Have problems to import images!

Similar Questions

• My lightroom is having problems to import images, I tried a different card with the same results readers

  My lightroom/mac is having problems to import images, I tried a different card with the same results readers

  This means that ccouldn can't ccopy Lightroom photos in the destination directory. You must determine which directory is specified in the Lightroom Import dialog box, it is on the right in the Destination. Then, you will need to enter your operating system and change the permissions on this specific issue to the WRITE permission.

• Problems with importing images

  When I try to import images, I always get the following message:

  

  I used 5.7 Lightroom on an iMac, OS X El Capitan. This problem started after the update to El Capitan.

  Can you create a new folder named "Images" and put a few images inside folders?

  Lightroom by default creates the catalog in the folder "Images" and it is necessary to launch Lr.

  ~ Assani

• I have problems to import DNxHD files in first - ideas?

  Hello

  I'm really stuck... I recently shot about 5 hours of footage of helicopter of the coast here in Cornwall (United Kingdom) by using the helicopter companies sony HDcam.

  Unfortunately as I do all my work on P2 and CF cards I don't have the equipment to capture images from of HDcam tapes.

  I used a guy associated with the helicopter company to take images from strips and place it on a hard drive that I could pick up and change. He was convinced that the best bet is to encode the files in the avid DNxHD codec - and that I would be able to import and edit first. I assumed that he was right because I always managed to import the files, .mxf P2 card with no problems at all.

  Anyway to get to the point - I got the hard drive earlier in the day and the Prime Minister is unwilling to play ball at all - I get the message "the file has an unsupported compression type" whenever I try and import it.

  I downloaded the AvidCodecsLE to my mac - but no joy...

  Any thoughts would be much appreciated

  See you soon

  Mark

  Ah, I see what he was doing. He captured the HDCAM tapes in the Avid, which captures images in an envelope of MXF files. It does not really matter the codec; all Avid captures are MXF files. What he did was give you captured files, which you can tell by the hodgepodge file name and extension MXF. He probably took right to your external drive.

  Unfortunately, even if the codec is DNxHD (probably), first will not work with MXF wrapped DNxHD. first works with MXFs, but only if they are camera generated such as a P2 or XDCAM camcorder. Had exported QuickTime MOV DNxHD encoded, that would be another story. First'd crack those opened without problem.

  About the only way you will get in these files is to open up with a greedy and export the necessary QuickTime files. You can also try After Effects, if you have access to it; I had some strange and unexpected things like this before. If it works, you can configure comps for each clip and restore them to a usable file first; With DNxHD QuickTime is still probably your best choice.

• I have problems to import photos from the Canon EOS 70 d in Lightroom on a macbook pro

  When I try to import photos from my Canon EOS70D in Lightroom, first I get "Preview not available for this file" for all files on the camera. If I check a few photos to import Lightroom said then that's important but the pictures never import and eventually I have to cancel the import. I tried to import a picture and this same thing is happening.

  I don't think that is the cable or the camera that I can import into iPhoto from the camera using the same cable.

  All advice appreciated.

  It's ok thank you, I found the problem. I have to let the camera connected to the laptop for a while. Finally, all files have thumbnails, and then I can import them. I tried before import them too quickly.

• Problems to import still Images; Convert all in the SAME Image

  Hello

  I am new to Adobe first CS_5 (usually use of the CPF).  I have problems to import still images.  Even if the images are all different and have unique names (I'm importing .jpg), every time I have import the images that they ALL convert the image even when I drag them to my timeline.  So, when I look in the project - any image area, I click on, they are all the same (but with their original names).  Anyone know WHY this happens and how I can fix this problem?  For the life of me, I can't understand it.  Thank you in advance for the noob.

  Kalei

  It's definitely weird! What are the names of the jpg files? The only thing I can think is that if they have the same base with sequential numbering name, then perhaps they are imported into several instances of the same sequence of image.

• Problems to import Mpeg2 IMX

  We have problems to import Avid Mpeg2 IMX files in Adobe after effects CC. It is a Dell with Windows 7 64 bit computer. Importing images looks like this when they are imported into After Effects:

  

  We don t know if it's a codec issue or material. We have installed AVID QuickTime CODECs Pack EP v2.3.7 but the problem persists. Do you know why this could happen?

  Thank you in advance.

  We are currently testing a fix to do this, so I have confidence that we will be able to post a fix for this problem relatively quickly. We are targeting a release this spring, and we hope to be able to include this fix in this version.

• I cannot import images using lightroom 4

  I have before you import images into lightroom 4 and now it says that I can't import the photos here are the jpgs and files cr.s

  Thanks, Victoria

  Fix permissions of the drive solved the problem for me!

  Thank you

• Problems to import my Drone Elements first Bebop MP4 files.

  I have problems to import my Drone Elements first Bebop MP4 files. Original file seems crisp and beautiful, but after importation of Premiere Elements, all sorts of 'ghosts', glitter details etc. appears. Using PC and import (self) normally. Please help, because the result is not at all satisfactory. Help, please.

  First 13 elements should give you excellent results with STROKE in 1920 x 1080 video.

  What version of Premiere Elements do you use?

  I see that the Bebop shoots in 1920 x 1080. What is the format of the video?

  In most cases, Premiere Elements will automatically set your project according to the specifications of your video - but sometimes this does not happen with MOV files. Go to the Edit menu and note the settings of the project. The program provides up to 1920 x 1080 at 30 fps?

  Have you ensured that you have the latest version of Quicktime, by the requirements of the program?

• Problem handling placed images

  I have problems with the images that I place.  In the past, I've 'saved' as pdf or print to PDF from excel figures, could then place the image in Illustrator, release the clipping masks and Ungroup to manipulate the image.  Since a week ago, I can no longer disassociate or release clipping masks these placed PDF files.  I use Adobe Illustrator CS5, 15.1.0 and excel for mac 2011 version, version 14.4.7.  I don't remember installing updates on either recently, but a month or two that I've worked with Illustrator, so it is possible that I have installed an update that I don't remember.  (I tried to put the old images that I have correctly placed and handled before, and I can't handle them, either).  Any ideas would be greatly appreciated.

  You must nest and then release the clipping mask

• Menu Spry, problems with background images in Internet Explorer

  Hello

  Looking for help from someone more qualified than me with some menus spry.  I have problems with background images don't show is not for some of my items menu in Internet Explorer.  Safari and firefox seem to accept it's ok.

  Here is a link to the menu: http://www.scottbrownwebdesign.com/beta/HTML/index.html

  and here is a link to the spry .css: http://www.scottbrownwebdesign.com/beta/HTML/SpryAssets/SpryMenuBarHorizontal.CSS

  I know that these are the elements that have the drop down or the side of the arrows.  I can't have two background images that I can?

  Thanks in advance,

  -Scott

  My first thought...

                       display: inline;          f\loat: left;          background: #FFF;
  
  Try declaring the background-image here as well... where it says not to mess with unless you know what you are doing.
  
  I'm just guessing though. If I had more time I'd look into it further but I do not.
  

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• Import Images from the PS and LR problem

  Hi all

  Since my last update App, I experienced some problems when you import images from LR into PS

  1. where, in LR, I select 2 or more images of 'open as layers in PS', I get a Pop Up telling me that I need the latest version of Camera Raw... It is up to date according to my account.

  2. once I finished with the photos in PS and save them in LR... the final image is ebb in different areas of the strip of film...  Sometimes it is the first image... sometimes, it's the last image...  I have the set to Capture time.  It slows down my work flow in organizing my photos.   I photograph the real estate and the placement of the final images is crucial.

  All the tips are greatly appreciated.

  Thank you...

  Brian

  This bug has been recognized by Adobe.  Please add your vote me too, and the details of your problem to this bug in the Adobe official feedback forum report: Lightroom: sort by Capture time. Community customer Photoshop family . He will make more Adobe likely to give priority to a solution and inform you immediately when the bug status.

• When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  This happens even with pictures taken on another device, not just mine.  My daughter told me that the phone fell recently.  The yellow streak isn't nowhere elsewhere on the laptop, right on the photos in LR.

  It happens when you import new images. This pourrait indicate that the sector where the pictures are copied to is damaged. But it could be a faulty card reader or a bad cable if you connect the camera directly to the computer. It's a hardware problem. Your challenge is to figure out where this problem.

• Can I import images of DVD on my HARD drive through Bridge (I have Win 7

  Hello

  I use Win 7 (and also to have bridge on Mac OS X). I would like to import images of DVD on my HDD via Adobe Bridge. But I can't find the option to import DVDs in bridge (whether in Windows 7 or Mac). My DVD player on my Win machine is external, so that I have the regular internal DVD on my Macbook Pro drive. I'm trying to import pictures from DVD to HDD via Bridge. Pass the first round selection/reject by the bridge and then bring them to LR for more changes.

  I copy them now the DVD drive in a USB key. And then using the dialog box import Bridge (when I plug the USB again) copy on my HARD drive. I'm doing this because I need to batch rename my files, add metadata and keywords on import. These additions will not allow the function of simple copy/move and so I have to resort to this workaround from USB DVD on the HARD drive (across bridge). If I can import directly from DVD via Bridge, it will save me some time.

  Looking forward help pls.

  THX,

  Chinmoy

  I feel a bit silly now. For 2 days, I struggled and then posted my Q.

  After posting the Q, I thought about it in about 15 minutes.

  Insert the DVD.

  BR open

  Navigate to DVD

  Select all images

  Right-click - Batch Rename

  Choose the Destination path and the new file name.

  And go!

  If you have had the same problem, I did, hope this helps.