Windows configures the State!

Similar Questions

• Receive message "Please wait while windows configures the status" and then "the component that you are trying to use is on a CD Rom, please insert". I don't have the CD. How can I stop this?

  Windows Setup status

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  I did all the steps that have been mentioned earlier and no results.  I even did a system recovery.  I don't know what to delete.  Please help thanks

  Hello

  These messages usually mean that you have a problem with the HP printing software

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

• Windows configures the status

  Wen I turn on the computer, message reads please wait while Windows configures status... then the second message is... ... There's a DVD to complete something or other and then "wait while windows configures the State" I have to cancel this operation at least 10 times before it goes.  Please help... what a nuisance!

  Hello

  Maybe a file autorun.inf in the root of the drive or enter another start that was not removed after an update. Check the root of C: to the .inf file and delete it if found. Otherwise, use a tool like autoruns from the link below to locate and remove the reference:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• CC 2014 - packaging failure: anything happen beyond the windows of the statement

  Hello

  I have a problem my file on InDesign CC (2014) packaging:

  Nothing happen after the windows of the statement.

  Window, or message. However InDesign to quit as soon as I close the file with which the package fail to occur.

  I could do until (all with the option of pdf creation and idml) a few days ago, I have no updates of any sort (adobe, apple or other), but I can't not the package.

  Kind regards

  FDurand

  Hello

  I solve my problem by deleting the InDesign preferences (library > Prefrences > InDesign).

  FDurand

• Please wait while windows configures the microsoft broadband network

  Whenever I turn my laptop on a Microsoft Broadband Networking window appears saying "Please wait while windows configures microsoft broadband networking" and then the green status bar stops about 1/3 of the way and if I try to open any programs that everything freezes.  Can anyone help!

  (Moved from other/unknown)

  Please provide more information.

  1. what version of windows is installed on your laptop?

  2. is there an error message that you receive after the failure of the MSBBN Setup?

  I suggest to update the firmware of the Device MSBBN, follow the steps in this link.

  https://support.Microsoft.com/kb/814445?WA=wsignin1.0

• Why do I get 'Please wait while windows configures the Mocrosoft Office 2010 single Image'

  I down loaded Office 2010 and now whenever I go into Outlook, I get the Message "Please wait while windows configures Microsoft Office single Image 2010" and the e-mail option im search box does not work. He said still "no results found".

  See the suggestions in the thread below link to start outlook without the configuration window: -.

  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/thread/48a99c98-E923-4D29-9f81-8fa1a1ce7c71

• How to restore xp professional window into the State of manufacturing?

  Received a pc from a friend with professional xp operating system.

  http://us.yhs4.search.yahoo.com/yhs/search;_ylt=A0oGdOIrBG1O4EQA1QCl87UF;_ylc=X1MDMjE0MjQ3ODk0OARfcgMyBGZyA2FsdGF2aXN0YQRmcjIDc2EtZ3AEZ3ByaWQDBG5fZ3BzAzEwBG9yaWdpbgNzeWMEcG9zAzQEcHFzdHIDBHF1ZXJ5A2hvdyB0byByZXN0b3JlIHdpbmRvd3MgeHAEc2FjAzEEc2FvAzE-?p=how%20to%20restore%20windows%20xp&fr=altavista&fr2=sa-gp>

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-to-restore-my-XP-Pro-to-original-manufactures/80269dbe-f1a5-4d77-AD12-0dd907a1965e>

  UTC/GMT is 18:58 on Sunday, September 11, 2011

• Configure the 'status '.

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  Thank you

  Hello Donlongley,

  This happens if you or someone else have installed a piece of software that needs some additional information that resides on a drive, in any case you can work around this problem by disabling this software from the start.

  Here's what you need to do, restart your computer as usual and wait for the message to come to the top, now try to recognize the name of this software and write it down. (its ok if you can't get a name).

  Now remove it from Start Up items by following these steps:

  1. press the windows start button and choose run or (press the 'WindowsLogo + R' on your keyboard)
  2 type "msconfig" without the quotes of course, in the text box and click on enter or click ok.
  3. If you run vista System Configuration utility may ask you for permission, click on continue.
  4. once the System Configuration utility has started, click on the Startup tab.
  5 disable any software that you do not want to be on the start up.
  6. click ok and restart your computer, that guest will be history now :))

• Muse is not let me change the color of the text in different States - "changes to text can be edited or formatted by the State [...]"

  When I watch tutorials on the buttons of the State etc.. I see that Muse allows you to select different States, then highlight the text and change the color to set the color of the text in this State.

  But whenever I select the State I want to change, and then select my text and change its color, it changes the color of all States as a default color to be applied only for a State.

  I get the message "text ranges cannot be edited or formatted by the State. Change to this mode effect all States. "in the window of the States while text is highlighted.

  But people seem to be able to do it just like that. Any help is very appreciated.

  Hello

  States are associated with blocks of text rather than the text itself. Please make sure that the entire text block is selected instead of text to apply changes on different States.

  Please see the attachment.

  Kind regards

  Neha

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How configure the list the Windows 7 firewall exceptions to allow the blocked IP?

  I have a Web site set up in my trusted sites to access, but a contextual dialog box of security is blocked and I can not connect.  How to configure the firewall for a pinhole camera?

  Unfortunately, the link you provided goes to answers for Windows server, not Win7Pro, but I got the idea.

  I found this statement, (that I neglected before,) on the page for the Windows Firewall:

  Firewall Windows with advanced security is designed for use by COMPUTER administrators who need to manage network security in an enterprise environment. It is not intended for use in home networks. Home users should consider using the Windows Firewall program available in the Panel.

  It also begins to help.  I have another question to try to set up the FTP, and it is to change the default port 21 to something else.  Unfortunately, even if the programs allowed Windows Firewall prompt indicates change port settings, click on "change setitings", when I do, I'm only able to enter the program of applications, not to define the ports.

  Oh, well.  I guess the only provision I have is port forwarding in my router, and if it doesn't work, I'm outta luck.

  In the meantime, at least I know now how to set exclusions for programs.  I still don't know how to set the permission for a specific IP address, but...  Thank you.  Your comment has helped (indirectly).

• Qosimo F20: WLan adapter forget window allows you to configure the settings

  I recently changed a linksys wireless router to bt home hub but white since doing so I have been informed of bt, the wireless network adapter (intel (R) PRO/Wireless 2200BG Network adapter)

  I use keep forgetting window allows you to configure the settings. so every now and again I have to right-click on the icon in the lower right, choose View available wireless networks, click on change advanced configuration, and then click on the tab and then wireless networks check use windows to configure the box at the top left.

  I'm very novice all help would be appreciated.

  Post edited by: johnsmith3131

  Hello John

  As you know all configurations can be specific and depend on the used material. Believe me on this path it is not easy to say something concrete, because the BT home hub white is unknown to me and can I just suggest that you carefully read the user manuals which must be detailed explain how to connect external devices to the hub.

  By the way: you have something like this http://digital-lifestyles.info/display_page.asp?section=distribution&id=3404?

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Configure the xbox with windows vista wireless controller

  I recently bought a wireless Xbox 360 controller to use for playing mainly with Call of Duty 4 on my PC
  I followed all the instructions and have the wireless receiver but cannot operate at all which is extremely frustrating
  I have an install 32-bit windows vista Home premium
  Can someone please

  Hello Foxesfan1.

  First step would be to ensure that the controller is actually seen correctly by Windows.  I'll assume that you have already synced the controller and the wireless receiver by pressing the button on the receiver and the little one on top of the controller.

  To make sure that the controller is configured correctly in Windows start tying the game controllers in the box start the search on Windows 7, the option is called installation USB game controllers.  It could be called game controllers or something similar on Windows Vista, I have here in front of me to check.

  Anyway it should open a window called game controllers, the controller must be in there, in this case click Properties and check that all buttons work properly.

  If it is then its probably does not work because Call of Duty either is not setup in support of controllers (a ride in his options to enable the controllers support), or simply does not support at all, not all areas of PC games. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)