once I have improved the line of pots to voip line

  I had printer for 6-7 years and never had a problem. I up graded my phone att pots line (plain old telephone system) the system to voip (voice over internet phone). I never had a problem to send and receive faxes. Now, I can only send faxes and not receive them, even with the automatic reply button on! The only rings (6210 HP) fax. Chat with people to send faxes reports the 6210 indicates the machine is busy, which is not the case. I checked the telephone connections and cables and still get the same results. I have checked the filters and hooked up to another fax machine (hp 8500 A909a) with the same results. I downloaded a updateded printer driver and still get the same results. I noticed when I sent a fax test fax hp service test, they sent a fax to the back but the fax would only ring unless I press the black / touch of color, it will leave a fax come through. Y at - it a remedy to this new problem. Help.

  Hi @MACMAN55 and welcome to the Forums of HP.

  I understand that you are having problems of fax. I would like to help.

  Switch to a VoIP system may cause problems.  The fax machine is designed to operate with an analog installation.

  I'm including a couple of documents with more information, as well as instructions on how to get the best performance from a line VoIP:

  Faxing on a voice over Internet Protocol (VoIP) Service

  Fax VoIP services

  Please let me know if you have any questions.  Thanks for posting on the HP Forums.

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers

• have 4630 HP all-in-one... can not find a driver to download

  Printer says it is set up wireless, but I can't find a place to download the printer on the computer. I have a mac 10.5x8

  Hello

  I'm afraid there are no drivers for Mac OS X 10.5, the printer is supported on OS X 10.6 or more.

  You can find the system requirements below:

  http://support.HP.com/us-en/document/c03839855

  You will either need to upgrade your operating system to 10.6 or newer or replace the printer to another model who support your operating system.