Have to disconnect/reconnect to the router

Similar Questions

• My internet keeps disconnecting even if the router works fine. He maintains have diagnosed as a DNS error any.

  I have a Samsung RV511 which is only a couple of years.  It has been disconnected from the internet every 2 to 5 minutes or more, but my router works fine.  I got a new power cord, ethernet for her, but the computer continues to disconnect. When I diagnose the problem, it indicates the server DNS does not.  Tried to contact my internet provider, but they couldn't understand why I didn't know every little thing on my computer and made me feel pretty stupid so I'm curious to see if anyone else out there it can help.

  I used to get this problem.  My connection would get a yellow top warning symbol & I could no longer communicate on the internet.  No Windows diagnosis could correct & would only sometimes identify [as a DNS problem].

  I searched for advice, but never really found a convincing explanation or an appeal.  I started using the commands below [that I found in this forum] to restore things.  It seemed most of the working time.

  Several people also suggest just reset the router, but that was irrelevant, because I haven't used one but I tried to remove and then reconnect the modem USB and sometimes helped.

  The problem seems to occur in phases, but I could never understand what was different between the good times & bad times.  I've always suspected the software controlling my USB modem but could never be sure.  I changed the USB modem & the problem went away for months before returning [but less frequently than before].  Now, I have a wireless connection with my mobile phone and use it as my modem for internet connection - 5 months without problem.

  What I did was to open a command prompt [I think he should be executed as administrator], then type:

  netsh winsock reset
  RESTART THE PC
  netsh int ip reset
  RESTART THE PC
  ipconfig/flushdns
  ipconfig/registerdns
  RESTART THE PC

  As I say, this procedure allows to sort out most of the time, but it should reappear later.

• Computer constantly disconnects / reconnect to the wireless network

  original title: vista renamed wirelessnetwork House and now computer laptop will constantly disconnect and then reconnect a few more seconds later

  Every since rename home network wireless computer laptop under vista constantly disconnects and reconnects to the network.

  Hi, Camstaylor,

  1. it's not your router, but it comes to your network

  2. the network card to the same place is shown router because you go out through a router

  3. to change the network name 2 for what you want, open Network Center and simply click on the icon/image(for home network it is picture of house) left on the network name and the name of the new type

  You can then safely delete the old unused network

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/6c0c6188-9c47-4907-aa37-1b53a071cb60

• Brief disconnection/reconnection of the startup disk boot failure causes

  Hello

  My system: Windows 7 ultimate, ASUS MB, 24 G of Ram, Intel i7 3950
  Boot OCZ SSD 512 G drive
  WDC 2T SATA HD X 2

  I need the serial number of the SSD drive boot, so I stopped the machine, pulled the plug of the power, disconnected the SATA cable and the power cable and removed the SSD to the Bay, has copied serial number, put the power back in place, plugged back in and started the system.

  It took a while, and then I got the Windows splash screen, then a BSOD.

  A restart attempt led to the repair of Windows program. He could not fix it. When it is restarted, the problem details include 'CorruptRegistry' and 'AutoFailover.

  Looks like I'll have to restore from an image on one of the SATA drives. Should be OK.

  But I'm curious (and a little angry) on why this simple action would lead to this?

  Any thoughts would be greatly appreciated.

  (I'm obviously the announcement of another system!)

  Jack

  Hi Jack,

  You are welcome.

  If you have additional questions on the computer, please report the issue on Windows and we will be happy to help you.

• I get the message "You have been disconnected" - can not connect to download applications

  I get the message "You have been disconnected", even after the CC update. I created a new account today and have tried to uninstall and reinstall CC, but nothing has changed.

  Cannot access my account = impossible to download or access the apps that I need for work.

  After checking the forums, it seems to have occurred to many people. I wouldn't not so antsy if it wasn't for the fact that I need to immediately access a project.

  The cat does not, so someone please HELP!

  Val

  OK, so I've resorted to Twitter, but a lovely person under the name of Britt @AdobeCare gave me a helping hand, we were able to solve the problem. I post the links she sent me, I hope they will be useful to anyone who has the same problem.

  Solution 2 is what did it for me:

  http://helpx.Adobe.com/creative-cloud/KB/unknown-Server-Error-launching-cc.html

  I'm on a Mac, and the only problem I have encountered, it was that I couldn't reach the folder from the library of my user name (I think that the file was hidden) which prevented me to find the file opm.db that should be deleted.

  If this happens to you, try this:

  Open Finder, click Go (next to file, display, editing, etc.) and click go to folder...

  Then type in /Users/ [insert your profile name] / Library/Application Support/Adobe/OOBE

  That will reveal the opm.db that needs to be deleted.

  Click here for other ways to find the hidden folder: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  This is ultimately what has worked for me. After you delete the .db file, I revived CC and signed without problem.

  Hope this is useful to someone!

  XO

  Vale

• RE6500: no connection after the router main stop or restart (WPA related?)

  Hello!

  I can not get my RE6500 to reconnect after a router main reboot or power failure, even if I restart the expander control.

  I have to open a session and revalidate the basic settings.

  However, when I connect the expander control for my android phone, used as access point, it always reconnect after a reboot of the phone.

  But I noticed a dialog box (when I select the router from my ISP for the first time) saying WPA is unsecure (WPA2 is not available on the router).

  If I connect the expander control to my phone AP, there is no dialog box because it uses WPA2.

  Is there a relationship? Is there a dialog box hidden when the expander control trying to reconnect to the router?

  Of course, the firmware is up-to-date.

  Thanks in advance for your help.

  Kind regards

  Ed

  Good troubleshooting. You have narrowed down the problem on the router device. I recommend that you buy a new router because the router you have looks like this very outdated.

• Reset the router - questions

  Hello

  My family and I use the Linksys E1000 router for some time and just yesterday my laptop began to have some problems. I don't know where to start, so I guess I'll just start from the beginning.

  I was at my local college library using the Internet. I closed the lid of my laptop, put on the mode 'sleep', knowing that the class I had then would be not long. However, events conspired to made me forget that I even had my laptop until later in the night, when I was home around 6:30 a. After opening the lid, I found that while my computer has recognized the Cisco wireless network, he was not identified. I stopped, tried again. Disconnected. Stop. Turn it back on. All of these variables on the laptop. Finally I went out to the living room where our router and restart it, unconsciously it rest for too long - and the entire router decided to restart.

  With this, our wireless set came down, and none of the computers were able to connect to the Internet. After a few hours of troubleshooting (my knowledge of comes down to I have a sneaking suspicion about how do to reboot a router so I apologize for the apparent inability), I was able to get through Cisco Connect and launch a new wireless - our network name network thus changing NiceTiger for the original name of the router, then the use of CC - FancyPenguin. I was (and am) able to type the IP address in the bar of my browser, connect, change settings and all that good stuff, but I can't always connect to the Internet. It shows on my network card that I am connected to the router (on my laptop), but it shows that the router cannot connect to the Internet. I tried turning it off modem, turn off the router, thing 2 minutes and nothing worked. The wireless router is connected to the PC out in the living room, and now does not work even on the Internet for this.

  I don't know yet where to start on how to solve it. I tried the fact to unplug cables and waiting. I tried fiddling with the settings, but nothing helped. Honestly, I don't know yet what DNS or none of this means. But I am at a loss to know what to do.

  To resolve this issue is extremely important. I have an online class that I take at the College and without Internet, I can not completed by missions. My grandmother needs pay its bills and my mother runs its business online, so if someone could help, I would be very grateful.

  Thank you very much. If you need details or card or anything, just ask and I'll do my best to help you. As I said earlier, however, I'm a total noob and absolute when it comes to this sort of thing.

  Thank you and have a nice day!

  Ok.

  1. try to disconnect the ethernet cable from the modem to the PC, unplug the power supply and the battery pack inside the modem for about 30 seconds or more.

  2. always disconnect power to the router until you are finished with step 3.

  3. connect the batteries of the modem and power and wait for it to start. Once that is complete, connect the ethernet cable to the Port on the router 'Internet '.

• CPU on HP p6130y will not respond unless I have unplug and reconnect.

  CPU will not respond unless I have unplug and reconnect.  The power light turns on but the screen remains black.  Monitor works.  Sometimes it will come around after a disconnect - reconnect.  This morning I had to unplug and reconnect six times before would respond to the computer.  HP model p6130y.  AMD Phenom 9750 Quad Core processor.  Windows Vista.

  23Scorpio wrote:

  Hi old_geekster and thanks for your reply.  I tried to find a site that has the power to my computer and I'm having no luck.  Same HP does not list that they carry the power supply for my p6130y.  You have no idea where I can get this?  Do you know how much it costs?  Thanks again.

  ___________________________________________________________________________________________

  23Scorpio, it's my pleasure.

  You should be able to use any standard ATX PSU in the computer.  I suggest to measure the current PSU and comparing measures that you choose.  I like Corsair and OCZ.  The PSU is the backbone of the computer, it is not the place to save money.  Both in the links I provided are good examples of what you can use.  Read the reviews to see what users have to say about them.

  If your problem is solved, please click "accept as a Solution.

• [WNDR4500] Can not reach the router by IP (WFAdevice)

  I just tried to get into the router with IP 192.168.1.1, but get the error that it is not connect?

  With my mobile and Fing app, I see the router as a WFAdevice?

  I have not changed anything with the router, so I don't understand what has changed and how to get back into the router?

  Just rebooted the router and all is fine now

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• HP pavilion dm4-1265dx slow to reconnect to the wireless network after Awaking of the fashion watch

  I am running Win 7 and recently my wireless connection was slow to reconnect to the router after waking from sleep.  If the pc is turned on at startup wireless is fast.  I checked all the settings and even tried to put off security for my cisco E4200, but still no luck.  I also downloaded the drivers to date and bios, but still no luck.  I even checked the power management settings.  I need to some advice or assistance on this. Thank you

  Uninstall the current driver for the Intel wireless adapter.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here and check the results.

• Desktop Adobe Creative cloud says "you have been disconnected, please sign in again to continue.

  I just got a subscription for 1 year at Creative cloud earlier today to work on my college class at home. When I try to log in I get the message "You have been disconnected" immediately after the signing. I downloaded the application on a Macbook Pro to see if I get the same result, but I logged without fault. I tried the IMSLibReplacer (http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html) a couple times, but nothing changes. I have attached a picture of the application. Any advice would help!

  Thank you!

  

  Follow the solution 2 here, http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

• Satellite A500 - 17 X frequently disconnect the router wireless - weird

  Had this problem since I bought the laptop about a month ago. It connects very well to our wireless (full signal, speeds), but sporadically disconnects for no apparent reason. When I try to reconnect, the signal passes of five (full) bars up to three bars and it won't let me log in again, no matter what I try. When I click on it it loads just for a while and then said it was impossible to establish a connection. Troubleshooting / repair does nothing. The only way to fix it is to pull the power on the router and then plug it in again, resetting the connection.

  It seems that this is a problem with the router, but I have tried in other houses and it does exactly the same thing on the connections of others. Other devices are still able to use the connection after mine died. My laptop and install broadband (Virgin Media) are only one month.

  I tried to install the WLAN drivers on the toshiba site, but it changed nothing.

  Someone can think all possible solutions before you give up and take it back to the shop?

  See you soon.

  You have successfully updated the WLan driver?
  I guess you used this Toshiba WLan portal page to download driver:
  http://APS2.toshiba-tro.de/WLAN/

  Here's the latest drivers.

  I recommend updating the BIOS as well.

  Check it!

• Why users need to disconnect and reconnect to the VPN to RDP?

  Most of the time our VPN works perfectly, but sporadically users must reconnect to the VPN to use remote desktop. Is that the user can log on to the VPN and access to things like network drives, but not other features like RDP. If they disconnect and then reconnect to the VPN, poof, everything works fine. No matter if it is minutes or hours in the VPN connection, it still requires reconnection. It seems that it is always on the second attempt at the nick of this post point called 'the second time's a charm

  We are using RRAS in SBS 2008 and the problem is multiple users tempting to VPN in XP and Win7 machines. We replaced the switches (now using Dell Powerconnects) and the router (now using Cisco RV042) and the problem persists.

  Suggestions or responses are greatly appreciated.

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?